| Message ID | 1544559161-21468-3-git-send-email-eajames@linux.ibm.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | clk: aspeed: Setup video engine clocking | expand |
Hi Eddie, On Wed, 12 Dec 2018 at 06:42, Eddie James <eajames@linux.ibm.com> wrote: > > Add the video engine reset bit. Add eclk mux and clock divider table. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > Acked-by: Stephen Boyd <sboyd@kernel.org> > --- > drivers/clk/clk-aspeed.c | 41 +++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 39 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c > index 5961367..f16ce7d 100644 > --- a/drivers/clk/clk-aspeed.c > +++ b/drivers/clk/clk-aspeed.c > @@ -87,7 +87,7 @@ struct aspeed_clk_gate { > /* TODO: ask Aspeed about the actual parent data */ > static const struct aspeed_gate_data aspeed_gates[] = { > /* clk rst name parent flags */ > - [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ > + [ASPEED_CLK_GATE_ECLK] = { 0, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ > [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ > [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ > [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ > @@ -113,6 +113,24 @@ struct aspeed_clk_gate { > [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ > }; > > +static const char * const eclk_parent_names[] = { > + "mpll", Is the mpll really an input to the eclk? > + "hpll", > + "dpll", We don't have a dpll in the driver that I can see. > +}; > + > +static const struct clk_div_table ast2500_eclk_div_table[] = { Is the clocking setup different on the ast2400? > + { 0x0, 2 }, > + { 0x1, 2 }, > + { 0x2, 3 }, > + { 0x3, 4 }, > + { 0x4, 5 }, > + { 0x5, 6 }, > + { 0x6, 7 }, > + { 0x7, 8 }, > + { 0 } > +}; > @@ -317,6 +338,7 @@ struct aspeed_reset { > [ASPEED_RESET_PECI] = 10, > [ASPEED_RESET_I2C] = 2, > [ASPEED_RESET_AHB] = 1, > + [ASPEED_RESET_VIDEO] = 6, You've added the reset line to the ASPEED_CLK_GATE_ECLK clock so you do not need to separately expose the reset controller. Instead enabling the clock will deassert the rest line for you. This means you should drop the change from the header too, and it affects the bindings document for the video engine. > > /* > * SCUD4 resets start at an offset to separate them from > @@ -522,6 +544,22 @@ static int aspeed_clk_probe(struct platform_device *pdev) > return PTR_ERR(hw); > aspeed_clk_data->hws[ASPEED_CLK_24M] = hw; > > + hw = clk_hw_register_mux(dev, "eclk-mux", eclk_parent_names, > + ARRAY_SIZE(eclk_parent_names), 0, > + scu_base + ASPEED_CLK_SELECTION, 2, 0x3, 0, > + &aspeed_clk_lock); > + if (IS_ERR(hw)) > + return PTR_ERR(hw); > + aspeed_clk_data->hws[ASPEED_CLK_ECLK_MUX] = hw; > + > + hw = clk_hw_register_divider_table(dev, "eclk", "eclk-mux", 0, > + scu_base + ASPEED_CLK_SELECTION, 28, > + 3, 0, soc_data->eclk_div_table, > + &aspeed_clk_lock); > + if (IS_ERR(hw)) > + return PTR_ERR(hw); > + aspeed_clk_data->hws[ASPEED_CLK_ECLK] = hw; > + > /* > * TODO: There are a number of clocks that not included in this driver > * as more information is required: > @@ -531,7 +569,6 @@ static int aspeed_clk_probe(struct platform_device *pdev) > * RGMII > * RMII > * UART[1..5] clock source mux > - * Video Engine (ECLK) mux and clock divider > */ > > for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) { > -- > 1.8.3.1 >
On 12/13/2018 07:02 PM, Joel Stanley wrote: > Hi Eddie, > > On Wed, 12 Dec 2018 at 06:42, Eddie James <eajames@linux.ibm.com> wrote: >> Add the video engine reset bit. Add eclk mux and clock divider table. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> Acked-by: Stephen Boyd <sboyd@kernel.org> >> --- >> drivers/clk/clk-aspeed.c | 41 +++++++++++++++++++++++++++++++++++++++-- >> 1 file changed, 39 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c >> index 5961367..f16ce7d 100644 >> --- a/drivers/clk/clk-aspeed.c >> +++ b/drivers/clk/clk-aspeed.c >> @@ -87,7 +87,7 @@ struct aspeed_clk_gate { >> /* TODO: ask Aspeed about the actual parent data */ >> static const struct aspeed_gate_data aspeed_gates[] = { >> /* clk rst name parent flags */ >> - [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ >> + [ASPEED_CLK_GATE_ECLK] = { 0, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ > >> [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ >> [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ >> [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ >> @@ -113,6 +113,24 @@ struct aspeed_clk_gate { >> [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ >> }; >> >> +static const char * const eclk_parent_names[] = { >> + "mpll", > Is the mpll really an input to the eclk? Yep, it's the default. > >> + "hpll", >> + "dpll", > We don't have a dpll in the driver that I can see. True... I supposed I would just add the parent here now in case the dpll clock is ever added. > >> +}; >> + >> +static const struct clk_div_table ast2500_eclk_div_table[] = { > Is the clocking setup different on the ast2400? Yes, the dividers are the default ast2400 ones. > >> + { 0x0, 2 }, >> + { 0x1, 2 }, >> + { 0x2, 3 }, >> + { 0x3, 4 }, >> + { 0x4, 5 }, >> + { 0x5, 6 }, >> + { 0x6, 7 }, >> + { 0x7, 8 }, >> + { 0 } >> +}; >> @@ -317,6 +338,7 @@ struct aspeed_reset { >> [ASPEED_RESET_PECI] = 10, >> [ASPEED_RESET_I2C] = 2, >> [ASPEED_RESET_AHB] = 1, >> + [ASPEED_RESET_VIDEO] = 6, > You've added the reset line to the ASPEED_CLK_GATE_ECLK clock so you > do not need to separately expose the reset controller. Instead > enabling the clock will deassert the rest line for you. > > This means you should drop the change from the header too, and it > affects the bindings document for the video engine. I want that reset available separately for use in the video engine actually. I could do without it, but it's somewhat useful. Thanks, Eddie > >> /* >> * SCUD4 resets start at an offset to separate them from >> @@ -522,6 +544,22 @@ static int aspeed_clk_probe(struct platform_device *pdev) >> return PTR_ERR(hw); >> aspeed_clk_data->hws[ASPEED_CLK_24M] = hw; >> >> + hw = clk_hw_register_mux(dev, "eclk-mux", eclk_parent_names, >> + ARRAY_SIZE(eclk_parent_names), 0, >> + scu_base + ASPEED_CLK_SELECTION, 2, 0x3, 0, >> + &aspeed_clk_lock); >> + if (IS_ERR(hw)) >> + return PTR_ERR(hw); >> + aspeed_clk_data->hws[ASPEED_CLK_ECLK_MUX] = hw; >> + >> + hw = clk_hw_register_divider_table(dev, "eclk", "eclk-mux", 0, >> + scu_base + ASPEED_CLK_SELECTION, 28, >> + 3, 0, soc_data->eclk_div_table, >> + &aspeed_clk_lock); >> + if (IS_ERR(hw)) >> + return PTR_ERR(hw); >> + aspeed_clk_data->hws[ASPEED_CLK_ECLK] = hw; >> + >> /* >> * TODO: There are a number of clocks that not included in this driver >> * as more information is required: >> @@ -531,7 +569,6 @@ static int aspeed_clk_probe(struct platform_device *pdev) >> * RGMII >> * RMII >> * UART[1..5] clock source mux >> - * Video Engine (ECLK) mux and clock divider >> */ >> >> for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) { >> -- >> 1.8.3.1 >>
Quoting Eddie James (2018-12-14 07:47:53) > > > On 12/13/2018 07:02 PM, Joel Stanley wrote: > > > > >> + { 0x0, 2 }, > >> + { 0x1, 2 }, > >> + { 0x2, 3 }, > >> + { 0x3, 4 }, > >> + { 0x4, 5 }, > >> + { 0x5, 6 }, > >> + { 0x6, 7 }, > >> + { 0x7, 8 }, > >> + { 0 } > >> +}; > >> @@ -317,6 +338,7 @@ struct aspeed_reset { > >> [ASPEED_RESET_PECI] = 10, > >> [ASPEED_RESET_I2C] = 2, > >> [ASPEED_RESET_AHB] = 1, > >> + [ASPEED_RESET_VIDEO] = 6, > > You've added the reset line to the ASPEED_CLK_GATE_ECLK clock so you > > do not need to separately expose the reset controller. Instead > > enabling the clock will deassert the rest line for you. > > > > This means you should drop the change from the header too, and it > > affects the bindings document for the video engine. > > I want that reset available separately for use in the video engine > actually. I could do without it, but it's somewhat useful. > Joel, are you happy with these patches? I'm tempted to drop these changes from my queue because there hasn't been any news in over a month.
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 5961367..f16ce7d 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -87,7 +87,7 @@ struct aspeed_clk_gate { /* TODO: ask Aspeed about the actual parent data */ static const struct aspeed_gate_data aspeed_gates[] = { /* clk rst name parent flags */ - [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ + [ASPEED_CLK_GATE_ECLK] = { 0, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ @@ -113,6 +113,24 @@ struct aspeed_clk_gate { [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ }; +static const char * const eclk_parent_names[] = { + "mpll", + "hpll", + "dpll", +}; + +static const struct clk_div_table ast2500_eclk_div_table[] = { + { 0x0, 2 }, + { 0x1, 2 }, + { 0x2, 3 }, + { 0x3, 4 }, + { 0x4, 5 }, + { 0x5, 6 }, + { 0x6, 7 }, + { 0x7, 8 }, + { 0 } +}; + static const struct clk_div_table ast2500_mac_div_table[] = { { 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */ { 0x1, 4 }, @@ -192,18 +210,21 @@ static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val) struct aspeed_clk_soc_data { const struct clk_div_table *div_table; + const struct clk_div_table *eclk_div_table; const struct clk_div_table *mac_div_table; struct clk_hw *(*calc_pll)(const char *name, u32 val); }; static const struct aspeed_clk_soc_data ast2500_data = { .div_table = ast2500_div_table, + .eclk_div_table = ast2500_eclk_div_table, .mac_div_table = ast2500_mac_div_table, .calc_pll = aspeed_ast2500_calc_pll, }; static const struct aspeed_clk_soc_data ast2400_data = { .div_table = ast2400_div_table, + .eclk_div_table = ast2400_div_table, .mac_div_table = ast2400_div_table, .calc_pll = aspeed_ast2400_calc_pll, }; @@ -317,6 +338,7 @@ struct aspeed_reset { [ASPEED_RESET_PECI] = 10, [ASPEED_RESET_I2C] = 2, [ASPEED_RESET_AHB] = 1, + [ASPEED_RESET_VIDEO] = 6, /* * SCUD4 resets start at an offset to separate them from @@ -522,6 +544,22 @@ static int aspeed_clk_probe(struct platform_device *pdev) return PTR_ERR(hw); aspeed_clk_data->hws[ASPEED_CLK_24M] = hw; + hw = clk_hw_register_mux(dev, "eclk-mux", eclk_parent_names, + ARRAY_SIZE(eclk_parent_names), 0, + scu_base + ASPEED_CLK_SELECTION, 2, 0x3, 0, + &aspeed_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + aspeed_clk_data->hws[ASPEED_CLK_ECLK_MUX] = hw; + + hw = clk_hw_register_divider_table(dev, "eclk", "eclk-mux", 0, + scu_base + ASPEED_CLK_SELECTION, 28, + 3, 0, soc_data->eclk_div_table, + &aspeed_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + aspeed_clk_data->hws[ASPEED_CLK_ECLK] = hw; + /* * TODO: There are a number of clocks that not included in this driver * as more information is required: @@ -531,7 +569,6 @@ static int aspeed_clk_probe(struct platform_device *pdev) * RGMII * RMII * UART[1..5] clock source mux - * Video Engine (ECLK) mux and clock divider */ for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {