@@ -19,21 +19,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
-static void spinand_cache_op_adjust_colum(struct spinand_device *spinand,
- const struct nand_page_io_req *req,
- u16 *column)
-{
- struct nand_device *nand = spinand_to_nand(spinand);
- unsigned int shift;
-
- if (nand->memorg.planes_per_lun < 2)
- return;
-
- /* The plane number is passed in MSB just above the column address */
- shift = fls(nand->memorg.pagesize);
- *column |= req->pos.plane << shift;
-}
-
static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
{
struct spi_mem_op op = SPINAND_GET_FEATURE_OP(reg,
@@ -227,27 +212,21 @@ static int spinand_load_page_op(struct spinand_device *spinand,
static int spinand_read_from_cache_op(struct spinand_device *spinand,
const struct nand_page_io_req *req)
{
- struct spi_mem_op op = *spinand->op_templates.read_cache;
struct nand_device *nand = spinand_to_nand(spinand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
- struct nand_page_io_req adjreq = *req;
+ struct spi_mem_dirmap_desc *rdesc;
unsigned int nbytes = 0;
void *buf = NULL;
u16 column = 0;
- int ret;
+ ssize_t ret;
if (req->datalen) {
- adjreq.datalen = nanddev_page_size(nand);
- adjreq.dataoffs = 0;
- adjreq.databuf.in = spinand->databuf;
buf = spinand->databuf;
- nbytes = adjreq.datalen;
+ nbytes = nanddev_page_size(nand);
+ column = 0;
}
if (req->ooblen) {
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
- adjreq.ooboffs = 0;
- adjreq.oobbuf.in = spinand->oobbuf;
nbytes += nanddev_per_page_oobsize(nand);
if (!buf) {
buf = spinand->oobbuf;
@@ -255,28 +234,19 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
}
}
- spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
- op.addr.val = column;
+ rdesc = spinand->dirmaps[req->pos.plane].rdesc;
- /*
- * Some controllers are limited in term of max RX data size. In this
- * case, just repeat the READ_CACHE operation after updating the
- * column.
- */
while (nbytes) {
- op.data.buf.in = buf;
- op.data.nbytes = nbytes;
- ret = spi_mem_adjust_op_size(spinand->spimem, &op);
- if (ret)
+ ret = spi_mem_dirmap_read(rdesc, column, nbytes, buf);
+ if (ret < 0)
return ret;
- ret = spi_mem_exec_op(spinand->spimem, &op);
- if (ret)
- return ret;
+ if (!ret || ret > nbytes)
+ return -EIO;
- buf += op.data.nbytes;
- nbytes -= op.data.nbytes;
- op.addr.val += op.data.nbytes;
+ nbytes -= ret;
+ column += ret;
+ buf += ret;
}
if (req->datalen)
@@ -300,14 +270,12 @@ static int spinand_read_from_cache_op(struct spinand_device *spinand,
static int spinand_write_to_cache_op(struct spinand_device *spinand,
const struct nand_page_io_req *req)
{
- struct spi_mem_op op = *spinand->op_templates.write_cache;
struct nand_device *nand = spinand_to_nand(spinand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
- struct nand_page_io_req adjreq = *req;
+ struct spi_mem_dirmap_desc *wdesc;
+ unsigned int nbytes, column = 0;
void *buf = spinand->databuf;
- unsigned int nbytes;
- u16 column = 0;
- int ret;
+ ssize_t ret;
/*
* Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
@@ -318,12 +286,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
*/
nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
memset(spinand->databuf, 0xff, nbytes);
- adjreq.dataoffs = 0;
- adjreq.datalen = nanddev_page_size(nand);
- adjreq.databuf.out = spinand->databuf;
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
- adjreq.ooboffs = 0;
- adjreq.oobbuf.out = spinand->oobbuf;
if (req->datalen)
memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
@@ -340,42 +302,19 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
req->ooblen);
}
- spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
+ wdesc = spinand->dirmaps[req->pos.plane].wdesc;
- op = *spinand->op_templates.write_cache;
- op.addr.val = column;
-
- /*
- * Some controllers are limited in term of max TX data size. In this
- * case, split the operation into one LOAD CACHE and one or more
- * LOAD RANDOM CACHE.
- */
while (nbytes) {
- op.data.buf.out = buf;
- op.data.nbytes = nbytes;
-
- ret = spi_mem_adjust_op_size(spinand->spimem, &op);
- if (ret)
+ ret = spi_mem_dirmap_write(wdesc, column, nbytes, buf);
+ if (ret < 0)
return ret;
- ret = spi_mem_exec_op(spinand->spimem, &op);
- if (ret)
- return ret;
+ if (!ret || ret > nbytes)
+ return -EIO;
- buf += op.data.nbytes;
- nbytes -= op.data.nbytes;
- op.addr.val += op.data.nbytes;
-
- /*
- * We need to use the RANDOM LOAD CACHE operation if there's
- * more than one iteration, because the LOAD operation might
- * reset the cache to 0xff.
- */
- if (nbytes) {
- column = op.addr.val;
- op = *spinand->op_templates.update_cache;
- op.addr.val = column;
- }
+ nbytes -= ret;
+ column += ret;
+ buf += ret;
}
return 0;
@@ -755,6 +694,59 @@ static int spinand_mtd_block_isreserved(struct mtd_info *mtd, loff_t offs)
return ret;
}
+static int spinand_create_dirmap(struct spinand_device *spinand,
+ unsigned int plane)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ struct spi_mem_dirmap_info info = {
+ .length = nanddev_page_size(nand) +
+ nanddev_per_page_oobsize(nand),
+ };
+ struct spi_mem_dirmap_desc *desc;
+
+ /* The plane number is passed in MSB just above the column address */
+ info.offset = plane << fls(nand->memorg.pagesize);
+
+ info.op_tmpl = *spinand->op_templates.update_cache;
+ desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+ spinand->spimem, &info);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ spinand->dirmaps[plane].wdesc = desc;
+
+ info.op_tmpl = *spinand->op_templates.read_cache;
+ desc = devm_spi_mem_dirmap_create(&spinand->spimem->spi->dev,
+ spinand->spimem, &info);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ spinand->dirmaps[plane].rdesc = desc;
+
+ return 0;
+}
+
+static int spinand_create_dirmaps(struct spinand_device *spinand)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ int i, ret;
+
+ spinand->dirmaps = devm_kzalloc(&spinand->spimem->spi->dev,
+ sizeof(*spinand->dirmaps) *
+ nand->memorg.planes_per_lun,
+ GFP_KERNEL);
+ if (!spinand->dirmaps)
+ return -ENOMEM;
+
+ for (i = 0; i < nand->memorg.planes_per_lun; i++) {
+ ret = spinand_create_dirmap(spinand, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct nand_ops spinand_ops = {
.erase = spinand_erase,
.markbad = spinand_markbad,
@@ -1012,6 +1004,14 @@ static int spinand_init(struct spinand_device *spinand)
goto err_free_bufs;
}
+ ret = spinand_create_dirmaps(spinand);
+ if (ret) {
+ dev_err(dev,
+ "Failed to create direct mappings for read/write operations (err = %d)\n",
+ ret);
+ goto err_manuf_cleanup;
+ }
+
/* After power up, all blocks are locked, so unlock them here. */
for (i = 0; i < nand->memorg.ntargets; i++) {
ret = spinand_select_target(spinand, i);
@@ -302,6 +302,11 @@ struct spinand_info {
__VA_ARGS__ \
}
+struct spinand_dirmap {
+ struct spi_mem_dirmap_desc *wdesc;
+ struct spi_mem_dirmap_desc *rdesc;
+};
+
/**
* struct spinand_device - SPI NAND device instance
* @base: NAND device instance
@@ -341,6 +346,8 @@ struct spinand_device {
const struct spi_mem_op *update_cache;
} op_templates;
+ struct spinand_dirmap *dirmaps;
+
int (*select_target)(struct spinand_device *spinand,
unsigned int target);
unsigned int cur_target;