[3/7] dt-bindings: net: stmmac: Add the bindings documentation for delays

Some controllers require that phy delay should be disabled. So add
optional properties rx-disable-delay and tx-disable-delay for it.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/net/stmmac.txt | 2 ++
 1 file changed, 2 insertions(+)

On Wed, Jan 02, 2019 at 02:47:25PM +0530, Vinod Koul wrote:
> Some controllers require that phy delay should be disabled. So add

If the MAC requires it, then the compatible string should imply this. If 
it depends on the PHY, then okay.

> optional properties rx-disable-delay and tx-disable-delay for it.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  Documentation/devicetree/bindings/net/stmmac.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> index cb694062afff..ec18897e22c8 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -74,6 +74,8 @@ Optional properties:
>  	- snps,mb: mixed-burst
>  	- snps,rb: rebuild INCRx Burst
>  - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
> +- rx-delay-disable: bool, when present disable the rx delay
> +- tx-delay-disable: bool, when present disable the tx delay

Needs a vendor prefix.

>  - Multiple RX Queues parameters: below the list of all the parameters to
>  				 configure the multiple RX queues:
>  	- snps,rx-queues-to-use: number of RX queues to be used in the driver
> -- 
> 2.20.1
>

HI Rob,

On 11-01-19, 09:01, Rob Herring wrote:
> On Wed, Jan 02, 2019 at 02:47:25PM +0530, Vinod Koul wrote:
> > Some controllers require that phy delay should be disabled. So add
> 
> If the MAC requires it, then the compatible string should imply this. If 
> it depends on the PHY, then okay.

Thanks for the review, yes this was targeted to PHY. After feedback
from Andrew, I have removed this is v2 posted earlier!

On 1/11/19 7:01 AM, Rob Herring wrote:
> On Wed, Jan 02, 2019 at 02:47:25PM +0530, Vinod Koul wrote:
>> Some controllers require that phy delay should be disabled. So add
> 
> If the MAC requires it, then the compatible string should imply this. If 
> it depends on the PHY, then okay.
> 
>> optional properties rx-disable-delay and tx-disable-delay for it.
>>
>> Signed-off-by: Vinod Koul <vkoul@kernel.org>
>> ---
>>  Documentation/devicetree/bindings/net/stmmac.txt | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
>> index cb694062afff..ec18897e22c8 100644
>> --- a/Documentation/devicetree/bindings/net/stmmac.txt
>> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
>> @@ -74,6 +74,8 @@ Optional properties:
>>  	- snps,mb: mixed-burst
>>  	- snps,rb: rebuild INCRx Burst
>>  - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
>> +- rx-delay-disable: bool, when present disable the rx delay
>> +- tx-delay-disable: bool, when present disable the tx delay
> 
> Needs a vendor prefix.

Indeed, and it would actually be nicer to allow specifying delays
directly in ps units, see:

Documentation/devicetree/bindings/net/dwmac-sun8i.txt
Documentation/devicetree/bindings/net/mediatek-dwmac.txt

for examples.