diff mbox series

jffs2: ensure wbuf_verify is valid before using it.

Message ID 20181020120849.65708-1-houtao1@huawei.com
State New, archived
Delegated to: David Woodhouse
Headers show
Series jffs2: ensure wbuf_verify is valid before using it. | expand

Commit Message

Hou Tao Oct. 20, 2018, 12:08 p.m. UTC
Now MTD emulated by UBI volumn doesn't allocate wbuf_verify in
jffs2_ubivol_setup(), because UBI can do the verifcation itself,
so when CONFIG_JFFS2_FS_WBUF_VERIFY is enabled and a MTD device
emulated by UBI volumn is used, a Oops will occur as show in the
following trace:

    general protection fault: 0000 [#1] SMP KASAN PTI
    CPU: 6 PID: 404 Comm: kworker/6:1 Not tainted 4.19.0-rc8
    Workqueue: events_long delayed_wbuf_sync
    RIP: 0010:ubi_io_read+0x156/0x650
    Call Trace:
     ubi_eba_read_leb+0x57d/0xba0
     ubi_leb_read+0xe5/0x1b0
     gluebi_read+0x10c/0x1a0
     mtd_read+0x112/0x340
     jffs2_verify_write+0xef/0x440
     __jffs2_flush_wbuf+0x3fa/0x3540
     jffs2_flush_wbuf_gc+0x1b1/0x2e0
     process_one_work+0x58b/0x11e0
     worker_thread+0x8f/0xfe0
     kthread+0x2ae/0x3a0
     ret_from_fork+0x35/0x40

Fix the problem by checking the validity of wbuf_verify before
using it in jffs2_verify_write().

Cc: stable@vger.kernel.org
Fixes: 0029da3bf430 ("JFFS2: add UBI support")
Signed-off-by: Hou Tao <houtao1@huawei.com>
---
 fs/jffs2/wbuf.c | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Hou Tao Dec. 9, 2018, 6:35 a.m. UTC | #1
ping ?

On 2018/10/20 20:08, Hou Tao wrote:
> Now MTD emulated by UBI volumn doesn't allocate wbuf_verify in
> jffs2_ubivol_setup(), because UBI can do the verifcation itself,
> so when CONFIG_JFFS2_FS_WBUF_VERIFY is enabled and a MTD device
> emulated by UBI volumn is used, a Oops will occur as show in the
> following trace:
> 
>     general protection fault: 0000 [#1] SMP KASAN PTI
>     CPU: 6 PID: 404 Comm: kworker/6:1 Not tainted 4.19.0-rc8
>     Workqueue: events_long delayed_wbuf_sync
>     RIP: 0010:ubi_io_read+0x156/0x650
>     Call Trace:
>      ubi_eba_read_leb+0x57d/0xba0
>      ubi_leb_read+0xe5/0x1b0
>      gluebi_read+0x10c/0x1a0
>      mtd_read+0x112/0x340
>      jffs2_verify_write+0xef/0x440
>      __jffs2_flush_wbuf+0x3fa/0x3540
>      jffs2_flush_wbuf_gc+0x1b1/0x2e0
>      process_one_work+0x58b/0x11e0
>      worker_thread+0x8f/0xfe0
>      kthread+0x2ae/0x3a0
>      ret_from_fork+0x35/0x40
> 
> Fix the problem by checking the validity of wbuf_verify before
> using it in jffs2_verify_write().
> 
> Cc: stable@vger.kernel.org
> Fixes: 0029da3bf430 ("JFFS2: add UBI support")
> Signed-off-by: Hou Tao <houtao1@huawei.com>
> ---
>  fs/jffs2/wbuf.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
> index c6821a509481..3de45f4559d1 100644
> --- a/fs/jffs2/wbuf.c
> +++ b/fs/jffs2/wbuf.c
> @@ -234,6 +234,13 @@ static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
>  	size_t retlen;
>  	char *eccstr;
>  
> +	/*
> +	 * MTD emulated by UBI volume doesn't allocate wbuf_verify,
> +	 * because it can do the verification itself.
> +	 */
> +	if (!c->wbuf_verify)
> +		return 0;
> +
>  	ret = mtd_read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
>  	if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
>  		pr_warn("%s(): Read back of page at %08x failed: %d\n",
>
Hou Tao Dec. 15, 2018, 1:24 p.m. UTC | #2
ping ?

On 2018/12/9 14:35, Hou Tao wrote:
> ping ?
> 
> On 2018/10/20 20:08, Hou Tao wrote:
>> Now MTD emulated by UBI volumn doesn't allocate wbuf_verify in
>> jffs2_ubivol_setup(), because UBI can do the verifcation itself,
>> so when CONFIG_JFFS2_FS_WBUF_VERIFY is enabled and a MTD device
>> emulated by UBI volumn is used, a Oops will occur as show in the
>> following trace:
>>
>>     general protection fault: 0000 [#1] SMP KASAN PTI
>>     CPU: 6 PID: 404 Comm: kworker/6:1 Not tainted 4.19.0-rc8
>>     Workqueue: events_long delayed_wbuf_sync
>>     RIP: 0010:ubi_io_read+0x156/0x650
>>     Call Trace:
>>      ubi_eba_read_leb+0x57d/0xba0
>>      ubi_leb_read+0xe5/0x1b0
>>      gluebi_read+0x10c/0x1a0
>>      mtd_read+0x112/0x340
>>      jffs2_verify_write+0xef/0x440
>>      __jffs2_flush_wbuf+0x3fa/0x3540
>>      jffs2_flush_wbuf_gc+0x1b1/0x2e0
>>      process_one_work+0x58b/0x11e0
>>      worker_thread+0x8f/0xfe0
>>      kthread+0x2ae/0x3a0
>>      ret_from_fork+0x35/0x40
>>
>> Fix the problem by checking the validity of wbuf_verify before
>> using it in jffs2_verify_write().
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 0029da3bf430 ("JFFS2: add UBI support")
>> Signed-off-by: Hou Tao <houtao1@huawei.com>
>> ---
>>  fs/jffs2/wbuf.c | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
>> index c6821a509481..3de45f4559d1 100644
>> --- a/fs/jffs2/wbuf.c
>> +++ b/fs/jffs2/wbuf.c
>> @@ -234,6 +234,13 @@ static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
>>  	size_t retlen;
>>  	char *eccstr;
>>  
>> +	/*
>> +	 * MTD emulated by UBI volume doesn't allocate wbuf_verify,
>> +	 * because it can do the verification itself.
>> +	 */
>> +	if (!c->wbuf_verify)
>> +		return 0;
>> +
>>  	ret = mtd_read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
>>  	if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
>>  		pr_warn("%s(): Read back of page at %08x failed: %d\n",
>>
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
> 
>
Richard Weinberger Dec. 16, 2018, 11:56 p.m. UTC | #3
On Sat, Oct 20, 2018 at 2:06 PM Hou Tao <houtao1@huawei.com> wrote:
>
> Now MTD emulated by UBI volumn doesn't allocate wbuf_verify in
> jffs2_ubivol_setup(), because UBI can do the verifcation itself,
> so when CONFIG_JFFS2_FS_WBUF_VERIFY is enabled and a MTD device
> emulated by UBI volumn is used, a Oops will occur as show in the
> following trace:
>
>     general protection fault: 0000 [#1] SMP KASAN PTI
>     CPU: 6 PID: 404 Comm: kworker/6:1 Not tainted 4.19.0-rc8
>     Workqueue: events_long delayed_wbuf_sync
>     RIP: 0010:ubi_io_read+0x156/0x650
>     Call Trace:
>      ubi_eba_read_leb+0x57d/0xba0
>      ubi_leb_read+0xe5/0x1b0
>      gluebi_read+0x10c/0x1a0
>      mtd_read+0x112/0x340
>      jffs2_verify_write+0xef/0x440
>      __jffs2_flush_wbuf+0x3fa/0x3540
>      jffs2_flush_wbuf_gc+0x1b1/0x2e0
>      process_one_work+0x58b/0x11e0
>      worker_thread+0x8f/0xfe0
>      kthread+0x2ae/0x3a0
>      ret_from_fork+0x35/0x40
>
> Fix the problem by checking the validity of wbuf_verify before
> using it in jffs2_verify_write().
>
> Cc: stable@vger.kernel.org
> Fixes: 0029da3bf430 ("JFFS2: add UBI support")
> Signed-off-by: Hou Tao <houtao1@huawei.com>

Reviewed-by: Richard Weinberger <richard@nod.at>

BTW: Are you actually using glubi? It is on my list of things I'd like
to kill. :-)
diff mbox series

Patch

diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index c6821a509481..3de45f4559d1 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -234,6 +234,13 @@  static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
 	size_t retlen;
 	char *eccstr;
 
+	/*
+	 * MTD emulated by UBI volume doesn't allocate wbuf_verify,
+	 * because it can do the verification itself.
+	 */
+	if (!c->wbuf_verify)
+		return 0;
+
 	ret = mtd_read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify);
 	if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
 		pr_warn("%s(): Read back of page at %08x failed: %d\n",