@@ -184,6 +184,7 @@ olimex_a64_olinuxino_defconfig: *defconfig
olimex_imx233_olinuxino_defconfig: *defconfig
openblocks_a6_defconfig: *defconfig
orangepi_lite_defconfig: *defconfig
+orangepi_lite2_defconfig: *defconfig
orangepi_one_defconfig: *defconfig
orangepi_one_plus_defconfig: *defconfig
orangepi_pc2_defconfig: *defconfig
@@ -954,6 +954,7 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
F: board/orangepi/orangepi-pc2/
F: board/orangepi/orangepi-prime/
@@ -972,6 +973,7 @@ F: configs/engicam_imx6ul_isiot_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
F: configs/orangepi_pc2_defconfig
F: configs/orangepi_prime_defconfig
new file mode 100644
@@ -0,0 +1,4 @@
+label linux-4.18.0-rc3
+ kernel /Image
+ devicetree /sun50i-h6-orangepi-lite2.dtb
+ append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
new file mode 100644
@@ -0,0 +1,33 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h6-orangepi-lite2.dtb",
+ "extlinux"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8192
+ size = 1040384 # 1MB - 8192
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
new file mode 100755
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
new file mode 100644
@@ -0,0 +1,35 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Lite2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Lite2 link:
+http://www.orangepi.org/Orange%20Pi%20Lite%202/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
+
+How to build
+============
+
+ $ make orangepi_lite2_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
+is on the serial line, 115200 8N1.
new file mode 100644
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.18 series
+BR2_KERNEL_HEADERS_4_18=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="h6-v1.0a"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_lite2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-lite2"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Lite2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
Add initial support for Orangepi Lite2 board with below features: - U-Boot 2018.09 - Linux 4.19.0-rc8 - Default packages from buildroot Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 + board/orangepi/orangepi-lite2/extlinux.conf | 4 ++ board/orangepi/orangepi-lite2/genimage.cfg | 33 +++++++++++++++ board/orangepi/orangepi-lite2/post-build.sh | 4 ++ board/orangepi/orangepi-lite2/readme.txt | 35 +++++++++++++++ configs/orangepi_lite2_defconfig | 47 +++++++++++++++++++++ 7 files changed, 126 insertions(+) create mode 100644 board/orangepi/orangepi-lite2/extlinux.conf create mode 100644 board/orangepi/orangepi-lite2/genimage.cfg create mode 100755 board/orangepi/orangepi-lite2/post-build.sh create mode 100644 board/orangepi/orangepi-lite2/readme.txt create mode 100644 configs/orangepi_lite2_defconfig