driver/FSL SATA: Update RX_WATER_MARK for TRANSCFG

RX_WATER_MARK sets the number of locations in Rx FIFO that can be used before
the transport layer instructs the link layer to transmit HOLDS. Note that it
can take some time for the HOLDs to get to the other end, and that in the
interim there must be enough room in the FIFO to absorb all data that could
arrive.

Update the new recommended value to 16.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git (branch master)

 This patch is already gone through review of linuxppc-dev mail list.
 Making CC linuxppc-dev@lists.ozlabs.org

 drivers/ata/sata_fsl.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

Hi Jeff,

I am not finding any comments on this.

Could you please ACK this patch so that it can be applied in external list. 

--Prabhakar

> -----Original Message-----
> From: Kushwaha Prabhakar-B32579
> Sent: Monday, March 07, 2011 10:00 AM
> To: linux-ide@vger.kernel.org
> Cc: jgarzik@pobox.com; meet2prabhu@gmail.com; linuxppc-
> dev@lists.ozlabs.org; Kushwaha Prabhakar-B32579
> Subject: [PATCH] driver/FSL SATA: Update RX_WATER_MARK for TRANSCFG
> 
> RX_WATER_MARK sets the number of locations in Rx FIFO that can be used
> before the transport layer instructs the link layer to transmit HOLDS.
> Note that it can take some time for the HOLDs to get to the other end,
> and that in the interim there must be enough room in the FIFO to absorb
> all data that could arrive.
> 
> Update the new recommended value to 16.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
>  git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> (branch master)
> 
>  This patch is already gone through review of linuxppc-dev mail list.
>  Making CC linuxppc-dev@lists.ozlabs.org
> 
>  drivers/ata/sata_fsl.c |   12 ++++++++++++
>  1 files changed, 12 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index
> 895771c..29d2f29 100644
> --- a/drivers/ata/sata_fsl.c
> +++ b/drivers/ata/sata_fsl.c
> @@ -186,6 +186,11 @@ enum {
>  	COMMANDSTAT = 0x20,
>  };
> 
> +/* TRANSCFG (transport-layer) configuration control */ enum {
> +	TRANSCFG_RX_WATER_MARK = (1 << 4),
> +};
> +
>  /* PHY (link-layer) configuration control */  enum {
>  	PHY_BIST_ENABLE = 0x01,
> @@ -1305,6 +1310,7 @@ static int sata_fsl_probe(struct platform_device
> *ofdev,
>  	struct sata_fsl_host_priv *host_priv = NULL;
>  	int irq;
>  	struct ata_host *host;
> +	u32 temp;
> 
>  	struct ata_port_info pi = sata_fsl_port_info[0];
>  	const struct ata_port_info *ppi[] = { &pi, NULL }; @@ -1319,6
> +1325,12 @@ static int sata_fsl_probe(struct platform_device *ofdev,
>  	ssr_base = hcr_base + 0x100;
>  	csr_base = hcr_base + 0x140;
> 
> +	if (!of_device_is_compatible(ofdev->dev.of_node, "fsl,mpc8315-
> sata")) {
> +		temp = ioread32(csr_base + TRANSCFG);
> +		temp = temp & 0xffffffe0;
> +		iowrite32(temp | TRANSCFG_RX_WATER_MARK, csr_base +
> TRANSCFG);
> +	}
> +
>  	DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
>  	DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
>  	DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
> --
> 1.7.3


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html