| Message ID | 08b40429e46626f4caf8e4d2287b5c4d354e3b7f.1542824904.git.mesihkilinc@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | initial support for "suniv" Allwinner new ARM9 SoC | expand |
Hi Mesih, On Wed, Nov 21, 2018 at 09:30:38PM +0300, Mesih Kilinc wrote: > The new F-series SoCs (suniv) from Allwinner use an stripped version of > the interrupt controller in A10/A13 > > Add support for it in irq-sun4i driver. > > Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> > --- > drivers/irqchip/irq-sun4i.c | 104 +++++++++++++++++++++++++++++++------------- > 1 file changed, 74 insertions(+), 30 deletions(-) > > diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c > index e3e5b91..7ca4a4d 100644 > --- a/drivers/irqchip/irq-sun4i.c > +++ b/drivers/irqchip/irq-sun4i.c > @@ -28,11 +28,21 @@ > #define SUN4I_IRQ_NMI_CTRL_REG 0x0c > #define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) > #define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) > -#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) > -#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x) > +#define SUN4I_IRQ_ENABLE_REG(x) (irq_ic_data->enable_req_offset + 0x4 * x) > +#define SUN4I_IRQ_MASK_REG(x) (irq_ic_data->mask_req_offset + 0x4 * x) You shouldn't have all the values you use passed as argument, so irq_ic_data should be one of them here. > +#define SUN4I_IRQ_ENABLE_REG_OFFSET 0x40 > +#define SUN4I_IRQ_MASK_REG_OFFSET 0x50 > +#define SUNIV_IRQ_ENABLE_REG_OFFSET 0x20 > +#define SUNIV_IRQ_MASK_REG_OFFSET 0x30 > + > +struct sunxi_irq_chip_data{ ^ a space here > + void __iomem *irq_base; > + struct irq_domain *irq_domain; > + u32 enable_req_offset; > + u32 mask_req_offset; s/req/reg/ ? > +}; > > -static void __iomem *sun4i_irq_base; > -static struct irq_domain *sun4i_irq_domain; > +static struct sunxi_irq_chip_data *irq_ic_data; This is a very welcome change, but you should do it in two patches: one to convert the existing code to that structure (with only the domain and base), and then a second patch to add the register offsets. (also the structure should be prefixed with sun4i, for consistency with the rest of the driver). > > static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs); > > @@ -43,7 +53,7 @@ static void sun4i_irq_ack(struct irq_data *irqd) > if (irq != 0) > return; /* Only IRQ 0 / the ENMI needs to be acked */ > > - writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)); > + writel(BIT(0), irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); > } > > static void sun4i_irq_mask(struct irq_data *irqd) > @@ -53,9 +63,9 @@ static void sun4i_irq_mask(struct irq_data *irqd) > int reg = irq / 32; > u32 val; > > - val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > + val = readl(irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > writel(val & ~(1 << irq_off), > - sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > + irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > } > > static void sun4i_irq_unmask(struct irq_data *irqd) > @@ -65,9 +75,9 @@ static void sun4i_irq_unmask(struct irq_data *irqd) > int reg = irq / 32; > u32 val; > > - val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > + val = readl(irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > writel(val | (1 << irq_off), > - sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > + irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); > } > > static struct irq_chip sun4i_irq_chip = { > @@ -95,42 +105,76 @@ static const struct irq_domain_ops sun4i_irq_ops = { > static int __init sun4i_of_init(struct device_node *node, > struct device_node *parent) > { > - sun4i_irq_base = of_iomap(node, 0); > - if (!sun4i_irq_base) > + irq_ic_data->irq_base = of_iomap(node, 0); > + if (!irq_ic_data->irq_base) > panic("%pOF: unable to map IC registers\n", > node); > > /* Disable all interrupts */ > - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(0)); > - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1)); > - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(0)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(1)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(2)); > > /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */ > - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0)); > - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1)); > - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(0)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(1)); > + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(2)); > > /* Clear all the pending interrupts */ > - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)); > - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1)); > - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2)); > + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); > + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(1)); > + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(2)); > > - /* Enable protection mode */ > - writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG); > + /* Enable protection mode (not available in suniv) */ > + if (of_device_is_compatible(node, "allwinner,sun4i-a10-ic")) > + writel(0x01, irq_ic_data->irq_base + SUN4I_IRQ_PROTECTION_REG); > > /* Configure the external interrupt source type */ > - writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG); > + writel(0x00, irq_ic_data->irq_base + SUN4I_IRQ_NMI_CTRL_REG); > > - sun4i_irq_domain = irq_domain_add_linear(node, 3 * 32, > + irq_ic_data->irq_domain = irq_domain_add_linear(node, 3 * 32, > &sun4i_irq_ops, NULL); > - if (!sun4i_irq_domain) > + if (!irq_ic_data->irq_domain) > panic("%pOF: unable to create IRQ domain\n", node); > > set_handle_irq(sun4i_handle_irq); > > return 0; > } > -IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_of_init); > + > +static int __init sun4i_ic_of_init(struct device_node *node, > + struct device_node *parent) > +{ > + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); > + if (!irq_ic_data) { > + pr_err("kzalloc failed!\n"); > + return -ENOMEM; > + } > + > + irq_ic_data->enable_req_offset = SUN4I_IRQ_ENABLE_REG_OFFSET; > + irq_ic_data->mask_req_offset = SUN4I_IRQ_MASK_REG_OFFSET; > + > + return sun4i_of_init(node, parent); > +} > + > +IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_ic_of_init); > + > +static int __init suniv_ic_of_init(struct device_node *node, > + struct device_node *parent) > +{ > + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); > + if (!irq_ic_data) { > + pr_err("kzalloc failed!\n"); > + return -ENOMEM; > + } > + > + irq_ic_data->enable_req_offset = SUNIV_IRQ_ENABLE_REG_OFFSET; > + irq_ic_data->mask_req_offset = SUNIV_IRQ_MASK_REG_OFFSET; > + > + return sun4i_of_init(node, parent); > +} > + > +IRQCHIP_DECLARE(allwinner_sunvi_ic, "allwinner,suniv-f1c100s-ic", suniv_ic_of_init); You can even split that addition to a new patch as well. Maxime
On 18/11/22 09:35, Maxime Ripard wrote: > Hi Mesih, > Hi! > On Wed, Nov 21, 2018 at 09:30:38PM +0300, Mesih Kilinc wrote: > > The new F-series SoCs (suniv) from Allwinner use an stripped version of > > the interrupt controller in A10/A13 > > > > Add support for it in irq-sun4i driver. > > > > Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> > > --- > > drivers/irqchip/irq-sun4i.c | 104 +++++++++++++++++++++++++++++++------------- > > 1 file changed, 74 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c > > index e3e5b91..7ca4a4d 100644 > > --- a/drivers/irqchip/irq-sun4i.c > > +++ b/drivers/irqchip/irq-sun4i.c > > @@ -28,11 +28,21 @@ > > #define SUN4I_IRQ_NMI_CTRL_REG 0x0c > > #define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) > > #define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) > > -#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) > > -#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x) > > +#define SUN4I_IRQ_ENABLE_REG(x) (irq_ic_data->enable_req_offset + 0x4 * x) > > +#define SUN4I_IRQ_MASK_REG(x) (irq_ic_data->mask_req_offset + 0x4 * x) > > You shouldn't have all the values you use passed as argument, so > irq_ic_data should be one of them here. > Could you elaborate it a little bit? > > +#define SUN4I_IRQ_ENABLE_REG_OFFSET 0x40 > > +#define SUN4I_IRQ_MASK_REG_OFFSET 0x50 > > +#define SUNIV_IRQ_ENABLE_REG_OFFSET 0x20 > > +#define SUNIV_IRQ_MASK_REG_OFFSET 0x30 > > + > > +struct sunxi_irq_chip_data{ > ^ a space here > > > + void __iomem *irq_base; > > + struct irq_domain *irq_domain; > > + u32 enable_req_offset; > > + u32 mask_req_offset; > > s/req/reg/ ? > Oops sorry ... > > + > > +static int __init suniv_ic_of_init(struct device_node *node, > > + struct device_node *parent) > > +{ > > + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); > > + if (!irq_ic_data) { > > + pr_err("kzalloc failed!\n"); > > + return -ENOMEM; > > + } > > + > > + irq_ic_data->enable_req_offset = SUNIV_IRQ_ENABLE_REG_OFFSET; > > + irq_ic_data->mask_req_offset = SUNIV_IRQ_MASK_REG_OFFSET; > > + > > + return sun4i_of_init(node, parent); > > +} > > + > > +IRQCHIP_DECLARE(allwinner_sunvi_ic, "allwinner,suniv-f1c100s-ic", suniv_ic_of_init); > > You can even split that addition to a new patch as well. OK. I will do 3 patches. First one will add a struct that holds only base and domain. Second one will add register offsets to that struct. Third one will add f1c100s support. Is that ok? Mesih
On Thu, Nov 22, 2018 at 06:02:00PM +0300, Mesih Kilinc wrote: > > > diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c > > > index e3e5b91..7ca4a4d 100644 > > > --- a/drivers/irqchip/irq-sun4i.c > > > +++ b/drivers/irqchip/irq-sun4i.c > > > @@ -28,11 +28,21 @@ > > > #define SUN4I_IRQ_NMI_CTRL_REG 0x0c > > > #define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) > > > #define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) > > > -#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) > > > -#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x) > > > +#define SUN4I_IRQ_ENABLE_REG(x) (irq_ic_data->enable_req_offset + 0x4 * x) > > > +#define SUN4I_IRQ_MASK_REG(x) (irq_ic_data->mask_req_offset + 0x4 * x) > > > > You shouldn't have all the values you use passed as argument, so > > irq_ic_data should be one of them here. > > > > Could you elaborate it a little bit? You should change your macro to something like: SUN4I_IRQ_ENABLE_REG(data, x) ((data)->enable_req_offset + 0x4 * x) That way, you are transparent about the parameters that the macro expects, and don't rely on some unwritten rule about the variable name. > > > + > > > +static int __init suniv_ic_of_init(struct device_node *node, > > > + struct device_node *parent) > > > +{ > > > + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); > > > + if (!irq_ic_data) { > > > + pr_err("kzalloc failed!\n"); > > > + return -ENOMEM; > > > + } > > > + > > > + irq_ic_data->enable_req_offset = SUNIV_IRQ_ENABLE_REG_OFFSET; > > > + irq_ic_data->mask_req_offset = SUNIV_IRQ_MASK_REG_OFFSET; > > > + > > > + return sun4i_of_init(node, parent); > > > +} > > > + > > > +IRQCHIP_DECLARE(allwinner_sunvi_ic, "allwinner,suniv-f1c100s-ic", suniv_ic_of_init); > > > > You can even split that addition to a new patch as well. > > OK. I will do 3 patches. First one will add a struct that holds only > base and domain. Second one will add register offsets to that struct. > Third one will add f1c100s support. Is that ok? Sounds perfect :) Thanks! Maxime
diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c index e3e5b91..7ca4a4d 100644 --- a/drivers/irqchip/irq-sun4i.c +++ b/drivers/irqchip/irq-sun4i.c @@ -28,11 +28,21 @@ #define SUN4I_IRQ_NMI_CTRL_REG 0x0c #define SUN4I_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) #define SUN4I_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) -#define SUN4I_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) -#define SUN4I_IRQ_MASK_REG(x) (0x50 + 0x4 * x) +#define SUN4I_IRQ_ENABLE_REG(x) (irq_ic_data->enable_req_offset + 0x4 * x) +#define SUN4I_IRQ_MASK_REG(x) (irq_ic_data->mask_req_offset + 0x4 * x) +#define SUN4I_IRQ_ENABLE_REG_OFFSET 0x40 +#define SUN4I_IRQ_MASK_REG_OFFSET 0x50 +#define SUNIV_IRQ_ENABLE_REG_OFFSET 0x20 +#define SUNIV_IRQ_MASK_REG_OFFSET 0x30 + +struct sunxi_irq_chip_data{ + void __iomem *irq_base; + struct irq_domain *irq_domain; + u32 enable_req_offset; + u32 mask_req_offset; +}; -static void __iomem *sun4i_irq_base; -static struct irq_domain *sun4i_irq_domain; +static struct sunxi_irq_chip_data *irq_ic_data; static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs); @@ -43,7 +53,7 @@ static void sun4i_irq_ack(struct irq_data *irqd) if (irq != 0) return; /* Only IRQ 0 / the ENMI needs to be acked */ - writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)); + writel(BIT(0), irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); } static void sun4i_irq_mask(struct irq_data *irqd) @@ -53,9 +63,9 @@ static void sun4i_irq_mask(struct irq_data *irqd) int reg = irq / 32; u32 val; - val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + val = readl(irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); writel(val & ~(1 << irq_off), - sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); } static void sun4i_irq_unmask(struct irq_data *irqd) @@ -65,9 +75,9 @@ static void sun4i_irq_unmask(struct irq_data *irqd) int reg = irq / 32; u32 val; - val = readl(sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + val = readl(irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); writel(val | (1 << irq_off), - sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg)); + irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(reg)); } static struct irq_chip sun4i_irq_chip = { @@ -95,42 +105,76 @@ static const struct irq_domain_ops sun4i_irq_ops = { static int __init sun4i_of_init(struct device_node *node, struct device_node *parent) { - sun4i_irq_base = of_iomap(node, 0); - if (!sun4i_irq_base) + irq_ic_data->irq_base = of_iomap(node, 0); + if (!irq_ic_data->irq_base) panic("%pOF: unable to map IC registers\n", node); /* Disable all interrupts */ - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(0)); - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1)); - writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(0)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(1)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_ENABLE_REG(2)); /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */ - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0)); - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1)); - writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(0)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(1)); + writel(0, irq_ic_data->irq_base + SUN4I_IRQ_MASK_REG(2)); /* Clear all the pending interrupts */ - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)); - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(1)); - writel(0xffffffff, sun4i_irq_base + SUN4I_IRQ_PENDING_REG(2)); + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)); + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(1)); + writel(0xffffffff, irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(2)); - /* Enable protection mode */ - writel(0x01, sun4i_irq_base + SUN4I_IRQ_PROTECTION_REG); + /* Enable protection mode (not available in suniv) */ + if (of_device_is_compatible(node, "allwinner,sun4i-a10-ic")) + writel(0x01, irq_ic_data->irq_base + SUN4I_IRQ_PROTECTION_REG); /* Configure the external interrupt source type */ - writel(0x00, sun4i_irq_base + SUN4I_IRQ_NMI_CTRL_REG); + writel(0x00, irq_ic_data->irq_base + SUN4I_IRQ_NMI_CTRL_REG); - sun4i_irq_domain = irq_domain_add_linear(node, 3 * 32, + irq_ic_data->irq_domain = irq_domain_add_linear(node, 3 * 32, &sun4i_irq_ops, NULL); - if (!sun4i_irq_domain) + if (!irq_ic_data->irq_domain) panic("%pOF: unable to create IRQ domain\n", node); set_handle_irq(sun4i_handle_irq); return 0; } -IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_of_init); + +static int __init sun4i_ic_of_init(struct device_node *node, + struct device_node *parent) +{ + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); + if (!irq_ic_data) { + pr_err("kzalloc failed!\n"); + return -ENOMEM; + } + + irq_ic_data->enable_req_offset = SUN4I_IRQ_ENABLE_REG_OFFSET; + irq_ic_data->mask_req_offset = SUN4I_IRQ_MASK_REG_OFFSET; + + return sun4i_of_init(node, parent); +} + +IRQCHIP_DECLARE(allwinner_sun4i_ic, "allwinner,sun4i-a10-ic", sun4i_ic_of_init); + +static int __init suniv_ic_of_init(struct device_node *node, + struct device_node *parent) +{ + irq_ic_data = kzalloc(sizeof(struct sunxi_irq_chip_data), GFP_KERNEL); + if (!irq_ic_data) { + pr_err("kzalloc failed!\n"); + return -ENOMEM; + } + + irq_ic_data->enable_req_offset = SUNIV_IRQ_ENABLE_REG_OFFSET; + irq_ic_data->mask_req_offset = SUNIV_IRQ_MASK_REG_OFFSET; + + return sun4i_of_init(node, parent); +} + +IRQCHIP_DECLARE(allwinner_sunvi_ic, "allwinner,suniv-f1c100s-ic", suniv_ic_of_init); static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs) { @@ -146,13 +190,13 @@ static void __exception_irq_entry sun4i_handle_irq(struct pt_regs *regs) * the extra check in the common case of 1 hapening after having * read the vector-reg once. */ - hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; + hwirq = readl(irq_ic_data->irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; if (hwirq == 0 && - !(readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)) & BIT(0))) + !(readl(irq_ic_data->irq_base + SUN4I_IRQ_PENDING_REG(0)) & BIT(0))) return; do { - handle_domain_irq(sun4i_irq_domain, hwirq, regs); - hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; + handle_domain_irq(irq_ic_data->irq_domain, hwirq, regs); + hwirq = readl(irq_ic_data->irq_base + SUN4I_IRQ_VECTOR_REG) >> 2; } while (hwirq != 0); }
The new F-series SoCs (suniv) from Allwinner use an stripped version of the interrupt controller in A10/A13 Add support for it in irq-sun4i driver. Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com> --- drivers/irqchip/irq-sun4i.c | 104 +++++++++++++++++++++++++++++++------------- 1 file changed, 74 insertions(+), 30 deletions(-)