diff mbox series

[v3,2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings

Message ID 1541697251-20392-3-git-send-email-soares@synopsys.com
State New
Headers show
Series Add driver for Synopsys DesignWare I3C master IP | expand

Commit Message

Vitor Soares Nov. 8, 2018, 5:14 p.m. UTC
Document Synopsys DesignWare I3C master module

Signed-off-by: Vitor soares <soares@synopsys.com>
---
Changes in v3:
- Remove dummy characters

Changes in v2:
- Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
- Add controller version on compatible string

 .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt

Comments

Boris Brezillon Nov. 12, 2018, 9:17 a.m. UTC | #1
On Thu,  8 Nov 2018 17:14:10 +0000
Vitor soares <vitor.soares@synopsys.com> wrote:

> Document Synopsys DesignWare I3C master module
> 
> Signed-off-by: Vitor soares <soares@synopsys.com>
> ---
> Changes in v3:
> - Remove dummy characters
> 
> Changes in v2:
> - Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
> - Add controller version on compatible string
> 
>  .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> 
> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> new file mode 100644
> index 0000000..b930c09
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> @@ -0,0 +1,42 @@
> +Bindings for Synopsys DesignWare I3C master block
> +=================================================
> +
> +Required properties:
> +--------------------
> +- compatible: shall be "snps,dw-i3c-master-1.00a"
> +- clocks: shall reference the core_clk

Are you sure this IP only requires only one clock? If you're unsure,
you'd better have a clock-names prop.

> +- interrupts: the interrupt line connected to this I3C master
> +- reg: Offset and length of I3C master registers
> +
> +Mandatory properties defined by the generic binding (see
> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> +
> +- #address-cells: shall be set to 3
> +- #size-cells: shall be set to 0
> +
> +Optional properties defined by the generic binding (see
> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> +
> +- i2c-scl-hz
> +- i3c-scl-hz
> +
> +I3C device connected on the bus follow the generic description (see
> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
> +
> +Example:
> +
> +	i3c-master@2000 {
> +		compatible = "snps,dw-i3c-master-1.00a";
> +		#address-cells = <3>;
> +		#size-cells = <0>;
> +		reg = <0x02000 0x1000>;
> +		interrupts = <0>;
> +		clocks = <&i3cclk>;
> +
> +		eeprom@57{
> +			compatible = "atmel,24c01";
> +			reg = < 0x57 0x0 0x10>;

			       ^ remove this white space.

> +			pagesize = <0x8>;
> +		};
> +	};
> +
Rob Herring (Arm) Nov. 13, 2018, 2:09 a.m. UTC | #2
On Thu, Nov 08, 2018 at 05:14:10PM +0000, Vitor soares wrote:
> Document Synopsys DesignWare I3C master module
> 
> Signed-off-by: Vitor soares <soares@synopsys.com>

Please make your author and S-o-b emails match.

> ---
> Changes in v3:
> - Remove dummy characters
> 
> Changes in v2:
> - Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
> - Add controller version on compatible string
> 
>  .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>
Vitor Soares Nov. 13, 2018, 11:11 a.m. UTC | #3
Hi Boris,

On 12/11/18 09:17, Boris Brezillon wrote:
> On Thu,  8 Nov 2018 17:14:10 +0000
> Vitor soares <vitor.soares@synopsys.com> wrote:
>
>> Document Synopsys DesignWare I3C master module
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
>> ---
>> Changes in v3:
>> - Remove dummy characters
>>
>> Changes in v2:
>> - Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
>> - Add controller version on compatible string
>>
>>   .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
>>   1 file changed, 42 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> new file mode 100644
>> index 0000000..b930c09
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>> @@ -0,0 +1,42 @@
>> +Bindings for Synopsys DesignWare I3C master block
>> +=================================================
>> +
>> +Required properties:
>> +--------------------
>> +- compatible: shall be "snps,dw-i3c-master-1.00a"
>> +- clocks: shall reference the core_clk
> Are you sure this IP only requires only one clock? If you're unsure,
> you'd better have a clock-names prop.
Yes, the controller only has this clock dependency to configure the SCL.
>
>> +- interrupts: the interrupt line connected to this I3C master
>> +- reg: Offset and length of I3C master registers
>> +
>> +Mandatory properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- #address-cells: shall be set to 3
>> +- #size-cells: shall be set to 0
>> +
>> +Optional properties defined by the generic binding (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
>> +
>> +- i2c-scl-hz
>> +- i3c-scl-hz
>> +
>> +I3C device connected on the bus follow the generic description (see
>> +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
>> +
>> +Example:
>> +
>> +	i3c-master@2000 {
>> +		compatible = "snps,dw-i3c-master-1.00a";
>> +		#address-cells = <3>;
>> +		#size-cells = <0>;
>> +		reg = <0x02000 0x1000>;
>> +		interrupts = <0>;
>> +		clocks = <&i3cclk>;
>> +
>> +		eeprom@57{
>> +			compatible = "atmel,24c01";
>> +			reg = < 0x57 0x0 0x10>;
> 			       ^ remove this white space.
>
>> +			pagesize = <0x8>;
>> +		};
>> +	};
>> +

Best regards,

Vitor Soares
Vitor Soares Nov. 13, 2018, 11:20 a.m. UTC | #4
Hi Rob,

On 13/11/18 02:09, Rob Herring wrote:
> On Thu, Nov 08, 2018 at 05:14:10PM +0000, Vitor soares wrote:
>> Document Synopsys DesignWare I3C master module
>>
>> Signed-off-by: Vitor soares <soares@synopsys.com>
> Please make your author and S-o-b emails match.

This is an alias and both email will work. Anyway I agree that should be 
the same that appear in the mailing list and I will change it.

>> ---
>> Changes in v3:
>> - Remove dummy characters
>>
>> Changes in v2:
>> - Address the changes in Documentation/devicetree/bindings/i3c/i3c.txt
>> - Add controller version on compatible string
>>
>>   .../devicetree/bindings/i3c/snps,dw-i3c-master.txt | 42 ++++++++++++++++++++++
>>   1 file changed, 42 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
> Otherwise,
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks for review.


Best regards,

Vitor Soares
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
new file mode 100644
index 0000000..b930c09
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
@@ -0,0 +1,42 @@ 
+Bindings for Synopsys DesignWare I3C master block
+=================================================
+
+Required properties:
+--------------------
+- compatible: shall be "snps,dw-i3c-master-1.00a"
+- clocks: shall reference the core_clk
+- interrupts: the interrupt line connected to this I3C master
+- reg: Offset and length of I3C master registers
+
+Mandatory properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- #address-cells: shall be set to 3
+- #size-cells: shall be set to 0
+
+Optional properties defined by the generic binding (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details):
+
+- i2c-scl-hz
+- i3c-scl-hz
+
+I3C device connected on the bus follow the generic description (see
+Documentation/devicetree/bindings/i3c/i3c.txt for more details).
+
+Example:
+
+	i3c-master@2000 {
+		compatible = "snps,dw-i3c-master-1.00a";
+		#address-cells = <3>;
+		#size-cells = <0>;
+		reg = <0x02000 0x1000>;
+		interrupts = <0>;
+		clocks = <&i3cclk>;
+
+		eeprom@57{
+			compatible = "atmel,24c01";
+			reg = < 0x57 0x0 0x10>;
+			pagesize = <0x8>;
+		};
+	};
+