diff mbox series

[v8,07/12] dt-bindings: mfd: Add a document for PECI client MFD

Message ID 20180918215124.14003-8-jae.hyun.yoo@linux.intel.com
State Not Applicable, archived
Headers show
Series PECI device driver introduction | expand

Commit Message

Jae Hyun Yoo Sept. 18, 2018, 9:51 p.m. UTC
This commit adds a dt-bindings document for PECI client MFD.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
 .../bindings/mfd/intel-peci-client.txt        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt

Comments

Rob Herring Sept. 27, 2018, 3:15 p.m. UTC | #1
On Tue, 18 Sep 2018 14:51:19 -0700, Jae Hyun Yoo wrote:
> This commit adds a dt-bindings document for PECI client MFD.
> 
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: James Feist <james.feist@linux.intel.com>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
>  .../bindings/mfd/intel-peci-client.txt        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Jae Hyun Yoo Sept. 27, 2018, 4:28 p.m. UTC | #2
On 9/27/2018 8:15 AM, Rob Herring wrote:
> On Tue, 18 Sep 2018 14:51:19 -0700, Jae Hyun Yoo wrote:
>> This commit adds a dt-bindings document for PECI client MFD.
>>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: James Feist <james.feist@linux.intel.com>
>> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
>> Cc: Joel Stanley <joel@jms.id.au>
>> Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> ---
>>   .../bindings/mfd/intel-peci-client.txt        | 34 +++++++++++++++++++
>>   1 file changed, 34 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
>>
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 

Thanks for the review, Rob!
Lee Jones Oct. 24, 2018, 7:25 a.m. UTC | #3
On Tue, 18 Sep 2018, Jae Hyun Yoo wrote:

> This commit adds a dt-bindings document for PECI client MFD.
> 
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: James Feist <james.feist@linux.intel.com>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> ---
>  .../bindings/mfd/intel-peci-client.txt        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/intel-peci-client.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
> new file mode 100644
> index 000000000000..cb341e363add
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
> @@ -0,0 +1,34 @@
> +* Intel PECI client bindings
> +
> +PECI (Platform Environment Control Interface) is a one-wire bus interface that
> +provides a communication channel from PECI clients in Intel processors and
> +chipset components to external monitoring or control devices. PECI is designed
> +to support the following sideband functions:
> +
> +- Processor and DRAM thermal management
> +- Platform Manageability
> +- Processor Interface Tuning and Diagnostics
> +- Failure Analysis
> +
> +Required properties:
> +- compatible : Should be "intel,peci-client".
> +- reg        : Should contain address of a client CPU. Address range of CPU
> +	       clients starts from 0x30 based on PECI specification.

Nit: "start"

Would be better worded:

"According to the PECI specification client addresses start from 0x30."

> +Example:
> +	peci-bus@0 {
> +		compatible = "vendor,soc-peci";
> +		reg = <0x0 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		peci-client@30 {
> +			compatible = "intel,peci-client";
> +			reg = <0x30>;
> +		};
> +
> +		peci-client@31 {
> +			compatible = "intel,peci-client";
> +			reg = <0x31>;
> +		};
> +	};
Jae Hyun Yoo Oct. 24, 2018, 4:39 p.m. UTC | #4
Hi Lee,

On 10/24/2018 12:25 AM, Lee Jones wrote:
> On Tue, 18 Sep 2018, Jae Hyun Yoo wrote:
> 
>> +Required properties:
>> +- compatible : Should be "intel,peci-client".
>> +- reg        : Should contain address of a client CPU. Address range of CPU
>> +	       clients starts from 0x30 based on PECI specification.
> 
> Nit: "start"
> 
> Would be better worded:
> 
> "According to the PECI specification client addresses start from 0x30."
> 

Yes, that would be better. Will fix it like you suggested.

Thanks for the review!

Jae
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/intel-peci-client.txt b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
new file mode 100644
index 000000000000..cb341e363add
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel-peci-client.txt
@@ -0,0 +1,34 @@ 
+* Intel PECI client bindings
+
+PECI (Platform Environment Control Interface) is a one-wire bus interface that
+provides a communication channel from PECI clients in Intel processors and
+chipset components to external monitoring or control devices. PECI is designed
+to support the following sideband functions:
+
+- Processor and DRAM thermal management
+- Platform Manageability
+- Processor Interface Tuning and Diagnostics
+- Failure Analysis
+
+Required properties:
+- compatible : Should be "intel,peci-client".
+- reg        : Should contain address of a client CPU. Address range of CPU
+	       clients starts from 0x30 based on PECI specification.
+
+Example:
+	peci-bus@0 {
+		compatible = "vendor,soc-peci";
+		reg = <0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		peci-client@30 {
+			compatible = "intel,peci-client";
+			reg = <0x30>;
+		};
+
+		peci-client@31 {
+			compatible = "intel,peci-client";
+			reg = <0x31>;
+		};
+	};