Message ID | 3a1a95a4832af33dcd1842b0298d257bbcf1f5ab.1539036280.git.gustavo@embeddedor.com |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [1/2] dt-bindings: phy: Update SERDES_MAX to be SERDES_MAX + 1 | expand |
Hi Gustavo, On Tue, Oct 09, 2018 at 12:21:36AM +0200, Gustavo A. R. Silva wrote: > SERDES_MAX is a valid value to index ctrl->phys in > drivers/phy/mscc/phy-ocelot-serdes.c. But, currently, > there is an out-of-bounds bug in the mentioned driver > when reading from ctrl->phys, because the size of > array ctrl->phys is SERDES_MAX. > > Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1. > > Notice that this is the first part of the solution to > the out-of-bounds bug mentioned above. Although this > change is not dependent on any other one. > Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Thanks, Quentin
Hi, On 10/9/18 9:27 AM, Quentin Schulz wrote: > Hi Gustavo, > > On Tue, Oct 09, 2018 at 12:21:36AM +0200, Gustavo A. R. Silva wrote: >> SERDES_MAX is a valid value to index ctrl->phys in >> drivers/phy/mscc/phy-ocelot-serdes.c. But, currently, >> there is an out-of-bounds bug in the mentioned driver >> when reading from ctrl->phys, because the size of >> array ctrl->phys is SERDES_MAX. >> >> Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1. >> >> Notice that this is the first part of the solution to >> the out-of-bounds bug mentioned above. Although this >> change is not dependent on any other one. >> > > Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> > Friendly ping. Who can you take this? Thanks! -- Gustavo
On Tue, Oct 16, 2018 at 10:44:52AM +0200, Gustavo A. R. Silva wrote: > Hi, > > On 10/9/18 9:27 AM, Quentin Schulz wrote: > > Hi Gustavo, > > > > On Tue, Oct 09, 2018 at 12:21:36AM +0200, Gustavo A. R. Silva wrote: > >> SERDES_MAX is a valid value to index ctrl->phys in > >> drivers/phy/mscc/phy-ocelot-serdes.c. But, currently, > >> there is an out-of-bounds bug in the mentioned driver > >> when reading from ctrl->phys, because the size of > >> array ctrl->phys is SERDES_MAX. > >> > >> Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1. > >> > >> Notice that this is the first part of the solution to > >> the out-of-bounds bug mentioned above. Although this > >> change is not dependent on any other one. > >> > > > > Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> > > > > Friendly ping. Who can you take this? Applied. No need (nor benefit) to ping me. You can check the status of DT patches on patchwork[1]. If it is there and in the "New" state, it is in my queue. Rob [1] https://patchwork.ozlabs.org/project/devicetree-bindings/list/
On 10/17/18 5:09 PM, Rob Herring wrote: >> >> Friendly ping. Who can you take this? > > Applied. No need (nor benefit) to ping me. You can check the status of > DT patches on patchwork[1]. If it is there and in the "New" state, it is > in my queue. > OK. I've got it. I just didn't know who usually takes these dt-bindings patches. > Rob > > [1] https://patchwork.ozlabs.org/project/devicetree-bindings/list/ > Thanks, Rob. -- Gustavo
On Wed, Oct 17, 2018 at 10:09:31AM -0500, Rob Herring wrote: > On Tue, Oct 16, 2018 at 10:44:52AM +0200, Gustavo A. R. Silva wrote: > > Hi, > > > > On 10/9/18 9:27 AM, Quentin Schulz wrote: > > > Hi Gustavo, > > > > > > On Tue, Oct 09, 2018 at 12:21:36AM +0200, Gustavo A. R. Silva wrote: > > >> SERDES_MAX is a valid value to index ctrl->phys in > > >> drivers/phy/mscc/phy-ocelot-serdes.c. But, currently, > > >> there is an out-of-bounds bug in the mentioned driver > > >> when reading from ctrl->phys, because the size of > > >> array ctrl->phys is SERDES_MAX. > > >> > > >> Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1. > > >> > > >> Notice that this is the first part of the solution to > > >> the out-of-bounds bug mentioned above. Although this > > >> change is not dependent on any other one. > > >> > > > > > > Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> > > > > > > > Friendly ping. Who can you take this? > > Applied. No need (nor benefit) to ping me. You can check the status of > DT patches on patchwork[1]. If it is there and in the "New" state, it is > in my queue. Actually, this doesn't apply to my tree as the file doesn't exist. It needs to go thru the phy tree. You didn't Cc the maintainer nor list, so resend. Acked-by: Rob Herring <robh@kernel.org> Rob
On 10/17/18 5:23 PM, Rob Herring wrote: >>> Friendly ping. Who can you take this? >> >> Applied. No need (nor benefit) to ping me. You can check the status of >> DT patches on patchwork[1]. If it is there and in the "New" state, it is >> in my queue. > > Actually, this doesn't apply to my tree as the file doesn't exist. It > needs to go thru the phy tree. You didn't Cc the maintainer nor list, so > resend. > This is what I get when I run the get_maintainer script: linux$ scripts/get_maintainer.pl --nokeywords --nogit --nogit-fallback include/dt-bindings/phy/phy-ocelot-serdes.h Rob Herring <robh+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Mark Rutland <mark.rutland@arm.com> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) linux-kernel@vger.kernel.org (open list) But I'll send it to the phy guys as you suggest. > Acked-by: Rob Herring <robh@kernel.org> > Thanks -- Gustavo
diff --git a/include/dt-bindings/phy/phy-ocelot-serdes.h b/include/dt-bindings/phy/phy-ocelot-serdes.h index bd28f21..fe70ada 100644 --- a/include/dt-bindings/phy/phy-ocelot-serdes.h +++ b/include/dt-bindings/phy/phy-ocelot-serdes.h @@ -7,6 +7,6 @@ #define SERDES1G_MAX SERDES1G(5) #define SERDES6G(x) (SERDES1G_MAX + 1 + (x)) #define SERDES6G_MAX SERDES6G(2) -#define SERDES_MAX SERDES6G_MAX +#define SERDES_MAX (SERDES6G_MAX + 1) #endif
SERDES_MAX is a valid value to index ctrl->phys in drivers/phy/mscc/phy-ocelot-serdes.c. But, currently, there is an out-of-bounds bug in the mentioned driver when reading from ctrl->phys, because the size of array ctrl->phys is SERDES_MAX. Partially fix this by updating SERDES_MAX to be SERDES6G_MAX + 1. Notice that this is the first part of the solution to the out-of-bounds bug mentioned above. Although this change is not dependent on any other one. Suggested-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> --- include/dt-bindings/phy/phy-ocelot-serdes.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)