| Message ID | 20180831005852.156465-1-swboyd@chromium.org |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: qcom: spmi-mpp: Fix drive strength setting | expand |
On Thu 30 Aug 17:58 PDT 2018, Stephen Boyd wrote: > It looks like we parse the drive strength setting here, but never > actually write it into the hardware to update it. Parse the setting and > then write it at the end of the pinconf setting function so that it > actually sticks in the hardware. > > Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Doug Anderson <dianders@chromium.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c > index 6556dbeae65e..1793a4d05e15 100644 > --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c > +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c > @@ -455,7 +455,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, > pad->dtest = arg; > break; > case PIN_CONFIG_DRIVE_STRENGTH: > - arg = pad->drive_strength; > + pad->drive_strength = arg; > break; > case PMIC_MPP_CONF_AMUX_ROUTE: > if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4) > @@ -502,6 +502,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, > if (ret < 0) > return ret; > > + ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength); > + if (ret < 0) > + return ret; > + > val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT; > > return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val); > -- > Sent by a computer through tubes >
On Fri, Aug 31, 2018 at 2:58 AM Stephen Boyd <swboyd@chromium.org> wrote: > It looks like we parse the drive strength setting here, but never > actually write it into the hardware to update it. Parse the setting and > then write it at the end of the pinconf setting function so that it > actually sticks in the hardware. > > Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Doug Anderson <dianders@chromium.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> Patch applied with Bjorn's ACK. Yours, Linus Walleij
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 6556dbeae65e..1793a4d05e15 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -455,7 +455,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, pad->dtest = arg; break; case PIN_CONFIG_DRIVE_STRENGTH: - arg = pad->drive_strength; + pad->drive_strength = arg; break; case PMIC_MPP_CONF_AMUX_ROUTE: if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4) @@ -502,6 +502,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, if (ret < 0) return ret; + ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength); + if (ret < 0) + return ret; + val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT; return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)