Message ID | 20180717042953.23648-1-sam.voss@gmail.com |
---|---|
State | Changes Requested |
Headers | show |
Series | rust: Modify Rust to be usable as host-tool only | expand |
Hi! > From: Sam Voss <sam.voss@gmail.com> > > Modify host-rust virtual package to default to host-rust-bin when no > other selection has been made, as long as the host supports rust. This > allows host only tools to still use rust when the target architecture > does not support it. > > Add target-specific variable which is used to differentiate host and > target arch requirements (BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS). > > A target package shall depend on this variable where a host package will > use the previously defined BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS. The new > "target" version is selectable for the same set of architectures as > before, but now depends on the host variant. > > Signed-off-by: Sam Voss <sam.voss@gmail.com> IIUC, the goal of this patch is to be able to build host packages which need rust, so host-rust-bin is set as default to avoid errors on empty variables and only the compiler and the host standard library are installed (not the target standard library). Only x86_64/x86 support is required, right? I find it confusing that BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS are quite similar and that in the end BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is only used to install the target standard library. Is that meant to cover the case where the host and the target are the same (x86_64) or the librsvg-related issue? Would this be solved by introducing a virtual package for the target standard library as previously discussed [1]? [1] http://patchwork.ozlabs.org/comment/1830134/ Regards, -- ELB
Eric, On Tue, Jul 17, 2018 at 6:18 AM, Eric Le Bihan <eric.le.bihan.dev@free.fr> wrote: > Hi! > >> From: Sam Voss <sam.voss@gmail.com> >> >> Modify host-rust virtual package to default to host-rust-bin when no >> other selection has been made, as long as the host supports rust. This >> allows host only tools to still use rust when the target architecture >> does not support it. >> >> Add target-specific variable which is used to differentiate host and >> target arch requirements (BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS). >> >> A target package shall depend on this variable where a host package will >> use the previously defined BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS. The new >> "target" version is selectable for the same set of architectures as >> before, but now depends on the host variant. >> >> Signed-off-by: Sam Voss <sam.voss@gmail.com> > > IIUC, the goal of this patch is to be able to build host packages which need > rust, so host-rust-bin is set as default to avoid errors on empty variables > and only the compiler and the host standard library are installed (not the > target standard library). Only x86_64/x86 support is required, right? That is correct. This boils down to being able to build a host tool on supported platforms when the target isn't. > > I find it confusing that BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and > BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS are quite similar and that in > the end BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is only used to install > the target standard library. Is that meant to cover the case where the host > and the target are the same (x86_64) or the librsvg-related issue? The target was the librsvg build issues, I'm not sure it does anything special for the target-same builds as it'll just fall into the same scenario as the previous itteration (nothing will be gated off). > > Would this be solved by introducing a virtual package for the target > standard library as previously discussed [1]? I actually missed this conversation, and on paper I like the virtual package but I think it is a lot more work (which is OK, but it might be worth iterating to that point). Thanks, Sam
Hello Sam, Thanks for taking the lead on this! On Mon, 16 Jul 2018 23:29:53 -0500, sam.voss@gmail.com wrote: > From: Sam Voss <sam.voss@gmail.com> > > Modify host-rust virtual package to default to host-rust-bin when no > other selection has been made, as long as the host supports rust. This > allows host only tools to still use rust when the target architecture > does not support it. > > Add target-specific variable which is used to differentiate host and > target arch requirements (BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS). > > A target package shall depend on this variable where a host package will > use the previously defined BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS. The new > "target" version is selectable for the same set of architectures as > before, but now depends on the host variant. > > Signed-off-by: Sam Voss <sam.voss@gmail.com> I finally took a bit of time to look into this. Basically today, when we build host-rustc, we get: - A Rust compiler capable of compiling code for the host machine, and cross-compiling code for the target. - A Rust standard library for the host machine - A Rust standard library for the target machine However, this is restricted to Buildroot configurations where the target architecture is supported by Rust. But there are some host packages that we would like to build and run on the host (usually a x86 or x86-64 machine), and for these the restriction that host-rustc is only available when the target architecture is supported by Rust is too restrictive. So basically, we would like: - host-rustc to continue to install a Rust compiler that does native+cross, the host standard library and target standard library when the target architecture is supported by Rust. - host-rustc to install a Rust compiler that does native build, and the host standard library, when the target architecture is NOT supported by Rust. So the host-rustc package would have a different behavior depending on whether the target architecture is supported by Rust or not. > Note: this has been tested on x86_64 host compiling to: > > - x86_64 qemu target (building package to be upstreamed shortly) > - mips64el (based on librsvg build failures seen at > http://autobuild.buildroot.net/results/f33/f335ed517b402c094ed3b10a3da4cdc23620dbd6/defconfig) > this target was only tested to compile, with no runtime tests. > > package/rust-bin/rust-bin.mk | 5 ++++- > package/rust/rust.mk | 1 + > package/rustc/Config.in.host | 21 ++++++++++++++++++--- > package/rustc/rustc.mk | 2 ++ > 4 files changed, 25 insertions(+), 4 deletions(-) > > diff --git a/package/rust-bin/rust-bin.mk b/package/rust-bin/rust-bin.mk > index e10dbcebd0..c426da8d15 100644 > --- a/package/rust-bin/rust-bin.mk > +++ b/package/rust-bin/rust-bin.mk > @@ -15,7 +15,10 @@ HOST_RUST_BIN_SOURCE = rustc-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME).tar.xz > > HOST_RUST_BIN_EXTRA_DOWNLOADS = \ > rust-std-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME).tar.xz \ The ending backslash should be removed here, I guess it causes a check-package warning. > - rust-std-$(RUST_BIN_VERSION)-$(RUSTC_TARGET_NAME).tar.xz > + > +ifeq ($(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS),y) > +HOST_RUST_BIN_EXTRA_DOWNLOADS += rust-std-$(RUST_BIN_VERSION)-$(RUSTC_TARGET_NAME).tar.xz > +endif > > HOST_RUST_BIN_LIBSTD_HOST_PREFIX = rust-std-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME)/rust-std-$(RUSTC_HOST_NAME) > > diff --git a/package/rust/rust.mk b/package/rust/rust.mk > index af5c366495..c11dbb23b0 100644 > --- a/package/rust/rust.mk > +++ b/package/rust/rust.mk > @@ -19,6 +19,7 @@ HOST_RUST_DEPENDENCIES = \ > host-python \ > $(BR2_CMAKE_HOST_DEPENDENCY) > > + Spurious change. > ifeq ($(BR2_PACKAGE_JEMALLOC),y) > HOST_RUST_DEPENDENCIES += jemalloc > HOST_RUST_JEMALLOC_ENABLED = true > diff --git a/package/rustc/Config.in.host b/package/rustc/Config.in.host > index 2ae8f89d3f..d7f0efcd3f 100644 > --- a/package/rustc/Config.in.host > +++ b/package/rustc/Config.in.host > @@ -14,6 +14,19 @@ config BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS > depends on BR2_TOOLCHAIN_USES_GLIBC > depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" I think you need to remove all the architecture dependencies here: host-rust is always available, as long as the host architecture is x86-64 or x86. The glibc dependency should also be removed, as we don't have any way of expressing a "we depend on a host machine with glibc" dependency today. > +config BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS > + bool > + default y if BR2_i386 > + default y if BR2_x86_64 > + default y if BR2_aarch64 > + default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 \ > + && !(BR2_ARM_CPU_ARMV7A && BR2_ARM_EABI) > + default y if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le > + default y if (BR2_mips || BR2_mipsel) && !BR2_MIPS_CPU_MIPS32R6 > + default y if (BR2_mips64 || BR2_mips64el) && !BR2_MIPS_CPU_MIPS64R6 \ > + && BR2_MIPS_NABI64 The glibc dependency should be re-added here. > + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS > + > config BR2_PACKAGE_HOST_RUSTC_ARCH > string > default "armv7" if BR2_ARM_CPU_ARMV7A > @@ -66,9 +79,11 @@ config BR2_PACKAGE_HOST_RUST_BIN > > endchoice > > +endif > + > config BR2_PACKAGE_PROVIDES_HOST_RUSTC > string > default "host-rust" if BR2_PACKAGE_HOST_RUST > - default "host-rust-bin" if BR2_PACKAGE_HOST_RUST_BIN > - > -endif > + # Default to host-rust-bin as long as host arch supports it > + default "host-rust-bin" if !BR2_PACKAGE_HOST_RUST > + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS However, even with those changes, if I do: $ cat > .config <<EOF BR2_nios2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-nios2-full-2018.05.tar.bz2" BR2_TOOLCHAIN_EXTERNAL_GCC_6=y BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_16=y BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y # BR2_TOOLCHAIN_EXTERNAL_HAS_SSP is not set BR2_TOOLCHAIN_EXTERNAL_CXX=y BR2_INIT_NONE=y BR2_SYSTEM_BIN_SH_NONE=y # BR2_PACKAGE_BUSYBOX is not set # BR2_TARGET_ROOTFS_TAR is not set EOF $ make olddefconfig $ make host-rustc Then I see: >>> host-rust-bin 1.27.1 Extracting xzcat /home/thomas/dl/rust-bin/rustc-1.27.1-x86_64-unknown-linux-gnu.tar.xz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1 -xf - mkdir -p /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/std xzcat /home/thomas/dl/rust-bin/rust-std-1.27.1-x86_64-unknown-linux-gnu.tar.xz | tar -C /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/std -xf - cd /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/rustc/lib/rustlib/x86_64-unknown-linux-gnu; ln -sf ../../../../std/rust-std-1.27.1-x86_64-unknown-linux-gnu/rust-std-x86_64-unknown-linux-gnu/lib/rustlib/x86_64-unknown-linux-gnu/lib >>> host-rust-bin 1.27.1 Patching >>> host-rust-bin 1.27.1 Configuring >>> host-rust-bin 1.27.1 Building >>> host-rust-bin 1.27.1 Installing to host directory And nothing gets installed in output/host. This is because BR2_PACKAGE_HOST_RUST_BIN is false, and therefore rust-bin.mk doesn't do much. I am not sure why rust-bin.mk has this condition: ifeq ($(BR2_PACKAGE_HOST_RUST_BIN),y) This condition shouldn't be necessary. So it should be removed, and instead HOST_RUST_BIN_INSTALL_LIBSTD_TARGET should be put within ifeq ($(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS),y). With this fixed, it does install a Rust compiler and host standard library, and I can successfully build and run a host Rust program, even if the NIOSII target architecture is not supported by Rust. Could you fix this issue and send an updated patch ? Note: I think your current patch is correct that the "host-rustc" package should *NOT* appear in menuconfig when the target architecture is not supported by Rust. Indeed, in such a case, Rust can only build host programs, and it's therefore a mere build dependency of some other package. Please add a comment above the definitions of BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS that all packages that use host-rustc to build host Rust programs should depend on this option. And a comment above BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS to say that all packages that use host-rustc to build target Rust programs should depend on this option. For the record, the current state of the patch I had after some fixes is at http://code.bulix.org/pqww33-400669. Thanks! Thomas
Hey Thomas! Thanks for putting some time into this, I was afraid it was going to sit forever because it's kind of a pain to test these kinds of changes. On Tue, Aug 21, 2018 at 3:06 PM Thomas Petazzoni <thomas.petazzoni@bootlin.com> wrote: > > Hello Sam, > > Thanks for taking the lead on this! > > On Mon, 16 Jul 2018 23:29:53 -0500, sam.voss@gmail.com wrote: > > From: Sam Voss <sam.voss@gmail.com> > > > > Modify host-rust virtual package to default to host-rust-bin when no > > other selection has been made, as long as the host supports rust. This > > allows host only tools to still use rust when the target architecture > > does not support it. [snip] > > ifeq ($(BR2_PACKAGE_JEMALLOC),y) > > HOST_RUST_DEPENDENCIES += jemalloc > > HOST_RUST_JEMALLOC_ENABLED = true > > diff --git a/package/rustc/Config.in.host b/package/rustc/Config.in.host > > index 2ae8f89d3f..d7f0efcd3f 100644 > > --- a/package/rustc/Config.in.host > > +++ b/package/rustc/Config.in.host > > @@ -14,6 +14,19 @@ config BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS > > depends on BR2_TOOLCHAIN_USES_GLIBC > > depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" > > I think you need to remove all the architecture dependencies here: > host-rust is always available, as long as the host architecture is > x86-64 or x86. Ah, defaulting -y instead of depending makes sense. Thanks for pointing this out. > The glibc dependency should also be removed, as we don't > have any way of expressing a "we depend on a host machine with glibc" > dependency today. > > > +config BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS > > + bool > > + default y if BR2_i386 > > + default y if BR2_x86_64 > > + default y if BR2_aarch64 > > + default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 \ > > + && !(BR2_ARM_CPU_ARMV7A && BR2_ARM_EABI) > > + default y if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le > > + default y if (BR2_mips || BR2_mipsel) && !BR2_MIPS_CPU_MIPS32R6 > > + default y if (BR2_mips64 || BR2_mips64el) && !BR2_MIPS_CPU_MIPS64R6 \ > > + && BR2_MIPS_NABI64 > > The glibc dependency should be re-added here. > > > + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS > > + > > config BR2_PACKAGE_HOST_RUSTC_ARCH > > string > > default "armv7" if BR2_ARM_CPU_ARMV7A > > @@ -66,9 +79,11 @@ config BR2_PACKAGE_HOST_RUST_BIN > > > > endchoice > > > > +endif > > + > > config BR2_PACKAGE_PROVIDES_HOST_RUSTC > > string > > default "host-rust" if BR2_PACKAGE_HOST_RUST > > - default "host-rust-bin" if BR2_PACKAGE_HOST_RUST_BIN > > - > > -endif > > + # Default to host-rust-bin as long as host arch supports it > > + default "host-rust-bin" if !BR2_PACKAGE_HOST_RUST > > + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS > > However, even with those changes, if I do: > > $ cat > .config <<EOF > BR2_nios2=y > BR2_TOOLCHAIN_EXTERNAL=y > BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y > BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y > BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-nios2-full-2018.05.tar.bz2" > BR2_TOOLCHAIN_EXTERNAL_GCC_6=y > BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_16=y > BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y > # BR2_TOOLCHAIN_EXTERNAL_HAS_SSP is not set > BR2_TOOLCHAIN_EXTERNAL_CXX=y > BR2_INIT_NONE=y > BR2_SYSTEM_BIN_SH_NONE=y > # BR2_PACKAGE_BUSYBOX is not set > # BR2_TARGET_ROOTFS_TAR is not set > EOF > $ make olddefconfig > $ make host-rustc > > Then I see: > > >>> host-rust-bin 1.27.1 Extracting > xzcat /home/thomas/dl/rust-bin/rustc-1.27.1-x86_64-unknown-linux-gnu.tar.xz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1 -xf - > mkdir -p /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/std > xzcat /home/thomas/dl/rust-bin/rust-std-1.27.1-x86_64-unknown-linux-gnu.tar.xz | tar -C /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/std -xf - > cd /home/thomas/projets/buildroot/output/build/host-rust-bin-1.27.1/rustc/lib/rustlib/x86_64-unknown-linux-gnu; ln -sf ../../../../std/rust-std-1.27.1-x86_64-unknown-linux-gnu/rust-std-x86_64-unknown-linux-gnu/lib/rustlib/x86_64-unknown-linux-gnu/lib > >>> host-rust-bin 1.27.1 Patching > >>> host-rust-bin 1.27.1 Configuring > >>> host-rust-bin 1.27.1 Building > >>> host-rust-bin 1.27.1 Installing to host directory > > And nothing gets installed in output/host. This is because > BR2_PACKAGE_HOST_RUST_BIN is false, and therefore rust-bin.mk doesn't > do much. I am not sure why rust-bin.mk has this condition: > > ifeq ($(BR2_PACKAGE_HOST_RUST_BIN),y) > > This condition shouldn't be necessary. So it should be removed, and > instead HOST_RUST_BIN_INSTALL_LIBSTD_TARGET should be put within ifeq > ($(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS),y). > > With this fixed, it does install a Rust compiler and host standard > library, and I can successfully build and run a host Rust program, even > if the NIOSII target architecture is not supported by Rust. > > Could you fix this issue and send an updated patch ? > > Note: I think your current patch is correct that the "host-rustc" > package should *NOT* appear in menuconfig when the target architecture > is not supported by Rust. Indeed, in such a case, Rust can only build > host programs, and it's therefore a mere build dependency of some other > package. > > Please add a comment above the definitions of > BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS that all packages that use > host-rustc to build host Rust programs should depend on this option. > And a comment above BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS to say > that all packages that use host-rustc to build target Rust programs > should depend on this option. Added > > For the record, the current state of the patch I had after some fixes > is at http://code.bulix.org/pqww33-400669. Fantastic, testing now and will send a rev 2 shortly Thanks! Sam
diff --git a/package/rust-bin/rust-bin.mk b/package/rust-bin/rust-bin.mk index e10dbcebd0..c426da8d15 100644 --- a/package/rust-bin/rust-bin.mk +++ b/package/rust-bin/rust-bin.mk @@ -15,7 +15,10 @@ HOST_RUST_BIN_SOURCE = rustc-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME).tar.xz HOST_RUST_BIN_EXTRA_DOWNLOADS = \ rust-std-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME).tar.xz \ - rust-std-$(RUST_BIN_VERSION)-$(RUSTC_TARGET_NAME).tar.xz + +ifeq ($(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS),y) +HOST_RUST_BIN_EXTRA_DOWNLOADS += rust-std-$(RUST_BIN_VERSION)-$(RUSTC_TARGET_NAME).tar.xz +endif HOST_RUST_BIN_LIBSTD_HOST_PREFIX = rust-std-$(RUST_BIN_VERSION)-$(RUSTC_HOST_NAME)/rust-std-$(RUSTC_HOST_NAME) diff --git a/package/rust/rust.mk b/package/rust/rust.mk index af5c366495..c11dbb23b0 100644 --- a/package/rust/rust.mk +++ b/package/rust/rust.mk @@ -19,6 +19,7 @@ HOST_RUST_DEPENDENCIES = \ host-python \ $(BR2_CMAKE_HOST_DEPENDENCY) + ifeq ($(BR2_PACKAGE_JEMALLOC),y) HOST_RUST_DEPENDENCIES += jemalloc HOST_RUST_JEMALLOC_ENABLED = true diff --git a/package/rustc/Config.in.host b/package/rustc/Config.in.host index 2ae8f89d3f..d7f0efcd3f 100644 --- a/package/rustc/Config.in.host +++ b/package/rustc/Config.in.host @@ -14,6 +14,19 @@ config BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS depends on BR2_TOOLCHAIN_USES_GLIBC depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" +config BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS + bool + default y if BR2_i386 + default y if BR2_x86_64 + default y if BR2_aarch64 + default y if BR2_arm && !BR2_ARM_CPU_ARMV4 && !BR2_ARM_CPU_ARMV5 \ + && !(BR2_ARM_CPU_ARMV7A && BR2_ARM_EABI) + default y if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le + default y if (BR2_mips || BR2_mipsel) && !BR2_MIPS_CPU_MIPS32R6 + default y if (BR2_mips64 || BR2_mips64el) && !BR2_MIPS_CPU_MIPS64R6 \ + && BR2_MIPS_NABI64 + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS + config BR2_PACKAGE_HOST_RUSTC_ARCH string default "armv7" if BR2_ARM_CPU_ARMV7A @@ -66,9 +79,11 @@ config BR2_PACKAGE_HOST_RUST_BIN endchoice +endif + config BR2_PACKAGE_PROVIDES_HOST_RUSTC string default "host-rust" if BR2_PACKAGE_HOST_RUST - default "host-rust-bin" if BR2_PACKAGE_HOST_RUST_BIN - -endif + # Default to host-rust-bin as long as host arch supports it + default "host-rust-bin" if !BR2_PACKAGE_HOST_RUST + depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS diff --git a/package/rustc/rustc.mk b/package/rustc/rustc.mk index bed74f3c2c..6eea9b4fc5 100644 --- a/package/rustc/rustc.mk +++ b/package/rustc/rustc.mk @@ -7,7 +7,9 @@ RUSTC_ARCH = $(call qstrip,$(BR2_PACKAGE_HOST_RUSTC_ARCH)) RUSTC_ABI = $(call qstrip,$(BR2_PACKAGE_HOST_RUSTC_ABI)) +ifeq ($(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS),y) RUSTC_TARGET_NAME = $(RUSTC_ARCH)-unknown-linux-gnu$(RUSTC_ABI) +endif ifeq ($(HOSTARCH),x86) RUSTC_HOST_ARCH = i686