| Message ID | 20180711094758.1670-1-f.fainelli@gmail.com |
|---|---|
| State | Accepted, archived |
| Delegated to: | David Miller |
| Headers | show |
| Series | [net] net: systemport: Fix CRC forwarding check for SYSTEMPORT Lite | expand |
From: Florian Fainelli <f.fainelli@gmail.com> Date: Wed, 11 Jul 2018 02:47:58 -0700 > SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the > GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit > is not set by default. Fix the logic such that we properly check whether > that bit is set or not and we don't forward an extra 4 bytes to the > network stack. > > Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Applied.
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index d5fca2e5a9bc..a1f60f89e059 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1946,8 +1946,8 @@ static int bcm_sysport_open(struct net_device *dev) if (!priv->is_lite) priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD); else - priv->crc_fwd = !!(gib_readl(priv, GIB_CONTROL) & - GIB_FCS_STRIP); + priv->crc_fwd = !((gib_readl(priv, GIB_CONTROL) & + GIB_FCS_STRIP) >> GIB_FCS_STRIP_SHIFT); phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link, 0, priv->phy_interface); diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index d6e5d0cbf3a3..cf440b91fd04 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -278,7 +278,8 @@ struct bcm_rsb { #define GIB_GTX_CLK_EXT_CLK (0 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_125MHZ (1 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_250MHZ (2 << GIB_GTX_CLK_SEL_SHIFT) -#define GIB_FCS_STRIP (1 << 6) +#define GIB_FCS_STRIP_SHIFT 6 +#define GIB_FCS_STRIP (1 << GIB_FCS_STRIP_SHIFT) #define GIB_LCL_LOOP_EN (1 << 7) #define GIB_LCL_LOOP_TXEN (1 << 8) #define GIB_RMT_LOOP_EN (1 << 9)
SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++-- drivers/net/ethernet/broadcom/bcmsysport.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-)