Message ID | 20180711152529.24547-5-miquel.raynal@bootlin.com |
---|---|
State | Superseded |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | SPI-NAND support | expand |
On Wed, 11 Jul 2018 17:25:12 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > Some MTD sublayers/drivers are implementing ->_read/write() and > not ->_read/write_oob(). > > While for NAND devices both are usually valid, for NOR devices, using > the _oob variant has no real meaning. But, as the MTD layer is supposed > to hide as much as possible the flash complexity to the user, there is > no reason to error out while it is just a matter of rewritting things > internally. > > Add a fallback on mtd->_read() (resp. mtd->_write()) when the user calls > mtd_read_oob() (resp. mtd_write_oob()) while mtd->_read_oob() (resp. > mtd->_write_oob) is not implemented. There is already a fallback on the > _oob variant if the former is used. Now I'm jealous. Can we have the same thing Linux :-). > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mtd/mtdcore.c | 26 ++++++++++++++++++++------ > 1 file changed, 20 insertions(+), 6 deletions(-) > > diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c > index ba170f212e..095c58cf8c 100644 > --- a/drivers/mtd/mtdcore.c > +++ b/drivers/mtd/mtdcore.c > @@ -1048,20 +1048,27 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) > { > int ret_code; > ops->retlen = ops->oobretlen = 0; > - if (!mtd->_read_oob) > - return -EOPNOTSUPP; > > ret_code = mtd_check_oob_ops(mtd, from, ops); > if (ret_code) > return ret_code; > > + /* Check the validity of a potential fallback on mtd->_read */ > + if ((!mtd->_read_oob) && (!mtd->_read || ops->oobbuf)) Parens around !mtd->_read_oob are not needed. > + return -EOPNOTSUPP; > + > + if (mtd->_read_oob) > + ret_code = mtd->_read_oob(mtd, from, ops); > + else > + ret_code = mtd->_read(mtd, from, ops->len, &ops->retlen, > + ops->datbuf); > + > /* > * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics > * similar to mtd->_read(), returning a non-negative integer > * representing max bitflips. In other cases, mtd->_read_oob() may > * return -EUCLEAN. In all cases, perform similar logic to mtd_read(). > */ > - ret_code = mtd->_read_oob(mtd, from, ops); > if (unlikely(ret_code < 0)) > return ret_code; > if (mtd->ecc_strength == 0) > @@ -1076,8 +1083,7 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to, > int ret; > > ops->retlen = ops->oobretlen = 0; > - if (!mtd->_write_oob) > - return -EOPNOTSUPP; > + > if (!(mtd->flags & MTD_WRITEABLE)) > return -EROFS; > > @@ -1085,7 +1091,15 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to, > if (ret) > return ret; > > - return mtd->_write_oob(mtd, to, ops); > + /* Check the validity of a potential fallback on mtd->_write */ > + if ((!mtd->_write_oob) && (!mtd->_write || ops->oobbuf)) Ditto. > + return -EOPNOTSUPP; > + > + if (mtd->_write_oob) > + return mtd->_write_oob(mtd, to, ops); > + else > + return mtd->_write(mtd, to, ops->len, &ops->retlen, > + ops->datbuf); > } > EXPORT_SYMBOL_GPL(mtd_write_oob); >
Hi Boris, Boris Brezillon <boris.brezillon@bootlin.com> wrote on Thu, 12 Jul 2018 00:20:52 +0200: > On Wed, 11 Jul 2018 17:25:12 +0200 > Miquel Raynal <miquel.raynal@bootlin.com> wrote: > > > Some MTD sublayers/drivers are implementing ->_read/write() and > > not ->_read/write_oob(). > > > > While for NAND devices both are usually valid, for NOR devices, using > > the _oob variant has no real meaning. But, as the MTD layer is supposed > > to hide as much as possible the flash complexity to the user, there is > > no reason to error out while it is just a matter of rewritting things > > internally. > > > > Add a fallback on mtd->_read() (resp. mtd->_write()) when the user calls > > mtd_read_oob() (resp. mtd_write_oob()) while mtd->_read_oob() (resp. > > mtd->_write_oob) is not implemented. There is already a fallback on the > > _oob variant if the former is used. > > Now I'm jealous. Can we have the same thing Linux :-). U-Boot, one step ahead ;) > > > > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > > --- > > drivers/mtd/mtdcore.c | 26 ++++++++++++++++++++------ > > 1 file changed, 20 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c > > index ba170f212e..095c58cf8c 100644 > > --- a/drivers/mtd/mtdcore.c > > +++ b/drivers/mtd/mtdcore.c > > @@ -1048,20 +1048,27 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) > > { > > int ret_code; > > ops->retlen = ops->oobretlen = 0; > > - if (!mtd->_read_oob) > > - return -EOPNOTSUPP; > > > > ret_code = mtd_check_oob_ops(mtd, from, ops); > > if (ret_code) > > return ret_code; > > > > + /* Check the validity of a potential fallback on mtd->_read */ > > + if ((!mtd->_read_oob) && (!mtd->_read || ops->oobbuf)) > > Parens around !mtd->_read_oob are not needed. [...] > > - return mtd->_write_oob(mtd, to, ops); > > + /* Check the validity of a potential fallback on mtd->_write */ > > + if ((!mtd->_write_oob) && (!mtd->_write || ops->oobbuf)) > > Ditto. > Right! Thanks, Miquèl
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index ba170f212e..095c58cf8c 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1048,20 +1048,27 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { int ret_code; ops->retlen = ops->oobretlen = 0; - if (!mtd->_read_oob) - return -EOPNOTSUPP; ret_code = mtd_check_oob_ops(mtd, from, ops); if (ret_code) return ret_code; + /* Check the validity of a potential fallback on mtd->_read */ + if ((!mtd->_read_oob) && (!mtd->_read || ops->oobbuf)) + return -EOPNOTSUPP; + + if (mtd->_read_oob) + ret_code = mtd->_read_oob(mtd, from, ops); + else + ret_code = mtd->_read(mtd, from, ops->len, &ops->retlen, + ops->datbuf); + /* * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics * similar to mtd->_read(), returning a non-negative integer * representing max bitflips. In other cases, mtd->_read_oob() may * return -EUCLEAN. In all cases, perform similar logic to mtd_read(). */ - ret_code = mtd->_read_oob(mtd, from, ops); if (unlikely(ret_code < 0)) return ret_code; if (mtd->ecc_strength == 0) @@ -1076,8 +1083,7 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to, int ret; ops->retlen = ops->oobretlen = 0; - if (!mtd->_write_oob) - return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; @@ -1085,7 +1091,15 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to, if (ret) return ret; - return mtd->_write_oob(mtd, to, ops); + /* Check the validity of a potential fallback on mtd->_write */ + if ((!mtd->_write_oob) && (!mtd->_write || ops->oobbuf)) + return -EOPNOTSUPP; + + if (mtd->_write_oob) + return mtd->_write_oob(mtd, to, ops); + else + return mtd->_write(mtd, to, ops->len, &ops->retlen, + ops->datbuf); } EXPORT_SYMBOL_GPL(mtd_write_oob);
Some MTD sublayers/drivers are implementing ->_read/write() and not ->_read/write_oob(). While for NAND devices both are usually valid, for NOR devices, using the _oob variant has no real meaning. But, as the MTD layer is supposed to hide as much as possible the flash complexity to the user, there is no reason to error out while it is just a matter of rewritting things internally. Add a fallback on mtd->_read() (resp. mtd->_write()) when the user calls mtd_read_oob() (resp. mtd_write_oob()) while mtd->_read_oob() (resp. mtd->_write_oob) is not implemented. There is already a fallback on the _oob variant if the former is used. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/mtdcore.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)