diff mbox series

[1/1] ARM: dts: s5pv210: Add missing interrupt-controller property to gph2

Message ID 1528640149-2195-1-git-send-email-pawel.mikolaj.chmiel@gmail.com
State New
Headers show
Series [1/1] ARM: dts: s5pv210: Add missing interrupt-controller property to gph2 | expand

Commit Message

Paweł Chmiel June 10, 2018, 2:15 p.m. UTC
This commit adds missing interrupt-controller property to gph2 block,
to silence following warnings during build
  /soc/pinctrl@e0200000/gph2: Missing interrupt-controller or interrupt-map property

Observed on not yet mainlined, an S5PV210 based
Samsung Galaxy S (i9000) phone.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Krzysztof Kozlowski June 11, 2018, 12:43 p.m. UTC | #1
On Sun, Jun 10, 2018 at 4:15 PM, Paweł Chmiel
<pawel.mikolaj.chmiel@gmail.com> wrote:
> This commit adds missing interrupt-controller property to gph2 block,

Just "Add missing". See:
https://elixir.bootlin.com/linux/latest/source/Documentation/process/submitting-patches.rst#L151

> to silence following warnings during build
>   /soc/pinctrl@e0200000/gph2: Missing interrupt-controller or interrupt-map property
>
> Observed on not yet mainlined, an S5PV210 based
> Samsung Galaxy S (i9000) phone.

The warning is not reproduceable (as you mentioned board is not
present in mainline) thus please skip it. Instead, either describe
existing reason for this change (e.g. because bindings require it for
node of every bank of pins supporting GPIO interrupts) or include this
in series mainlining new board (where the reason will be - it will be
used by new board etc).

Best regards,
Krzysztof
Paweł Chmiel June 11, 2018, 6:57 p.m. UTC | #2
On Monday, June 11, 2018 2:43:59 PM CEST Krzysztof Kozlowski wrote:
> On Sun, Jun 10, 2018 at 4:15 PM, Paweł Chmiel
> <pawel.mikolaj.chmiel@gmail.com> wrote:
> > This commit adds missing interrupt-controller property to gph2 block,
> 
> Just "Add missing". See:
> https://elixir.bootlin.com/linux/latest/source/Documentation/process/submitting-patches.rst#L151
> 
> > to silence following warnings during build
> >   /soc/pinctrl@e0200000/gph2: Missing interrupt-controller or interrupt-map property
> >
> > Observed on not yet mainlined, an S5PV210 based
> > Samsung Galaxy S (i9000) phone.
> 
> The warning is not reproduceable (as you mentioned board is not
> present in mainline) thus please skip it. Instead, either describe
> existing reason for this change (e.g. because bindings require it for
> node of every bank of pins supporting GPIO interrupts) or include this
> in series mainlining new board (where the reason will be - it will be
> used by new board etc).
> 
> Best regards,
> Krzysztof
> 
Ok, I'll send this patch (fixed) with other patches adding new board.

Thanks
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 3a79feab11c3..7f0c9d447871 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -258,6 +258,8 @@ 
 	gph2: gph2 {
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		interrupt-controller;
 		#interrupt-cells = <2>;
 	};