Message ID | no_message-id@ru |
---|---|
State | New |
Headers | show |
Series | gpio: pca953x: Clear irq trigger type on irq shutdown | expand |
On Fri, May 4, 2018 at 6:53 PM, Grigoryev Denis <grigoryev@fastwel.ru> wrote: > The driver stores the result of irq_set_type() in the internal variables > irq_trig_raise and irq_trig_fall, which later are used to determine > the GPIOs that must be re-configured as input. These variables retain their > value between gpiolib's export / unexport, resulting in an incorrect > state in some cases. The corresponding bits in the variables > irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown(). > > Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> > --- > drivers/gpio/gpio-pca953x.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c > index d2ead4b..b41be8c 100644 > --- a/drivers/gpio/gpio-pca953x.c > +++ b/drivers/gpio/gpio-pca953x.c > @@ -522,6 +522,15 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type) > return 0; > } > > +static void pca953x_irq_shutdown(struct irq_data *d) > +{ > + struct pca953x_chip *chip = irq_data_get_irq_chip_data(d); > + u8 mask = 1 << (d->hwirq % BANK_SZ); > + > + chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask; > + chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask; > +} > + > static struct irq_chip pca953x_irq_chip = { > .name = "pca953x", > .irq_mask = pca953x_irq_mask, > @@ -529,6 +538,7 @@ static struct irq_chip pca953x_irq_chip = { > .irq_bus_lock = pca953x_irq_bus_lock, > .irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock, > .irq_set_type = pca953x_irq_set_type, > + .irq_shutdown = pca953x_irq_shutdown, > }; This driver has a big set of users, so putting some maintainers in the loop so we can get some patch review. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2018-05-16 at 14:51 +0200, Linus Walleij wrote: > On Fri, May 4, 2018 at 6:53 PM, Grigoryev Denis <grigoryev@fastwel.ru> > wrote: > If it's full context below, the patch looks good enough to me (assuming it works and doesn't break things on other chips like PCAL variants). Though, I didn't read the code carefully (not enough time this week). Thus, FWIW, Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> with above caveats in mind. > > The driver stores the result of irq_set_type() in the internal > > variables > > irq_trig_raise and irq_trig_fall, which later are used to determine > > the GPIOs that must be re-configured as input. These variables > > retain their > > value between gpiolib's export / unexport, resulting in an > > incorrect > > state in some cases. The corresponding bits in the variables > > irq_trig_raise and irq_trig_fall should be cleared in > > irq_shutdown(). > > > > Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> > > --- > > drivers/gpio/gpio-pca953x.c | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio- > > pca953x.c > > index d2ead4b..b41be8c 100644 > > --- a/drivers/gpio/gpio-pca953x.c > > +++ b/drivers/gpio/gpio-pca953x.c > > @@ -522,6 +522,15 @@ static int pca953x_irq_set_type(struct irq_data > > *d, unsigned int type) > > return 0; > > } > > > > +static void pca953x_irq_shutdown(struct irq_data *d) > > +{ > > + struct pca953x_chip *chip = irq_data_get_irq_chip_data(d); > > + u8 mask = 1 << (d->hwirq % BANK_SZ); > > + > > + chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask; > > + chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask; > > +} > > + > > static struct irq_chip pca953x_irq_chip = { > > .name = "pca953x", > > .irq_mask = pca953x_irq_mask, > > @@ -529,6 +538,7 @@ static struct irq_chip pca953x_irq_chip = { > > .irq_bus_lock = pca953x_irq_bus_lock, > > .irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock, > > .irq_set_type = pca953x_irq_set_type, > > + .irq_shutdown = pca953x_irq_shutdown, > > }; > > This driver has a big set of users, so putting some maintainers > in the loop so we can get some patch review. > > Yours, > Linus Walleij
On Fri, May 4, 2018 at 6:53 PM, Grigoryev Denis <grigoryev@fastwel.ru> wrote: > The driver stores the result of irq_set_type() in the internal variables > irq_trig_raise and irq_trig_fall, which later are used to determine > the GPIOs that must be re-configured as input. These variables retain their > value between gpiolib's export / unexport, resulting in an incorrect > state in some cases. The corresponding bits in the variables > irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown(). > > Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> Patch applied with Andy's ACK. If there are issues we can just revert it. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index d2ead4b..b41be8c 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -522,6 +522,15 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type) return 0; } +static void pca953x_irq_shutdown(struct irq_data *d) +{ + struct pca953x_chip *chip = irq_data_get_irq_chip_data(d); + u8 mask = 1 << (d->hwirq % BANK_SZ); + + chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask; + chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask; +} + static struct irq_chip pca953x_irq_chip = { .name = "pca953x", .irq_mask = pca953x_irq_mask, @@ -529,6 +538,7 @@ static struct irq_chip pca953x_irq_chip = { .irq_bus_lock = pca953x_irq_bus_lock, .irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock, .irq_set_type = pca953x_irq_set_type, + .irq_shutdown = pca953x_irq_shutdown, }; static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
The driver stores the result of irq_set_type() in the internal variables irq_trig_raise and irq_trig_fall, which later are used to determine the GPIOs that must be re-configured as input. These variables retain their value between gpiolib's export / unexport, resulting in an incorrect state in some cases. The corresponding bits in the variables irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown(). Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> --- drivers/gpio/gpio-pca953x.c | 10 ++++++++++ 1 file changed, 10 insertions(+)