| Message ID | 1527065564-9127-1-git-send-email-phil.edworthy@renesas.com |
|---|---|
| State | New |
| Headers | show |
| Series | gpio: dwapb: Rework support for 1 interrupt per port A GPIO | expand |
On Wed, May 23, 2018 at 09:52:44AM +0100, Phil Edworthy wrote: > Treat DT and ACPI the same as much as possible. Note that we can't use > platform_get_irq() to get the DT interrupts as they are in the port > sub-node and hence do not have an associated platform device. > > This also fixes a problem introduced with error checking when calling > platform_get_irq(). What is the problem? In general I think fixes should be in separate patches. > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > --- > drivers/gpio/gpio-dwapb.c | 53 ++++++++++++++++++++--------------------------- > 1 file changed, 22 insertions(+), 31 deletions(-) > > diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c > index 7dcd06b..15b4154 100644 > --- a/drivers/gpio/gpio-dwapb.c > +++ b/drivers/gpio/gpio-dwapb.c > @@ -444,7 +444,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, > int i; > > for (i = 0; i < pp->ngpio; i++) { > - if (pp->irq[i]) > + if (pp->irq[i] >= 0) > irq_set_chained_handler_and_data(pp->irq[i], > dwapb_irq_handler, gpio); > } > @@ -562,7 +562,7 @@ dwapb_gpio_get_pdata(struct device *dev) > struct dwapb_platform_data *pdata; > struct dwapb_port_property *pp; > int nports; > - int i; > + int i, j; > > nports = device_get_child_node_count(dev); > if (nports == 0) > @@ -580,6 +580,8 @@ dwapb_gpio_get_pdata(struct device *dev) > > i = 0; > device_for_each_child_node(dev, fwnode) { > + struct device_node *np = NULL; > + > pp = &pdata->properties[i++]; > pp->fwnode = fwnode; > > @@ -599,46 +601,35 @@ dwapb_gpio_get_pdata(struct device *dev) > pp->ngpio = 32; > } > > + pp->irq_shared = false; > + pp->gpio_base = -1; > + > /* > * Only port A can provide interrupts in all configurations of > * the IP. > */ > - if (dev->of_node && pp->idx == 0 && > - fwnode_property_read_bool(fwnode, > - "interrupt-controller")) { > - struct device_node *np = to_of_node(fwnode); > - unsigned int j; > - > - /* > - * The IP has configuration options to allow a single > - * combined interrupt or one per gpio. If one per gpio, > - * some might not be used. > - */ > - for (j = 0; j < pp->ngpio; j++) { > - int irq = of_irq_get(np, j); > - if (irq < 0) > - continue; > - > - pp->irq[j] = irq; > - pp->has_irq = true; > - } > + if (pp->idx != 0) > + continue; > > - if (!pp->has_irq) > - dev_warn(dev, "no irq for port%d\n", pp->idx); > + if (dev->of_node && fwnode_property_read_bool(fwnode, > + "interrupt-controller")) { > + np = to_of_node(fwnode); > } > > - if (has_acpi_companion(dev) && pp->idx == 0) { > - unsigned int j; > + for (j = 0; j < pp->ngpio; j++) { > + pp->irq[j] = -ENXIO; > > - for (j = 0; j < pp->ngpio; j++) { > + if (np) > + pp->irq[j] = of_irq_get(np, j); > + else if (has_acpi_companion(dev)) > pp->irq[j] = platform_get_irq(to_platform_device(dev), j); > - if (pp->irq[j]) > - pp->has_irq = true; > - } > + > + if (pp->irq[j] >= 0) > + pp->has_irq = true; > } > > - pp->irq_shared = false; > - pp->gpio_base = -1; > + if (!pp->has_irq) > + dev_warn(dev, "no irq for port%d\n", pp->idx); > } > > return pdata; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Simon, On 23 May 2018 10:12 Simon Horman wrote: > On Wed, May 23, 2018 at 09:52:44AM +0100, Phil Edworthy wrote: > > Treat DT and ACPI the same as much as possible. Note that we can't use > > platform_get_irq() to get the DT interrupts as they are in the port > > sub-node and hence do not have an associated platform device. > > > > This also fixes a problem introduced with error checking when calling > > platform_get_irq(). > > What is the problem? In general I think fixes should be in separate patches. The ACPI code would ignore errors returned by platform_get_irq(), instead treating the error as an interrupt number. Andy Shevchenko provided some late feedback to the v5 patch, but v5 was already applied by Linus W. This patch just has the incremental changes that were made in v6 of the patch. BR Phil > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > > --- > > drivers/gpio/gpio-dwapb.c | 53 > > ++++++++++++++++++++--------------------------- > > 1 file changed, 22 insertions(+), 31 deletions(-) > > > > diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c > > index 7dcd06b..15b4154 100644 > > --- a/drivers/gpio/gpio-dwapb.c > > +++ b/drivers/gpio/gpio-dwapb.c > > @@ -444,7 +444,7 @@ static void dwapb_configure_irqs(struct > dwapb_gpio *gpio, > > int i; > > > > for (i = 0; i < pp->ngpio; i++) { > > - if (pp->irq[i]) > > + if (pp->irq[i] >= 0) > > irq_set_chained_handler_and_data(pp- > >irq[i], > > dwapb_irq_handler, gpio); > > } > > @@ -562,7 +562,7 @@ dwapb_gpio_get_pdata(struct device *dev) > > struct dwapb_platform_data *pdata; > > struct dwapb_port_property *pp; > > int nports; > > - int i; > > + int i, j; > > > > nports = device_get_child_node_count(dev); > > if (nports == 0) > > @@ -580,6 +580,8 @@ dwapb_gpio_get_pdata(struct device *dev) > > > > i = 0; > > device_for_each_child_node(dev, fwnode) { > > + struct device_node *np = NULL; > > + > > pp = &pdata->properties[i++]; > > pp->fwnode = fwnode; > > > > @@ -599,46 +601,35 @@ dwapb_gpio_get_pdata(struct device *dev) > > pp->ngpio = 32; > > } > > > > + pp->irq_shared = false; > > + pp->gpio_base = -1; > > + > > /* > > * Only port A can provide interrupts in all configurations of > > * the IP. > > */ > > - if (dev->of_node && pp->idx == 0 && > > - fwnode_property_read_bool(fwnode, > > - "interrupt-controller")) { > > - struct device_node *np = to_of_node(fwnode); > > - unsigned int j; > > - > > - /* > > - * The IP has configuration options to allow a single > > - * combined interrupt or one per gpio. If one per > gpio, > > - * some might not be used. > > - */ > > - for (j = 0; j < pp->ngpio; j++) { > > - int irq = of_irq_get(np, j); > > - if (irq < 0) > > - continue; > > - > > - pp->irq[j] = irq; > > - pp->has_irq = true; > > - } > > + if (pp->idx != 0) > > + continue; > > > > - if (!pp->has_irq) > > - dev_warn(dev, "no irq for port%d\n", pp- > >idx); > > + if (dev->of_node && fwnode_property_read_bool(fwnode, > > + "interrupt-controller")) { > > + np = to_of_node(fwnode); > > } > > > > - if (has_acpi_companion(dev) && pp->idx == 0) { > > - unsigned int j; > > + for (j = 0; j < pp->ngpio; j++) { > > + pp->irq[j] = -ENXIO; > > > > - for (j = 0; j < pp->ngpio; j++) { > > + if (np) > > + pp->irq[j] = of_irq_get(np, j); > > + else if (has_acpi_companion(dev)) > > pp->irq[j] = > platform_get_irq(to_platform_device(dev), j); > > - if (pp->irq[j]) > > - pp->has_irq = true; > > - } > > + > > + if (pp->irq[j] >= 0) > > + pp->has_irq = true; > > } > > > > - pp->irq_shared = false; > > - pp->gpio_base = -1; > > + if (!pp->has_irq) > > + dev_warn(dev, "no irq for port%d\n", pp->idx); > > } > > > > return pdata; > > -- > > 2.7.4 > > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, May 23, 2018 at 10:52 AM, Phil Edworthy <phil.edworthy@renesas.com> wrote: > Treat DT and ACPI the same as much as possible. Note that we can't use > platform_get_irq() to get the DT interrupts as they are in the port > sub-node and hence do not have an associated platform device. > > This also fixes a problem introduced with error checking when calling > platform_get_irq(). > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> OK this patch applied! Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 7dcd06b..15b4154 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -444,7 +444,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, int i; for (i = 0; i < pp->ngpio; i++) { - if (pp->irq[i]) + if (pp->irq[i] >= 0) irq_set_chained_handler_and_data(pp->irq[i], dwapb_irq_handler, gpio); } @@ -562,7 +562,7 @@ dwapb_gpio_get_pdata(struct device *dev) struct dwapb_platform_data *pdata; struct dwapb_port_property *pp; int nports; - int i; + int i, j; nports = device_get_child_node_count(dev); if (nports == 0) @@ -580,6 +580,8 @@ dwapb_gpio_get_pdata(struct device *dev) i = 0; device_for_each_child_node(dev, fwnode) { + struct device_node *np = NULL; + pp = &pdata->properties[i++]; pp->fwnode = fwnode; @@ -599,46 +601,35 @@ dwapb_gpio_get_pdata(struct device *dev) pp->ngpio = 32; } + pp->irq_shared = false; + pp->gpio_base = -1; + /* * Only port A can provide interrupts in all configurations of * the IP. */ - if (dev->of_node && pp->idx == 0 && - fwnode_property_read_bool(fwnode, - "interrupt-controller")) { - struct device_node *np = to_of_node(fwnode); - unsigned int j; - - /* - * The IP has configuration options to allow a single - * combined interrupt or one per gpio. If one per gpio, - * some might not be used. - */ - for (j = 0; j < pp->ngpio; j++) { - int irq = of_irq_get(np, j); - if (irq < 0) - continue; - - pp->irq[j] = irq; - pp->has_irq = true; - } + if (pp->idx != 0) + continue; - if (!pp->has_irq) - dev_warn(dev, "no irq for port%d\n", pp->idx); + if (dev->of_node && fwnode_property_read_bool(fwnode, + "interrupt-controller")) { + np = to_of_node(fwnode); } - if (has_acpi_companion(dev) && pp->idx == 0) { - unsigned int j; + for (j = 0; j < pp->ngpio; j++) { + pp->irq[j] = -ENXIO; - for (j = 0; j < pp->ngpio; j++) { + if (np) + pp->irq[j] = of_irq_get(np, j); + else if (has_acpi_companion(dev)) pp->irq[j] = platform_get_irq(to_platform_device(dev), j); - if (pp->irq[j]) - pp->has_irq = true; - } + + if (pp->irq[j] >= 0) + pp->has_irq = true; } - pp->irq_shared = false; - pp->gpio_base = -1; + if (!pp->has_irq) + dev_warn(dev, "no irq for port%d\n", pp->idx); } return pdata;
Treat DT and ACPI the same as much as possible. Note that we can't use platform_get_irq() to get the DT interrupts as they are in the port sub-node and hence do not have an associated platform device. This also fixes a problem introduced with error checking when calling platform_get_irq(). Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> --- drivers/gpio/gpio-dwapb.c | 53 ++++++++++++++++++++--------------------------- 1 file changed, 22 insertions(+), 31 deletions(-)