diff mbox series

[v3,2/3] Documentation/i2c: sync docs with current state of i2c-tools

Message ID 20180413174257.139182-2-hansens@google.com
State Accepted
Headers show
Series [v3,1/3] Documentation/i2c: whitespace cleanup | expand

Commit Message

Sam Hansen April 13, 2018, 5:42 p.m. UTC
Currently, Documentation/i2c/dev-interface describes the use of
i2c_smbus_* helper routines as static inlined functions provided by
linux/i2c-dev.h.  Work has been done to refactor the linux/i2c-dev.h file
in the i2c-tools project out into its own library.  As a result, these
docs have become stale.

This patch corrects the discrepancy and directs the reader to the
i2c-tools project for more information.

Signed-off-by: Sam Hansen <hansens@google.com>
---
No changes from v2.

 Documentation/i2c/dev-interface | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

Comments

Wolfram Sang April 18, 2018, 8:09 a.m. UTC | #1
On Fri, Apr 13, 2018 at 10:42:56AM -0700, Sam Hansen wrote:
> Currently, Documentation/i2c/dev-interface describes the use of
> i2c_smbus_* helper routines as static inlined functions provided by
> linux/i2c-dev.h.  Work has been done to refactor the linux/i2c-dev.h file
> in the i2c-tools project out into its own library.  As a result, these
> docs have become stale.
> 
> This patch corrects the discrepancy and directs the reader to the
> i2c-tools project for more information.
> 
> Signed-off-by: Sam Hansen <hansens@google.com>

Applied to for-current, thanks!
Wolfram Sang April 18, 2018, 8:21 a.m. UTC | #2
> +The above functions are made available by linking against the libi2c library,
> +which is provided by the i2c-tools project.  See:
> +https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/.

In the beginning, we say that '#include <i2c/smbus.h>' is needed.
Shouldn't we mention i2c-tools there already and in what case it is
needed (only for SMBus)? I'd think so.

Sam, would you be open to do this as an incremental patch?
Sam Hansen April 18, 2018, 6:17 p.m. UTC | #3
On Wed, Apr 18, 2018 at 1:21 AM, Wolfram Sang <wsa@the-dreams.de> wrote:
>
>> +The above functions are made available by linking against the libi2c library,
>> +which is provided by the i2c-tools project.  See:
>> +https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/.
>
> In the beginning, we say that '#include <i2c/smbus.h>' is needed.
> Shouldn't we mention i2c-tools there already and in what case it is
> needed (only for SMBus)? I'd think so.
>
> Sam, would you be open to do this as an incremental patch?

Yup, I'll send an incremental patch touching this up, thanks.

>
diff mbox series

Patch

diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index c8737d502791..f92ee1f59914 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -23,11 +23,6 @@  First, you need to include these two headers:
   #include <linux/i2c-dev.h>
   #include <i2c/smbus.h>
 
-(Please note that there are two files named "i2c-dev.h" out there. One is
-distributed with the Linux kernel and the other one is included in the
-source tree of i2c-tools. They used to be different in content but since 2012
-they're identical. You should use "linux/i2c-dev.h").
-
 Now, you have to decide which adapter you want to access. You should
 inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this.
 Adapter numbers are assigned somewhat dynamically, so you can not
@@ -140,8 +135,8 @@  ioctl(file, I2C_RDWR, struct i2c_rdwr_ioctl_data *msgset)
   set in each message, overriding the values set with the above ioctl's.
 
 ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args)
-  Not meant to be called  directly; instead, use the access functions
-  below.
+  If possible, use the provided i2c_smbus_* methods described below instead
+  of issuing direct ioctls.
 
 You can do plain i2c transactions by using read(2) and write(2) calls.
 You do not need to pass the address byte; instead, set it through
@@ -166,10 +161,9 @@  what happened. The 'write' transactions return 0 on success; the
 returns the number of values read. The block buffers need not be longer
 than 32 bytes.
 
-The above functions are all inline functions, that resolve to calls to
-the i2c_smbus_access function, that on its turn calls a specific ioctl
-with the data in a specific format. Read the source code if you
-want to know what happens behind the screens.
+The above functions are made available by linking against the libi2c library,
+which is provided by the i2c-tools project.  See:
+https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/.
 
 
 Implementation details