| Message ID | 1520856370-15404-4-git-send-email-talgi@mellanox.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | None | expand |
[+cc Jacob] On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > Add pcie_print_link_status() function for querying and verifying > a PCI device link status. The PCI speed and width are reported > in kernel log. > This provides a unified method for all PCI devices to > report status and issues, instead of each device reporting in a > different way, using different code. > > Signed-off-by: Tal Gilboa <talgi@mellanox.com> > Reviewed-by: Tariq Toukan <tariqt@mellanox.com> > --- > drivers/pci/pci.c | 25 +++++++++++++++++++++++++ > include/linux/pci.h | 1 + > 2 files changed, 26 insertions(+) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 48b9fd6..ac876c4 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -5229,6 +5229,31 @@ int pcie_get_width_cap(struct pci_dev *dev, enum pcie_link_width *width) > EXPORT_SYMBOL(pcie_get_width_cap); > > /** > + * pcie_print_link_status - Reports the PCI device's link speed and width. > + * @dev: PCI device to query > + * > + * This function checks whether the PCI device current speed and width are equal > + * to the maximum PCI device capabilities. > + */ > +void pcie_print_link_status(struct pci_dev *dev) > +{ > + enum pcie_link_width width, width_cap; > + enum pci_bus_speed speed, speed_cap; > + > + pcie_get_speed_cap(dev, &speed_cap); > + pcie_get_width_cap(dev, &width_cap); > + pcie_get_minimum_link(dev, &speed, &width); > + > + if (speed == speed_cap && width == width_cap) > + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); > + else > + pci_info(dev, "%s x%d link (capable of %s x%d)\n", > + PCIE_SPEED2STR(speed), width, > + PCIE_SPEED2STR(speed_cap), width_cap); I think pcie_get_minimum_link() is misleading. This new use of it is very similar to the existing uses, but I think we should clean this up before using it in more places. pcie_get_minimum_link() finds the minimum speed and minimum link width (separately) across all the links in the path, and I don't think that's what we really want. What we *want* is the total bandwidth available to the device, because we're trying to learn if the device is capable of more than the fabric can deliver. That means we want to look at all the links in the path leading to the device and find the link with the lowest bandwidth, i.e., width * speed. Obviously this is not necessarily the link with the fewest lanes or the lowest link speed. I hinted at this before, but you thought it would result in more questions than answers [1], and I failed to continue the conversation. Let's continue it now :) Here are some straw-man interfaces to return a device's capabilities and the available bandwidth in MB/s: unsigned int pcie_bandwidth_capable(struct pci_dev *dev, enum pci_bus_speed *speed, enum pcie_link_width *width); unsigned int pcie_bandwidth_available(struct pci_dev *dev); Then we can compare the result with what "dev" is capable of, e.g., my_bw = pcie_bandwidth_capable(dev, &my_speed, &my_width); avail_bw = pcie_bandwidth_available(dev); if (avail_bw >= my_bw) pci_info(dev, "%d MB/s available bandwidth (%s x%d link)\n", my_bw, PCIE_SPEED2STR(my_speed), my_width); else pci_info(dev, "%d MB/s available bandwidth (capable of %d MB/s, %s x%d)\n", avail_bw, my_bw, PCIE_SPEED2STR(my_speed), my_width); Using GB/s would be nicer; I lazily used MB/s to avoid dealing with decimals, e.g., 2.5GB/s. [1] https://lkml.kernel.org/r/46f54e24-e65e-08c6-60b3-e34ffd79e91a@mellanox.com
> -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > Sent: Tuesday, March 20, 2018 7:05 AM > To: Tal Gilboa <talgi@mellanox.com> > Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- > pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E > <jacob.e.keller@intel.com> > Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log > > [+cc Jacob] > > > /** > > + * pcie_print_link_status - Reports the PCI device's link speed and width. > > + * @dev: PCI device to query > > + * > > + * This function checks whether the PCI device current speed and width are > equal > > + * to the maximum PCI device capabilities. > > + */ > > +void pcie_print_link_status(struct pci_dev *dev) > > +{ > > + enum pcie_link_width width, width_cap; > > + enum pci_bus_speed speed, speed_cap; > > + > > + pcie_get_speed_cap(dev, &speed_cap); > > + pcie_get_width_cap(dev, &width_cap); > > + pcie_get_minimum_link(dev, &speed, &width); > > + > > + if (speed == speed_cap && width == width_cap) > > + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); > > + else > > + pci_info(dev, "%s x%d link (capable of %s x%d)\n", > > + PCIE_SPEED2STR(speed), width, > > + PCIE_SPEED2STR(speed_cap), width_cap); > > I think pcie_get_minimum_link() is misleading. This new use of > it is very similar to the existing uses, but I think we should clean > this up before using it in more places. > Based on your outline here, I completely agree! > pcie_get_minimum_link() finds the minimum speed and minimum link width > (separately) across all the links in the path, and I don't think > that's what we really want. What we *want* is the total bandwidth > available to the device, because we're trying to learn if the device > is capable of more than the fabric can deliver. > > That means we want to look at all the links in the path leading to the > device and find the link with the lowest bandwidth, i.e., width * > speed. Obviously this is not necessarily the link with the fewest > lanes or the lowest link speed. > Wow, yep you're right! That is a very subtle difference, and one I wish I'd been more aware of prior to writing the get_minimum_link code. I *intended* the code to give a minimum bandwidth calculation. IMHO, this is a bug in pcie_get_minimum_link, and should be fixed there. > I hinted at this before, but you thought it would result in more > questions than answers [1], and I failed to continue the conversation. > > Let's continue it now :) > > Here are some straw-man interfaces to return a device's capabilities > and the available bandwidth in MB/s: > > unsigned int pcie_bandwidth_capable(struct pci_dev *dev, > enum pci_bus_speed *speed, > enum pcie_link_width *width); > unsigned int pcie_bandwidth_available(struct pci_dev *dev); > > Then we can compare the result with what "dev" is capable of, e.g., > > my_bw = pcie_bandwidth_capable(dev, &my_speed, &my_width); > avail_bw = pcie_bandwidth_available(dev); > if (avail_bw >= my_bw) > pci_info(dev, "%d MB/s available bandwidth (%s x%d link)\n", > my_bw, PCIE_SPEED2STR(my_speed), my_width); > else > pci_info(dev, "%d MB/s available bandwidth (capable of %d MB/s, %s x%d)\n", > avail_bw, my_bw, PCIE_SPEED2STR(my_speed), my_width); > > Using GB/s would be nicer; I lazily used MB/s to avoid dealing with > decimals, e.g., 2.5GB/s. MBs is better, imo for the same reason. I like the names here, they're easier to understand. Additionally, we can deprecate and remove pcie_get_minimum_link after fixing up the uses, since this functionality is what the pcie_get_minimum_link was *supposed* to provide. Thanks, Jake > > [1] https://lkml.kernel.org/r/46f54e24-e65e-08c6-60b3- > e34ffd79e91a@mellanox.com
On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > [+cc Jacob] > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: >> Add pcie_print_link_status() function for querying and verifying >> a PCI device link status. The PCI speed and width are reported >> in kernel log. >> This provides a unified method for all PCI devices to >> report status and issues, instead of each device reporting in a >> different way, using different code. >> >> Signed-off-by: Tal Gilboa <talgi@mellanox.com> >> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> >> --- >> drivers/pci/pci.c | 25 +++++++++++++++++++++++++ >> include/linux/pci.h | 1 + >> 2 files changed, 26 insertions(+) >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index 48b9fd6..ac876c4 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -5229,6 +5229,31 @@ int pcie_get_width_cap(struct pci_dev *dev, enum pcie_link_width *width) >> EXPORT_SYMBOL(pcie_get_width_cap); >> >> /** >> + * pcie_print_link_status - Reports the PCI device's link speed and width. >> + * @dev: PCI device to query >> + * >> + * This function checks whether the PCI device current speed and width are equal >> + * to the maximum PCI device capabilities. >> + */ >> +void pcie_print_link_status(struct pci_dev *dev) >> +{ >> + enum pcie_link_width width, width_cap; >> + enum pci_bus_speed speed, speed_cap; >> + >> + pcie_get_speed_cap(dev, &speed_cap); >> + pcie_get_width_cap(dev, &width_cap); >> + pcie_get_minimum_link(dev, &speed, &width); >> + >> + if (speed == speed_cap && width == width_cap) >> + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); >> + else >> + pci_info(dev, "%s x%d link (capable of %s x%d)\n", >> + PCIE_SPEED2STR(speed), width, >> + PCIE_SPEED2STR(speed_cap), width_cap); > > I think pcie_get_minimum_link() is misleading. This new use of > it is very similar to the existing uses, but I think we should clean > this up before using it in more places. > > pcie_get_minimum_link() finds the minimum speed and minimum link width > (separately) across all the links in the path, and I don't think > that's what we really want. What we *want* is the total bandwidth > available to the device, because we're trying to learn if the device > is capable of more than the fabric can deliver. > > That means we want to look at all the links in the path leading to the > device and find the link with the lowest bandwidth, i.e., width * > speed. Obviously this is not necessarily the link with the fewest > lanes or the lowest link speed. The problem I see here is we need to consider differences in PCIe gens. Let's consider this example: gen3 x4 device which down the chain goes over gen2 x8 pcie bridge. The device's bandwidth is D=4*8*(gen3 encoding) and the bridge's bandwidth is B=8*5*(gen2 encoding). D~=31.5 and B~=32. So it would seem like there's no issue, but don't we want to know we actually went up as gen2? > > I hinted at this before, but you thought it would result in more > questions than answers [1], and I failed to continue the conversation. You raised the concern of not knowing the device limiting the total bandwidth of the chain. I thought it was an argument against the idea, but maybe I misunderstood. Let's agree on a design (below) before I make anymore changes :). > > Let's continue it now :) > > Here are some straw-man interfaces to return a device's capabilities > and the available bandwidth in MB/s: > > unsigned int pcie_bandwidth_capable(struct pci_dev *dev, > enum pci_bus_speed *speed, > enum pcie_link_width *width); > unsigned int pcie_bandwidth_available(struct pci_dev *dev); > > Then we can compare the result with what "dev" is capable of, e.g., > > my_bw = pcie_bandwidth_capable(dev, &my_speed, &my_width); > avail_bw = pcie_bandwidth_available(dev); > if (avail_bw >= my_bw) Can it really be >? > pci_info(dev, "%d MB/s available bandwidth (%s x%d link)\n", > my_bw, PCIE_SPEED2STR(my_speed), my_width); > else > pci_info(dev, "%d MB/s available bandwidth (capable of %d MB/s, %s x%d)\n", > avail_bw, my_bw, PCIE_SPEED2STR(my_speed), my_width); > > Using GB/s would be nicer; I lazily used MB/s to avoid dealing with > decimals, e.g., 2.5GB/s. So let's see if we agree on the steps: 1. my_speed_cap, my_width_cap <- calculate device PCIe caps 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth 3. my_bw <- my_speed_cap * my_width_cap 4. If avail_bw == my_bw print available bandwidth + PCIe caps 5. Else print available bandwidth + limited by + capable bandwidth + PCIe caps What do you think? > > [1] https://lkml.kernel.org/r/46f54e24-e65e-08c6-60b3-e34ffd79e91a@mellanox.com >
On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: > On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > > [+cc Jacob] > > > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > > > Add pcie_print_link_status() function for querying and verifying > > > a PCI device link status. The PCI speed and width are reported > > > in kernel log. > > > This provides a unified method for all PCI devices to > > > report status and issues, instead of each device reporting in a > > > different way, using different code. > > > > > > Signed-off-by: Tal Gilboa <talgi@mellanox.com> > > > Reviewed-by: Tariq Toukan <tariqt@mellanox.com> > > > --- > > > drivers/pci/pci.c | 25 +++++++++++++++++++++++++ > > > include/linux/pci.h | 1 + > > > 2 files changed, 26 insertions(+) > > > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index 48b9fd6..ac876c4 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -5229,6 +5229,31 @@ int pcie_get_width_cap(struct pci_dev *dev, enum pcie_link_width *width) > > > EXPORT_SYMBOL(pcie_get_width_cap); > > > /** > > > + * pcie_print_link_status - Reports the PCI device's link speed and width. > > > + * @dev: PCI device to query > > > + * > > > + * This function checks whether the PCI device current speed and width are equal > > > + * to the maximum PCI device capabilities. > > > + */ > > > +void pcie_print_link_status(struct pci_dev *dev) > > > +{ > > > + enum pcie_link_width width, width_cap; > > > + enum pci_bus_speed speed, speed_cap; > > > + > > > + pcie_get_speed_cap(dev, &speed_cap); > > > + pcie_get_width_cap(dev, &width_cap); > > > + pcie_get_minimum_link(dev, &speed, &width); > > > + > > > + if (speed == speed_cap && width == width_cap) > > > + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); > > > + else > > > + pci_info(dev, "%s x%d link (capable of %s x%d)\n", > > > + PCIE_SPEED2STR(speed), width, > > > + PCIE_SPEED2STR(speed_cap), width_cap); > > > > I think pcie_get_minimum_link() is misleading. This new use of > > it is very similar to the existing uses, but I think we should clean > > this up before using it in more places. > > > > pcie_get_minimum_link() finds the minimum speed and minimum link width > > (separately) across all the links in the path, and I don't think > > that's what we really want. What we *want* is the total bandwidth > > available to the device, because we're trying to learn if the device > > is capable of more than the fabric can deliver. > > > > That means we want to look at all the links in the path leading to the > > device and find the link with the lowest bandwidth, i.e., width * > > speed. Obviously this is not necessarily the link with the fewest > > lanes or the lowest link speed. > > The problem I see here is we need to consider differences in PCIe > gens. Let's consider this example: gen3 x4 device which down the > chain goes over gen2 x8 pcie bridge. The device's bandwidth is > D=4*8*(gen3 encoding) and the bridge's bandwidth is B=8*5*(gen2 > encoding). D~=31.5 and B~=32. So it would seem like there's no > issue, but don't we want to know we actually went up as gen2? If you're saying the "bandwidth = width * speed" equation should be enhanced to consider the effect of encoding, I would agree with that. fm10k_slot_warn() has an example of doing that. I don't think we specifically care about whether it is gen2/gen3/etc. If a device with a narrow gen3 link can't keep a wide gen2 link upstream from it saturated, the device has nothing to complain about. > > I hinted at this before, but you thought it would result in more > > questions than answers [1], and I failed to continue the conversation. > > You raised the concern of not knowing the device limiting the total > bandwidth of the chain. I thought it was an argument against the > idea, but maybe I misunderstood. Let's agree on a design (below) > before I make anymore changes :). I was basically asking whether you wanted to know which device was the limiting factor. If we care about that, we could easily return it, but I don't see any drivers that care about it now. > > Let's continue it now :) > > > > Here are some straw-man interfaces to return a device's capabilities > > and the available bandwidth in MB/s: > > > > unsigned int pcie_bandwidth_capable(struct pci_dev *dev, > > enum pci_bus_speed *speed, > > enum pcie_link_width *width); > > unsigned int pcie_bandwidth_available(struct pci_dev *dev); > > > > Then we can compare the result with what "dev" is capable of, e.g., > > > > my_bw = pcie_bandwidth_capable(dev, &my_speed, &my_width); > > avail_bw = pcie_bandwidth_available(dev); > > if (avail_bw >= my_bw) > > Can it really be >? If pcie_bandwidth_available() looks at my device or the immediate upstream bridge (two ends of the last link), then no, the available bandwidth (based on current link settings) should never be greater than the bandwidth my device could support (based on link capabilities). > > pci_info(dev, "%d MB/s available bandwidth (%s x%d link)\n", > > my_bw, PCIE_SPEED2STR(my_speed), my_width); > > else > > pci_info(dev, "%d MB/s available bandwidth (capable of %d MB/s, %s x%d)\n", > > avail_bw, my_bw, PCIE_SPEED2STR(my_speed), my_width); > > > > Using GB/s would be nicer; I lazily used MB/s to avoid dealing with > > decimals, e.g., 2.5GB/s. > > So let's see if we agree on the steps: > 1. my_speed_cap, my_width_cap <- calculate device PCIe caps > 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth > 3. my_bw <- my_speed_cap * my_width_cap > 4. If avail_bw == my_bw print available bandwidth + PCIe caps > 5. Else print available bandwidth + limited by + capable bandwidth + PCIe > caps > > What do you think? Steps 2 and 3 might need to be smart enough to apply the effect of encoding differences between generations. In step 2, we don't have any current user of the "limiting_dev" information, so I'd omit it until we have somebody who wants it. In step 5, we don't know the "limited by" part (unless you want to add that).
> -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > Sent: Wednesday, March 21, 2018 12:48 PM > To: Tal Gilboa <talgi@mellanox.com> > Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- > pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E > <jacob.e.keller@intel.com> > Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log > > On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: > > On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > > > [+cc Jacob] > > > > > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > > > > Add pcie_print_link_status() function for querying and verifying > > > > a PCI device link status. The PCI speed and width are reported > > > > in kernel log. > > > > This provides a unified method for all PCI devices to > > > > report status and issues, instead of each device reporting in a > > > > different way, using different code. > > > > > > > > Signed-off-by: Tal Gilboa <talgi@mellanox.com> > > > > Reviewed-by: Tariq Toukan <tariqt@mellanox.com> > > > > --- > > > > drivers/pci/pci.c | 25 +++++++++++++++++++++++++ > > > > include/linux/pci.h | 1 + > > > > 2 files changed, 26 insertions(+) > > > > > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > > index 48b9fd6..ac876c4 100644 > > > > --- a/drivers/pci/pci.c > > > > +++ b/drivers/pci/pci.c > > > > @@ -5229,6 +5229,31 @@ int pcie_get_width_cap(struct pci_dev *dev, > enum pcie_link_width *width) > > > > EXPORT_SYMBOL(pcie_get_width_cap); > > > > /** > > > > + * pcie_print_link_status - Reports the PCI device's link speed and width. > > > > + * @dev: PCI device to query > > > > + * > > > > + * This function checks whether the PCI device current speed and width > are equal > > > > + * to the maximum PCI device capabilities. > > > > + */ > > > > +void pcie_print_link_status(struct pci_dev *dev) > > > > +{ > > > > + enum pcie_link_width width, width_cap; > > > > + enum pci_bus_speed speed, speed_cap; > > > > + > > > > + pcie_get_speed_cap(dev, &speed_cap); > > > > + pcie_get_width_cap(dev, &width_cap); > > > > + pcie_get_minimum_link(dev, &speed, &width); > > > > + > > > > + if (speed == speed_cap && width == width_cap) > > > > + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); > > > > + else > > > > + pci_info(dev, "%s x%d link (capable of %s x%d)\n", > > > > + PCIE_SPEED2STR(speed), width, > > > > + PCIE_SPEED2STR(speed_cap), width_cap); > > > > > > I think pcie_get_minimum_link() is misleading. This new use of > > > it is very similar to the existing uses, but I think we should clean > > > this up before using it in more places. > > > > > > pcie_get_minimum_link() finds the minimum speed and minimum link width > > > (separately) across all the links in the path, and I don't think > > > that's what we really want. What we *want* is the total bandwidth > > > available to the device, because we're trying to learn if the device > > > is capable of more than the fabric can deliver. > > > > > > That means we want to look at all the links in the path leading to the > > > device and find the link with the lowest bandwidth, i.e., width * > > > speed. Obviously this is not necessarily the link with the fewest > > > lanes or the lowest link speed. > > > > The problem I see here is we need to consider differences in PCIe > > gens. Let's consider this example: gen3 x4 device which down the > > chain goes over gen2 x8 pcie bridge. The device's bandwidth is > > D=4*8*(gen3 encoding) and the bridge's bandwidth is B=8*5*(gen2 > > encoding). D~=31.5 and B~=32. So it would seem like there's no > > issue, but don't we want to know we actually went up as gen2? > > If you're saying the "bandwidth = width * speed" equation should be > enhanced to consider the effect of encoding, I would agree with that. > fm10k_slot_warn() has an example of doing that. > > I don't think we specifically care about whether it is gen2/gen3/etc. > If a device with a narrow gen3 link can't keep a wide gen2 link > upstream from it saturated, the device has nothing to complain about. > > > > I hinted at this before, but you thought it would result in more > > > questions than answers [1], and I failed to continue the conversation. > > > > You raised the concern of not knowing the device limiting the total > > bandwidth of the chain. I thought it was an argument against the > > idea, but maybe I misunderstood. Let's agree on a design (below) > > before I make anymore changes :). > > I was basically asking whether you wanted to know which device was > the limiting factor. If we care about that, we could easily return > it, but I don't see any drivers that care about it now. > > > > Let's continue it now :) > > > > > > Here are some straw-man interfaces to return a device's capabilities > > > and the available bandwidth in MB/s: > > > > > > unsigned int pcie_bandwidth_capable(struct pci_dev *dev, > > > enum pci_bus_speed *speed, > > > enum pcie_link_width *width); > > > unsigned int pcie_bandwidth_available(struct pci_dev *dev); > > > > > > Then we can compare the result with what "dev" is capable of, e.g., > > > > > > my_bw = pcie_bandwidth_capable(dev, &my_speed, &my_width); > > > avail_bw = pcie_bandwidth_available(dev); > > > if (avail_bw >= my_bw) > > > > Can it really be >? > > If pcie_bandwidth_available() looks at my device or the immediate > upstream bridge (two ends of the last link), then no, the available > bandwidth (based on current link settings) should never be greater > than the bandwidth my device could support (based on link > capabilities). > > > > pci_info(dev, "%d MB/s available bandwidth (%s x%d link)\n", > > > my_bw, PCIE_SPEED2STR(my_speed), my_width); > > > else > > > pci_info(dev, "%d MB/s available bandwidth (capable of %d MB/s, %s > x%d)\n", > > > avail_bw, my_bw, PCIE_SPEED2STR(my_speed), my_width); > > > > > > Using GB/s would be nicer; I lazily used MB/s to avoid dealing with > > > decimals, e.g., 2.5GB/s. > > > > So let's see if we agree on the steps: > > 1. my_speed_cap, my_width_cap <- calculate device PCIe caps > > 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth > > 3. my_bw <- my_speed_cap * my_width_cap > > 4. If avail_bw == my_bw print available bandwidth + PCIe caps > > 5. Else print available bandwidth + limited by + capable bandwidth + PCIe > > caps > > > > What do you think? > > Steps 2 and 3 might need to be smart enough to apply the effect of > encoding differences between generations. > > In step 2, we don't have any current user of the "limiting_dev" > information, so I'd omit it until we have somebody who wants it. > > In step 5, we don't know the "limited by" part (unless you want to add > that). It might be useful to have the limited by information printed, even if no driver yet bothered to do it today. Thanks, Jake
On Wed, Mar 21, 2018 at 07:59:21PM +0000, Keller, Jacob E wrote: > > -----Original Message----- > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > Sent: Wednesday, March 21, 2018 12:48 PM > > To: Tal Gilboa <talgi@mellanox.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- > > pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E > > <jacob.e.keller@intel.com> > > Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log > > > > On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: > > > On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > > > > [+cc Jacob] > > > > > > > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > > > > > Add pcie_print_link_status() function for querying and verifying > > > > > a PCI device link status. The PCI speed and width are reported > > > > > in kernel log. > > > > > This provides a unified method for all PCI devices to > > > > > report status and issues, instead of each device reporting in a > > > > > different way, using different code. > > > So let's see if we agree on the steps: > > > 1. my_speed_cap, my_width_cap <- calculate device PCIe caps > > > 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth > > > 3. my_bw <- my_speed_cap * my_width_cap > > > 4. If avail_bw == my_bw print available bandwidth + PCIe caps > > > 5. Else print available bandwidth + limited by + capable bandwidth + PCIe > > > caps > > > > > > What do you think? > > > > Steps 2 and 3 might need to be smart enough to apply the effect of > > encoding differences between generations. > > > > In step 2, we don't have any current user of the "limiting_dev" > > information, so I'd omit it until we have somebody who wants it. > > > > In step 5, we don't know the "limited by" part (unless you want to add > > that). > > It might be useful to have the limited by information printed, even > if no driver yet bothered to do it today. I wouldn't object to printing that information (although it increases the challenge of making the message pithy), and it's basically free to collect it.
On 3/21/2018 10:10 PM, Bjorn Helgaas wrote: > On Wed, Mar 21, 2018 at 07:59:21PM +0000, Keller, Jacob E wrote: >>> -----Original Message----- >>> From: Bjorn Helgaas [mailto:helgaas@kernel.org] >>> Sent: Wednesday, March 21, 2018 12:48 PM >>> To: Tal Gilboa <talgi@mellanox.com> >>> Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- >>> pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E >>> <jacob.e.keller@intel.com> >>> Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log >>> >>> On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: >>>> On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: >>>>> [+cc Jacob] >>>>> >>>>> On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: >>>>>> Add pcie_print_link_status() function for querying and verifying >>>>>> a PCI device link status. The PCI speed and width are reported >>>>>> in kernel log. >>>>>> This provides a unified method for all PCI devices to >>>>>> report status and issues, instead of each device reporting in a >>>>>> different way, using different code. > >>>> So let's see if we agree on the steps: >>>> 1. my_speed_cap, my_width_cap <- calculate device PCIe caps >>>> 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth >>>> 3. my_bw <- my_speed_cap * my_width_cap >>>> 4. If avail_bw == my_bw print available bandwidth + PCIe caps >>>> 5. Else print available bandwidth + limited by + capable bandwidth + PCIe >>>> caps >>>> >>>> What do you think? >>> >>> Steps 2 and 3 might need to be smart enough to apply the effect of >>> encoding differences between generations. >>> >>> In step 2, we don't have any current user of the "limiting_dev" >>> information, so I'd omit it until we have somebody who wants it. >>> >>> In step 5, we don't know the "limited by" part (unless you want to add >>> that). >> >> It might be useful to have the limited by information printed, even >> if no driver yet bothered to do it today. > > I wouldn't object to printing that information (although it increases > the challenge of making the message pithy), and it's basically free to > collect it. > Coding done, currently under internal review. Will submit right after. I'm having some trouble printing the limiting device bus. Any recommendations on which format to use? dev->bus->name gives me the 6 first digits (e.g. "0000:07"). How do I get the last 3 (e.g. "00.0")? dev->bus->primary and dev->bus->number seem like good candidates but the actual values I get seem off.
On Tue, Mar 27, 2018 at 08:17:26PM +0300, Tal Gilboa wrote: > On 3/21/2018 10:10 PM, Bjorn Helgaas wrote: > > On Wed, Mar 21, 2018 at 07:59:21PM +0000, Keller, Jacob E wrote: > > > > -----Original Message----- > > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > > Sent: Wednesday, March 21, 2018 12:48 PM > > > > To: Tal Gilboa <talgi@mellanox.com> > > > > Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- > > > > pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E > > > > <jacob.e.keller@intel.com> > > > > Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log > > > > > > > > On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: > > > > > On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > > > > > > [+cc Jacob] > > > > > > > > > > > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > > > > > > > Add pcie_print_link_status() function for querying and verifying > > > > > > > a PCI device link status. The PCI speed and width are reported > > > > > > > in kernel log. > > > > > > > This provides a unified method for all PCI devices to > > > > > > > report status and issues, instead of each device reporting in a > > > > > > > different way, using different code. > > > > > > > So let's see if we agree on the steps: > > > > > 1. my_speed_cap, my_width_cap <- calculate device PCIe caps > > > > > 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth > > > > > 3. my_bw <- my_speed_cap * my_width_cap > > > > > 4. If avail_bw == my_bw print available bandwidth + PCIe caps > > > > > 5. Else print available bandwidth + limited by + capable bandwidth + PCIe > > > > > caps > > > > > > > > > > What do you think? > > > > > > > > Steps 2 and 3 might need to be smart enough to apply the effect of > > > > encoding differences between generations. > > > > > > > > In step 2, we don't have any current user of the "limiting_dev" > > > > information, so I'd omit it until we have somebody who wants it. > > > > > > > > In step 5, we don't know the "limited by" part (unless you want to add > > > > that). > > > > > > It might be useful to have the limited by information printed, even > > > if no driver yet bothered to do it today. > > > > I wouldn't object to printing that information (although it increases > > the challenge of making the message pithy), and it's basically free to > > collect it. > > > > Coding done, currently under internal review. Will submit right after. > I'm having some trouble printing the limiting device bus. Any > recommendations on which format to use? dev->bus->name gives me the 6 first > digits (e.g. "0000:07"). How do I get the last 3 (e.g. "00.0")? > dev->bus->primary and dev->bus->number seem like good candidates but the > actual values I get seem off. device_name(pdev) should be what you want. You should see two devices with the lowest bandwidth, i.e., the upstream and downstream ends of one link. I think it would make the most sense to print the upstream end. Bjorn
On Tue, Mar 27, 2018 at 12:28:42PM -0500, Bjorn Helgaas wrote: > On Tue, Mar 27, 2018 at 08:17:26PM +0300, Tal Gilboa wrote: > > On 3/21/2018 10:10 PM, Bjorn Helgaas wrote: > > > On Wed, Mar 21, 2018 at 07:59:21PM +0000, Keller, Jacob E wrote: > > > > > -----Original Message----- > > > > > From: Bjorn Helgaas [mailto:helgaas@kernel.org] > > > > > Sent: Wednesday, March 21, 2018 12:48 PM > > > > > To: Tal Gilboa <talgi@mellanox.com> > > > > > Cc: Bjorn Helgaas <bhelgaas@google.com>; Linux PCI <linux- > > > > > pci@vger.kernel.org>; Tariq Toukan <tariqt@mellanox.com>; Keller, Jacob E > > > > > <jacob.e.keller@intel.com> > > > > > Subject: Re: [PATCH next V3 3/5] PCI: Print PCI device link status in kernel log > > > > > > > > > > On Wed, Mar 21, 2018 at 09:43:48AM +0200, Tal Gilboa wrote: > > > > > > On 3/20/2018 4:05 PM, Bjorn Helgaas wrote: > > > > > > > [+cc Jacob] > > > > > > > > > > > > > > On Mon, Mar 12, 2018 at 02:06:08PM +0200, Tal Gilboa wrote: > > > > > > > > Add pcie_print_link_status() function for querying and verifying > > > > > > > > a PCI device link status. The PCI speed and width are reported > > > > > > > > in kernel log. > > > > > > > > This provides a unified method for all PCI devices to > > > > > > > > report status and issues, instead of each device reporting in a > > > > > > > > different way, using different code. > > > > > > > > > So let's see if we agree on the steps: > > > > > > 1. my_speed_cap, my_width_cap <- calculate device PCIe caps > > > > > > 2. avail_bw, limiting_dev <- calculate PCIe chain bandwidth > > > > > > 3. my_bw <- my_speed_cap * my_width_cap > > > > > > 4. If avail_bw == my_bw print available bandwidth + PCIe caps > > > > > > 5. Else print available bandwidth + limited by + capable bandwidth + PCIe > > > > > > caps > > > > > > > > > > > > What do you think? > > > > > > > > > > Steps 2 and 3 might need to be smart enough to apply the effect of > > > > > encoding differences between generations. > > > > > > > > > > In step 2, we don't have any current user of the "limiting_dev" > > > > > information, so I'd omit it until we have somebody who wants it. > > > > > > > > > > In step 5, we don't know the "limited by" part (unless you want to add > > > > > that). > > > > > > > > It might be useful to have the limited by information printed, even > > > > if no driver yet bothered to do it today. > > > > > > I wouldn't object to printing that information (although it increases > > > the challenge of making the message pithy), and it's basically free to > > > collect it. > > > > > > > Coding done, currently under internal review. Will submit right after. > > I'm having some trouble printing the limiting device bus. Any > > recommendations on which format to use? dev->bus->name gives me the 6 first > > digits (e.g. "0000:07"). How do I get the last 3 (e.g. "00.0")? > > dev->bus->primary and dev->bus->number seem like good candidates but the > > actual values I get seem off. > > device_name(pdev) should be what you want. You should see two devices > with the lowest bandwidth, i.e., the upstream and downstream ends of > one link. I think it would make the most sense to print the upstream > end. Sorry, it would help if I actually looked at the code first. pci_name(pdev), which calls dev_name(&pdev->dev), is what you want.
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 48b9fd6..ac876c4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5229,6 +5229,31 @@ int pcie_get_width_cap(struct pci_dev *dev, enum pcie_link_width *width) EXPORT_SYMBOL(pcie_get_width_cap); /** + * pcie_print_link_status - Reports the PCI device's link speed and width. + * @dev: PCI device to query + * + * This function checks whether the PCI device current speed and width are equal + * to the maximum PCI device capabilities. + */ +void pcie_print_link_status(struct pci_dev *dev) +{ + enum pcie_link_width width, width_cap; + enum pci_bus_speed speed, speed_cap; + + pcie_get_speed_cap(dev, &speed_cap); + pcie_get_width_cap(dev, &width_cap); + pcie_get_minimum_link(dev, &speed, &width); + + if (speed == speed_cap && width == width_cap) + pci_info(dev, "%s x%d link\n", PCIE_SPEED2STR(speed), width); + else + pci_info(dev, "%s x%d link (capable of %s x%d)\n", + PCIE_SPEED2STR(speed), width, + PCIE_SPEED2STR(speed_cap), width_cap); +} +EXPORT_SYMBOL(pcie_print_link_status); + +/** * pci_select_bars - Make BAR mask from the type of resource * @dev: the PCI device for which BAR mask is made * @flags: resource type mask to be selected diff --git a/include/linux/pci.h b/include/linux/pci.h index 8242d3d..4a20870 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1085,6 +1085,7 @@ int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed, enum pcie_link_width *width); int pcie_get_speed_cap(struct pci_dev *dev, enum pci_bus_speed *speed); int pcie_get_width_cap(struct pci_dev *dev, enum pcie_link_width *width); +void pcie_print_link_status(struct pci_dev *dev); int pcie_flr(struct pci_dev *dev); int __pci_reset_function_locked(struct pci_dev *dev); int pci_reset_function(struct pci_dev *dev);