| Message ID | 20180314144614.1632190-1-arnd@arndb.de |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | remove eight obsolete architectures | expand |
Arnd Bergmann <arnd@arndb.de> writes: > A lot of Kconfig symbols have architecture specific dependencies. > In those cases that depend on architectures we have already removed, > they can be omitted. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> [...] > drivers/net/wireless/cisco/Kconfig | 2 +- Acked-by: Kalle Valo <kvalo@codeaurora.org>
On 14/03/2018 at 15:43:46 +0100, Arnd Bergmann wrote: > A lot of Kconfig symbols have architecture specific dependencies. > In those cases that depend on architectures we have already removed, > they can be omitted. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > --- > block/bounce.c | 2 +- > drivers/ide/Kconfig | 2 +- > drivers/ide/ide-generic.c | 12 +----------- > drivers/input/joystick/analog.c | 2 +- > drivers/isdn/hisax/Kconfig | 10 +++++----- > drivers/net/ethernet/davicom/Kconfig | 2 +- > drivers/net/ethernet/smsc/Kconfig | 6 +++--- > drivers/net/wireless/cisco/Kconfig | 2 +- > drivers/pwm/Kconfig | 2 +- > drivers/rtc/Kconfig | 2 +- Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > drivers/spi/Kconfig | 4 ++-- > drivers/usb/musb/Kconfig | 2 +- > drivers/video/console/Kconfig | 3 +-- > drivers/watchdog/Kconfig | 6 ------ > drivers/watchdog/Makefile | 6 ------ > fs/Kconfig.binfmt | 5 ++--- > fs/minix/Kconfig | 2 +- > include/linux/ide.h | 7 +------ > init/Kconfig | 5 ++--- > lib/Kconfig.debug | 13 +++++-------- > lib/test_user_copy.c | 2 -- > mm/Kconfig | 7 ------- > mm/percpu.c | 4 ---- > 23 files changed, 31 insertions(+), 77 deletions(-) > > diff --git a/block/bounce.c b/block/bounce.c > index 6a3e68292273..dd0b93f2a871 100644 > --- a/block/bounce.c > +++ b/block/bounce.c > @@ -31,7 +31,7 @@ > static struct bio_set *bounce_bio_set, *bounce_bio_split; > static mempool_t *page_pool, *isa_page_pool; > > -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL) > +#if defined(CONFIG_HIGHMEM) > static __init int init_emergency_pool(void) > { > #if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG) > diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig > index cf1fb3fb5d26..901b8833847f 100644 > --- a/drivers/ide/Kconfig > +++ b/drivers/ide/Kconfig > @@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes" > > config IDE_GENERIC > tristate "generic/default IDE chipset support" > - depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC > + depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC > default ARM && ARCH_RPC > help > This is the generic IDE driver. This driver attaches to the > diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c > index 54d7c4685d23..80c0d69b83ac 100644 > --- a/drivers/ide/ide-generic.c > +++ b/drivers/ide/ide-generic.c > @@ -13,13 +13,10 @@ > #include <linux/ide.h> > #include <linux/pci_ids.h> > > -/* FIXME: convert arm and m32r to use ide_platform host driver */ > +/* FIXME: convert arm to use ide_platform host driver */ > #ifdef CONFIG_ARM > #include <asm/irq.h> > #endif > -#ifdef CONFIG_M32R > -#include <asm/m32r.h> > -#endif > > #define DRV_NAME "ide_generic" > > @@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = { > #ifdef CONFIG_ARM > static const u16 legacy_bases[] = { 0x1f0 }; > static const int legacy_irqs[] = { IRQ_HARDDISK }; > -#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \ > - defined(CONFIG_PLAT_OPSPUT) > -static const u16 legacy_bases[] = { 0x1f0 }; > -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ }; > -#elif defined(CONFIG_PLAT_MAPPI3) > -static const u16 legacy_bases[] = { 0x1f0, 0x170 }; > -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ }; > #elif defined(CONFIG_ALPHA) > static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 }; > static const int legacy_irqs[] = { 14, 15, 11, 10 }; > diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c > index be1b4921f22a..eefac7978f93 100644 > --- a/drivers/input/joystick/analog.c > +++ b/drivers/input/joystick/analog.c > @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void) > #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0) > #define DELTA(x,y) ((y)-(x)) > #define TIME_NAME "TSC" > -#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) > +#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) > #define GET_TIME(x) do { x = get_cycles(); } while (0) > #define DELTA(x,y) ((y)-(x)) > #define TIME_NAME "get_cycles" > diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig > index eb83d94ab4fe..38cfc8baae19 100644 > --- a/drivers/isdn/hisax/Kconfig > +++ b/drivers/isdn/hisax/Kconfig > @@ -109,7 +109,7 @@ config HISAX_16_3 > > config HISAX_TELESPCI > bool "Teles PCI" > - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) > + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) > help > This enables HiSax support for the Teles PCI. > See <file:Documentation/isdn/README.HiSax> on how to configure it. > @@ -237,7 +237,7 @@ config HISAX_MIC > > config HISAX_NETJET > bool "NETjet card" > - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) > + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) > depends on VIRT_TO_BUS > help > This enables HiSax support for the NetJet from Traverse > @@ -249,7 +249,7 @@ config HISAX_NETJET > > config HISAX_NETJET_U > bool "NETspider U card" > - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) > + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) > depends on VIRT_TO_BUS > help > This enables HiSax support for the Netspider U interface ISDN card > @@ -318,7 +318,7 @@ config HISAX_GAZEL > > config HISAX_HFC_PCI > bool "HFC PCI-Bus cards" > - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) > + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) > help > This enables HiSax support for the HFC-S PCI 2BDS0 based cards. > > @@ -343,7 +343,7 @@ config HISAX_HFC_SX > > config HISAX_ENTERNOW_PCI > bool "Formula-n enter:now PCI card" > - depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) > + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) > help > This enables HiSax support for the Formula-n enter:now PCI > ISDN card. > diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig > index 7ec2d74f94d3..680a6d983f37 100644 > --- a/drivers/net/ethernet/davicom/Kconfig > +++ b/drivers/net/ethernet/davicom/Kconfig > @@ -4,7 +4,7 @@ > > config DM9000 > tristate "DM9000 support" > - depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2 > + depends on ARM || MIPS || COLDFIRE || NIOS2 > select CRC32 > select MII > ---help--- > diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig > index 948603e9b905..3da0c573d2ab 100644 > --- a/drivers/net/ethernet/smsc/Kconfig > +++ b/drivers/net/ethernet/smsc/Kconfig > @@ -5,8 +5,8 @@ > config NET_VENDOR_SMSC > bool "SMC (SMSC)/Western Digital devices" > default y > - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ > - ISA || M32R || MAC || MIPS || NIOS2 || PCI || \ > + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ > + ISA || MAC || MIPS || NIOS2 || PCI || \ > PCMCIA || SUPERH || XTENSA || H8300 > ---help--- > If you have a network (Ethernet) card belonging to this class, say Y. > @@ -37,7 +37,7 @@ config SMC91X > select CRC32 > select MII > depends on !OF || GPIOLIB > - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ > + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ > M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300 > ---help--- > This is a driver for SMC's 91x series of Ethernet chipsets, > diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig > index b22567dff893..8ed0b154bb33 100644 > --- a/drivers/net/wireless/cisco/Kconfig > +++ b/drivers/net/wireless/cisco/Kconfig > @@ -33,7 +33,7 @@ config AIRO > > config AIRO_CS > tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" > - depends on CFG80211 && PCMCIA && (BROKEN || !M32R) > + depends on CFG80211 && PCMCIA > select WIRELESS_EXT > select WEXT_SPY > select WEXT_PRIV > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig > index 763ee50ea57d..f16aad3bf5d6 100644 > --- a/drivers/pwm/Kconfig > +++ b/drivers/pwm/Kconfig > @@ -43,7 +43,7 @@ config PWM_AB8500 > > config PWM_ATMEL > tristate "Atmel PWM support" > - depends on ARCH_AT91 || AVR32 > + depends on ARCH_AT91 > help > Generic PWM framework driver for Atmel SoC. > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > index be5a3dc99c11..46af10ac45fc 100644 > --- a/drivers/rtc/Kconfig > +++ b/drivers/rtc/Kconfig > @@ -868,7 +868,7 @@ comment "Platform RTC drivers" > > config RTC_DRV_CMOS > tristate "PC-style 'CMOS'" > - depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 > + depends on X86 || ARM || PPC || MIPS || SPARC64 > default y if X86 > select RTC_MC146818_LIB > help > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index 603783976b81..103c13fcefa0 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -72,10 +72,10 @@ config SPI_ARMADA_3700 > config SPI_ATMEL > tristate "Atmel SPI Controller" > depends on HAS_DMA > - depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) > + depends on ARCH_AT91 || COMPILE_TEST > help > This selects a driver for the Atmel SPI Controller, present on > - many AT32 (AVR32) and AT91 (ARM) chips. > + many AT91 ARM chips. > > config SPI_AU1550 > tristate "Au1550/Au1200/Au1300 SPI Controller" > diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig > index 5506a9c03c1f..e757afc1cfd0 100644 > --- a/drivers/usb/musb/Kconfig > +++ b/drivers/usb/musb/Kconfig > @@ -87,7 +87,7 @@ config USB_MUSB_DA8XX > config USB_MUSB_TUSB6010 > tristate "TUSB6010" > depends on HAS_IOMEM > - depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules > > config USB_MUSB_OMAP2PLUS > diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig > index 005ed87c8216..a9e398c144f8 100644 > --- a/drivers/video/console/Kconfig > +++ b/drivers/video/console/Kconfig > @@ -6,8 +6,7 @@ menu "Console display driver support" > > config VGA_CONSOLE > bool "VGA text console" if EXPERT || !X86 > - depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \ > - !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \ > + depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \ > (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ > !ARM64 && !ARC && !MICROBLAZE && !OPENRISC > default y > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 0e19679348d1..79020ce95de2 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -828,10 +828,6 @@ config BFIN_WDT > To compile this driver as a module, choose M here: the > module will be called bfin_wdt. > > -# CRIS Architecture > - > -# FRV Architecture > - > # X86 (i386 + ia64 + x86_64) Architecture > > config ACQUIRE_WDT > @@ -1431,8 +1427,6 @@ config NIC7018_WDT > To compile this driver as a module, choose M here: the module will be > called nic7018_wdt. > > -# M32R Architecture > - > # M68K Architecture > > config M54xx_WATCHDOG > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 0474d38aa854..1f9a0235f22c 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o > # BLACKFIN Architecture > obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o > > -# CRIS Architecture > - > -# FRV Architecture > - > # X86 (i386 + ia64 + x86_64) Architecture > obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o > obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o > @@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o > obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o > obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o > > -# M32R Architecture > - > # M68K Architecture > obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o > > diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt > index 58c2bbd385ad..57a27c42b5ac 100644 > --- a/fs/Kconfig.binfmt > +++ b/fs/Kconfig.binfmt > @@ -1,6 +1,6 @@ > config BINFMT_ELF > bool "Kernel support for ELF binaries" > - depends on MMU && (BROKEN || !FRV) > + depends on MMU > select ELFCORE > default y > ---help--- > @@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE > config BINFMT_ELF_FDPIC > bool "Kernel support for FDPIC ELF binaries" > default y if !BINFMT_ELF > - depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X) > + depends on (ARM || (SUPERH32 && !MMU) || C6X) > select ELFCORE > help > ELF FDPIC binaries are based on ELF, but allow the individual load > @@ -90,7 +90,6 @@ config BINFMT_SCRIPT > config BINFMT_FLAT > bool "Kernel support for flat binaries" > depends on !MMU || ARM || M68K > - depends on !FRV || BROKEN > help > Support uClinux FLAT format binaries. > > diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig > index f2a0cfcef11d..bcd53a79156f 100644 > --- a/fs/minix/Kconfig > +++ b/fs/minix/Kconfig > @@ -18,7 +18,7 @@ config MINIX_FS > > config MINIX_FS_NATIVE_ENDIAN > def_bool MINIX_FS > - depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) > + depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) > > config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED > def_bool MINIX_FS > diff --git a/include/linux/ide.h b/include/linux/ide.h > index 20d42c0d9fb6..1d6f16110eae 100644 > --- a/include/linux/ide.h > +++ b/include/linux/ide.h > @@ -25,15 +25,10 @@ > #include <asm/byteorder.h> > #include <asm/io.h> > > -#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) > -# define SUPPORT_VLB_SYNC 0 > -#else > -# define SUPPORT_VLB_SYNC 1 > -#endif > - > /* > * Probably not wise to fiddle with these > */ > +#define SUPPORT_VLB_SYNC 1 > #define IDE_DEFAULT_MAX_FAILURES 1 > #define ERROR_MAX 8 /* Max read/write errors per sector */ > #define ERROR_RESET 3 /* Reset controller every 4th retry */ > diff --git a/init/Kconfig b/init/Kconfig > index a14bcc9724a2..2852692d7c9c 100644 > --- a/init/Kconfig > +++ b/init/Kconfig > @@ -998,7 +998,6 @@ config RELAY > > config BLK_DEV_INITRD > bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" > - depends on BROKEN || !FRV > help > The initial RAM filesystem is a ramfs which is loaded by the > boot loader (loadlin or lilo) and that is mounted as root > @@ -1108,7 +1107,7 @@ config MULTIUSER > > config SGETMASK_SYSCALL > bool "sgetmask/ssetmask syscalls support" if EXPERT > - def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH > + def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH > ---help--- > sys_sgetmask and sys_ssetmask are obsolete system calls > no longer supported in libc but still enabled by default in some > @@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU > config KALLSYMS_BASE_RELATIVE > bool > depends on KALLSYMS > - default !IA64 && !(TILE && 64BIT) > + default !IA64 > help > Instead of emitting them as absolute values in the native word size, > emit the symbol references in the kallsyms table as 32-bit entries, > diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug > index 41ac9d294245..6927c6d8d185 100644 > --- a/lib/Kconfig.debug > +++ b/lib/Kconfig.debug > @@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED > > config DEBUG_INFO_SPLIT > bool "Produce split debuginfo in .dwo files" > - depends on DEBUG_INFO && !FRV > + depends on DEBUG_INFO > help > Generate debug info into separate .dwo files. This significantly > reduces the build directory size for builds with DEBUG_INFO, > @@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS > > config FRAME_POINTER > bool "Compile the kernel with frame pointers" > - depends on DEBUG_KERNEL && \ > - (CRIS || M68K || FRV || UML || \ > - SUPERH || BLACKFIN) || \ > - ARCH_WANT_FRAME_POINTERS > + depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS > default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS > help > If you say Y here the resulting kernel image will be slightly > @@ -1138,7 +1135,7 @@ config LOCKDEP > bool > depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT > select STACKTRACE > - select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86 > + select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86 > select KALLSYMS > select KALLSYMS_ALL > > @@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER > depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT > depends on !X86_64 > select STACKTRACE > - select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86 > + select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86 > help > Provide stacktrace filter for fault-injection capabilities > > @@ -1969,7 +1966,7 @@ config STRICT_DEVMEM > bool "Filter access to /dev/mem" > depends on MMU && DEVMEM > depends on ARCH_HAS_DEVMEM_IS_ALLOWED > - default y if TILE || PPC || X86 || ARM64 > + default y if PPC || X86 || ARM64 > ---help--- > If this option is disabled, you allow userspace (root) access to all > of memory, including kernel and userspace memory. Accidental > diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c > index a6556f3364d1..e161f0498f42 100644 > --- a/lib/test_user_copy.c > +++ b/lib/test_user_copy.c > @@ -31,8 +31,6 @@ > * their capability at compile-time, we just have to opt-out certain archs. > */ > #if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \ > - !defined(CONFIG_BLACKFIN) && \ > - !defined(CONFIG_M32R) && \ > !defined(CONFIG_M68K) && \ > !defined(CONFIG_MICROBLAZE) && \ > !defined(CONFIG_NIOS2) && \ > diff --git a/mm/Kconfig b/mm/Kconfig > index abefa573bcd8..d5004d82a1d6 100644 > --- a/mm/Kconfig > +++ b/mm/Kconfig > @@ -278,13 +278,6 @@ config BOUNCE > by default when ZONE_DMA or HIGHMEM is selected, but you > may say n to override this. > > -# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often > -# have more than 4GB of memory, but we don't currently use the IOTLB to present > -# a 32-bit address to OHCI. So we need to use a bounce pool instead. > -config NEED_BOUNCE_POOL > - bool > - default y if TILE && USB_OHCI_HCD > - > config NR_QUICK > int > depends on QUICKLIST > diff --git a/mm/percpu.c b/mm/percpu.c > index 50e7fdf84055..79e3549cab0f 100644 > --- a/mm/percpu.c > +++ b/mm/percpu.c > @@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void) > > if (pcpu_setup_first_chunk(ai, fc) < 0) > panic("Failed to initialize percpu areas."); > -#ifdef CONFIG_CRIS > -#warning "the CRIS architecture has physical and virtual addresses confused" > -#else > pcpu_free_alloc_info(ai); > -#endif > } > > #endif /* CONFIG_SMP */ > -- > 2.9.0 >
diff --git a/block/bounce.c b/block/bounce.c index 6a3e68292273..dd0b93f2a871 100644 --- a/block/bounce.c +++ b/block/bounce.c @@ -31,7 +31,7 @@ static struct bio_set *bounce_bio_set, *bounce_bio_split; static mempool_t *page_pool, *isa_page_pool; -#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL) +#if defined(CONFIG_HIGHMEM) static __init int init_emergency_pool(void) { #if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf1fb3fb5d26..901b8833847f 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" - depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC + depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC default ARM && ARCH_RPC help This is the generic IDE driver. This driver attaches to the diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 54d7c4685d23..80c0d69b83ac 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -13,13 +13,10 @@ #include <linux/ide.h> #include <linux/pci_ids.h> -/* FIXME: convert arm and m32r to use ide_platform host driver */ +/* FIXME: convert arm to use ide_platform host driver */ #ifdef CONFIG_ARM #include <asm/irq.h> #endif -#ifdef CONFIG_M32R -#include <asm/m32r.h> -#endif #define DRV_NAME "ide_generic" @@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = { #ifdef CONFIG_ARM static const u16 legacy_bases[] = { 0x1f0 }; static const int legacy_irqs[] = { IRQ_HARDDISK }; -#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \ - defined(CONFIG_PLAT_OPSPUT) -static const u16 legacy_bases[] = { 0x1f0 }; -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ }; -#elif defined(CONFIG_PLAT_MAPPI3) -static const u16 legacy_bases[] = { 0x1f0, 0x170 }; -static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ }; #elif defined(CONFIG_ALPHA) static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 }; static const int legacy_irqs[] = { 14, 15, 11, 10 }; diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index be1b4921f22a..eefac7978f93 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -163,7 +163,7 @@ static unsigned int get_time_pit(void) #define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "TSC" -#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE) +#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) #define GET_TIME(x) do { x = get_cycles(); } while (0) #define DELTA(x,y) ((y)-(x)) #define TIME_NAME "get_cycles" diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index eb83d94ab4fe..38cfc8baae19 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -109,7 +109,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Teles PCI. See <file:Documentation/isdn/README.HiSax> on how to configure it. @@ -237,7 +237,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) depends on VIRT_TO_BUS help This enables HiSax support for the NetJet from Traverse @@ -249,7 +249,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) + depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE)) depends on VIRT_TO_BUS help This enables HiSax support for the Netspider U interface ISDN card @@ -318,7 +318,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -343,7 +343,7 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN))) + depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig index 7ec2d74f94d3..680a6d983f37 100644 --- a/drivers/net/ethernet/davicom/Kconfig +++ b/drivers/net/ethernet/davicom/Kconfig @@ -4,7 +4,7 @@ config DM9000 tristate "DM9000 support" - depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2 + depends on ARM || MIPS || COLDFIRE || NIOS2 select CRC32 select MII ---help--- diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 948603e9b905..3da0c573d2ab 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -5,8 +5,8 @@ config NET_VENDOR_SMSC bool "SMC (SMSC)/Western Digital devices" default y - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ - ISA || M32R || MAC || MIPS || NIOS2 || PCI || \ + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ + ISA || MAC || MIPS || NIOS2 || PCI || \ PCMCIA || SUPERH || XTENSA || H8300 ---help--- If you have a network (Ethernet) card belonging to this class, say Y. @@ -37,7 +37,7 @@ config SMC91X select CRC32 select MII depends on !OF || GPIOLIB - depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \ + depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \ M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300 ---help--- This is a driver for SMC's 91x series of Ethernet chipsets, diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig index b22567dff893..8ed0b154bb33 100644 --- a/drivers/net/wireless/cisco/Kconfig +++ b/drivers/net/wireless/cisco/Kconfig @@ -33,7 +33,7 @@ config AIRO config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on CFG80211 && PCMCIA && (BROKEN || !M32R) + depends on CFG80211 && PCMCIA select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 763ee50ea57d..f16aad3bf5d6 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -43,7 +43,7 @@ config PWM_AB8500 config PWM_ATMEL tristate "Atmel PWM support" - depends on ARCH_AT91 || AVR32 + depends on ARCH_AT91 help Generic PWM framework driver for Atmel SoC. diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index be5a3dc99c11..46af10ac45fc 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -868,7 +868,7 @@ comment "Platform RTC drivers" config RTC_DRV_CMOS tristate "PC-style 'CMOS'" - depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 + depends on X86 || ARM || PPC || MIPS || SPARC64 default y if X86 select RTC_MC146818_LIB help diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 603783976b81..103c13fcefa0 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -72,10 +72,10 @@ config SPI_ARMADA_3700 config SPI_ATMEL tristate "Atmel SPI Controller" depends on HAS_DMA - depends on (ARCH_AT91 || AVR32 || COMPILE_TEST) + depends on ARCH_AT91 || COMPILE_TEST help This selects a driver for the Atmel SPI Controller, present on - many AT32 (AVR32) and AT91 (ARM) chips. + many AT91 ARM chips. config SPI_AU1550 tristate "Au1550/Au1200/Au1300 SPI Controller" diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5506a9c03c1f..e757afc1cfd0 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -87,7 +87,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" depends on HAS_IOMEM - depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN + depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 005ed87c8216..a9e398c144f8 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,8 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EXPERT || !X86 - depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \ - !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \ + depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \ (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ !ARM64 && !ARC && !MICROBLAZE && !OPENRISC default y diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0e19679348d1..79020ce95de2 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -828,10 +828,6 @@ config BFIN_WDT To compile this driver as a module, choose M here: the module will be called bfin_wdt. -# CRIS Architecture - -# FRV Architecture - # X86 (i386 + ia64 + x86_64) Architecture config ACQUIRE_WDT @@ -1431,8 +1427,6 @@ config NIC7018_WDT To compile this driver as a module, choose M here: the module will be called nic7018_wdt. -# M32R Architecture - # M68K Architecture config M54xx_WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 0474d38aa854..1f9a0235f22c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o # BLACKFIN Architecture obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o -# CRIS Architecture - -# FRV Architecture - # X86 (i386 + ia64 + x86_64) Architecture obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o @@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o -# M32R Architecture - # M68K Architecture obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 58c2bbd385ad..57a27c42b5ac 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -1,6 +1,6 @@ config BINFMT_ELF bool "Kernel support for ELF binaries" - depends on MMU && (BROKEN || !FRV) + depends on MMU select ELFCORE default y ---help--- @@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y if !BINFMT_ELF - depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X) + depends on (ARM || (SUPERH32 && !MMU) || C6X) select ELFCORE help ELF FDPIC binaries are based on ELF, but allow the individual load @@ -90,7 +90,6 @@ config BINFMT_SCRIPT config BINFMT_FLAT bool "Kernel support for flat binaries" depends on !MMU || ARM || M68K - depends on !FRV || BROKEN help Support uClinux FLAT format binaries. diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig index f2a0cfcef11d..bcd53a79156f 100644 --- a/fs/minix/Kconfig +++ b/fs/minix/Kconfig @@ -18,7 +18,7 @@ config MINIX_FS config MINIX_FS_NATIVE_ENDIAN def_bool MINIX_FS - depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) + depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU) config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED def_bool MINIX_FS diff --git a/include/linux/ide.h b/include/linux/ide.h index 20d42c0d9fb6..1d6f16110eae 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -25,15 +25,10 @@ #include <asm/byteorder.h> #include <asm/io.h> -#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) -# define SUPPORT_VLB_SYNC 0 -#else -# define SUPPORT_VLB_SYNC 1 -#endif - /* * Probably not wise to fiddle with these */ +#define SUPPORT_VLB_SYNC 1 #define IDE_DEFAULT_MAX_FAILURES 1 #define ERROR_MAX 8 /* Max read/write errors per sector */ #define ERROR_RESET 3 /* Reset controller every 4th retry */ diff --git a/init/Kconfig b/init/Kconfig index a14bcc9724a2..2852692d7c9c 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -998,7 +998,6 @@ config RELAY config BLK_DEV_INITRD bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" - depends on BROKEN || !FRV help The initial RAM filesystem is a ramfs which is loaded by the boot loader (loadlin or lilo) and that is mounted as root @@ -1108,7 +1107,7 @@ config MULTIUSER config SGETMASK_SYSCALL bool "sgetmask/ssetmask syscalls support" if EXPERT - def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH + def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH ---help--- sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc but still enabled by default in some @@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU config KALLSYMS_BASE_RELATIVE bool depends on KALLSYMS - default !IA64 && !(TILE && 64BIT) + default !IA64 help Instead of emitting them as absolute values in the native word size, emit the symbol references in the kallsyms table as 32-bit entries, diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 41ac9d294245..6927c6d8d185 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED config DEBUG_INFO_SPLIT bool "Produce split debuginfo in .dwo files" - depends on DEBUG_INFO && !FRV + depends on DEBUG_INFO help Generate debug info into separate .dwo files. This significantly reduces the build directory size for builds with DEBUG_INFO, @@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS config FRAME_POINTER bool "Compile the kernel with frame pointers" - depends on DEBUG_KERNEL && \ - (CRIS || M68K || FRV || UML || \ - SUPERH || BLACKFIN) || \ - ARCH_WANT_FRAME_POINTERS + depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS help If you say Y here the resulting kernel image will be slightly @@ -1138,7 +1135,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86 + select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86 select KALLSYMS select KALLSYMS_ALL @@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86 + select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86 help Provide stacktrace filter for fault-injection capabilities @@ -1969,7 +1966,7 @@ config STRICT_DEVMEM bool "Filter access to /dev/mem" depends on MMU && DEVMEM depends on ARCH_HAS_DEVMEM_IS_ALLOWED - default y if TILE || PPC || X86 || ARM64 + default y if PPC || X86 || ARM64 ---help--- If this option is disabled, you allow userspace (root) access to all of memory, including kernel and userspace memory. Accidental diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c index a6556f3364d1..e161f0498f42 100644 --- a/lib/test_user_copy.c +++ b/lib/test_user_copy.c @@ -31,8 +31,6 @@ * their capability at compile-time, we just have to opt-out certain archs. */ #if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \ - !defined(CONFIG_BLACKFIN) && \ - !defined(CONFIG_M32R) && \ !defined(CONFIG_M68K) && \ !defined(CONFIG_MICROBLAZE) && \ !defined(CONFIG_NIOS2) && \ diff --git a/mm/Kconfig b/mm/Kconfig index abefa573bcd8..d5004d82a1d6 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -278,13 +278,6 @@ config BOUNCE by default when ZONE_DMA or HIGHMEM is selected, but you may say n to override this. -# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often -# have more than 4GB of memory, but we don't currently use the IOTLB to present -# a 32-bit address to OHCI. So we need to use a bounce pool instead. -config NEED_BOUNCE_POOL - bool - default y if TILE && USB_OHCI_HCD - config NR_QUICK int depends on QUICKLIST diff --git a/mm/percpu.c b/mm/percpu.c index 50e7fdf84055..79e3549cab0f 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void) if (pcpu_setup_first_chunk(ai, fc) < 0) panic("Failed to initialize percpu areas."); -#ifdef CONFIG_CRIS -#warning "the CRIS architecture has physical and virtual addresses confused" -#else pcpu_free_alloc_info(ai); -#endif } #endif /* CONFIG_SMP */
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- block/bounce.c | 2 +- drivers/ide/Kconfig | 2 +- drivers/ide/ide-generic.c | 12 +----------- drivers/input/joystick/analog.c | 2 +- drivers/isdn/hisax/Kconfig | 10 +++++----- drivers/net/ethernet/davicom/Kconfig | 2 +- drivers/net/ethernet/smsc/Kconfig | 6 +++--- drivers/net/wireless/cisco/Kconfig | 2 +- drivers/pwm/Kconfig | 2 +- drivers/rtc/Kconfig | 2 +- drivers/spi/Kconfig | 4 ++-- drivers/usb/musb/Kconfig | 2 +- drivers/video/console/Kconfig | 3 +-- drivers/watchdog/Kconfig | 6 ------ drivers/watchdog/Makefile | 6 ------ fs/Kconfig.binfmt | 5 ++--- fs/minix/Kconfig | 2 +- include/linux/ide.h | 7 +------ init/Kconfig | 5 ++--- lib/Kconfig.debug | 13 +++++-------- lib/test_user_copy.c | 2 -- mm/Kconfig | 7 ------- mm/percpu.c | 4 ---- 23 files changed, 31 insertions(+), 77 deletions(-)