Message ID | 20180217063135.21550-1-haozhong.zhang@intel.com |
---|---|
State | New |
Headers | show |
Series | hw/acpi-build: build SRAT memory affinity structures for NVDIMM | expand |
On Sat, 17 Feb 2018 14:31:35 +0800 Haozhong Zhang <haozhong.zhang@intel.com> wrote: > ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > domain of a NVDIMM SPA range must match with corresponding entry in > SRAT table. > > The address ranges of vNVDIMM in QEMU are allocated from the > hot-pluggable address space, which is entirely covered by one SRAT > memory affinity structure. However, users can set the vNVDIMM > proximity domain in NFIT SPA range structure by the 'node' property of > '-device nvdimm' to a value different than the one in the above SRAT > memory affinity structure. > > In order to solve such proximity domain mismatch, this patch build one > SRAT memory affinity structure for each NVDIMM device with the > proximity domain used in NFIT. The remaining hot-pluggable address > space is covered by one or multiple SRAT memory affinity structures > with the proximity domain of the last node as before. > > Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> If we consider hotpluggable system, correctly implemented OS should be able pull proximity from Device::_PXM and override any value from SRAT. Do we really have a problem here (anything that breaks if we would use _PXM)? Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? Beside of above policy decision, patch looks good. If we decide that it's a way to go (it shouldn't hurt, patch just adds more code to maintain), I'd like to see tests added to tests/numa-test.c along with it to ensure that it works as expected. > --- > hw/acpi/nvdimm.c | 15 +++++++++++++-- > hw/i386/acpi-build.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- > include/hw/mem/nvdimm.h | 11 +++++++++++ > 3 files changed, 67 insertions(+), 6 deletions(-) > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > index 59d6e4254c..dff0818e77 100644 > --- a/hw/acpi/nvdimm.c > +++ b/hw/acpi/nvdimm.c > @@ -33,12 +33,23 @@ > #include "hw/nvram/fw_cfg.h" > #include "hw/mem/nvdimm.h" > > +static gint nvdimm_addr_sort(gconstpointer a, gconstpointer b) > +{ > + uint64_t addr0 = object_property_get_uint(OBJECT(NVDIMM(a)), > + PC_DIMM_ADDR_PROP, NULL); > + uint64_t addr1 = object_property_get_uint(OBJECT(NVDIMM(b)), > + PC_DIMM_ADDR_PROP, NULL); > + > + return addr0 < addr1 ? -1 : > + addr0 > addr1 ? 1 : 0; > +} > + > static int nvdimm_device_list(Object *obj, void *opaque) > { > GSList **list = opaque; > > if (object_dynamic_cast(obj, TYPE_NVDIMM)) { > - *list = g_slist_append(*list, DEVICE(obj)); > + *list = g_slist_insert_sorted(*list, DEVICE(obj), nvdimm_addr_sort); > } > > object_child_foreach(obj, nvdimm_device_list, opaque); > @@ -52,7 +63,7 @@ static int nvdimm_device_list(Object *obj, void *opaque) > * Note: it is the caller's responsibility to free the list to avoid > * memory leak. > */ > -static GSList *nvdimm_get_device_list(void) > +GSList *nvdimm_get_device_list(void) > { > GSList *list = NULL; > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index deb440f286..637ac3a8f0 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -2323,6 +2323,46 @@ build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog) > #define HOLE_640K_START (640 * 1024) > #define HOLE_640K_END (1024 * 1024) > > +static void build_srat_hotpluggable_memory(GArray *table_data, uint64_t base, > + uint64_t len, int default_node) > +{ > + GSList *nvdimms = nvdimm_get_device_list(); > + GSList *ent = nvdimms; > + NVDIMMDevice *dev; > + uint64_t end = base + len, addr, size; > + int node; > + AcpiSratMemoryAffinity *numamem; > + > + while (base < end) { > + numamem = acpi_data_push(table_data, sizeof *numamem); > + > + if (!ent) { > + build_srat_memory(numamem, base, end - base, default_node, > + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); > + break; > + } > + > + dev = NVDIMM(ent->data); > + addr = object_property_get_uint(OBJECT(dev), PC_DIMM_ADDR_PROP, NULL); > + size = object_property_get_uint(OBJECT(dev), PC_DIMM_SIZE_PROP, NULL); > + node = object_property_get_uint(OBJECT(dev), PC_DIMM_NODE_PROP, NULL); > + > + if (base < addr) { > + build_srat_memory(numamem, base, addr - base, default_node, > + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); > + numamem = acpi_data_push(table_data, sizeof *numamem); > + } > + build_srat_memory(numamem, addr, size, node, > + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED | > + MEM_AFFINITY_NON_VOLATILE); > + > + base = addr + size; > + ent = ent->next; > + } > + > + g_slist_free(nvdimms); > +} > + > static void > build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) > { > @@ -2434,10 +2474,9 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) > * providing _PXM method if necessary. > */ > if (hotplugabble_address_space_size) { > - numamem = acpi_data_push(table_data, sizeof *numamem); > - build_srat_memory(numamem, pcms->hotplug_memory.base, > - hotplugabble_address_space_size, pcms->numa_nodes - 1, > - MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); > + build_srat_hotpluggable_memory(table_data, pcms->hotplug_memory.base, > + hotplugabble_address_space_size, > + pcms->numa_nodes - 1); > } > > build_header(linker, table_data, > diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h > index 7fd87c4e1c..ca9d6aa714 100644 > --- a/include/hw/mem/nvdimm.h > +++ b/include/hw/mem/nvdimm.h > @@ -144,4 +144,15 @@ void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data, > uint32_t ram_slots); > void nvdimm_plug(AcpiNVDIMMState *state); > void nvdimm_acpi_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev); > + > +/* > + * Inquire NVDIMM devices and link them into the list which is > + * returned to the caller and sorted in the ascending order of the > + * base address of NVDIMM devices. > + * > + * Note: it is the caller's responsibility to free the list to avoid > + * memory leak. > + */ > +GSList *nvdimm_get_device_list(void); > + > #endif
On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > On Sat, 17 Feb 2018 14:31:35 +0800 > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity >> domain of a NVDIMM SPA range must match with corresponding entry in >> SRAT table. >> >> The address ranges of vNVDIMM in QEMU are allocated from the >> hot-pluggable address space, which is entirely covered by one SRAT >> memory affinity structure. However, users can set the vNVDIMM >> proximity domain in NFIT SPA range structure by the 'node' property of >> '-device nvdimm' to a value different than the one in the above SRAT >> memory affinity structure. >> >> In order to solve such proximity domain mismatch, this patch build one >> SRAT memory affinity structure for each NVDIMM device with the >> proximity domain used in NFIT. The remaining hot-pluggable address >> space is covered by one or multiple SRAT memory affinity structures >> with the proximity domain of the last node as before. >> >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > If we consider hotpluggable system, correctly implemented OS should > be able pull proximity from Device::_PXM and override any value from SRAT. > Do we really have a problem here (anything that breaks if we would use _PXM)? > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? Unfortunately _PXM is an awkward fit. Currently the proximity domain is attached to the SPA range structure. The SPA range may be associated with multiple DIMM devices and those individual NVDIMMs may have conflicting _PXM properties. Even if that was unified across DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the device's control interface, or the assembled persistent memory SPA range.
On Tue, 20 Feb 2018 17:17:58 -0800 Dan Williams <dan.j.williams@intel.com> wrote: > On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > > On Sat, 17 Feb 2018 14:31:35 +0800 > > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > > > >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > >> domain of a NVDIMM SPA range must match with corresponding entry in > >> SRAT table. > >> > >> The address ranges of vNVDIMM in QEMU are allocated from the > >> hot-pluggable address space, which is entirely covered by one SRAT > >> memory affinity structure. However, users can set the vNVDIMM > >> proximity domain in NFIT SPA range structure by the 'node' property of > >> '-device nvdimm' to a value different than the one in the above SRAT > >> memory affinity structure. > >> > >> In order to solve such proximity domain mismatch, this patch build one > >> SRAT memory affinity structure for each NVDIMM device with the > >> proximity domain used in NFIT. The remaining hot-pluggable address > >> space is covered by one or multiple SRAT memory affinity structures > >> with the proximity domain of the last node as before. > >> > >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > > If we consider hotpluggable system, correctly implemented OS should > > be able pull proximity from Device::_PXM and override any value from SRAT. > > Do we really have a problem here (anything that breaks if we would use _PXM)? > > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? > > Unfortunately _PXM is an awkward fit. Currently the proximity domain > is attached to the SPA range structure. The SPA range may be > associated with multiple DIMM devices and those individual NVDIMMs may > have conflicting _PXM properties. There shouldn't be any conflict here as NVDIMM device's _PXM method, should override in runtime any proximity specified by parent scope. (as parent scope I'd also count boot time NFIT/SRAT tables). To make it more clear we could clear valid proximity domain flag in SPA like this: diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c index 59d6e42..131bca5 100644 --- a/hw/acpi/nvdimm.c +++ b/hw/acpi/nvdimm.c @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) */ nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for management during hot add/online - operation */ | - 2 /* Data in Proximity Domain field is - valid*/); + operation */); /* NUMA node. */ nfit_spa->proximity_domain = cpu_to_le32(node); > Even if that was unified across > DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the > device's control interface, or the assembled persistent memory SPA > range. I'm not sure what you mean under 'device's control interface', could you clarify where the ambiguity comes from? I read spec as: _PXM applies to address range covered by NVDIMM device it belongs to. As for assembled SPA, I'd assume that it applies to interleaved set and all NVDIMMs with it should be on the same node. It's somewhat irrelevant question though as QEMU so far implements only 1:1:1/SPA:Region Mapping:NVDIMM Device/ mapping. My main concern with using static configuration tables for proximity mapping, we'd miss on hotplug side of equation. However if we start from dynamic side first, we could later complement it with static tables if there really were need for it.
On Wed, Feb 21, 2018 at 5:55 AM, Igor Mammedov <imammedo@redhat.com> wrote: > On Tue, 20 Feb 2018 17:17:58 -0800 > Dan Williams <dan.j.williams@intel.com> wrote: > >> On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: >> > On Sat, 17 Feb 2018 14:31:35 +0800 >> > Haozhong Zhang <haozhong.zhang@intel.com> wrote: >> > >> >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity >> >> domain of a NVDIMM SPA range must match with corresponding entry in >> >> SRAT table. >> >> >> >> The address ranges of vNVDIMM in QEMU are allocated from the >> >> hot-pluggable address space, which is entirely covered by one SRAT >> >> memory affinity structure. However, users can set the vNVDIMM >> >> proximity domain in NFIT SPA range structure by the 'node' property of >> >> '-device nvdimm' to a value different than the one in the above SRAT >> >> memory affinity structure. >> >> >> >> In order to solve such proximity domain mismatch, this patch build one >> >> SRAT memory affinity structure for each NVDIMM device with the >> >> proximity domain used in NFIT. The remaining hot-pluggable address >> >> space is covered by one or multiple SRAT memory affinity structures >> >> with the proximity domain of the last node as before. >> >> >> >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> >> > If we consider hotpluggable system, correctly implemented OS should >> > be able pull proximity from Device::_PXM and override any value from SRAT. >> > Do we really have a problem here (anything that breaks if we would use _PXM)? >> > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? >> >> Unfortunately _PXM is an awkward fit. Currently the proximity domain >> is attached to the SPA range structure. The SPA range may be >> associated with multiple DIMM devices and those individual NVDIMMs may >> have conflicting _PXM properties. > There shouldn't be any conflict here as NVDIMM device's _PXM method, > should override in runtime any proximity specified by parent scope. > (as parent scope I'd also count boot time NFIT/SRAT tables). > > To make it more clear we could clear valid proximity domain flag in SPA > like this: > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > index 59d6e42..131bca5 100644 > --- a/hw/acpi/nvdimm.c > +++ b/hw/acpi/nvdimm.c > @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) > */ > nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for > management during hot add/online > - operation */ | > - 2 /* Data in Proximity Domain field is > - valid*/); > + operation */); > > /* NUMA node. */ > nfit_spa->proximity_domain = cpu_to_le32(node); > >> Even if that was unified across >> DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the >> device's control interface, or the assembled persistent memory SPA >> range. > I'm not sure what you mean under 'device's control interface', > could you clarify where the ambiguity comes from? There are multiple SPA range types. In addition to the typical Persistent Memory SPA range there are also Control Region SPA ranges for MMIO registers on the DIMM for Block Apertures and other purposes. > > I read spec as: _PXM applies to address range covered by NVDIMM > device it belongs to. No, an NVDIMM may contribute to multiple SPA ranges and those ranges may span sockets. > > As for assembled SPA, I'd assume that it applies to interleaved set > and all NVDIMMs with it should be on the same node. It's somewhat > irrelevant question though as QEMU so far implements only > 1:1:1/SPA:Region Mapping:NVDIMM Device/ > mapping. > > My main concern with using static configuration tables for proximity > mapping, we'd miss on hotplug side of equation. However if we start > from dynamic side first, we could later complement it with static > tables if there really were need for it. Especially when you consider the new HMAT table that wants to have proximity domains for describing performance characteristics of an address range relative to an initiator, the _PXM method on an individual NVDIMM device is a poor fit for describing a wider set.
On 02/21/18 14:55 +0100, Igor Mammedov wrote: > On Tue, 20 Feb 2018 17:17:58 -0800 > Dan Williams <dan.j.williams@intel.com> wrote: > > > On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > > > On Sat, 17 Feb 2018 14:31:35 +0800 > > > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > > > > > >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > > >> domain of a NVDIMM SPA range must match with corresponding entry in > > >> SRAT table. > > >> > > >> The address ranges of vNVDIMM in QEMU are allocated from the > > >> hot-pluggable address space, which is entirely covered by one SRAT > > >> memory affinity structure. However, users can set the vNVDIMM > > >> proximity domain in NFIT SPA range structure by the 'node' property of > > >> '-device nvdimm' to a value different than the one in the above SRAT > > >> memory affinity structure. > > >> > > >> In order to solve such proximity domain mismatch, this patch build one > > >> SRAT memory affinity structure for each NVDIMM device with the > > >> proximity domain used in NFIT. The remaining hot-pluggable address > > >> space is covered by one or multiple SRAT memory affinity structures > > >> with the proximity domain of the last node as before. > > >> > > >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > > > If we consider hotpluggable system, correctly implemented OS should > > > be able pull proximity from Device::_PXM and override any value from SRAT. > > > Do we really have a problem here (anything that breaks if we would use _PXM)? > > > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? > > > > Unfortunately _PXM is an awkward fit. Currently the proximity domain > > is attached to the SPA range structure. The SPA range may be > > associated with multiple DIMM devices and those individual NVDIMMs may > > have conflicting _PXM properties. > There shouldn't be any conflict here as NVDIMM device's _PXM method, > should override in runtime any proximity specified by parent scope. > (as parent scope I'd also count boot time NFIT/SRAT tables). > > To make it more clear we could clear valid proximity domain flag in SPA > like this: > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > index 59d6e42..131bca5 100644 > --- a/hw/acpi/nvdimm.c > +++ b/hw/acpi/nvdimm.c > @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) > */ > nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for > management during hot add/online > - operation */ | > - 2 /* Data in Proximity Domain field is > - valid*/); > + operation */); > > /* NUMA node. */ > nfit_spa->proximity_domain = cpu_to_le32(node); > > > Even if that was unified across > > DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the > > device's control interface, or the assembled persistent memory SPA > > range. > I'm not sure what you mean under 'device's control interface', > could you clarify where the ambiguity comes from? > > I read spec as: _PXM applies to address range covered by NVDIMM > device it belongs to. > > As for assembled SPA, I'd assume that it applies to interleaved set > and all NVDIMMs with it should be on the same node. It's somewhat > irrelevant question though as QEMU so far implements only > 1:1:1/SPA:Region Mapping:NVDIMM Device/ > mapping. > > My main concern with using static configuration tables for proximity > mapping, we'd miss on hotplug side of equation. However if we start > from dynamic side first, we could later complement it with static > tables if there really were need for it. This patch affects only the static tables and static-plugged NVDIMM. For hot-plugged NVDIMMs, guest OSPM still needs to evaluate _FIT to get the information of the new NVDIMMs including their proximity domains. One intention of this patch is to simulate the bare metal as much as possible. I have been using this patch to develop and test NVDIMM enabling work on Xen, and think it might be useful for developers of other OS and hypervisors. Haozhong
Hi, This series failed build test on s390x host. Please find the details below. N/A. Internal error while reading log file --- Email generated automatically by Patchew [http://patchew.org/]. Please send your feedback to patchew-devel@freelists.org
Hi Fam, On 02/23/18 17:17 -0800, no-reply@patchew.org wrote: > Hi, > > This series failed build test on s390x host. Please find the details below. > > N/A. Internal error while reading log file What does this message mean? Where can I get the log file? Thanks, Haozhong
On Thu, 22 Feb 2018 09:40:00 +0800 Haozhong Zhang <haozhong.zhang@intel.com> wrote: > On 02/21/18 14:55 +0100, Igor Mammedov wrote: > > On Tue, 20 Feb 2018 17:17:58 -0800 > > Dan Williams <dan.j.williams@intel.com> wrote: > > > > > On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > > > > On Sat, 17 Feb 2018 14:31:35 +0800 > > > > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > > > > > > > >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > > > >> domain of a NVDIMM SPA range must match with corresponding entry in > > > >> SRAT table. > > > >> > > > >> The address ranges of vNVDIMM in QEMU are allocated from the > > > >> hot-pluggable address space, which is entirely covered by one SRAT > > > >> memory affinity structure. However, users can set the vNVDIMM > > > >> proximity domain in NFIT SPA range structure by the 'node' property of > > > >> '-device nvdimm' to a value different than the one in the above SRAT > > > >> memory affinity structure. > > > >> > > > >> In order to solve such proximity domain mismatch, this patch build one > > > >> SRAT memory affinity structure for each NVDIMM device with the > > > >> proximity domain used in NFIT. The remaining hot-pluggable address > > > >> space is covered by one or multiple SRAT memory affinity structures > > > >> with the proximity domain of the last node as before. > > > >> > > > >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > > > > If we consider hotpluggable system, correctly implemented OS should > > > > be able pull proximity from Device::_PXM and override any value from SRAT. > > > > Do we really have a problem here (anything that breaks if we would use _PXM)? > > > > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? > > > > > > Unfortunately _PXM is an awkward fit. Currently the proximity domain > > > is attached to the SPA range structure. The SPA range may be > > > associated with multiple DIMM devices and those individual NVDIMMs may > > > have conflicting _PXM properties. > > There shouldn't be any conflict here as NVDIMM device's _PXM method, > > should override in runtime any proximity specified by parent scope. > > (as parent scope I'd also count boot time NFIT/SRAT tables). > > > > To make it more clear we could clear valid proximity domain flag in SPA > > like this: > > > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > > index 59d6e42..131bca5 100644 > > --- a/hw/acpi/nvdimm.c > > +++ b/hw/acpi/nvdimm.c > > @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) > > */ > > nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for > > management during hot add/online > > - operation */ | > > - 2 /* Data in Proximity Domain field is > > - valid*/); > > + operation */); > > > > /* NUMA node. */ > > nfit_spa->proximity_domain = cpu_to_le32(node); > > > > > Even if that was unified across > > > DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the > > > device's control interface, or the assembled persistent memory SPA > > > range. > > I'm not sure what you mean under 'device's control interface', > > could you clarify where the ambiguity comes from? > > > > I read spec as: _PXM applies to address range covered by NVDIMM > > device it belongs to. > > > > As for assembled SPA, I'd assume that it applies to interleaved set > > and all NVDIMMs with it should be on the same node. It's somewhat > > irrelevant question though as QEMU so far implements only > > 1:1:1/SPA:Region Mapping:NVDIMM Device/ > > mapping. > > > > My main concern with using static configuration tables for proximity > > mapping, we'd miss on hotplug side of equation. However if we start > > from dynamic side first, we could later complement it with static > > tables if there really were need for it. > > This patch affects only the static tables and static-plugged NVDIMM. > For hot-plugged NVDIMMs, guest OSPM still needs to evaluate _FIT to > get the information of the new NVDIMMs including their proximity > domains. > > One intention of this patch is to simulate the bare metal as much as > possible. I have been using this patch to develop and test NVDIMM > enabling work on Xen, and think it might be useful for developers of > other OS and hypervisors. It's simpler on bare metal as systems usually statically partitioned according to capacity slots are able to handle. The patch is technically correct and might be useful, especially in current case case flag /* Data in Proximity Domain field is valid*/ set, to conform to the spec. So just complement the patch with test case as requested and it should be fine to merge. PS: while adding ranges for present NVDIMMs in SRAT it would be better to generalize a bit and include present pc-dimms there as well to be consistent with SRAT partitioning. PS2: As food for future discussion, what I'm trying to figure out if we should use the valid flag or not, as its use creates multiple sources for proximity domain SRAT / SPA / _PXM / HMAT that all must match each other, which is rather fragile and easy to break. On the other hand if we clear the flag, OSPM will have the single source of information (_PXM) per nvdimm device, which has 'override' behavior over SRAT. > Haozhong >
On Wed, 21 Feb 2018 06:51:11 -0800 Dan Williams <dan.j.williams@intel.com> wrote: > On Wed, Feb 21, 2018 at 5:55 AM, Igor Mammedov <imammedo@redhat.com> wrote: > > On Tue, 20 Feb 2018 17:17:58 -0800 > > Dan Williams <dan.j.williams@intel.com> wrote: > > > >> On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > >> > On Sat, 17 Feb 2018 14:31:35 +0800 > >> > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > >> > > >> >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > >> >> domain of a NVDIMM SPA range must match with corresponding entry in > >> >> SRAT table. > >> >> > >> >> The address ranges of vNVDIMM in QEMU are allocated from the > >> >> hot-pluggable address space, which is entirely covered by one SRAT > >> >> memory affinity structure. However, users can set the vNVDIMM > >> >> proximity domain in NFIT SPA range structure by the 'node' property of > >> >> '-device nvdimm' to a value different than the one in the above SRAT > >> >> memory affinity structure. > >> >> > >> >> In order to solve such proximity domain mismatch, this patch build one > >> >> SRAT memory affinity structure for each NVDIMM device with the > >> >> proximity domain used in NFIT. The remaining hot-pluggable address > >> >> space is covered by one or multiple SRAT memory affinity structures > >> >> with the proximity domain of the last node as before. > >> >> > >> >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > >> > If we consider hotpluggable system, correctly implemented OS should > >> > be able pull proximity from Device::_PXM and override any value from SRAT. > >> > Do we really have a problem here (anything that breaks if we would use _PXM)? > >> > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? > >> > >> Unfortunately _PXM is an awkward fit. Currently the proximity domain > >> is attached to the SPA range structure. The SPA range may be > >> associated with multiple DIMM devices and those individual NVDIMMs may > >> have conflicting _PXM properties. > > There shouldn't be any conflict here as NVDIMM device's _PXM method, > > should override in runtime any proximity specified by parent scope. > > (as parent scope I'd also count boot time NFIT/SRAT tables). > > > > To make it more clear we could clear valid proximity domain flag in SPA > > like this: > > > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > > index 59d6e42..131bca5 100644 > > --- a/hw/acpi/nvdimm.c > > +++ b/hw/acpi/nvdimm.c > > @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) > > */ > > nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for > > management during hot add/online > > - operation */ | > > - 2 /* Data in Proximity Domain field is > > - valid*/); > > + operation */); > > > > /* NUMA node. */ > > nfit_spa->proximity_domain = cpu_to_le32(node); > > > >> Even if that was unified across > >> DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the > >> device's control interface, or the assembled persistent memory SPA > >> range. > > I'm not sure what you mean under 'device's control interface', > > could you clarify where the ambiguity comes from? > > There are multiple SPA range types. In addition to the typical > Persistent Memory SPA range there are also Control Region SPA ranges > for MMIO registers on the DIMM for Block Apertures and other purposes. > > > > > I read spec as: _PXM applies to address range covered by NVDIMM > > device it belongs to. > > No, an NVDIMM may contribute to multiple SPA ranges and those ranges > may span sockets. Isn't NVDIMM device plugged into a single socket which belongs to a single numa node? If it's so then shouldn't SPAs referencing it also have the same proximity domain? > > As for assembled SPA, I'd assume that it applies to interleaved set > > and all NVDIMMs with it should be on the same node. It's somewhat > > irrelevant question though as QEMU so far implements only > > 1:1:1/SPA:Region Mapping:NVDIMM Device/ > > mapping. > > > > My main concern with using static configuration tables for proximity > > mapping, we'd miss on hotplug side of equation. However if we start > > from dynamic side first, we could later complement it with static > > tables if there really were need for it. > > Especially when you consider the new HMAT table that wants to have > proximity domains for describing performance characteristics of an > address range relative to an initiator, the _PXM method on an > individual NVDIMM device is a poor fit for describing a wider set. >
On 02/26/18 14:59 +0100, Igor Mammedov wrote: > On Thu, 22 Feb 2018 09:40:00 +0800 > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > > > On 02/21/18 14:55 +0100, Igor Mammedov wrote: > > > On Tue, 20 Feb 2018 17:17:58 -0800 > > > Dan Williams <dan.j.williams@intel.com> wrote: > > > > > > > On Tue, Feb 20, 2018 at 6:10 AM, Igor Mammedov <imammedo@redhat.com> wrote: > > > > > On Sat, 17 Feb 2018 14:31:35 +0800 > > > > > Haozhong Zhang <haozhong.zhang@intel.com> wrote: > > > > > > > > > >> ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity > > > > >> domain of a NVDIMM SPA range must match with corresponding entry in > > > > >> SRAT table. > > > > >> > > > > >> The address ranges of vNVDIMM in QEMU are allocated from the > > > > >> hot-pluggable address space, which is entirely covered by one SRAT > > > > >> memory affinity structure. However, users can set the vNVDIMM > > > > >> proximity domain in NFIT SPA range structure by the 'node' property of > > > > >> '-device nvdimm' to a value different than the one in the above SRAT > > > > >> memory affinity structure. > > > > >> > > > > >> In order to solve such proximity domain mismatch, this patch build one > > > > >> SRAT memory affinity structure for each NVDIMM device with the > > > > >> proximity domain used in NFIT. The remaining hot-pluggable address > > > > >> space is covered by one or multiple SRAT memory affinity structures > > > > >> with the proximity domain of the last node as before. > > > > >> > > > > >> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> > > > > > If we consider hotpluggable system, correctly implemented OS should > > > > > be able pull proximity from Device::_PXM and override any value from SRAT. > > > > > Do we really have a problem here (anything that breaks if we would use _PXM)? > > > > > Maybe we should add _PXM object to nvdimm device nodes instead of massaging SRAT? > > > > > > > > Unfortunately _PXM is an awkward fit. Currently the proximity domain > > > > is attached to the SPA range structure. The SPA range may be > > > > associated with multiple DIMM devices and those individual NVDIMMs may > > > > have conflicting _PXM properties. > > > There shouldn't be any conflict here as NVDIMM device's _PXM method, > > > should override in runtime any proximity specified by parent scope. > > > (as parent scope I'd also count boot time NFIT/SRAT tables). > > > > > > To make it more clear we could clear valid proximity domain flag in SPA > > > like this: > > > > > > diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c > > > index 59d6e42..131bca5 100644 > > > --- a/hw/acpi/nvdimm.c > > > +++ b/hw/acpi/nvdimm.c > > > @@ -260,9 +260,7 @@ nvdimm_build_structure_spa(GArray *structures, DeviceState *dev) > > > */ > > > nfit_spa->flags = cpu_to_le16(1 /* Control region is strictly for > > > management during hot add/online > > > - operation */ | > > > - 2 /* Data in Proximity Domain field is > > > - valid*/); > > > + operation */); > > > > > > /* NUMA node. */ > > > nfit_spa->proximity_domain = cpu_to_le32(node); > > > > > > > Even if that was unified across > > > > DIMMs it is ambiguous whether a DIMM-device _PXM would relate to the > > > > device's control interface, or the assembled persistent memory SPA > > > > range. > > > I'm not sure what you mean under 'device's control interface', > > > could you clarify where the ambiguity comes from? > > > > > > I read spec as: _PXM applies to address range covered by NVDIMM > > > device it belongs to. > > > > > > As for assembled SPA, I'd assume that it applies to interleaved set > > > and all NVDIMMs with it should be on the same node. It's somewhat > > > irrelevant question though as QEMU so far implements only > > > 1:1:1/SPA:Region Mapping:NVDIMM Device/ > > > mapping. > > > > > > My main concern with using static configuration tables for proximity > > > mapping, we'd miss on hotplug side of equation. However if we start > > > from dynamic side first, we could later complement it with static > > > tables if there really were need for it. > > > > This patch affects only the static tables and static-plugged NVDIMM. > > For hot-plugged NVDIMMs, guest OSPM still needs to evaluate _FIT to > > get the information of the new NVDIMMs including their proximity > > domains. > > > > One intention of this patch is to simulate the bare metal as much as > > possible. I have been using this patch to develop and test NVDIMM > > enabling work on Xen, and think it might be useful for developers of > > other OS and hypervisors. > It's simpler on bare metal as systems usually statically partitioned > according to capacity slots are able to handle. > > The patch is technically correct and might be useful, > especially in current case case flag /* Data in Proximity Domain field is valid*/ > set, to conform to the spec. So just complement the patch with > test case as requested and it should be fine to merge. will add the test case in the next version > > PS: > while adding ranges for present NVDIMMs in SRAT it would be > better to generalize a bit and include present pc-dimms > there as well to be consistent with SRAT partitioning. Yes, I'll add that. > > PS2: > As food for future discussion, what I'm trying to figure out if > we should use the valid flag or not, as its use creates multiple > sources for proximity domain SRAT / SPA / _PXM / HMAT that all must > match each other, which is rather fragile and easy to break. > > On the other hand if we clear the flag, OSPM will have the single source > of information (_PXM) per nvdimm device, which has 'override' behavior over SRAT. I have to admit it's correct according to ACPI spec. However, not all OSPM implementations include a complete ACPICA parser. Yes, I'm talking about Xen which is only capable to parse static ACPI tables, and the case debugging/developing Xen on QEMU. SRAT, NFIT, HMAT, _PXM, _FIT and _HMA (and potentially further tables about resource affinities) are so fundamental and critical for OSPM to *bootstrap* the efficient memory management, so it's unlikely for Xen hypervisor to delegate the parse to Dom0 kernel (which is launched after Xen hypervisor). Fortunately, from my limited observation, the affinity parameters of static plugged DIMMs on physical machines are usually presented in static ACPI tables, so Xen "happens" to work. When I (and probably other Xen and other less-capable OSPM developers) develop/debug those OSPM on QEMU, I hope QEMU can emulate/reproduce a similar environment as the physical, and that is actually the primary motivation of this patch. For the consistence problem, would it be possible to introduce a central numa/pxm/affinity/whatever manager to QEMU? All devices that have those affinity parameters need to register them to the manager during device initialization. The manager is responsible to check the conflicts. When other places in QEMU need the affinity information (e.g., when building SRAT and HMAT), they can just query the manager. Haozhong
diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c index 59d6e4254c..dff0818e77 100644 --- a/hw/acpi/nvdimm.c +++ b/hw/acpi/nvdimm.c @@ -33,12 +33,23 @@ #include "hw/nvram/fw_cfg.h" #include "hw/mem/nvdimm.h" +static gint nvdimm_addr_sort(gconstpointer a, gconstpointer b) +{ + uint64_t addr0 = object_property_get_uint(OBJECT(NVDIMM(a)), + PC_DIMM_ADDR_PROP, NULL); + uint64_t addr1 = object_property_get_uint(OBJECT(NVDIMM(b)), + PC_DIMM_ADDR_PROP, NULL); + + return addr0 < addr1 ? -1 : + addr0 > addr1 ? 1 : 0; +} + static int nvdimm_device_list(Object *obj, void *opaque) { GSList **list = opaque; if (object_dynamic_cast(obj, TYPE_NVDIMM)) { - *list = g_slist_append(*list, DEVICE(obj)); + *list = g_slist_insert_sorted(*list, DEVICE(obj), nvdimm_addr_sort); } object_child_foreach(obj, nvdimm_device_list, opaque); @@ -52,7 +63,7 @@ static int nvdimm_device_list(Object *obj, void *opaque) * Note: it is the caller's responsibility to free the list to avoid * memory leak. */ -static GSList *nvdimm_get_device_list(void) +GSList *nvdimm_get_device_list(void) { GSList *list = NULL; diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index deb440f286..637ac3a8f0 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -2323,6 +2323,46 @@ build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog) #define HOLE_640K_START (640 * 1024) #define HOLE_640K_END (1024 * 1024) +static void build_srat_hotpluggable_memory(GArray *table_data, uint64_t base, + uint64_t len, int default_node) +{ + GSList *nvdimms = nvdimm_get_device_list(); + GSList *ent = nvdimms; + NVDIMMDevice *dev; + uint64_t end = base + len, addr, size; + int node; + AcpiSratMemoryAffinity *numamem; + + while (base < end) { + numamem = acpi_data_push(table_data, sizeof *numamem); + + if (!ent) { + build_srat_memory(numamem, base, end - base, default_node, + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); + break; + } + + dev = NVDIMM(ent->data); + addr = object_property_get_uint(OBJECT(dev), PC_DIMM_ADDR_PROP, NULL); + size = object_property_get_uint(OBJECT(dev), PC_DIMM_SIZE_PROP, NULL); + node = object_property_get_uint(OBJECT(dev), PC_DIMM_NODE_PROP, NULL); + + if (base < addr) { + build_srat_memory(numamem, base, addr - base, default_node, + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); + numamem = acpi_data_push(table_data, sizeof *numamem); + } + build_srat_memory(numamem, addr, size, node, + MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED | + MEM_AFFINITY_NON_VOLATILE); + + base = addr + size; + ent = ent->next; + } + + g_slist_free(nvdimms); +} + static void build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) { @@ -2434,10 +2474,9 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) * providing _PXM method if necessary. */ if (hotplugabble_address_space_size) { - numamem = acpi_data_push(table_data, sizeof *numamem); - build_srat_memory(numamem, pcms->hotplug_memory.base, - hotplugabble_address_space_size, pcms->numa_nodes - 1, - MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED); + build_srat_hotpluggable_memory(table_data, pcms->hotplug_memory.base, + hotplugabble_address_space_size, + pcms->numa_nodes - 1); } build_header(linker, table_data, diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h index 7fd87c4e1c..ca9d6aa714 100644 --- a/include/hw/mem/nvdimm.h +++ b/include/hw/mem/nvdimm.h @@ -144,4 +144,15 @@ void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data, uint32_t ram_slots); void nvdimm_plug(AcpiNVDIMMState *state); void nvdimm_acpi_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev); + +/* + * Inquire NVDIMM devices and link them into the list which is + * returned to the caller and sorted in the ascending order of the + * base address of NVDIMM devices. + * + * Note: it is the caller's responsibility to free the list to avoid + * memory leak. + */ +GSList *nvdimm_get_device_list(void); + #endif
ACPI 6.2A Table 5-129 "SPA Range Structure" requires the proximity domain of a NVDIMM SPA range must match with corresponding entry in SRAT table. The address ranges of vNVDIMM in QEMU are allocated from the hot-pluggable address space, which is entirely covered by one SRAT memory affinity structure. However, users can set the vNVDIMM proximity domain in NFIT SPA range structure by the 'node' property of '-device nvdimm' to a value different than the one in the above SRAT memory affinity structure. In order to solve such proximity domain mismatch, this patch build one SRAT memory affinity structure for each NVDIMM device with the proximity domain used in NFIT. The remaining hot-pluggable address space is covered by one or multiple SRAT memory affinity structures with the proximity domain of the last node as before. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> --- hw/acpi/nvdimm.c | 15 +++++++++++++-- hw/i386/acpi-build.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- include/hw/mem/nvdimm.h | 11 +++++++++++ 3 files changed, 67 insertions(+), 6 deletions(-)