diff mbox series

[V7,3/7] ata: ahci_tegra: Update initialization sequence

Message ID 1518456406-21564-4-git-send-email-pchandru@nvidia.com
State Deferred
Headers show
Series Refactor and add AHCI support for tegra210 | expand

Commit Message

Preetham Chandru Ramchandra Feb. 12, 2018, 5:26 p.m. UTC 
From: Preetham Ramchandra <pchandru@nvidia.com>

Update the controller initialization sequence and move
t124 specifics to tegra124_ahci_init.

Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
---
v7:
* moveed tegra124_ahci_soc_data definition to be
  just above the of_device_id table.
---
 drivers/ata/ahci_tegra.c | 288 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 223 insertions(+), 65 deletions(-)

Comments

Thierry Reding Feb. 19, 2018, 2:41 p.m. UTC | #1 
On Mon, Feb 12, 2018 at 10:56:42PM +0530, Preetham Chandru Ramchandra wrote:
> From: Preetham Ramchandra <pchandru@nvidia.com>
> 
> Update the controller initialization sequence and move
> t124 specifics to tegra124_ahci_init.
> 
> Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
> ---
> v7:
> * moveed tegra124_ahci_soc_data definition to be
>   just above the of_device_id table.
> ---
>  drivers/ata/ahci_tegra.c | 288 ++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 223 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
> index 3a62eb246d80..7ffe8a97447a 100644
> --- a/drivers/ata/ahci_tegra.c
> +++ b/drivers/ata/ahci_tegra.c
[...]
> @@ -99,6 +159,14 @@ static const struct sata_pad_calibration tegra124_pad_calibration[] = {
>  	{0x14, 0x0e, 0x1a, 0x0e},
>  };
>  
> +struct tegra_ahci_ops {
> +	int (*init)(struct ahci_host_priv *hpriv);
> +};
> +
> +struct tegra_ahci_soc {
> +	struct tegra_ahci_ops	ops;
> +};
> +
>  struct tegra_ahci_priv {
>  	struct platform_device	   *pdev;
>  	void __iomem		   *sata_regs;
> @@ -108,8 +176,53 @@ struct tegra_ahci_priv {
>  	/* Needs special handling, cannot use ahci_platform */
>  	struct clk		   *sata_clk;
>  	struct regulator_bulk_data supplies[5];
> +	struct tegra_ahci_soc	   *soc_data;

This should be const. I also think the _data suffix is unnecessary.

> @@ -145,7 +258,6 @@ static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
>  
>  disable_regulators:
>  	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
> -
>  	return ret;
>  }

Unneeded whitespace change.

> @@ -179,78 +290,114 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
>  		return ret;
>  	}
>  
> +	/*
> +	 * Program the following SATA IPFS registers
> +	 * to allow SW accesses to SATA's MMIO register range.
> +	 */

You can also use the full width of a line for comments. No need to wrap
at arbitrary points.

> @@ -285,8 +432,17 @@ static const struct ata_port_info ahci_tegra_port_info = {
>  	.port_ops	= &ahci_tegra_port_ops,
>  };
>  
> +static const struct tegra_ahci_soc tegra124_ahci_soc_data = {
> +	.ops = {
> +		.init = tegra124_ahci_init,
> +	},
> +};
> +

Again, I don't think there's a need for _data. Also, you've made this
const, so tegra->soc(_data) should also be const. One rule of thumb is
that if you have const in one place, then you need to make it const
everywhere.

>  static const struct of_device_id tegra_ahci_of_match[] = {
> -	{ .compatible = "nvidia,tegra124-ahci" },
> +	{
> +		.compatible = "nvidia,tegra124-ahci",
> +		.data = &tegra124_ahci_soc_data
> +	},
>  	{}
>  };

of_device_id.data is const as well, which is why this compiles properly.

>  MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
> @@ -313,6 +469,8 @@ static int tegra_ahci_probe(struct platform_device *pdev)
>  	hpriv->plat_data = tegra;
>  
>  	tegra->pdev = pdev;
> +	tegra->soc_data =
> +	    (struct tegra_ahci_soc *)of_device_get_match_data(&pdev->dev);

And if you make tegra->soc(_data) const, then there's no need for this
cast, you can simply assign directly:

	tegra->soc = of_device_get_match_data(&pdev->dev);

void * will be automatically cast to any other pointer. The only reason
why you need the cast above is to avoid the compiler from warning about
the const qualifier being cast away.

Once const, always const.

Thierry
Thierry Reding Feb. 19, 2018, 2:54 p.m. UTC | #2 
On Mon, Feb 12, 2018 at 10:56:42PM +0530, Preetham Chandru Ramchandra wrote:
> From: Preetham Ramchandra <pchandru@nvidia.com>
> 
> Update the controller initialization sequence and move
> t124 specifics to tegra124_ahci_init.
> 
> Signed-off-by: Preetham Chandru R <pchandru@nvidia.com>
> ---
> v7:
> * moveed tegra124_ahci_soc_data definition to be
>   just above the of_device_id table.
> ---
>  drivers/ata/ahci_tegra.c | 288 ++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 223 insertions(+), 65 deletions(-)
> 
> diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
> index 3a62eb246d80..7ffe8a97447a 100644
> --- a/drivers/ata/ahci_tegra.c
> +++ b/drivers/ata/ahci_tegra.c
[...]
> @@ -99,6 +159,14 @@ static const struct sata_pad_calibration tegra124_pad_calibration[] = {
>  	{0x14, 0x0e, 0x1a, 0x0e},
>  };
>  
> +struct tegra_ahci_ops {
> +	int (*init)(struct ahci_host_priv *hpriv);
> +};
> +
> +struct tegra_ahci_soc {
> +	struct tegra_ahci_ops	ops;
> +};

Just noticed this: it's slightly more customary to make ops a pointer to
a function table, like so:

	struct tegra_ahci_soc {
		const struct tegra_ahci_ops *ops;
	};

and then have:

	static const struct tegra_ahci_ops tegra124_ahci_ops = {
		.init = tegra124_ahci_init,
	};

	static const struct tegra_ahci_soc tegra124_ahci_soc = {
		.ops = &tegra124_ahci_ops,
	};

That's not terribly useful in this case because the ops are not passed
around or shared between multiple instances, so there are no benefits.
Either way is fine here, I guess.

Thierry
diff mbox series

Patch

diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index 3a62eb246d80..7ffe8a97447a 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -34,7 +34,8 @@ 
 #define DRV_NAME "tegra-ahci"
 
 #define SATA_CONFIGURATION_0				0x180
-#define SATA_CONFIGURATION_EN_FPCI			BIT(0)
+#define SATA_CONFIGURATION_0_EN_FPCI			BIT(0)
+#define SATA_CONFIGURATION_0_CLK_OVERRIDE			BIT(31)
 
 #define SCFG_OFFSET					0x1000
 
@@ -45,17 +46,55 @@ 
 #define T_SATA0_CFG_1_SERR				BIT(8)
 
 #define T_SATA0_CFG_9					0x24
-#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT		13
+#define T_SATA0_CFG_9_BASE_ADDRESS			0x40020000
 
 #define SATA_FPCI_BAR5					0x94
-#define SATA_FPCI_BAR5_START_SHIFT			4
+#define SATA_FPCI_BAR5_START_MASK			(0xfffffff << 4)
+#define SATA_FPCI_BAR5_START				(0x0040020 << 4)
+#define SATA_FPCI_BAR5_ACCESS_TYPE			(0x1)
 
 #define SATA_INTR_MASK					0x188
 #define SATA_INTR_MASK_IP_INT_MASK			BIT(16)
 
+#define T_SATA0_CFG_35					0x94
+#define T_SATA0_CFG_35_IDP_INDEX_MASK			(0x7ff << 2)
+#define T_SATA0_CFG_35_IDP_INDEX			(0x2a << 2)
+
+#define T_SATA0_AHCI_IDP1				0x98
+#define T_SATA0_AHCI_IDP1_DATA				(0x400040)
+
+#define T_SATA0_CFG_PHY_1				0x12c
+#define T_SATA0_CFG_PHY_1_PADS_IDDQ_EN			BIT(23)
+#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN		BIT(22)
+
+#define T_SATA0_NVOOB                                   0x114
+#define T_SATA0_NVOOB_COMMA_CNT_MASK                    (0xff << 16)
+#define T_SATA0_NVOOB_COMMA_CNT                         (0x07 << 16)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK          (0x3 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE               (0x1 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK        (0x3 << 26)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH             (0x3 << 26)
+
+#define T_SATA_CFG_PHY_0                                0x120
+#define T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD     BIT(11)
+#define T_SATA_CFG_PHY_0_MASK_SQUELCH                   BIT(24)
+
+#define T_SATA0_CFG2NVOOB_2				0x134
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK	(0x1ff << 18)
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW	(0xc << 18)
+
 #define T_SATA0_AHCI_HBA_CAP_BKDR			0x300
+#define T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP	BIT(13)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP	BIT(14)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SALP			BIT(26)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM		BIT(17)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SNCQ			BIT(30)
 
 #define T_SATA0_BKDOOR_CC				0x4a4
+#define T_SATA0_BKDOOR_CC_CLASS_CODE_MASK		(0xffff << 16)
+#define T_SATA0_BKDOOR_CC_CLASS_CODE			(0x0106 << 16)
+#define T_SATA0_BKDOOR_CC_PROG_IF_MASK			(0xff << 8)
+#define T_SATA0_BKDOOR_CC_PROG_IF			(0x01 << 8)
 
 #define T_SATA0_CFG_SATA				0x54c
 #define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN		BIT(12)
@@ -82,6 +121,27 @@ 
 #define T_SATA0_CHX_PHY_CTRL11				0x6d0
 #define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ		(0x2800 << 16)
 
+#define T_SATA0_CHX_PHY_CTRL17_0			0x6e8
+#define T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1	0x55010000
+#define T_SATA0_CHX_PHY_CTRL18_0			0x6ec
+#define T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2	0x55010000
+#define T_SATA0_CHX_PHY_CTRL20_0			0x6f4
+#define T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1	0x1
+#define T_SATA0_CHX_PHY_CTRL21_0			0x6f8
+#define T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2	0x1
+
+/* AUX Registers */
+#define SATA_AUX_MISC_CNTL_1_0				0x8
+#define SATA_AUX_MISC_CNTL_1_0_DEVSLP_OVERRIDE		BIT(17)
+#define SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT		BIT(13)
+#define SATA_AUX_MISC_CNTL_1_0_DESO_SUPPORT		BIT(15)
+
+#define SATA_AUX_RX_STAT_INT_0				0xc
+#define SATA_AUX_RX_STAT_INT_0_SATA_DEVSLP		BIT(7)
+
+#define SATA_AUX_SPARE_CFG0_0				0x18
+#define SATA_AUX_SPARE_CFG0_0_MDAT_TIMER_AFTER_PG_VALID	BIT(14)
+
 #define FUSE_SATA_CALIB					0x124
 #define FUSE_SATA_CALIB_MASK				0x3
 
@@ -99,6 +159,14 @@  static const struct sata_pad_calibration tegra124_pad_calibration[] = {
 	{0x14, 0x0e, 0x1a, 0x0e},
 };
 
+struct tegra_ahci_ops {
+	int (*init)(struct ahci_host_priv *hpriv);
+};
+
+struct tegra_ahci_soc {
+	struct tegra_ahci_ops	ops;
+};
+
 struct tegra_ahci_priv {
 	struct platform_device	   *pdev;
 	void __iomem		   *sata_regs;
@@ -108,8 +176,53 @@  struct tegra_ahci_priv {
 	/* Needs special handling, cannot use ahci_platform */
 	struct clk		   *sata_clk;
 	struct regulator_bulk_data supplies[5];
+	struct tegra_ahci_soc	   *soc_data;
 };
 
+static int tegra124_ahci_init(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+	struct sata_pad_calibration calib;
+	int ret;
+	u32 val;
+
+	/* Pad calibration */
+	ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
+	if (ret)
+		return ret;
+
+	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
+
+	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	val = readl(tegra->sata_regs +
+		    SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
+	val |= calib.gen1_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen1_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+	       T_SATA0_CHX_PHY_CTRL1_GEN1);
+
+	val = readl(tegra->sata_regs +
+		    SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
+	val |= calib.gen2_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen2_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+	       T_SATA0_CHX_PHY_CTRL1_GEN2);
+
+	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
+	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
+	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
+	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
+
+	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	return 0;
+}
+
 static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
 {
 	struct tegra_ahci_priv *tegra = hpriv->plat_data;
@@ -145,7 +258,6 @@  static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
 
 disable_regulators:
 	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
-
 	return ret;
 }
 
@@ -169,8 +281,7 @@  static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
 {
 	struct tegra_ahci_priv *tegra = hpriv->plat_data;
 	int ret;
-	unsigned int val;
-	struct sata_pad_calibration calib;
+	u32 val;
 
 	ret = tegra_ahci_power_on(hpriv);
 	if (ret) {
@@ -179,78 +290,114 @@  static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
 		return ret;
 	}
 
+	/*
+	 * Program the following SATA IPFS registers
+	 * to allow SW accesses to SATA's MMIO register range.
+	 */
+	val = readl(tegra->sata_regs + SATA_FPCI_BAR5);
+	val &= ~(SATA_FPCI_BAR5_START_MASK | SATA_FPCI_BAR5_ACCESS_TYPE);
+	val |= SATA_FPCI_BAR5_START | SATA_FPCI_BAR5_ACCESS_TYPE;
+	writel(val, tegra->sata_regs + SATA_FPCI_BAR5);
+
+	/* Program the following SATA IPFS register to enable the SATA */
 	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
-	val |= SATA_CONFIGURATION_EN_FPCI;
+	val |= SATA_CONFIGURATION_0_EN_FPCI;
 	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
 
-	/* Pad calibration */
-
-	ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
-	if (ret) {
-		dev_err(&tegra->pdev->dev,
-			"failed to read calibration fuse: %d\n", ret);
-		return ret;
-	}
-
-	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
-
-	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
-
-	val = readl(tegra->sata_regs +
-		SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
-	val |= calib.gen1_tx_amp <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
-	val |= calib.gen1_tx_peak <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
-	writel(val, tegra->sata_regs + SCFG_OFFSET +
-		T_SATA0_CHX_PHY_CTRL1_GEN1);
-
-	val = readl(tegra->sata_regs +
-			SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
-	val |= calib.gen2_tx_amp <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
-	val |= calib.gen2_tx_peak <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
-	writel(val, tegra->sata_regs + SCFG_OFFSET +
-		T_SATA0_CHX_PHY_CTRL1_GEN2);
-
-	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
-		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
-	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
-		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
-
-	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
-
-	/* Program controller device ID */
+	/* Electrical settings for better link stability */
+	val = T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL17_0);
+	val = T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL18_0);
+	val = T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL20_0);
+	val = T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL21_0);
+
+	/* For SQUELCH Filter & Gen3 drive getting detected as Gen1 drive */
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+	val |= T_SATA_CFG_PHY_0_MASK_SQUELCH;
+	val &= ~T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+	val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK |
+		 T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK |
+		 T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK);
+	val |= (T_SATA0_NVOOB_COMMA_CNT |
+		T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH |
+		T_SATA0_NVOOB_SQUELCH_FILTER_MODE);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+
+	/*
+	 * Change CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW from 83.3 ns to 58.8ns
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
+	val &= ~T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK;
+	val |= T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
+
+	if (tegra->soc_data->ops.init)
+		tegra->soc_data->ops.init(hpriv);
+
+	/*
+	 * Program the following SATA configuration registers
+	 * to initialize SATA
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val |= (T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
+		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val = T_SATA0_CFG_9_BASE_ADDRESS;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
 
+	/* Program Class Code and Programming interface for SATA */
 	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 	val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
 	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 
-	writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+	val &=
+	    ~(T_SATA0_BKDOOR_CC_CLASS_CODE_MASK |
+	      T_SATA0_BKDOOR_CC_PROG_IF_MASK);
+	val |= T_SATA0_BKDOOR_CC_CLASS_CODE | T_SATA0_BKDOOR_CC_PROG_IF;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
 
 	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 	val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
 	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 
-	/* Enable IO & memory access, bus master mode */
-
-	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
-	val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
-		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
-	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
-
-	/* Program SATA MMIO */
-
-	writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
-	       tegra->sata_regs + SATA_FPCI_BAR5);
+	/* Enabling LPM capabilities through Backdoor Programming */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+	val |= (T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SALP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+
+	/* SATA Second Level Clock Gating configuration
+	 * Enabling Gating of Tx/Rx clocks and driving Pad IDDQ and Lane
+	 * IDDQ Signals
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
+	val &= ~T_SATA0_CFG_35_IDP_INDEX_MASK;
+	val |= T_SATA0_CFG_35_IDP_INDEX;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
+
+	val = T_SATA0_AHCI_IDP1_DATA;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_IDP1);
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
+	val |= (T_SATA0_CFG_PHY_1_PADS_IDDQ_EN |
+		T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
+
+	/* Enabling IPFS Clock Gating */
+	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
+	val &= ~SATA_CONFIGURATION_0_CLK_OVERRIDE;
+	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
 
-	writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
-	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
 
 	/* Unmask SATA interrupts */
 
@@ -285,8 +432,17 @@  static const struct ata_port_info ahci_tegra_port_info = {
 	.port_ops	= &ahci_tegra_port_ops,
 };
 
+static const struct tegra_ahci_soc tegra124_ahci_soc_data = {
+	.ops = {
+		.init = tegra124_ahci_init,
+	},
+};
+
 static const struct of_device_id tegra_ahci_of_match[] = {
-	{ .compatible = "nvidia,tegra124-ahci" },
+	{
+		.compatible = "nvidia,tegra124-ahci",
+		.data = &tegra124_ahci_soc_data
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
@@ -313,6 +469,8 @@  static int tegra_ahci_probe(struct platform_device *pdev)
 	hpriv->plat_data = tegra;
 
 	tegra->pdev = pdev;
+	tegra->soc_data =
+	    (struct tegra_ahci_soc *)of_device_get_match_data(&pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);