| Message ID | 1518351341-6740-2-git-send-email-yossim@codeaurora.org |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | None | expand |
On Sun, Feb 11, 2018 at 02:15:40PM +0200, Yossi Mansharoff wrote: > On the db410c 96boards platform we have a TC7USB40MU on the board > to mux the D+/D- lines coming from the controller between a micro > usb "device" port and a USB hub for "host" roles[1]. During a > role switch, we need to toggle this mux to forward the D+/D- > lines to either the port or the hub. Add the necessary code to do > the role switch in chipidea core via the generic mux framework. > Board configurations like on db410c are expected to change roles > via the sysfs API described in > Documentation/ABI/testing/sysfs-platform-chipidea-usb2. > > [1] https://github.com/96boards/documentation/raw/master/ConsumerEdition/DragonBoard-410c/HardwareDocs/Schematics_DragonBoard.pdf > > Cc: Peter Rosin <peda@axentia.se> > Cc: Peter Chen <peter.chen@nxp.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: <devicetree@vger.kernel.org> > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > > Signed-off-by: Yossi Mansharoff <yossim@codeaurora.org> > --- > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 6 ++++++ > drivers/usb/chipidea/Kconfig | 2 ++ > drivers/usb/chipidea/core.c | 6 ++++++ > drivers/usb/chipidea/host.c | 7 +++++++ > drivers/usb/chipidea/udc.c | 13 ++++++++++++- > include/linux/usb/chipidea.h | 2 ++ > 6 files changed, 35 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > index 0e03344..2e93181 100644 > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -76,6 +76,10 @@ Optional properties: > needs to make sure it does not send more than 90% > maximum_periodic_data_per_frame. The use case is multiple transactions, but > less frame rate. > +- mux-controls: The mux control for toggling host/device output of this > + controller. It's expected that a mux state of 0 indicates device mode and a > + mux state of 1 indicates host mode. > +- mux-control-names: Shall be "usb_switch" if mux-controls is specified. Kind of pointless to have -names when there is only one. Otherwise, the binding looks okay to me. > > i.mx specific properties > - fsl,usbmisc: phandler of non-core register device, with one > @@ -102,4 +106,6 @@ Example: > rx-burst-size-dword = <0x10>; > extcon = <0>, <&usb_id>; > phy-clkgate-delay-us = <400>; > + mux-controls = <&usb_switch>; > + mux-control-names = "usb_switch"; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 0e03344..2e93181 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -76,6 +76,10 @@ Optional properties: needs to make sure it does not send more than 90% maximum_periodic_data_per_frame. The use case is multiple transactions, but less frame rate. +- mux-controls: The mux control for toggling host/device output of this + controller. It's expected that a mux state of 0 indicates device mode and a + mux state of 1 indicates host mode. +- mux-control-names: Shall be "usb_switch" if mux-controls is specified. i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one @@ -102,4 +106,6 @@ Example: rx-burst-size-dword = <0x10>; extcon = <0>, <&usb_id>; phy-clkgate-delay-us = <400>; + mux-controls = <&usb_switch>; + mux-control-names = "usb_switch"; }; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 785f0ed..6a8e635 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -3,6 +3,8 @@ config USB_CHIPIDEA depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA select EXTCON select RESET_CONTROLLER + select MULTIPLEXER + select MUX_GPIO help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index dd2dd93..4a9e139 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -61,6 +61,7 @@ #include <linux/of.h> #include <linux/regulator/consumer.h> #include <linux/usb/ehci_def.h> +#include <linux/mux/consumer.h> #include "ci.h" #include "udc.h" @@ -687,6 +688,11 @@ static int ci_get_platdata(struct device *dev, if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL)) platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA; + platdata->usb_switch = devm_mux_control_get_optional(dev, "usb_switch"); + if (IS_ERR(platdata->usb_switch)){ + return PTR_ERR(platdata->usb_switch); + } + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(dev->of_node, "extcon")) { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 19d60ed..7bd630e 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -13,6 +13,7 @@ #include <linux/usb/hcd.h> #include <linux/usb/chipidea.h> #include <linux/regulator/consumer.h> +#include <linux/mux/consumer.h> #include "../host/ehci.h" @@ -163,6 +164,10 @@ static int host_start(struct ci_hdrc *ci) if (ci_otg_is_fsm_mode(ci)) { otg->host = &hcd->self; hcd->self.otg_port = 1; + } else { + ret = mux_control_select(ci->platdata->usb_switch, 1); + if (ret) + goto disable_reg; } } @@ -183,6 +188,8 @@ static void host_stop(struct ci_hdrc *ci) struct usb_hcd *hcd = ci->hcd; if (hcd) { + if (!ci_otg_is_fsm_mode(ci)) + mux_control_deselect(ci->platdata->usb_switch); if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_STOPPED_EVENT); diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 9852ec5..209d3f6 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -19,6 +19,7 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg-fsm.h> #include <linux/usb/chipidea.h> +#include <linux/mux/consumer.h> #include "ci.h" #include "udc.h" @@ -1965,16 +1966,26 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) static int udc_id_switch_for_device(struct ci_hdrc *ci) { + int ret = 0; + if (ci->is_otg) /* Clear and enable BSV irq */ hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, OTGSC_BSVIS | OTGSC_BSVIE); - return 0; + if (!ci_otg_is_fsm_mode(ci)) + ret = mux_control_select(ci->platdata->usb_switch, 0); + + if (ci->is_otg && ret) + hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); + + return ret; } static void udc_id_switch_for_host(struct ci_hdrc *ci) { + mux_control_deselect(ci->platdata->usb_switch); + /* * host doesn't care B_SESSION_VALID event * so clear and disbale BSV irq diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 07f9936..9ea55a1 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -10,6 +10,7 @@ #include <linux/usb/otg.h> struct ci_hdrc; +struct mux_control; /** * struct ci_hdrc_cable - structure for external connector cable state tracking @@ -76,6 +77,7 @@ struct ci_hdrc_platform_data { /* VBUS and ID signal state tracking, using extcon framework */ struct ci_hdrc_cable vbus_extcon; struct ci_hdrc_cable id_extcon; + struct mux_control *usb_switch; u32 phy_clkgate_delay_us; };