| Message ID | 1517771702-16984-1-git-send-email-ykaneko0929@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [PATCH/RFT,v4] gpio: gpio-rcar: Support S2RAM | expand |
Hi, > From: Yoshihiro Kaneko, Sent: Monday, February 5, 2018 4:15 AM > > From: Hien Dang <hien.dang.eb@renesas.com> > > This patch adds an implementation that saves and restores the state of > GPIO configuration on suspend and resume. > > Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> > [Modify structure of the bank info to simplify a saving registers] > [Remove DEV_PM_OPS macro] > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> > --- Thank you for the patch. Our team tested this patch and an issue that an SD card detection pin doesn't work after resumed is resolved. So, Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Best regards, Yoshihiro Shimoda > This patch is based on the for-next branch of linux-gpio tree. > > v2 [Yoshihiro Kaneko] > * Modify structure of the bank info as suggested by Geert Uytterhoeven > > v3 [Yoshihiro Kaneko] > * Remove DEV_PM_OPS macro as suggested by Vladimir Zapolskiy > > v4 [Yoshihiro Kaneko] > * As suggested by Geert Uytterhoeven > - make the name of all members of gpio_rcar_bank_info accord with the > name of the registers > - fix type of the 'offset' variable in unsigned int > - fix the inverted logic in gpio_rcar_resume() > > drivers/gpio/gpio-rcar.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c > index e76de57..e5b0dbe 100644 > --- a/drivers/gpio/gpio-rcar.c > +++ b/drivers/gpio/gpio-rcar.c > @@ -31,6 +31,16 @@ > #include <linux/spinlock.h> > #include <linux/slab.h> > > +struct gpio_rcar_bank_info { > + u32 iointsel; > + u32 inoutsel; > + u32 outdt; > + u32 posneg; > + u32 edglevel; > + u32 bothedge; > + u32 intmsk; > +}; > + > struct gpio_rcar_priv { > void __iomem *base; > spinlock_t lock; > @@ -41,6 +51,7 @@ struct gpio_rcar_priv { > unsigned int irq_parent; > bool has_both_edge_trigger; > bool needs_clk; > + struct gpio_rcar_bank_info bank_info; > }; > > #define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ > @@ -531,11 +542,66 @@ static int gpio_rcar_remove(struct platform_device *pdev) > return 0; > } > > +#ifdef CONFIG_PM_SLEEP > +static int gpio_rcar_suspend(struct device *dev) > +{ > + struct gpio_rcar_priv *p = dev_get_drvdata(dev); > + > + p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL); > + p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL); > + p->bank_info.outdt = gpio_rcar_read(p, OUTDT); > + p->bank_info.intmsk = gpio_rcar_read(p, INTMSK); > + p->bank_info.posneg = gpio_rcar_read(p, POSNEG); > + p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL); > + if (p->has_both_edge_trigger) > + p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE); > + > + return 0; > +} > + > +static int gpio_rcar_resume(struct device *dev) > +{ > + struct gpio_rcar_priv *p = dev_get_drvdata(dev); > + unsigned int offset; > + u32 mask; > + > + for (offset = 0; offset < p->gpio_chip.ngpio; offset++) { > + mask = BIT(offset); > + /* I/O pin */ > + if (!(p->bank_info.iointsel & mask)) { > + if (p->bank_info.inoutsel & mask) > + gpio_rcar_direction_output( > + &p->gpio_chip, offset, > + !!(p->bank_info.outdt & mask)); > + else > + gpio_rcar_direction_input(&p->gpio_chip, > + offset); > + } else { > + /* Interrupt pin */ > + gpio_rcar_config_interrupt_input_mode( > + p, > + offset, > + !(p->bank_info.posneg & mask), > + !(p->bank_info.edglevel & mask), > + !!(p->bank_info.bothedge & mask)); > + > + if (p->bank_info.intmsk & mask) > + gpio_rcar_write(p, MSKCLR, mask); > + } > + } > + > + return 0; > +} > +#endif /* CONFIG_PM_SLEEP*/ > + > +static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume); > + > static struct platform_driver gpio_rcar_device_driver = { > .probe = gpio_rcar_probe, > .remove = gpio_rcar_remove, > .driver = { > .name = "gpio_rcar", > + .pm = &gpio_rcar_pm_ops, > .of_match_table = of_match_ptr(gpio_rcar_of_table), > } > }; > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-gpio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 14, 2018 at 05:27:39AM +0000, Yoshihiro Shimoda wrote: > Hi, > > > From: Yoshihiro Kaneko, Sent: Monday, February 5, 2018 4:15 AM > > > > From: Hien Dang <hien.dang.eb@renesas.com> > > > > This patch adds an implementation that saves and restores the state of > > GPIO configuration on suspend and resume. > > > > Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> > > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> > > [Modify structure of the bank info to simplify a saving registers] > > [Remove DEV_PM_OPS macro] > > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> > > --- > > Thank you for the patch. Our team tested this patch and > an issue that an SD card detection pin doesn't work after resumed is resolved. > So, > > Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Thanks for testing! Reviewed-by: Simon Horman <horms+renesas@verge.net.au> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Feb 4, 2018 at 8:15 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote: > From: Hien Dang <hien.dang.eb@renesas.com> > > This patch adds an implementation that saves and restores the state of > GPIO configuration on suspend and resume. > > Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> > [Modify structure of the bank info to simplify a saving registers] > [Remove DEV_PM_OPS macro] > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> This v4 version applied with Tested- and reviewed tags. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Feb 22, 2018 at 03:51:27PM +0100, Linus Walleij wrote: > On Sun, Feb 4, 2018 at 8:15 PM, Yoshihiro Kaneko <ykaneko0929@gmail.com> wrote: > > > From: Hien Dang <hien.dang.eb@renesas.com> > > > > This patch adds an implementation that saves and restores the state of > > GPIO configuration on suspend and resume. > > > > Signed-off-by: Hien Dang <hien.dang.eb@renesas.com> > > Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> > > [Modify structure of the bank info to simplify a saving registers] > > [Remove DEV_PM_OPS macro] > > Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> > > This v4 version applied with Tested- and reviewed tags. Excellent, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index e76de57..e5b0dbe 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -31,6 +31,16 @@ #include <linux/spinlock.h> #include <linux/slab.h> +struct gpio_rcar_bank_info { + u32 iointsel; + u32 inoutsel; + u32 outdt; + u32 posneg; + u32 edglevel; + u32 bothedge; + u32 intmsk; +}; + struct gpio_rcar_priv { void __iomem *base; spinlock_t lock; @@ -41,6 +51,7 @@ struct gpio_rcar_priv { unsigned int irq_parent; bool has_both_edge_trigger; bool needs_clk; + struct gpio_rcar_bank_info bank_info; }; #define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ @@ -531,11 +542,66 @@ static int gpio_rcar_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpio_rcar_suspend(struct device *dev) +{ + struct gpio_rcar_priv *p = dev_get_drvdata(dev); + + p->bank_info.iointsel = gpio_rcar_read(p, IOINTSEL); + p->bank_info.inoutsel = gpio_rcar_read(p, INOUTSEL); + p->bank_info.outdt = gpio_rcar_read(p, OUTDT); + p->bank_info.intmsk = gpio_rcar_read(p, INTMSK); + p->bank_info.posneg = gpio_rcar_read(p, POSNEG); + p->bank_info.edglevel = gpio_rcar_read(p, EDGLEVEL); + if (p->has_both_edge_trigger) + p->bank_info.bothedge = gpio_rcar_read(p, BOTHEDGE); + + return 0; +} + +static int gpio_rcar_resume(struct device *dev) +{ + struct gpio_rcar_priv *p = dev_get_drvdata(dev); + unsigned int offset; + u32 mask; + + for (offset = 0; offset < p->gpio_chip.ngpio; offset++) { + mask = BIT(offset); + /* I/O pin */ + if (!(p->bank_info.iointsel & mask)) { + if (p->bank_info.inoutsel & mask) + gpio_rcar_direction_output( + &p->gpio_chip, offset, + !!(p->bank_info.outdt & mask)); + else + gpio_rcar_direction_input(&p->gpio_chip, + offset); + } else { + /* Interrupt pin */ + gpio_rcar_config_interrupt_input_mode( + p, + offset, + !(p->bank_info.posneg & mask), + !(p->bank_info.edglevel & mask), + !!(p->bank_info.bothedge & mask)); + + if (p->bank_info.intmsk & mask) + gpio_rcar_write(p, MSKCLR, mask); + } + } + + return 0; +} +#endif /* CONFIG_PM_SLEEP*/ + +static SIMPLE_DEV_PM_OPS(gpio_rcar_pm_ops, gpio_rcar_suspend, gpio_rcar_resume); + static struct platform_driver gpio_rcar_device_driver = { .probe = gpio_rcar_probe, .remove = gpio_rcar_remove, .driver = { .name = "gpio_rcar", + .pm = &gpio_rcar_pm_ops, .of_match_table = of_match_ptr(gpio_rcar_of_table), } };