diff mbox series

[v4,2/9] util: Introduce vfio helpers

Message ID 20180110091846.10699-3-famz@redhat.com
State New
Headers show
Series block: Add VFIO based driver for NVMe device | expand

Commit Message

Fam Zheng Jan. 10, 2018, 9:18 a.m. UTC
This is a library to manage the host vfio interface, which could be used
to implement userspace device driver code in QEMU such as NVMe or net
controllers.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 include/qemu/vfio-helpers.h |  30 ++
 util/Makefile.objs          |   1 +
 util/trace-events           |  11 +
 util/vfio-helpers.c         | 723 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 765 insertions(+)
 create mode 100644 include/qemu/vfio-helpers.h
 create mode 100644 util/vfio-helpers.c

Comments

Stefan Hajnoczi Jan. 10, 2018, 4:52 p.m. UTC | #1
On Wed, Jan 10, 2018 at 05:18:39PM +0800, Fam Zheng wrote:
> +/* Map [host, host + size) area into a contiguous IOVA address space, and store
> + * the result in @iova if not NULL. The caller need to make sure the area is
> + * aligned to page size, and mustn't overlap with existing mapping areas (split
> + * mapping status within this area is not allowed).
> + */
> +int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size,
> +                      bool temporary, uint64_t *iova)
> +{
> +    int ret = 0;
> +    int index;
> +    IOVAMapping *mapping;
> +    uint64_t iova0;
> +
> +    assert(QEMU_PTR_IS_ALIGNED(host, getpagesize()));
> +    assert(QEMU_IS_ALIGNED(size, getpagesize()));
> +    trace_qemu_vfio_dma_map(s, host, size, temporary, iova);
> +    qemu_mutex_lock(&s->lock);
> +    mapping = qemu_vfio_find_mapping(s, host, &index);
> +    if (mapping) {
> +        iova0 = mapping->iova + ((uint8_t *)host - (uint8_t *)mapping->host);
> +    } else {
> +        if (s->high_water_mark - s->low_water_mark + 1 < size) {
> +            ret = -ENOMEM;
> +            goto out;
> +        }
> +        if (!temporary) {
> +            iova0 = s->low_water_mark;
> +            mapping = qemu_vfio_add_mapping(s, host, size, index + 1, iova0);
> +            if (!mapping) {
> +                ret = -ENOMEM;
> +                goto out;
> +            }
> +            assert(qemu_vfio_verify_mappings(s));
> +            ret = qemu_vfio_do_mapping(s, host, size, iova0);
> +            if (ret) {
> +                qemu_vfio_undo_mapping(s, mapping, NULL);
> +                goto out;
> +            }
> +            s->low_water_mark += size;
> +            qemu_vfio_dump_mappings(s);
> +        } else {
> +            iova0 = s->high_water_mark - size;
> +            ret = qemu_vfio_do_mapping(s, host, size, iova0);
> +            if (ret) {
> +                goto out;
> +            }
> +            s->high_water_mark -= size;
> +        }
> +    }
> +    if (iova) {
> +        *iova = iova0;
> +    }
> +    qemu_mutex_unlock(&s->lock);
> +out:

Unlock needs to be here to avoid leaking the lock.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Alex Williamson Jan. 10, 2018, 8:09 p.m. UTC | #2
On Wed, 10 Jan 2018 17:18:39 +0800
Fam Zheng <famz@redhat.com> wrote:

> This is a library to manage the host vfio interface, which could be used
> to implement userspace device driver code in QEMU such as NVMe or net
> controllers.
> 
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
>  include/qemu/vfio-helpers.h |  30 ++
>  util/Makefile.objs          |   1 +
>  util/trace-events           |  11 +
>  util/vfio-helpers.c         | 723 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 765 insertions(+)
>  create mode 100644 include/qemu/vfio-helpers.h
>  create mode 100644 util/vfio-helpers.c
> 
> diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
> new file mode 100644
> index 0000000000..6bdba3b66e
> --- /dev/null
> +++ b/include/qemu/vfio-helpers.h
...
> +/**
> + * Map a PCI bar area.
> + */
> +void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, Error **errp)
> +{
> +    void *p;
> +    assert_bar_index_valid(s, index);
> +    p = mmap(NULL, MIN(8192, s->bar_region_info[index].size),
> +             PROT_READ | PROT_WRITE, MAP_SHARED,
> +             s->device, s->bar_region_info[index].offset);
> +    if (p == MAP_FAILED) {
> +        error_setg_errno(errp, errno, "Failed to map BAR region");
> +        p = NULL;
> +    }
> +    return p;
> +}
> +
> +/**
> + * Unmap a PCI bar area.
> + */
> +void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar)
> +{
> +    if (bar) {
> +        munmap(bar, MIN(8192, s->bar_region_info[index].size));
> +    }
> +}

What's up with this 8KB thing?  Is it perhaps a hack to avoid
un-mmap'able MSI-X sections of the BAR, which would make this general
purpose library very specific to devices which only operate in the lower
8KB of their MMIO space.  Maybe the interface should have an offset and
size so that the NVMe driver could implement that dependency.  We could
also be testing if the region supports mmap, but I suppose trying and
failing is just as good.  Thanks,

Alex
Fam Zheng Jan. 12, 2018, 1:28 a.m. UTC | #3
On Wed, 01/10 16:52, Stefan Hajnoczi wrote:
> On Wed, Jan 10, 2018 at 05:18:39PM +0800, Fam Zheng wrote:
> > +/* Map [host, host + size) area into a contiguous IOVA address space, and store
> > + * the result in @iova if not NULL. The caller need to make sure the area is
> > + * aligned to page size, and mustn't overlap with existing mapping areas (split
> > + * mapping status within this area is not allowed).
> > + */
> > +int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size,
> > +                      bool temporary, uint64_t *iova)
> > +{
> > +    int ret = 0;
> > +    int index;
> > +    IOVAMapping *mapping;
> > +    uint64_t iova0;
> > +
> > +    assert(QEMU_PTR_IS_ALIGNED(host, getpagesize()));
> > +    assert(QEMU_IS_ALIGNED(size, getpagesize()));
> > +    trace_qemu_vfio_dma_map(s, host, size, temporary, iova);
> > +    qemu_mutex_lock(&s->lock);
> > +    mapping = qemu_vfio_find_mapping(s, host, &index);
> > +    if (mapping) {
> > +        iova0 = mapping->iova + ((uint8_t *)host - (uint8_t *)mapping->host);
> > +    } else {
> > +        if (s->high_water_mark - s->low_water_mark + 1 < size) {
> > +            ret = -ENOMEM;
> > +            goto out;
> > +        }
> > +        if (!temporary) {
> > +            iova0 = s->low_water_mark;
> > +            mapping = qemu_vfio_add_mapping(s, host, size, index + 1, iova0);
> > +            if (!mapping) {
> > +                ret = -ENOMEM;
> > +                goto out;
> > +            }
> > +            assert(qemu_vfio_verify_mappings(s));
> > +            ret = qemu_vfio_do_mapping(s, host, size, iova0);
> > +            if (ret) {
> > +                qemu_vfio_undo_mapping(s, mapping, NULL);
> > +                goto out;
> > +            }
> > +            s->low_water_mark += size;
> > +            qemu_vfio_dump_mappings(s);
> > +        } else {
> > +            iova0 = s->high_water_mark - size;
> > +            ret = qemu_vfio_do_mapping(s, host, size, iova0);
> > +            if (ret) {
> > +                goto out;
> > +            }
> > +            s->high_water_mark -= size;
> > +        }
> > +    }
> > +    if (iova) {
> > +        *iova = iova0;
> > +    }
> > +    qemu_mutex_unlock(&s->lock);
> > +out:
> 
> Unlock needs to be here to avoid leaking the lock.

Yes, will fix.

Fam
Fam Zheng Jan. 12, 2018, 1:51 a.m. UTC | #4
On Wed, 01/10 13:09, Alex Williamson wrote:
> On Wed, 10 Jan 2018 17:18:39 +0800
> Fam Zheng <famz@redhat.com> wrote:
> 
> > This is a library to manage the host vfio interface, which could be used
> > to implement userspace device driver code in QEMU such as NVMe or net
> > controllers.
> > 
> > Signed-off-by: Fam Zheng <famz@redhat.com>
> > ---
> >  include/qemu/vfio-helpers.h |  30 ++
> >  util/Makefile.objs          |   1 +
> >  util/trace-events           |  11 +
> >  util/vfio-helpers.c         | 723 ++++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 765 insertions(+)
> >  create mode 100644 include/qemu/vfio-helpers.h
> >  create mode 100644 util/vfio-helpers.c
> > 
> > diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
> > new file mode 100644
> > index 0000000000..6bdba3b66e
> > --- /dev/null
> > +++ b/include/qemu/vfio-helpers.h
> ...
> > +/**
> > + * Map a PCI bar area.
> > + */
> > +void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, Error **errp)
> > +{
> > +    void *p;
> > +    assert_bar_index_valid(s, index);
> > +    p = mmap(NULL, MIN(8192, s->bar_region_info[index].size),
> > +             PROT_READ | PROT_WRITE, MAP_SHARED,
> > +             s->device, s->bar_region_info[index].offset);
> > +    if (p == MAP_FAILED) {
> > +        error_setg_errno(errp, errno, "Failed to map BAR region");
> > +        p = NULL;
> > +    }
> > +    return p;
> > +}
> > +
> > +/**
> > + * Unmap a PCI bar area.
> > + */
> > +void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar)
> > +{
> > +    if (bar) {
> > +        munmap(bar, MIN(8192, s->bar_region_info[index].size));
> > +    }
> > +}
> 
> What's up with this 8KB thing?  Is it perhaps a hack to avoid
> un-mmap'able MSI-X sections of the BAR, which would make this general
> purpose library very specific to devices which only operate in the lower
> 8KB of their MMIO space.  Maybe the interface should have an offset and
> size so that the NVMe driver could implement that dependency.  We could
> also be testing if the region supports mmap, but I suppose trying and
> failing is just as good.  Thanks,

Sounds good, will add the offset and size parameters.

Fam
diff mbox series

Patch

diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
new file mode 100644
index 0000000000..6bdba3b66e
--- /dev/null
+++ b/include/qemu/vfio-helpers.h
@@ -0,0 +1,30 @@ 
+/*
+ * QEMU VFIO helpers
+ *
+ * Copyright 2016 - 2018 Red Hat, Inc.
+ *
+ * Authors:
+ *   Fam Zheng <famz@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_VFIO_HELPERS_H
+#define QEMU_VFIO_HELPERS_H
+#include "qemu/typedefs.h"
+
+typedef struct QEMUVFIOState QEMUVFIOState;
+
+QEMUVFIOState *qemu_vfio_open_pci(const char *device, Error **errp);
+void qemu_vfio_close(QEMUVFIOState *s);
+int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size,
+                      bool temporary, uint64_t *iova_list);
+int qemu_vfio_dma_reset_temporary(QEMUVFIOState *s);
+void qemu_vfio_dma_unmap(QEMUVFIOState *s, void *host);
+void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, Error **errp);
+void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar);
+int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
+                           int irq_type, Error **errp);
+
+#endif
diff --git a/util/Makefile.objs b/util/Makefile.objs
index 2973b0a323..3fb611631f 100644
--- a/util/Makefile.objs
+++ b/util/Makefile.objs
@@ -46,3 +46,4 @@  util-obj-y += qht.o
 util-obj-y += range.o
 util-obj-y += stats64.o
 util-obj-y += systemd.o
+util-obj-$(CONFIG_LINUX) += vfio-helpers.o
diff --git a/util/trace-events b/util/trace-events
index 025499f83f..2f57bf2337 100644
--- a/util/trace-events
+++ b/util/trace-events
@@ -59,3 +59,14 @@  lockcnt_futex_wake(const void *lockcnt) "lockcnt %p waking up one waiter"
 # util/qemu-thread-posix.c
 qemu_mutex_locked(void *lock) "locked mutex %p"
 qemu_mutex_unlocked(void *lock) "unlocked mutex %p"
+
+# util/vfio-helpers.c
+qemu_vfio_dma_reset_temporary(void *s) "s %p"
+qemu_vfio_ram_block_added(void *s, void *p, size_t size) "s %p host %p size 0x%zx"
+qemu_vfio_ram_block_removed(void *s, void *p, size_t size) "s %p host %p size 0x%zx"
+qemu_vfio_find_mapping(void *s, void *p) "s %p host %p"
+qemu_vfio_new_mapping(void *s, void *host, size_t size, int index, uint64_t iova) "s %p host %p size %zu index %d iova 0x%"PRIx64
+qemu_vfio_do_mapping(void *s, void *host, size_t size, uint64_t iova) "s %p host %p size %zu iova 0x%"PRIx64
+qemu_vfio_dma_map(void *s, void *host, size_t size, bool temporary, uint64_t *iova) "s %p host %p size %zu temporary %d iova %p"
+qemu_vfio_dma_map_invalid(void *s, void *mapping_host, size_t mapping_size, void *host, size_t size) "s %p mapping %p %zu requested %p %zu"
+qemu_vfio_dma_unmap(void *s, void *host) "s %p host %p"
diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
new file mode 100644
index 0000000000..b5df67a737
--- /dev/null
+++ b/util/vfio-helpers.c
@@ -0,0 +1,723 @@ 
+/*
+ * VFIO utility
+ *
+ * Copyright 2016 - 2018 Red Hat, Inc.
+ *
+ * Authors:
+ *   Fam Zheng <famz@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include <sys/ioctl.h>
+#include <linux/vfio.h>
+#include "qapi/error.h"
+#include "exec/ramlist.h"
+#include "exec/cpu-common.h"
+#include "trace.h"
+#include "qemu/queue.h"
+#include "qemu/error-report.h"
+#include "standard-headers/linux/pci_regs.h"
+#include "qemu/event_notifier.h"
+#include "qemu/vfio-helpers.h"
+#include "trace.h"
+
+#define QEMU_VFIO_DEBUG 0
+
+#define QEMU_VFIO_IOVA_MIN 0x10000ULL
+/* XXX: Once VFIO exposes the iova bit width in the IOMMU capability interface,
+ * we can use a runtime limit; alternatively it's also possible to do platform
+ * specific detection by reading sysfs entries. Until then, 39 is a safe bet.
+ **/
+#define QEMU_VFIO_IOVA_MAX (1ULL << 39)
+
+typedef struct {
+    /* Page aligned addr. */
+    void *host;
+    size_t size;
+    uint64_t iova;
+} IOVAMapping;
+
+struct QEMUVFIOState {
+    QemuMutex lock;
+
+    /* These fields are protected by BQL */
+    int container;
+    int group;
+    int device;
+    RAMBlockNotifier ram_notifier;
+    struct vfio_region_info config_region_info, bar_region_info[6];
+
+    /* These fields are protected by @lock */
+    /* VFIO's IO virtual address space is managed by splitting into a few
+     * sections:
+     *
+     * ---------------       <= 0
+     * |xxxxxxxxxxxxx|
+     * |-------------|       <= QEMU_VFIO_IOVA_MIN
+     * |             |
+     * |    Fixed    |
+     * |             |
+     * |-------------|       <= low_water_mark
+     * |             |
+     * |    Free     |
+     * |             |
+     * |-------------|       <= high_water_mark
+     * |             |
+     * |    Temp     |
+     * |             |
+     * |-------------|       <= QEMU_VFIO_IOVA_MAX
+     * |xxxxxxxxxxxxx|
+     * |xxxxxxxxxxxxx|
+     * ---------------
+     *
+     * - Addresses lower than QEMU_VFIO_IOVA_MIN are reserved as invalid;
+     *
+     * - Fixed mappings of HVAs are assigned "low" IOVAs in the range of
+     *   [QEMU_VFIO_IOVA_MIN, low_water_mark).  Once allocated they will not be
+     *   reclaimed - low_water_mark never shrinks;
+     *
+     * - IOVAs in range [low_water_mark, high_water_mark) are free;
+     *
+     * - IOVAs in range [high_water_mark, QEMU_VFIO_IOVA_MAX) are volatile
+     *   mappings. At each qemu_vfio_dma_reset_temporary() call, the whole area
+     *   is recycled. The caller should make sure I/O's depending on these
+     *   mappings are completed before calling.
+     **/
+    uint64_t low_water_mark;
+    uint64_t high_water_mark;
+    IOVAMapping *mappings;
+    int nr_mappings;
+};
+
+/**
+ * Find group file by PCI device address as specified @device, and return the
+ * path. The returned string is owned by caller and should be g_free'ed later.
+ */
+static char *sysfs_find_group_file(const char *device, Error **errp)
+{
+    char *sysfs_link;
+    char *sysfs_group;
+    char *p;
+    char *path = NULL;
+
+    sysfs_link = g_strdup_printf("/sys/bus/pci/devices/%s/iommu_group", device);
+    sysfs_group = g_malloc(PATH_MAX);
+    if (readlink(sysfs_link, sysfs_group, PATH_MAX - 1) == -1) {
+        error_setg_errno(errp, errno, "Failed to find iommu group sysfs path");
+        goto out;
+    }
+    p = strrchr(sysfs_group, '/');
+    if (!p) {
+        error_setg(errp, "Failed to find iommu group number");
+        goto out;
+    }
+
+    path = g_strdup_printf("/dev/vfio/%s", p + 1);
+out:
+    g_free(sysfs_link);
+    g_free(sysfs_group);
+    return path;
+}
+
+static inline void assert_bar_index_valid(QEMUVFIOState *s, int index)
+{
+    assert(index >= 0 && index < ARRAY_SIZE(s->bar_region_info));
+}
+
+static int qemu_vfio_pci_init_bar(QEMUVFIOState *s, int index, Error **errp)
+{
+    assert_bar_index_valid(s, index);
+    s->bar_region_info[index] = (struct vfio_region_info) {
+        .index = VFIO_PCI_BAR0_REGION_INDEX + index,
+        .argsz = sizeof(struct vfio_region_info),
+    };
+    if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->bar_region_info[index])) {
+        error_setg_errno(errp, errno, "Failed to get BAR region info");
+        return -errno;
+    }
+
+    return 0;
+}
+
+/**
+ * Map a PCI bar area.
+ */
+void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, Error **errp)
+{
+    void *p;
+    assert_bar_index_valid(s, index);
+    p = mmap(NULL, MIN(8192, s->bar_region_info[index].size),
+             PROT_READ | PROT_WRITE, MAP_SHARED,
+             s->device, s->bar_region_info[index].offset);
+    if (p == MAP_FAILED) {
+        error_setg_errno(errp, errno, "Failed to map BAR region");
+        p = NULL;
+    }
+    return p;
+}
+
+/**
+ * Unmap a PCI bar area.
+ */
+void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar)
+{
+    if (bar) {
+        munmap(bar, MIN(8192, s->bar_region_info[index].size));
+    }
+}
+
+/**
+ * Initialize device IRQ with @irq_type and and register an event notifier.
+ */
+int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
+                           int irq_type, Error **errp)
+{
+    int r;
+    struct vfio_irq_set *irq_set;
+    size_t irq_set_size;
+    struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info) };
+
+    irq_info.index = irq_type;
+    if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) {
+        error_setg_errno(errp, errno, "Failed to get device interrupt info");
+        return -errno;
+    }
+    if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
+        error_setg(errp, "Device interrupt doesn't support eventfd");
+        return -EINVAL;
+    }
+
+    irq_set_size = sizeof(*irq_set) + sizeof(int);
+    irq_set = g_malloc0(irq_set_size);
+
+    /* Get to a known IRQ state */
+    *irq_set = (struct vfio_irq_set) {
+        .argsz = irq_set_size,
+        .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER,
+        .index = irq_info.index,
+        .start = 0,
+        .count = 1,
+    };
+
+    *(int *)&irq_set->data = event_notifier_get_fd(e);
+    r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set);
+    g_free(irq_set);
+    if (r) {
+        error_setg_errno(errp, errno, "Failed to setup device interrupt");
+        return -errno;
+    }
+    return 0;
+}
+
+static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf,
+                                     int size, int ofs)
+{
+    int ret;
+
+    do {
+        ret = pread(s->device, buf, size, s->config_region_info.offset + ofs);
+    } while (ret == -1 && errno == EINTR);
+    return ret == size ? 0 : -errno;
+}
+
+static int qemu_vfio_pci_write_config(QEMUVFIOState *s, void *buf, int size, int ofs)
+{
+    int ret;
+
+    do {
+        ret = pwrite(s->device, buf, size, s->config_region_info.offset + ofs);
+    } while (ret == -1 && errno == EINTR);
+    return ret == size ? 0 : -errno;
+}
+
+static int qemu_vfio_init_pci(QEMUVFIOState *s, const char *device,
+                              Error **errp)
+{
+    int ret;
+    int i;
+    uint16_t pci_cmd;
+    struct vfio_group_status group_status = { .argsz = sizeof(group_status) };
+    struct vfio_iommu_type1_info iommu_info = { .argsz = sizeof(iommu_info) };
+    struct vfio_device_info device_info = { .argsz = sizeof(device_info) };
+    char *group_file = NULL;
+
+    /* Create a new container */
+    s->container = open("/dev/vfio/vfio", O_RDWR);
+
+    if (s->container == -1) {
+        error_setg_errno(errp, errno, "Failed to open /dev/vfio/vfio");
+        return -errno;
+    }
+    if (ioctl(s->container, VFIO_GET_API_VERSION) != VFIO_API_VERSION) {
+        error_setg(errp, "Invalid VFIO version");
+        ret = -EINVAL;
+        goto fail_container;
+    }
+
+    if (!ioctl(s->container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) {
+        error_setg_errno(errp, errno, "VFIO IOMMU check failed");
+        ret = -EINVAL;
+        goto fail_container;
+    }
+
+    /* Open the group */
+    group_file = sysfs_find_group_file(device, errp);
+    if (!group_file) {
+        ret = -EINVAL;
+        goto fail_container;
+    }
+
+    s->group = open(group_file, O_RDWR);
+    if (s->group == -1) {
+        error_setg_errno(errp, errno, "Failed to open VFIO group file: %s",
+                         group_file);
+        g_free(group_file);
+        ret = -errno;
+        goto fail_container;
+    }
+    g_free(group_file);
+
+    /* Test the group is viable and available */
+    if (ioctl(s->group, VFIO_GROUP_GET_STATUS, &group_status)) {
+        error_setg_errno(errp, errno, "Failed to get VFIO group status");
+        ret = -errno;
+        goto fail;
+    }
+
+    if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) {
+        error_setg(errp, "VFIO group is not viable");
+        ret = -EINVAL;
+        goto fail;
+    }
+
+    /* Add the group to the container */
+    if (ioctl(s->group, VFIO_GROUP_SET_CONTAINER, &s->container)) {
+        error_setg_errno(errp, errno, "Failed to add group to VFIO container");
+        ret = -errno;
+        goto fail;
+    }
+
+    /* Enable the IOMMU model we want */
+    if (ioctl(s->container, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU)) {
+        error_setg_errno(errp, errno, "Failed to set VFIO IOMMU type");
+        ret = -errno;
+        goto fail;
+    }
+
+    /* Get additional IOMMU info */
+    if (ioctl(s->container, VFIO_IOMMU_GET_INFO, &iommu_info)) {
+        error_setg_errno(errp, errno, "Failed to get IOMMU info");
+        ret = -errno;
+        goto fail;
+    }
+
+    s->device = ioctl(s->group, VFIO_GROUP_GET_DEVICE_FD, device);
+
+    if (s->device < 0) {
+        error_setg_errno(errp, errno, "Failed to get device fd");
+        ret = -errno;
+        goto fail;
+    }
+
+    /* Test and setup the device */
+    if (ioctl(s->device, VFIO_DEVICE_GET_INFO, &device_info)) {
+        error_setg_errno(errp, errno, "Failed to get device info");
+        ret = -errno;
+        goto fail;
+    }
+
+    if (device_info.num_regions < VFIO_PCI_CONFIG_REGION_INDEX) {
+        error_setg(errp, "Invalid device regions");
+        ret = -EINVAL;
+        goto fail;
+    }
+
+    s->config_region_info = (struct vfio_region_info) {
+        .index = VFIO_PCI_CONFIG_REGION_INDEX,
+        .argsz = sizeof(struct vfio_region_info),
+    };
+    if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->config_region_info)) {
+        error_setg_errno(errp, errno, "Failed to get config region info");
+        ret = -errno;
+        goto fail;
+    }
+
+    for (i = 0; i < 6; i++) {
+        ret = qemu_vfio_pci_init_bar(s, i, errp);
+        if (ret) {
+            goto fail;
+        }
+    }
+
+    /* Enable bus master */
+    ret = qemu_vfio_pci_read_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND);
+    if (ret) {
+        goto fail;
+    }
+    pci_cmd |= PCI_COMMAND_MASTER;
+    ret = qemu_vfio_pci_write_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND);
+    if (ret) {
+        goto fail;
+    }
+    return 0;
+fail:
+    close(s->group);
+fail_container:
+    close(s->container);
+    return ret;
+}
+
+static void qemu_vfio_ram_block_added(RAMBlockNotifier *n,
+                                      void *host, size_t size)
+{
+    QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier);
+    trace_qemu_vfio_ram_block_added(s, host, size);
+    qemu_vfio_dma_map(s, host, size, false, NULL);
+}
+
+static void qemu_vfio_ram_block_removed(RAMBlockNotifier *n,
+                                        void *host, size_t size)
+{
+    QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier);
+    if (host) {
+        trace_qemu_vfio_ram_block_removed(s, host, size);
+        qemu_vfio_dma_unmap(s, host);
+    }
+}
+
+static int qemu_vfio_init_ramblock(const char *block_name, void *host_addr,
+                                   ram_addr_t offset, ram_addr_t length,
+                                   void *opaque)
+{
+    int ret;
+    QEMUVFIOState *s = opaque;
+
+    if (!host_addr) {
+        return 0;
+    }
+    ret = qemu_vfio_dma_map(s, host_addr, length, false, NULL);
+    if (ret) {
+        fprintf(stderr, "qemu_vfio_init_ramblock: failed %p %ld\n",
+                host_addr, length);
+    }
+    return 0;
+}
+
+static void qemu_vfio_open_common(QEMUVFIOState *s)
+{
+    s->ram_notifier.ram_block_added = qemu_vfio_ram_block_added;
+    s->ram_notifier.ram_block_removed = qemu_vfio_ram_block_removed;
+    ram_block_notifier_add(&s->ram_notifier);
+    s->low_water_mark = QEMU_VFIO_IOVA_MIN;
+    s->high_water_mark = QEMU_VFIO_IOVA_MAX;
+    qemu_ram_foreach_block(qemu_vfio_init_ramblock, s);
+    qemu_mutex_init(&s->lock);
+}
+
+/**
+ * Open a PCI device, e.g. "0000:00:01.0".
+ */
+QEMUVFIOState *qemu_vfio_open_pci(const char *device, Error **errp)
+{
+    int r;
+    QEMUVFIOState *s = g_new0(QEMUVFIOState, 1);
+
+    r = qemu_vfio_init_pci(s, device, errp);
+    if (r) {
+        g_free(s);
+        return NULL;
+    }
+    qemu_vfio_open_common(s);
+    return s;
+}
+
+static void qemu_vfio_dump_mapping(IOVAMapping *m)
+{
+    if (QEMU_VFIO_DEBUG) {
+        printf("  vfio mapping %p %lx to %lx\n", m->host, m->size, m->iova);
+    }
+}
+
+static void qemu_vfio_dump_mappings(QEMUVFIOState *s)
+{
+    int i;
+
+    if (QEMU_VFIO_DEBUG) {
+        printf("vfio mappings\n");
+        for (i = 0; i < s->nr_mappings; ++i) {
+            qemu_vfio_dump_mapping(&s->mappings[i]);
+        }
+    }
+}
+
+/**
+ * Find the mapping entry that contains [host, host + size) and set @index to
+ * the position. If no entry contains it, @index is the position _after_ which
+ * to insert the new mapping. IOW, it is the index of the largest element that
+ * is smaller than @host, or -1 if no entry is.
+ */
+static IOVAMapping *qemu_vfio_find_mapping(QEMUVFIOState *s, void *host,
+                                           int *index)
+{
+    IOVAMapping *p = s->mappings;
+    IOVAMapping *q = p ? p + s->nr_mappings - 1 : NULL;
+    IOVAMapping *mid;
+    trace_qemu_vfio_find_mapping(s, host);
+    if (!p) {
+        *index = -1;
+        return NULL;
+    }
+    while (true) {
+        mid = p + (q - p) / 2;
+        if (mid == p) {
+            break;
+        }
+        if (mid->host > host) {
+            q = mid;
+        } else if (mid->host < host) {
+            p = mid;
+        } else {
+            break;
+        }
+    }
+    if (mid->host > host) {
+        mid--;
+    } else if (mid < &s->mappings[s->nr_mappings - 1]
+               && (mid + 1)->host <= host) {
+        mid++;
+    }
+    *index = mid - &s->mappings[0];
+    if (mid >= &s->mappings[0] &&
+        mid->host <= host && mid->host + mid->size > host) {
+        assert(mid < &s->mappings[s->nr_mappings]);
+        return mid;
+    }
+    /* At this point *index + 1 is the right position to insert the new
+     * mapping.*/
+    return NULL;
+}
+
+/**
+ * Allocate IOVA and and create a new mapping record and insert it in @s.
+ */
+static IOVAMapping *qemu_vfio_add_mapping(QEMUVFIOState *s,
+                                          void *host, size_t size,
+                                          int index, uint64_t iova)
+{
+    int shift;
+    IOVAMapping m = {.host = host, .size = size, iova = iova};
+    IOVAMapping *insert;
+
+    assert(QEMU_IS_ALIGNED(size, getpagesize()));
+    assert(QEMU_IS_ALIGNED(s->low_water_mark, getpagesize()));
+    assert(QEMU_IS_ALIGNED(s->high_water_mark, getpagesize()));
+    trace_qemu_vfio_new_mapping(s, host, size, index, iova);
+
+    assert(index >= 0);
+    s->nr_mappings++;
+    s->mappings = g_realloc_n(s->mappings, sizeof(s->mappings[0]),
+                              s->nr_mappings);
+    insert = &s->mappings[index];
+    shift = s->nr_mappings - index - 1;
+    if (shift) {
+        memmove(insert + 1, insert, shift * sizeof(s->mappings[0]));
+    }
+    *insert = m;
+    return insert;
+}
+
+/* Do the DMA mapping with VFIO. */
+static int qemu_vfio_do_mapping(QEMUVFIOState *s, void *host, size_t size,
+                                uint64_t iova)
+{
+    struct vfio_iommu_type1_dma_map dma_map = {
+        .argsz = sizeof(dma_map),
+        .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE,
+        .iova = iova,
+        .vaddr = (uintptr_t)host,
+        .size = size,
+    };
+    trace_qemu_vfio_do_mapping(s, host, size, iova);
+
+    if (ioctl(s->container, VFIO_IOMMU_MAP_DMA, &dma_map)) {
+        error_report("VFIO_MAP_DMA: %d", -errno);
+        return -errno;
+    }
+    return 0;
+}
+
+/**
+ * Undo the DMA mapping from @s with VFIO, and remove from mapping list.
+ */
+static void qemu_vfio_undo_mapping(QEMUVFIOState *s, IOVAMapping *mapping,
+                                   Error **errp)
+{
+    int index;
+    struct vfio_iommu_type1_dma_unmap unmap = {
+        .argsz = sizeof(unmap),
+        .flags = 0,
+        .iova = mapping->iova,
+        .size = mapping->size,
+    };
+
+    index = mapping - s->mappings;
+    assert(mapping->size > 0);
+    assert(QEMU_IS_ALIGNED(mapping->size, getpagesize()));
+    assert(index >= 0 && index < s->nr_mappings);
+    if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
+        error_setg(errp, "VFIO_UNMAP_DMA failed: %d", -errno);
+    }
+    memmove(mapping, &s->mappings[index + 1],
+            sizeof(s->mappings[0]) * (s->nr_mappings - index - 1));
+    s->nr_mappings--;
+    s->mappings = g_realloc_n(s->mappings, sizeof(s->mappings[0]),
+                              s->nr_mappings);
+}
+
+/* Check if the mapping list is (ascending) ordered. */
+static bool qemu_vfio_verify_mappings(QEMUVFIOState *s)
+{
+    int i;
+    if (QEMU_VFIO_DEBUG) {
+        for (i = 0; i < s->nr_mappings - 1; ++i) {
+            if (!(s->mappings[i].host < s->mappings[i + 1].host)) {
+                fprintf(stderr, "item %d not sorted!\n", i);
+                qemu_vfio_dump_mappings(s);
+                return false;
+            }
+            if (!(s->mappings[i].host + s->mappings[i].size <=
+                  s->mappings[i + 1].host)) {
+                fprintf(stderr, "item %d overlap with next!\n", i);
+                qemu_vfio_dump_mappings(s);
+                return false;
+            }
+        }
+    }
+    return true;
+}
+
+/* Map [host, host + size) area into a contiguous IOVA address space, and store
+ * the result in @iova if not NULL. The caller need to make sure the area is
+ * aligned to page size, and mustn't overlap with existing mapping areas (split
+ * mapping status within this area is not allowed).
+ */
+int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size,
+                      bool temporary, uint64_t *iova)
+{
+    int ret = 0;
+    int index;
+    IOVAMapping *mapping;
+    uint64_t iova0;
+
+    assert(QEMU_PTR_IS_ALIGNED(host, getpagesize()));
+    assert(QEMU_IS_ALIGNED(size, getpagesize()));
+    trace_qemu_vfio_dma_map(s, host, size, temporary, iova);
+    qemu_mutex_lock(&s->lock);
+    mapping = qemu_vfio_find_mapping(s, host, &index);
+    if (mapping) {
+        iova0 = mapping->iova + ((uint8_t *)host - (uint8_t *)mapping->host);
+    } else {
+        if (s->high_water_mark - s->low_water_mark + 1 < size) {
+            ret = -ENOMEM;
+            goto out;
+        }
+        if (!temporary) {
+            iova0 = s->low_water_mark;
+            mapping = qemu_vfio_add_mapping(s, host, size, index + 1, iova0);
+            if (!mapping) {
+                ret = -ENOMEM;
+                goto out;
+            }
+            assert(qemu_vfio_verify_mappings(s));
+            ret = qemu_vfio_do_mapping(s, host, size, iova0);
+            if (ret) {
+                qemu_vfio_undo_mapping(s, mapping, NULL);
+                goto out;
+            }
+            s->low_water_mark += size;
+            qemu_vfio_dump_mappings(s);
+        } else {
+            iova0 = s->high_water_mark - size;
+            ret = qemu_vfio_do_mapping(s, host, size, iova0);
+            if (ret) {
+                goto out;
+            }
+            s->high_water_mark -= size;
+        }
+    }
+    if (iova) {
+        *iova = iova0;
+    }
+    qemu_mutex_unlock(&s->lock);
+out:
+    return ret;
+}
+
+/* Reset the high watermark and free all "temporary" mappings. */
+int qemu_vfio_dma_reset_temporary(QEMUVFIOState *s)
+{
+    struct vfio_iommu_type1_dma_unmap unmap = {
+        .argsz = sizeof(unmap),
+        .flags = 0,
+        .iova = s->high_water_mark,
+        .size = QEMU_VFIO_IOVA_MAX - s->high_water_mark,
+    };
+    trace_qemu_vfio_dma_reset_temporary(s);
+    qemu_mutex_lock(&s->lock);
+    if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) {
+        error_report("VFIO_UNMAP_DMA: %d", -errno);
+        qemu_mutex_unlock(&s->lock);
+        return -errno;
+    }
+    s->high_water_mark = QEMU_VFIO_IOVA_MAX;
+    qemu_mutex_unlock(&s->lock);
+    return 0;
+}
+
+/* Unmapping the whole area that was previously mapped with
+ * qemu_vfio_dma_map(). */
+void qemu_vfio_dma_unmap(QEMUVFIOState *s, void *host)
+{
+    int index = 0;
+    IOVAMapping *m;
+
+    if (!host) {
+        return;
+    }
+
+    trace_qemu_vfio_dma_unmap(s, host);
+    qemu_mutex_lock(&s->lock);
+    m = qemu_vfio_find_mapping(s, host, &index);
+    if (!m) {
+        goto out;
+    }
+    qemu_vfio_undo_mapping(s, m, NULL);
+out:
+    qemu_mutex_unlock(&s->lock);
+}
+
+static void qemu_vfio_reset(QEMUVFIOState *s)
+{
+    ioctl(s->device, VFIO_DEVICE_RESET);
+}
+
+/* Close and free the VFIO resources. */
+void qemu_vfio_close(QEMUVFIOState *s)
+{
+    int i;
+
+    if (!s) {
+        return;
+    }
+    for (i = 0; i < s->nr_mappings; ++i) {
+        qemu_vfio_undo_mapping(s, &s->mappings[i], NULL);
+    }
+    ram_block_notifier_remove(&s->ram_notifier);
+    qemu_vfio_reset(s);
+    close(s->device);
+    close(s->group);
+    close(s->container);
+}