diff mbox series

[qemu,v3] RFC: ppc/spapr: Receive and store device tree blob from SLOF

Message ID 20171016052004.31397-1-aik@ozlabs.ru
State Not Applicable
Headers show
Series [qemu,v3] RFC: ppc/spapr: Receive and store device tree blob from SLOF | expand

Commit Message

Alexey Kardashevskiy Oct. 16, 2017, 5:20 a.m. UTC
SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS and QEMU implements it,
it makes sense to pass the SLOF device tree to QEMU so the latter could
implement RTAS related tasks better.

Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).

This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.

This implements a basic FDT header validity check of the new blob;
the new blob size should not increase more than twice since the reset.

This adds a machine property - update_dt_enabled - to allow backward
migration.

This requires SLOF update: "fdt: Pass the resulting device tree to QEMU".

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
Changes:
v3:
* store reset-time FDT blob size and compare the update size against it;
this disallows more than 2x increase between resets
* added some FDT header sanity checks
* implemented migration

---
I could store just a size of the QEMU's blob, or a tree, not sure
which one makes more sense here.

This allows up to 2 times blob increase. Not 1.5 just to avoid
float/double, just looks a bit ugly imho.
---
 include/hw/ppc/spapr.h |  7 ++++++-
 hw/ppc/spapr.c         | 31 ++++++++++++++++++++++++++++++-
 hw/ppc/spapr_hcall.c   | 42 ++++++++++++++++++++++++++++++++++++++++++
 hw/ppc/trace-events    |  2 ++
 4 files changed, 80 insertions(+), 2 deletions(-)

Comments

David Gibson Oct. 16, 2017, 9:36 a.m. UTC | #1
On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy wrote:
> SLOF receives a device tree and updates it with various properties
> before switching to the guest kernel and QEMU is not aware of any changes
> made by SLOF. Since there is no real RTAS and QEMU implements it,
> it makes sense to pass the SLOF device tree to QEMU so the latter could
> implement RTAS related tasks better.
> 
> Specifially, now QEMU can find out the actual XICS phandle (for PHB
> hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
> assisted NMI - FWNMI).
> 
> This stores the initial DT blob in the sPAPR machine and replaces it
> in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
> 
> This implements a basic FDT header validity check of the new blob;
> the new blob size should not increase more than twice since the reset.
> 
> This adds a machine property - update_dt_enabled - to allow backward
> migration.
> 
> This requires SLOF update: "fdt: Pass the resulting device tree to QEMU".
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> Changes:
> v3:
> * store reset-time FDT blob size and compare the update size against it;
> this disallows more than 2x increase between resets
> * added some FDT header sanity checks
> * implemented migration
> 
> ---
> I could store just a size of the QEMU's blob, or a tree, not sure
> which one makes more sense here.
> 
> This allows up to 2 times blob increase. Not 1.5 just to avoid
> float/double, just looks a bit ugly imho.
> ---
>  include/hw/ppc/spapr.h |  7 ++++++-
>  hw/ppc/spapr.c         | 31 ++++++++++++++++++++++++++++++-
>  hw/ppc/spapr_hcall.c   | 42 ++++++++++++++++++++++++++++++++++++++++++
>  hw/ppc/trace-events    |  2 ++
>  4 files changed, 80 insertions(+), 2 deletions(-)
> 
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index c1b365f564..a9ccc14823 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -60,6 +60,7 @@ struct sPAPRMachineClass {
>      /*< public >*/
>      bool dr_lmb_enabled;       /* enable dynamic-reconfig/hotplug of LMBs */
>      bool use_ohci_by_default;  /* use USB-OHCI instead of XHCI */
> +    bool update_dt_enabled;    /* enable KVMPPC_H_UPDATE_DT */
>      const char *tcg_default_cpu; /* which (TCG) CPU to simulate by default */
>      bool pre_2_10_has_unused_icps;
>      void (*phb_placement)(sPAPRMachineState *spapr, uint32_t index,
> @@ -92,6 +93,9 @@ struct sPAPRMachineState {
>      int vrma_adjust;
>      ssize_t rtas_size;
>      void *rtas_blob;
> +    uint32_t fdt_size;
> +    uint32_t fdt_initial_size;
> +    void *fdt_blob;
>      long kernel_size;
>      bool kernel_le;
>      uint32_t initrd_base;
> @@ -400,7 +404,8 @@ struct sPAPRMachineState {
>  #define KVMPPC_H_LOGICAL_MEMOP  (KVMPPC_HCALL_BASE + 0x1)
>  /* Client Architecture support */
>  #define KVMPPC_H_CAS            (KVMPPC_HCALL_BASE + 0x2)
> -#define KVMPPC_HCALL_MAX        KVMPPC_H_CAS
> +#define KVMPPC_H_UPDATE_DT      (KVMPPC_HCALL_BASE + 0x3)
> +#define KVMPPC_HCALL_MAX        KVMPPC_H_UPDATE_DT
>  
>  typedef struct sPAPRDeviceTreeUpdateHeader {
>      uint32_t version_id;
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index ff87f155d5..cb7bcc851e 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -1467,7 +1467,10 @@ static void ppc_spapr_reset(void)
>      /* Load the fdt */
>      qemu_fdt_dumpdtb(fdt, fdt_totalsize(fdt));
>      cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
> -    g_free(fdt);
> +    g_free(spapr->fdt_blob);
> +    spapr->fdt_size = fdt_totalsize(fdt);
> +    spapr->fdt_initial_size = spapr->fdt_size;
> +    spapr->fdt_blob = fdt;
>  
>      /* Set up the entry state */
>      first_ppc_cpu = POWERPC_CPU(first_cpu);
> @@ -1675,6 +1678,27 @@ static const VMStateDescription vmstate_spapr_patb_entry = {
>      },
>  };
>  
> +static bool spapr_dtb_needed(void *opaque)
> +{
> +    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(opaque);
> +
> +    return smc->update_dt_enabled;
> +}
> +
> +static const VMStateDescription vmstate_spapr_dtb = {
> +    .name = "spapr_dtb",
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .needed = spapr_dtb_needed,
> +    .fields = (VMStateField[]) {
> +        VMSTATE_UINT32(fdt_initial_size, sPAPRMachineState),

I'm not sure you need to migrate initial size.  The destination can
work this out itself.. unless we skip the reset when we have an
incoming migration, I'm not sure.

> +        VMSTATE_UINT32(fdt_size, sPAPRMachineState),
> +        VMSTATE_VBUFFER_ALLOC_UINT32(fdt_blob, sPAPRMachineState, 0, NULL,
> +                                     fdt_size),
> +        VMSTATE_END_OF_LIST()
> +    },
> +};
> +
>  static const VMStateDescription vmstate_spapr = {
>      .name = "spapr",
>      .version_id = 3,
> @@ -1694,6 +1718,7 @@ static const VMStateDescription vmstate_spapr = {
>          &vmstate_spapr_ov5_cas,
>          &vmstate_spapr_patb_entry,
>          &vmstate_spapr_pending_events,
> +        &vmstate_spapr_dtb,
>          NULL
>      }
>  };
> @@ -3605,6 +3630,7 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data)
>      hc->unplug_request = spapr_machine_device_unplug_request;
>  
>      smc->dr_lmb_enabled = true;
> +    smc->update_dt_enabled = true;
>      smc->tcg_default_cpu = "POWER8";
>      mc->has_hotpluggable_cpus = true;
>      smc->resize_hpt_default = SPAPR_RESIZE_HPT_ENABLED;
> @@ -3703,7 +3729,10 @@ static void spapr_machine_2_10_instance_options(MachineState *machine)
>  
>  static void spapr_machine_2_10_class_options(MachineClass *mc)
>  {
> +    sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
> +
>      spapr_machine_2_11_class_options(mc);
> +    smc->update_dt_enabled = false;
>      SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_10);
>  }
>  
> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
> index 8d72bb7c1c..be3de41080 100644
> --- a/hw/ppc/spapr_hcall.c
> +++ b/hw/ppc/spapr_hcall.c
> @@ -1656,6 +1656,46 @@ static target_ulong h_client_architecture_support(PowerPCCPU *cpu,
>      return H_SUCCESS;
>  }
>  
> +static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr,
> +                                target_ulong opcode, target_ulong *args)
> +{
> +    target_ulong dt = ppc64_phys_to_real(args[0]);
> +    struct fdt_header hdr = { 0 };
> +    unsigned cb;
> +    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
> +
> +    cpu_physical_memory_read(dt, &hdr, sizeof(hdr));
> +    cb = fdt32_to_cpu(hdr.totalsize);
> +
> +    if (fdt_check_header(&hdr) ||
> +        fdt32_to_cpu(hdr.boot_cpuid_phys) ||

A nonzero boot cpuid is potentially valid, we shouldn't fail that.

> +        fdt32_to_cpu(hdr.off_dt_struct) >= cb ||
> +        fdt32_to_cpu(hdr.off_dt_strings) >= cb ||
> +        fdt32_to_cpu(hdr.off_mem_rsvmap) >= cb ||

Just checking the offset isn't very useful.  You need to check two
things for each of the blocks:
	off + size >= off	; this checks there's no overflow
	off + size <= totalsize	; checks the block fits in the blob

With the additional complication that you don't actually have a size
for the rsvmap - so you have to step through it to verify that.  For a
v16 blob you don't have one for the structure blob either, but you
could simply reject v16 blobs.

> +        fdt32_to_cpu(hdr.totalsize) != fdt32_to_cpu(hdr.size_dt_strings) +
> +                fdt32_to_cpu(hdr.size_dt_struct) +
> +                sizeof(struct fdt_reserve_entry) +
> +                sizeof(hdr)

This check is invalid.  It's allowed to have gaps between the blocks
in the FDT, which could increase the size.  In some cases it's even
required, to meet the alignment requirements for each block.

||

Yeah.. this is all a bit complicated, I'm really thinking about a
fdt_fsck() function for libfdt.

> +        cb / spapr->fdt_initial_size > 2) {
> +        trace_spapr_update_dt_failed(spapr->fdt_initial_size, cb,
> +            fdt32_to_cpu(hdr.magic));
> +        return H_PARAMETER;
> +    }
> +
> +    if (!smc->update_dt_enabled) {
> +        return H_SUCCESS;
> +    }
> +
> +    g_free(spapr->fdt_blob);
> +    spapr->fdt_size = cb;
> +    spapr->fdt_blob = g_malloc0(cb);
> +    cpu_physical_memory_read(dt, spapr->fdt_blob, cb);
> +
> +    trace_spapr_update_dt(cb);
> +
> +    return H_SUCCESS;
> +}
> +
>  static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
>  static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1];
>  
> @@ -1753,6 +1793,8 @@ static void hypercall_register_types(void)
>  
>      /* ibm,client-architecture-support support */
>      spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support);
> +
> +    spapr_register_hypercall(KVMPPC_H_UPDATE_DT, h_update_dt);
>  }
>  
>  type_init(hypercall_register_types)
> diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
> index 4a6a6490fa..60ee4e3a4b 100644
> --- a/hw/ppc/trace-events
> +++ b/hw/ppc/trace-events
> @@ -18,6 +18,8 @@ spapr_cas_pvr_try(uint32_t pvr) "0x%x"
>  spapr_cas_pvr(uint32_t cur_pvr, bool explicit_match, uint32_t new_pvr) "current=0x%x, explicit_match=%u, new=0x%x"
>  spapr_h_resize_hpt_prepare(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
>  spapr_h_resize_hpt_commit(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
> +spapr_update_dt(unsigned cb) "New blob %u bytes"
> +spapr_update_dt_failed(unsigned cbold, unsigned cbnew, unsigned magic) "Old blob %u bytes, new blob %u bytes, magic 0x%x"
>  
>  # hw/ppc/spapr_iommu.c
>  spapr_iommu_put(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t ret) "liobn=0x%"PRIx64" ioba=0x%"PRIx64" tce=0x%"PRIx64" ret=%"PRId64
Alexey Kardashevskiy Oct. 17, 2017, 5:55 a.m. UTC | #2
On 16/10/17 20:36, David Gibson wrote:
> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy wrote:
>> SLOF receives a device tree and updates it with various properties
>> before switching to the guest kernel and QEMU is not aware of any changes
>> made by SLOF. Since there is no real RTAS and QEMU implements it,
>> it makes sense to pass the SLOF device tree to QEMU so the latter could
>> implement RTAS related tasks better.
>>
>> Specifially, now QEMU can find out the actual XICS phandle (for PHB
>> hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
>> assisted NMI - FWNMI).
>>
>> This stores the initial DT blob in the sPAPR machine and replaces it
>> in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
>>
>> This implements a basic FDT header validity check of the new blob;
>> the new blob size should not increase more than twice since the reset.
>>
>> This adds a machine property - update_dt_enabled - to allow backward
>> migration.
>>
>> This requires SLOF update: "fdt: Pass the resulting device tree to QEMU".
>>
>> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
>> ---
>> Changes:
>> v3:
>> * store reset-time FDT blob size and compare the update size against it;
>> this disallows more than 2x increase between resets
>> * added some FDT header sanity checks
>> * implemented migration
>>
>> ---
>> I could store just a size of the QEMU's blob, or a tree, not sure
>> which one makes more sense here.
>>
>> This allows up to 2 times blob increase. Not 1.5 just to avoid
>> float/double, just looks a bit ugly imho.
>> ---
>>  include/hw/ppc/spapr.h |  7 ++++++-
>>  hw/ppc/spapr.c         | 31 ++++++++++++++++++++++++++++++-
>>  hw/ppc/spapr_hcall.c   | 42 ++++++++++++++++++++++++++++++++++++++++++
>>  hw/ppc/trace-events    |  2 ++
>>  4 files changed, 80 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
>> index c1b365f564..a9ccc14823 100644
>> --- a/include/hw/ppc/spapr.h
>> +++ b/include/hw/ppc/spapr.h
>> @@ -60,6 +60,7 @@ struct sPAPRMachineClass {
>>      /*< public >*/
>>      bool dr_lmb_enabled;       /* enable dynamic-reconfig/hotplug of LMBs */
>>      bool use_ohci_by_default;  /* use USB-OHCI instead of XHCI */
>> +    bool update_dt_enabled;    /* enable KVMPPC_H_UPDATE_DT */
>>      const char *tcg_default_cpu; /* which (TCG) CPU to simulate by default */
>>      bool pre_2_10_has_unused_icps;
>>      void (*phb_placement)(sPAPRMachineState *spapr, uint32_t index,
>> @@ -92,6 +93,9 @@ struct sPAPRMachineState {
>>      int vrma_adjust;
>>      ssize_t rtas_size;
>>      void *rtas_blob;
>> +    uint32_t fdt_size;
>> +    uint32_t fdt_initial_size;
>> +    void *fdt_blob;
>>      long kernel_size;
>>      bool kernel_le;
>>      uint32_t initrd_base;
>> @@ -400,7 +404,8 @@ struct sPAPRMachineState {
>>  #define KVMPPC_H_LOGICAL_MEMOP  (KVMPPC_HCALL_BASE + 0x1)
>>  /* Client Architecture support */
>>  #define KVMPPC_H_CAS            (KVMPPC_HCALL_BASE + 0x2)
>> -#define KVMPPC_HCALL_MAX        KVMPPC_H_CAS
>> +#define KVMPPC_H_UPDATE_DT      (KVMPPC_HCALL_BASE + 0x3)
>> +#define KVMPPC_HCALL_MAX        KVMPPC_H_UPDATE_DT
>>  
>>  typedef struct sPAPRDeviceTreeUpdateHeader {
>>      uint32_t version_id;
>> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
>> index ff87f155d5..cb7bcc851e 100644
>> --- a/hw/ppc/spapr.c
>> +++ b/hw/ppc/spapr.c
>> @@ -1467,7 +1467,10 @@ static void ppc_spapr_reset(void)
>>      /* Load the fdt */
>>      qemu_fdt_dumpdtb(fdt, fdt_totalsize(fdt));
>>      cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
>> -    g_free(fdt);
>> +    g_free(spapr->fdt_blob);
>> +    spapr->fdt_size = fdt_totalsize(fdt);
>> +    spapr->fdt_initial_size = spapr->fdt_size;
>> +    spapr->fdt_blob = fdt;
>>  
>>      /* Set up the entry state */
>>      first_ppc_cpu = POWERPC_CPU(first_cpu);
>> @@ -1675,6 +1678,27 @@ static const VMStateDescription vmstate_spapr_patb_entry = {
>>      },
>>  };
>>  
>> +static bool spapr_dtb_needed(void *opaque)
>> +{
>> +    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(opaque);
>> +
>> +    return smc->update_dt_enabled;
>> +}
>> +
>> +static const VMStateDescription vmstate_spapr_dtb = {
>> +    .name = "spapr_dtb",
>> +    .version_id = 1,
>> +    .minimum_version_id = 1,
>> +    .needed = spapr_dtb_needed,
>> +    .fields = (VMStateField[]) {
>> +        VMSTATE_UINT32(fdt_initial_size, sPAPRMachineState),
> 
> I'm not sure you need to migrate initial size.  The destination can
> work this out itself.. > unless we skip the reset when we have an
> incoming migration, I'm not sure.


Nah, ppc_spapr_reset() is called when incoming migration and does not do
anything different than normal reset situation so I'll remove this.


> 
>> +        VMSTATE_UINT32(fdt_size, sPAPRMachineState),
>> +        VMSTATE_VBUFFER_ALLOC_UINT32(fdt_blob, sPAPRMachineState, 0, NULL,
>> +                                     fdt_size),
>> +        VMSTATE_END_OF_LIST()
>> +    },
>> +};
>> +
>>  static const VMStateDescription vmstate_spapr = {
>>      .name = "spapr",
>>      .version_id = 3,
>> @@ -1694,6 +1718,7 @@ static const VMStateDescription vmstate_spapr = {
>>          &vmstate_spapr_ov5_cas,
>>          &vmstate_spapr_patb_entry,
>>          &vmstate_spapr_pending_events,
>> +        &vmstate_spapr_dtb,
>>          NULL
>>      }
>>  };
>> @@ -3605,6 +3630,7 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data)
>>      hc->unplug_request = spapr_machine_device_unplug_request;
>>  
>>      smc->dr_lmb_enabled = true;
>> +    smc->update_dt_enabled = true;
>>      smc->tcg_default_cpu = "POWER8";
>>      mc->has_hotpluggable_cpus = true;
>>      smc->resize_hpt_default = SPAPR_RESIZE_HPT_ENABLED;
>> @@ -3703,7 +3729,10 @@ static void spapr_machine_2_10_instance_options(MachineState *machine)
>>  
>>  static void spapr_machine_2_10_class_options(MachineClass *mc)
>>  {
>> +    sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
>> +
>>      spapr_machine_2_11_class_options(mc);
>> +    smc->update_dt_enabled = false;
>>      SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_10);
>>  }
>>  
>> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
>> index 8d72bb7c1c..be3de41080 100644
>> --- a/hw/ppc/spapr_hcall.c
>> +++ b/hw/ppc/spapr_hcall.c
>> @@ -1656,6 +1656,46 @@ static target_ulong h_client_architecture_support(PowerPCCPU *cpu,
>>      return H_SUCCESS;
>>  }
>>  
>> +static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr,
>> +                                target_ulong opcode, target_ulong *args)
>> +{
>> +    target_ulong dt = ppc64_phys_to_real(args[0]);
>> +    struct fdt_header hdr = { 0 };
>> +    unsigned cb;
>> +    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
>> +
>> +    cpu_physical_memory_read(dt, &hdr, sizeof(hdr));
>> +    cb = fdt32_to_cpu(hdr.totalsize);
>> +
>> +    if (fdt_check_header(&hdr) ||
>> +        fdt32_to_cpu(hdr.boot_cpuid_phys) ||
> 
> A nonzero boot cpuid is potentially valid, we shouldn't fail that.

Already discovered...

> 
>> +        fdt32_to_cpu(hdr.off_dt_struct) >= cb ||
>> +        fdt32_to_cpu(hdr.off_dt_strings) >= cb ||
>> +        fdt32_to_cpu(hdr.off_mem_rsvmap) >= cb ||
> 
> Just checking the offset isn't very useful.  You need to check two
> things for each of the blocks:
> 	off + size >= off	; this checks there's no overflow
> 	off + size <= totalsize	; checks the block fits in the blob
> 
> With the additional complication that you don't actually have a size
> for the rsvmap - so you have to step through it to verify that.  For a
> v16 blob you don't have one for the structure blob either, but you
> could simply reject v16 blobs.

Ok, v17 it is.


> 
>> +        fdt32_to_cpu(hdr.totalsize) != fdt32_to_cpu(hdr.size_dt_strings) +
>> +                fdt32_to_cpu(hdr.size_dt_struct) +
>> +                sizeof(struct fdt_reserve_entry) +
>> +                sizeof(hdr)
> 
> This check is invalid.  It's allowed to have gaps between the blocks
> in the FDT, which could increase the size.  In some cases it's even
> required, to meet the alignment requirements for each block.


Invalid? At the moment what SLOF provides passes this check and it will,
and we only expect these blobs to come from SLOF - no need to protect from
who knows what.



> ||
> 
> Yeah.. this is all a bit complicated, I'm really thinking about a
> fdt_fsck() function for libfdt.


Oh. So what now? Do as below or wait for libdtc update?



+    cb = fdt32_to_cpu(hdr.totalsize);
+
+#define FDT_CHK(_off, _size, total) ({ \
+        uint32_t off = fdt32_to_cpu(_off); \
+        uint32_t size = fdt32_to_cpu(_size); \
+        ((off + size >= off) && (off + size <= (total))); \
+    })
+
+    if (fdt_check_header(&hdr) ||
+        fdt32_to_cpu(hdr.version) < 0x11 ||
+        !FDT_CHK(hdr.off_dt_struct, hdr.size_dt_struct, cb) ||
+        !FDT_CHK(hdr.off_dt_strings, hdr.size_dt_strings, cb) ||
+        cb <= fdt32_to_cpu(hdr.off_mem_rsvmap) ||
+        cb < fdt32_to_cpu(hdr.size_dt_strings) +
+                fdt32_to_cpu(hdr.size_dt_struct) +
+                sizeof(struct fdt_reserve_entry) +
+                sizeof(hdr) ||
+        cb / spapr->fdt_initial_size > 2) {
+        trace_spapr_update_dt_failed(spapr->fdt_initial_size, cb,
+            fdt32_to_cpu(hdr.magic));
+        return H_PARAMETER;
+    }
David Gibson Oct. 19, 2017, 6:24 a.m. UTC | #3
On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
> On 16/10/17 20:36, David Gibson wrote:
> > On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
> wrote:
[snip]
> >> +static const VMStateDescription vmstate_spapr_dtb = {
> >> +    .name = "spapr_dtb",
> >> +    .version_id = 1,
> >> +    .minimum_version_id = 1,
> >> +    .needed = spapr_dtb_needed,
> >> +    .fields = (VMStateField[]) {
> >> +        VMSTATE_UINT32(fdt_initial_size, sPAPRMachineState),
> > 
> > I'm not sure you need to migrate initial size.  The destination can
> > work this out itself.. > unless we skip the reset when we have an
> > incoming migration, I'm not sure.
> 
> 
> Nah, ppc_spapr_reset() is called when incoming migration and does not do
> anything different than normal reset situation so I'll remove this.

Ok.

[snip]
> >> +static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr,
> >> +                                target_ulong opcode, target_ulong *args)
> >> +{
> >> +    target_ulong dt = ppc64_phys_to_real(args[0]);
> >> +    struct fdt_header hdr = { 0 };
> >> +    unsigned cb;
> >> +    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
> >> +
> >> +    cpu_physical_memory_read(dt, &hdr, sizeof(hdr));
> >> +    cb = fdt32_to_cpu(hdr.totalsize);
> >> +
> >> +    if (fdt_check_header(&hdr) ||
> >> +        fdt32_to_cpu(hdr.boot_cpuid_phys) ||
> > 
> > A nonzero boot cpuid is potentially valid, we shouldn't fail that.
> 
> Already discovered...


Ok :)

> >> +        fdt32_to_cpu(hdr.off_dt_struct) >= cb ||
> >> +        fdt32_to_cpu(hdr.off_dt_strings) >= cb ||
> >> +        fdt32_to_cpu(hdr.off_mem_rsvmap) >= cb ||
> > 
> > Just checking the offset isn't very useful.  You need to check two
> > things for each of the blocks:
> > 	off + size >= off	; this checks there's no overflow
> > 	off + size <= totalsize	; checks the block fits in the blob
> > 
> > With the additional complication that you don't actually have a size
> > for the rsvmap - so you have to step through it to verify that.  For a
> > v16 blob you don't have one for the structure blob either, but you
> > could simply reject v16 blobs.
> 
> Ok, v17 it is.
> 
> 
> > 
> >> +        fdt32_to_cpu(hdr.totalsize) != fdt32_to_cpu(hdr.size_dt_strings) +
> >> +                fdt32_to_cpu(hdr.size_dt_struct) +
> >> +                sizeof(struct fdt_reserve_entry) +
> >> +                sizeof(hdr)
> > 
> > This check is invalid.  It's allowed to have gaps between the blocks
> > in the FDT, which could increase the size.  In some cases it's even
> > required, to meet the alignment requirements for each block.
> 
> 
> Invalid? At the moment what SLOF provides passes this check and it will,
> and we only expect these blobs to come from SLOF - no need to protect from
> who knows what.

Well, "invalid" in the sense of unnecessarily restrictive.  Sure, SLOF
satisfies it at the moment, but it's not something qemu actually
*needs*, so all this accomplishes is making qemu more fragile against
SLOF changes (i.e. evil "coupling" in 1st year Comp Sci terminology).

> > ||
> > 
> > Yeah.. this is all a bit complicated, I'm really thinking about a
> > fdt_fsck() function for libfdt.
> 
> 
> Oh. So what now? Do as below or wait for libdtc update?

So I started hacking on this.  It's a bit fiddlier to get right than I
anticipated.  How about you make a placeholder function to "test" the
tree for now, with a comment that it will be updated once the libfdt
extensions are there.
Alexey Kardashevskiy Oct. 20, 2017, 12:46 a.m. UTC | #4
On 19/10/17 17:24, David Gibson wrote:
> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>> On 16/10/17 20:36, David Gibson wrote:
>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>> wrote:
> [snip]
>>> ||
>>>
>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>> fdt_fsck() function for libfdt.
>>
>>
>> Oh. So what now? Do as below or wait for libdtc update?
> 
> So I started hacking on this.  It's a bit fiddlier to get right than I
> anticipated.  How about you make a placeholder function to "test" the
> tree for now, with a comment that it will be updated once the libfdt
> extensions are there.

What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?

Are we in a hurry with this one at all, or I can wait till libfdt gets this
fsck()?
Alexey Kardashevskiy Nov. 7, 2017, 7:14 a.m. UTC | #5
On 20/10/17 11:46, Alexey Kardashevskiy wrote:
> On 19/10/17 17:24, David Gibson wrote:
>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>> On 16/10/17 20:36, David Gibson wrote:
>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>> wrote:
>> [snip]
>>>> ||
>>>>
>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>> fdt_fsck() function for libfdt.
>>>
>>>
>>> Oh. So what now? Do as below or wait for libdtc update?
>>
>> So I started hacking on this.  It's a bit fiddlier to get right than I
>> anticipated.  How about you make a placeholder function to "test" the
>> tree for now, with a comment that it will be updated once the libfdt
>> extensions are there.
> 
> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
> 
> Are we in a hurry with this one at all, or I can wait till libfdt gets this
> fsck()?


Ping?

This is not v2.11 material, is it?
David Gibson Nov. 9, 2017, 6:38 a.m. UTC | #6
On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
> > On 19/10/17 17:24, David Gibson wrote:
> >> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
> >>> On 16/10/17 20:36, David Gibson wrote:
> >>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
> >>> wrote:
> >> [snip]
> >>>> ||
> >>>>
> >>>> Yeah.. this is all a bit complicated, I'm really thinking about a
> >>>> fdt_fsck() function for libfdt.
> >>>
> >>>
> >>> Oh. So what now? Do as below or wait for libdtc update?
> >>
> >> So I started hacking on this.  It's a bit fiddlier to get right than I
> >> anticipated.  How about you make a placeholder function to "test" the
> >> tree for now, with a comment that it will be updated once the libfdt
> >> extensions are there.
> > 
> > What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
> > 
> > Are we in a hurry with this one at all, or I can wait till libfdt gets this
> > fsck()?
> 
> 
> Ping?
> 
> This is not v2.11 material, is it?

Not at this stage, no.

I've started looking at writing the fdt_fsck() thing, but got
sidetracked by a bunch of related fixes to safety of handling
corrupted blobs in libfdt.
Alexey Kardashevskiy Dec. 11, 2017, 6:20 a.m. UTC | #7
On 09/11/17 17:38, David Gibson wrote:
> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
>>> On 19/10/17 17:24, David Gibson wrote:
>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>>>> On 16/10/17 20:36, David Gibson wrote:
>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>>>> wrote:
>>>> [snip]
>>>>>> ||
>>>>>>
>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>>>> fdt_fsck() function for libfdt.
>>>>>
>>>>>
>>>>> Oh. So what now? Do as below or wait for libdtc update?
>>>>
>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
>>>> anticipated.  How about you make a placeholder function to "test" the
>>>> tree for now, with a comment that it will be updated once the libfdt
>>>> extensions are there.
>>>
>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
>>>
>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
>>> fsck()?
>>
>>
>> Ping?
>>
>> This is not v2.11 material, is it?
> 
> Not at this stage, no.
> 
> I've started looking at writing the fdt_fsck() thing, but got
> sidetracked by a bunch of related fixes to safety of handling
> corrupted blobs in libfdt.

Please let me know when I can repost the "
ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
Alexey Kardashevskiy Jan. 2, 2018, 6:13 a.m. UTC | #8
On 11/12/17 17:20, Alexey Kardashevskiy wrote:
> On 09/11/17 17:38, David Gibson wrote:
>> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
>>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
>>>> On 19/10/17 17:24, David Gibson wrote:
>>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>>>>> On 16/10/17 20:36, David Gibson wrote:
>>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>>>>> wrote:
>>>>> [snip]
>>>>>>> ||
>>>>>>>
>>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>>>>> fdt_fsck() function for libfdt.
>>>>>>
>>>>>>
>>>>>> Oh. So what now? Do as below or wait for libdtc update?
>>>>>
>>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
>>>>> anticipated.  How about you make a placeholder function to "test" the
>>>>> tree for now, with a comment that it will be updated once the libfdt
>>>>> extensions are there.
>>>>
>>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
>>>>
>>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
>>>> fsck()?
>>>
>>>
>>> Ping?
>>>
>>> This is not v2.11 material, is it?
>>
>> Not at this stage, no.
>>
>> I've started looking at writing the fdt_fsck() thing, but got
>> sidetracked by a bunch of related fixes to safety of handling
>> corrupted blobs in libfdt.
> 
> Please let me know when I can repost the "
> ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.


Still to early to repost?
David Gibson Jan. 3, 2018, 12:09 a.m. UTC | #9
On Tue, Jan 02, 2018 at 05:13:09PM +1100, Alexey Kardashevskiy wrote:
> On 11/12/17 17:20, Alexey Kardashevskiy wrote:
> > On 09/11/17 17:38, David Gibson wrote:
> >> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
> >>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
> >>>> On 19/10/17 17:24, David Gibson wrote:
> >>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
> >>>>>> On 16/10/17 20:36, David Gibson wrote:
> >>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
> >>>>>> wrote:
> >>>>> [snip]
> >>>>>>> ||
> >>>>>>>
> >>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
> >>>>>>> fdt_fsck() function for libfdt.
> >>>>>>
> >>>>>>
> >>>>>> Oh. So what now? Do as below or wait for libdtc update?
> >>>>>
> >>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
> >>>>> anticipated.  How about you make a placeholder function to "test" the
> >>>>> tree for now, with a comment that it will be updated once the libfdt
> >>>>> extensions are there.
> >>>>
> >>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
> >>>>
> >>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
> >>>> fsck()?
> >>>
> >>>
> >>> Ping?
> >>>
> >>> This is not v2.11 material, is it?
> >>
> >> Not at this stage, no.
> >>
> >> I've started looking at writing the fdt_fsck() thing, but got
> >> sidetracked by a bunch of related fixes to safety of handling
> >> corrupted blobs in libfdt.
> > 
> > Please let me know when I can repost the "
> > ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
> 
> 
> Still to early to repost?

No.
Alexey Kardashevskiy Jan. 8, 2018, 8:35 a.m. UTC | #10
On 03/01/18 11:09, David Gibson wrote:
> On Tue, Jan 02, 2018 at 05:13:09PM +1100, Alexey Kardashevskiy wrote:
>> On 11/12/17 17:20, Alexey Kardashevskiy wrote:
>>> On 09/11/17 17:38, David Gibson wrote:
>>>> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
>>>>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
>>>>>> On 19/10/17 17:24, David Gibson wrote:
>>>>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>>>>>>> On 16/10/17 20:36, David Gibson wrote:
>>>>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>>>>>>> wrote:
>>>>>>> [snip]
>>>>>>>>> ||
>>>>>>>>>
>>>>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>>>>>>> fdt_fsck() function for libfdt.
>>>>>>>>
>>>>>>>>
>>>>>>>> Oh. So what now? Do as below or wait for libdtc update?
>>>>>>>
>>>>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
>>>>>>> anticipated.  How about you make a placeholder function to "test" the
>>>>>>> tree for now, with a comment that it will be updated once the libfdt
>>>>>>> extensions are there.
>>>>>>
>>>>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
>>>>>>
>>>>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
>>>>>> fsck()?
>>>>>
>>>>>
>>>>> Ping?
>>>>>
>>>>> This is not v2.11 material, is it?
>>>>
>>>> Not at this stage, no.
>>>>
>>>> I've started looking at writing the fdt_fsck() thing, but got
>>>> sidetracked by a bunch of related fixes to safety of handling
>>>> corrupted blobs in libfdt.
>>>
>>> Please let me know when I can repost the "
>>> ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
>>
>>
>> Still to early to repost?
> 
> No.


I looked at the recent libfdt (from qemu tree, sha1  e543880, v1.4.6) and
could not find fdt_fsck() or similar, and I was waiting for this really,
have I missed something?
David Gibson Jan. 10, 2018, 8:59 a.m. UTC | #11
On Mon, Jan 08, 2018 at 07:35:43PM +1100, Alexey Kardashevskiy wrote:
> On 03/01/18 11:09, David Gibson wrote:
> > On Tue, Jan 02, 2018 at 05:13:09PM +1100, Alexey Kardashevskiy wrote:
> >> On 11/12/17 17:20, Alexey Kardashevskiy wrote:
> >>> On 09/11/17 17:38, David Gibson wrote:
> >>>> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
> >>>>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
> >>>>>> On 19/10/17 17:24, David Gibson wrote:
> >>>>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
> >>>>>>>> On 16/10/17 20:36, David Gibson wrote:
> >>>>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
> >>>>>>>> wrote:
> >>>>>>> [snip]
> >>>>>>>>> ||
> >>>>>>>>>
> >>>>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
> >>>>>>>>> fdt_fsck() function for libfdt.
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Oh. So what now? Do as below or wait for libdtc update?
> >>>>>>>
> >>>>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
> >>>>>>> anticipated.  How about you make a placeholder function to "test" the
> >>>>>>> tree for now, with a comment that it will be updated once the libfdt
> >>>>>>> extensions are there.
> >>>>>>
> >>>>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
> >>>>>>
> >>>>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
> >>>>>> fsck()?
> >>>>>
> >>>>>
> >>>>> Ping?
> >>>>>
> >>>>> This is not v2.11 material, is it?
> >>>>
> >>>> Not at this stage, no.
> >>>>
> >>>> I've started looking at writing the fdt_fsck() thing, but got
> >>>> sidetracked by a bunch of related fixes to safety of handling
> >>>> corrupted blobs in libfdt.
> >>>
> >>> Please let me know when I can repost the "
> >>> ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
> >>
> >>
> >> Still to early to repost?
> > 
> > No.
> 
> 
> I looked at the recent libfdt (from qemu tree, sha1  e543880, v1.4.6) and
> could not find fdt_fsck() or similar, and I was waiting for this really,
> have I missed something?

Oh, right, yeah, I haven't had time to look at that again.
Alexey Kardashevskiy Feb. 15, 2018, 5:43 a.m. UTC | #12
On 10/01/18 19:59, David Gibson wrote:
> On Mon, Jan 08, 2018 at 07:35:43PM +1100, Alexey Kardashevskiy wrote:
>> On 03/01/18 11:09, David Gibson wrote:
>>> On Tue, Jan 02, 2018 at 05:13:09PM +1100, Alexey Kardashevskiy wrote:
>>>> On 11/12/17 17:20, Alexey Kardashevskiy wrote:
>>>>> On 09/11/17 17:38, David Gibson wrote:
>>>>>> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
>>>>>>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
>>>>>>>> On 19/10/17 17:24, David Gibson wrote:
>>>>>>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>>>>>>>>> On 16/10/17 20:36, David Gibson wrote:
>>>>>>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>>>>>>>>> wrote:
>>>>>>>>> [snip]
>>>>>>>>>>> ||
>>>>>>>>>>>
>>>>>>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>>>>>>>>> fdt_fsck() function for libfdt.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Oh. So what now? Do as below or wait for libdtc update?
>>>>>>>>>
>>>>>>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
>>>>>>>>> anticipated.  How about you make a placeholder function to "test" the
>>>>>>>>> tree for now, with a comment that it will be updated once the libfdt
>>>>>>>>> extensions are there.
>>>>>>>>
>>>>>>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
>>>>>>>>
>>>>>>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
>>>>>>>> fsck()?
>>>>>>>
>>>>>>>
>>>>>>> Ping?
>>>>>>>
>>>>>>> This is not v2.11 material, is it?
>>>>>>
>>>>>> Not at this stage, no.
>>>>>>
>>>>>> I've started looking at writing the fdt_fsck() thing, but got
>>>>>> sidetracked by a bunch of related fixes to safety of handling
>>>>>> corrupted blobs in libfdt.
>>>>>
>>>>> Please let me know when I can repost the "
>>>>> ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
>>>>
>>>>
>>>> Still to early to repost?
>>>
>>> No.
>>
>>
>> I looked at the recent libfdt (from qemu tree, sha1  e543880, v1.4.6) and
>> could not find fdt_fsck() or similar, and I was waiting for this really,
>> have I missed something?
> 
> Oh, right, yeah, I haven't had time to look at that again.


Any progress with fdt_fsck()? Thanks,
Alexey Kardashevskiy March 7, 2018, 4:02 a.m. UTC | #13
On 15/02/18 16:43, Alexey Kardashevskiy wrote:
> On 10/01/18 19:59, David Gibson wrote:
>> On Mon, Jan 08, 2018 at 07:35:43PM +1100, Alexey Kardashevskiy wrote:
>>> On 03/01/18 11:09, David Gibson wrote:
>>>> On Tue, Jan 02, 2018 at 05:13:09PM +1100, Alexey Kardashevskiy wrote:
>>>>> On 11/12/17 17:20, Alexey Kardashevskiy wrote:
>>>>>> On 09/11/17 17:38, David Gibson wrote:
>>>>>>> On Tue, Nov 07, 2017 at 06:14:04PM +1100, Alexey Kardashevskiy wrote:
>>>>>>>> On 20/10/17 11:46, Alexey Kardashevskiy wrote:
>>>>>>>>> On 19/10/17 17:24, David Gibson wrote:
>>>>>>>>>> On Tue, Oct 17, 2017 at 04:55:03PM +1100, Alexey Kardashevskiy wrote:
>>>>>>>>>>> On 16/10/17 20:36, David Gibson wrote:
>>>>>>>>>>>> On Mon, Oct 16, 2017 at 04:20:04PM +1100, Alexey Kardashevskiy
>>>>>>>>>>> wrote:
>>>>>>>>>> [snip]
>>>>>>>>>>>> ||
>>>>>>>>>>>>
>>>>>>>>>>>> Yeah.. this is all a bit complicated, I'm really thinking about a
>>>>>>>>>>>> fdt_fsck() function for libfdt.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Oh. So what now? Do as below or wait for libdtc update?
>>>>>>>>>>
>>>>>>>>>> So I started hacking on this.  It's a bit fiddlier to get right than I
>>>>>>>>>> anticipated.  How about you make a placeholder function to "test" the
>>>>>>>>>> tree for now, with a comment that it will be updated once the libfdt
>>>>>>>>>> extensions are there.
>>>>>>>>>
>>>>>>>>> What would the placeholder do? Nothing or my proposed "FDT_CHK" thingy?
>>>>>>>>>
>>>>>>>>> Are we in a hurry with this one at all, or I can wait till libfdt gets this
>>>>>>>>> fsck()?
>>>>>>>>
>>>>>>>>
>>>>>>>> Ping?
>>>>>>>>
>>>>>>>> This is not v2.11 material, is it?
>>>>>>>
>>>>>>> Not at this stage, no.
>>>>>>>
>>>>>>> I've started looking at writing the fdt_fsck() thing, but got
>>>>>>> sidetracked by a bunch of related fixes to safety of handling
>>>>>>> corrupted blobs in libfdt.
>>>>>>
>>>>>> Please let me know when I can repost the "
>>>>>> ppc/spapr: Receive and store device tree blob from SLOF" again. Thanks.
>>>>>
>>>>>
>>>>> Still to early to repost?
>>>>
>>>> No.
>>>
>>>
>>> I looked at the recent libfdt (from qemu tree, sha1  e543880, v1.4.6) and
>>> could not find fdt_fsck() or similar, and I was waiting for this really,
>>> have I missed something?
>>
>> Oh, right, yeah, I haven't had time to look at that again.
> 
> 
> Any progress with fdt_fsck()? Thanks,


Ping?
diff mbox series

Patch

diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index c1b365f564..a9ccc14823 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -60,6 +60,7 @@  struct sPAPRMachineClass {
     /*< public >*/
     bool dr_lmb_enabled;       /* enable dynamic-reconfig/hotplug of LMBs */
     bool use_ohci_by_default;  /* use USB-OHCI instead of XHCI */
+    bool update_dt_enabled;    /* enable KVMPPC_H_UPDATE_DT */
     const char *tcg_default_cpu; /* which (TCG) CPU to simulate by default */
     bool pre_2_10_has_unused_icps;
     void (*phb_placement)(sPAPRMachineState *spapr, uint32_t index,
@@ -92,6 +93,9 @@  struct sPAPRMachineState {
     int vrma_adjust;
     ssize_t rtas_size;
     void *rtas_blob;
+    uint32_t fdt_size;
+    uint32_t fdt_initial_size;
+    void *fdt_blob;
     long kernel_size;
     bool kernel_le;
     uint32_t initrd_base;
@@ -400,7 +404,8 @@  struct sPAPRMachineState {
 #define KVMPPC_H_LOGICAL_MEMOP  (KVMPPC_HCALL_BASE + 0x1)
 /* Client Architecture support */
 #define KVMPPC_H_CAS            (KVMPPC_HCALL_BASE + 0x2)
-#define KVMPPC_HCALL_MAX        KVMPPC_H_CAS
+#define KVMPPC_H_UPDATE_DT      (KVMPPC_HCALL_BASE + 0x3)
+#define KVMPPC_HCALL_MAX        KVMPPC_H_UPDATE_DT
 
 typedef struct sPAPRDeviceTreeUpdateHeader {
     uint32_t version_id;
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index ff87f155d5..cb7bcc851e 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1467,7 +1467,10 @@  static void ppc_spapr_reset(void)
     /* Load the fdt */
     qemu_fdt_dumpdtb(fdt, fdt_totalsize(fdt));
     cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
-    g_free(fdt);
+    g_free(spapr->fdt_blob);
+    spapr->fdt_size = fdt_totalsize(fdt);
+    spapr->fdt_initial_size = spapr->fdt_size;
+    spapr->fdt_blob = fdt;
 
     /* Set up the entry state */
     first_ppc_cpu = POWERPC_CPU(first_cpu);
@@ -1675,6 +1678,27 @@  static const VMStateDescription vmstate_spapr_patb_entry = {
     },
 };
 
+static bool spapr_dtb_needed(void *opaque)
+{
+    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(opaque);
+
+    return smc->update_dt_enabled;
+}
+
+static const VMStateDescription vmstate_spapr_dtb = {
+    .name = "spapr_dtb",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = spapr_dtb_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(fdt_initial_size, sPAPRMachineState),
+        VMSTATE_UINT32(fdt_size, sPAPRMachineState),
+        VMSTATE_VBUFFER_ALLOC_UINT32(fdt_blob, sPAPRMachineState, 0, NULL,
+                                     fdt_size),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
 static const VMStateDescription vmstate_spapr = {
     .name = "spapr",
     .version_id = 3,
@@ -1694,6 +1718,7 @@  static const VMStateDescription vmstate_spapr = {
         &vmstate_spapr_ov5_cas,
         &vmstate_spapr_patb_entry,
         &vmstate_spapr_pending_events,
+        &vmstate_spapr_dtb,
         NULL
     }
 };
@@ -3605,6 +3630,7 @@  static void spapr_machine_class_init(ObjectClass *oc, void *data)
     hc->unplug_request = spapr_machine_device_unplug_request;
 
     smc->dr_lmb_enabled = true;
+    smc->update_dt_enabled = true;
     smc->tcg_default_cpu = "POWER8";
     mc->has_hotpluggable_cpus = true;
     smc->resize_hpt_default = SPAPR_RESIZE_HPT_ENABLED;
@@ -3703,7 +3729,10 @@  static void spapr_machine_2_10_instance_options(MachineState *machine)
 
 static void spapr_machine_2_10_class_options(MachineClass *mc)
 {
+    sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
+
     spapr_machine_2_11_class_options(mc);
+    smc->update_dt_enabled = false;
     SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_10);
 }
 
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 8d72bb7c1c..be3de41080 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -1656,6 +1656,46 @@  static target_ulong h_client_architecture_support(PowerPCCPU *cpu,
     return H_SUCCESS;
 }
 
+static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                target_ulong opcode, target_ulong *args)
+{
+    target_ulong dt = ppc64_phys_to_real(args[0]);
+    struct fdt_header hdr = { 0 };
+    unsigned cb;
+    sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
+
+    cpu_physical_memory_read(dt, &hdr, sizeof(hdr));
+    cb = fdt32_to_cpu(hdr.totalsize);
+
+    if (fdt_check_header(&hdr) ||
+        fdt32_to_cpu(hdr.boot_cpuid_phys) ||
+        fdt32_to_cpu(hdr.off_dt_struct) >= cb ||
+        fdt32_to_cpu(hdr.off_dt_strings) >= cb ||
+        fdt32_to_cpu(hdr.off_mem_rsvmap) >= cb ||
+        fdt32_to_cpu(hdr.totalsize) != fdt32_to_cpu(hdr.size_dt_strings) +
+                fdt32_to_cpu(hdr.size_dt_struct) +
+                sizeof(struct fdt_reserve_entry) +
+                sizeof(hdr) ||
+        cb / spapr->fdt_initial_size > 2) {
+        trace_spapr_update_dt_failed(spapr->fdt_initial_size, cb,
+            fdt32_to_cpu(hdr.magic));
+        return H_PARAMETER;
+    }
+
+    if (!smc->update_dt_enabled) {
+        return H_SUCCESS;
+    }
+
+    g_free(spapr->fdt_blob);
+    spapr->fdt_size = cb;
+    spapr->fdt_blob = g_malloc0(cb);
+    cpu_physical_memory_read(dt, spapr->fdt_blob, cb);
+
+    trace_spapr_update_dt(cb);
+
+    return H_SUCCESS;
+}
+
 static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
 static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1];
 
@@ -1753,6 +1793,8 @@  static void hypercall_register_types(void)
 
     /* ibm,client-architecture-support support */
     spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support);
+
+    spapr_register_hypercall(KVMPPC_H_UPDATE_DT, h_update_dt);
 }
 
 type_init(hypercall_register_types)
diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
index 4a6a6490fa..60ee4e3a4b 100644
--- a/hw/ppc/trace-events
+++ b/hw/ppc/trace-events
@@ -18,6 +18,8 @@  spapr_cas_pvr_try(uint32_t pvr) "0x%x"
 spapr_cas_pvr(uint32_t cur_pvr, bool explicit_match, uint32_t new_pvr) "current=0x%x, explicit_match=%u, new=0x%x"
 spapr_h_resize_hpt_prepare(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
 spapr_h_resize_hpt_commit(uint64_t flags, uint64_t shift) "flags=0x%"PRIx64", shift=%"PRIu64
+spapr_update_dt(unsigned cb) "New blob %u bytes"
+spapr_update_dt_failed(unsigned cbold, unsigned cbnew, unsigned magic) "Old blob %u bytes, new blob %u bytes, magic 0x%x"
 
 # hw/ppc/spapr_iommu.c
 spapr_iommu_put(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t ret) "liobn=0x%"PRIx64" ioba=0x%"PRIx64" tce=0x%"PRIx64" ret=%"PRId64