diff mbox series

[RFC,v12,1/5] dt-bindings: PCI: Add definition of PCIe WAKE# irq and PCI irq

Message ID 20171226023646.17722-2-jeffy.chen@rock-chips.com
State Not Applicable
Headers show
Series PCI: rockchip: Move PCIe WAKE# handling into pci core | expand

Commit Message

Jeffy Chen Dec. 26, 2017, 2:36 a.m. UTC
We are going to handle PCIe WAKE# pin for PCI devices in the pci core,
so add definitions of the optional PCIe WAKE# pin for PCI devices.

Also add an definition of the optional PCI interrupt pin for PCI
devices to distinguish it from the PCIe WAKE# pin.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v13: None
Changes in v12:
Only add irq definitions for PCI devices and rewrite the commit message.

Changes in v11: None
Changes in v10: None
Changes in v9:
Add section for PCI devices and rewrite the commit message.

Changes in v8:
Add optional "pci", and rewrite commit message.

Changes in v7: None
Changes in v6: None
Changes in v5:
Move to pci.txt

Changes in v3: None
Changes in v2: None

 Documentation/devicetree/bindings/pci/pci.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Rob Herring (Arm) Dec. 26, 2017, 11:35 p.m. UTC | #1
On Tue, Dec 26, 2017 at 10:36:42AM +0800, Jeffy Chen wrote:
> We are going to handle PCIe WAKE# pin for PCI devices in the pci core,
> so add definitions of the optional PCIe WAKE# pin for PCI devices.
> 
> Also add an definition of the optional PCI interrupt pin for PCI
> devices to distinguish it from the PCIe WAKE# pin.

By v13 you should drop "RFC". RFC implies not ready for merging.

> 
> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> ---
> 
> Changes in v13: None
> Changes in v12:
> Only add irq definitions for PCI devices and rewrite the commit message.
> 
> Changes in v11: None
> Changes in v10: None
> Changes in v9:
> Add section for PCI devices and rewrite the commit message.
> 
> Changes in v8:
> Add optional "pci", and rewrite commit message.
> 
> Changes in v7: None
> Changes in v6: None
> Changes in v5:
> Move to pci.txt
> 
> Changes in v3: None
> Changes in v2: None
> 
>  Documentation/devicetree/bindings/pci/pci.txt | 10 ++++++++++
>  1 file changed, 10 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>
Rafael J. Wysocki Dec. 27, 2017, 12:43 a.m. UTC | #2
On Wednesday, December 27, 2017 12:35:52 AM CET Rob Herring wrote:
> On Tue, Dec 26, 2017 at 10:36:42AM +0800, Jeffy Chen wrote:
> > We are going to handle PCIe WAKE# pin for PCI devices in the pci core,
> > so add definitions of the optional PCIe WAKE# pin for PCI devices.
> > 
> > Also add an definition of the optional PCI interrupt pin for PCI
> > devices to distinguish it from the PCIe WAKE# pin.
> 
> By v13 you should drop "RFC". RFC implies not ready for merging.

Which very much still is the case AFAICS.

Thanks,
Rafael
Jeffy Chen Dec. 27, 2017, 1:36 a.m. UTC | #3
Hi Rafael and Rob,

Thanks for your reply.

On 12/27/2017 08:43 AM, Rafael J. Wysocki wrote:
> On Wednesday, December 27, 2017 12:35:52 AM CET Rob Herring wrote:
>> >On Tue, Dec 26, 2017 at 10:36:42AM +0800, Jeffy Chen wrote:
>>> > >We are going to handle PCIe WAKE# pin for PCI devices in the pci core,
>>> > >so add definitions of the optional PCIe WAKE# pin for PCI devices.
>>> > >
>>> > >Also add an definition of the optional PCI interrupt pin for PCI
>>> > >devices to distinguish it from the PCIe WAKE# pin.
>> >
>> >By v13 you should drop "RFC". RFC implies not ready for merging.
> Which very much still is the case AFAICS.
>
maybe i should split this series, and send dt-binding patch and the pci 
irq parsing patch along without RFC ?

> Thanks,
> Rafael
>
>
>
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index c77981c5dd18..3045ac452f27 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -24,3 +24,13 @@  driver implementation may support the following properties:
    unsupported link speed, for instance, trying to do training for
    unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
    for gen2, and '1' for gen1. Any other values are invalid.
+
+PCI devices may support the following properties:
+
+- interrupts: Interrupt specifier for each name in interrupt-names.
+- interrupt-names:
+    May contain "wakeup" for PCIe WAKE# interrupt and "pci" for PCI interrupt.
+    The PCI devices may optionally include an 'interrupts' property that
+    represents the legacy PCI interrupt. And when we try to specify the PCIe
+    WAKE# pin, a corresponding 'interrupt-names' property is required to
+    distinguish them.