diff mbox series

[U-Boot,V2,20/23] power: pmic/regulator allow dm be omitted by SPL

Message ID 20171204043136.17167-21-peng.fan@nxp.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show
Series imx: add i.MX8M support and i.MX8MQ EVK | expand

Commit Message

Peng Fan Dec. 4, 2017, 4:31 a.m. UTC 
Allow the dm driver be omitted by SPL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 drivers/power/pmic/Makefile      | 4 ++--
 drivers/power/regulator/Makefile | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

Comments

Stefano Babic Dec. 7, 2017, 8:43 a.m. UTC | #1 
On 04/12/2017 05:31, Peng Fan wrote:
> Allow the dm driver be omitted by SPL.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  drivers/power/pmic/Makefile      | 4 ++--
>  drivers/power/regulator/Makefile | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index f7bdfa5609..4abdaf6668 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -5,10 +5,10 @@
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
>  
> -obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC) += pmic-uclass.o
>  obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
>  obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
> -obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
>  obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
>  obj-$(CONFIG_PMIC_ACT8846) += act8846.o
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> index 6c149a9263..9809f7c845 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
>  obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
>  obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
>  obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
> -obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
> 
Reviewed-by: Stefano Babic <sbabic@denx.de>

Best regards,
Stefano Babic
Fabio Estevam Dec. 16, 2017, 5:43 p.m. UTC | #2 
On Mon, Dec 4, 2017 at 2:31 AM, Peng Fan <peng.fan@nxp.com> wrote:
> Allow the dm driver be omitted by SPL.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Stefano Babic <sbabic@denx.de>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Stefano Babic Dec. 17, 2017, 10:33 a.m. UTC | #3 
On 04/12/2017 05:31, Peng Fan wrote:
> Allow the dm driver be omitted by SPL.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  drivers/power/pmic/Makefile      | 4 ++--
>  drivers/power/regulator/Makefile | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index f7bdfa5609..4abdaf6668 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -5,10 +5,10 @@
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
>  
> -obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC) += pmic-uclass.o
>  obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
>  obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
> -obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
>  obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
>  obj-$(CONFIG_PMIC_ACT8846) += act8846.o
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> index 6c149a9263..9809f7c845 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
>  obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
>  obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
>  obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
> -obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
> +obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>  obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index f7bdfa5609..4abdaf6668 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -5,10 +5,10 @@ 
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
+obj-$(CONFIG_$(SPL_)DM_PMIC) += pmic-uclass.o
 obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
 obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
-obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
 obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
 obj-$(CONFIG_PMIC_ACT8846) += act8846.o
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index 6c149a9263..9809f7c845 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -9,7 +9,7 @@  obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
 obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
 obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
-obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
+obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
 obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o