Message ID | 1513302496-22888-1-git-send-email-f.fainelli@gmail.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
Series | [net-next] net: phy: broadcom: Add entry for 5395 switch PHYs | expand |
Tested-by: Chris Healy <cphealy@gmail.com> Successfully tested on a machine with a Broadcom BCM5395 switch. On Thu, Dec 14, 2017 at 5:48 PM, Florian Fainelli <f.fainelli@gmail.com> wrote: > Add an entry for the builtin PHYs present in the Broadcom BCM5395 switch. This > allows us to retrieve the PHY statistics among other things. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > drivers/net/phy/broadcom.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > include/linux/brcmphy.h | 1 + > 2 files changed, 43 insertions(+) > > diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c > index a8f69c5777bc..3bb6b66dc7bf 100644 > --- a/drivers/net/phy/broadcom.c > +++ b/drivers/net/phy/broadcom.c > @@ -540,6 +540,37 @@ static int brcm_fet_config_intr(struct phy_device *phydev) > return err; > } > > +struct bcm53xx_phy_priv { > + u64 *stats; > +}; > + > +static int bcm53xx_phy_probe(struct phy_device *phydev) > +{ > + struct bcm53xx_phy_priv *priv; > + > + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + phydev->priv = priv; > + > + priv->stats = devm_kcalloc(&phydev->mdio.dev, > + bcm_phy_get_sset_count(phydev), sizeof(u64), > + GFP_KERNEL); > + if (!priv->stats) > + return -ENOMEM; > + > + return 0; > +} > + > +static void bcm53xx_phy_get_stats(struct phy_device *phydev, > + struct ethtool_stats *stats, u64 *data) > +{ > + struct bcm53xx_phy_priv *priv = phydev->priv; > + > + bcm_phy_get_stats(phydev, priv->stats, stats, data); > +} > + > static struct phy_driver broadcom_drivers[] = { > { > .phy_id = PHY_ID_BCM5411, > @@ -679,6 +710,16 @@ static struct phy_driver broadcom_drivers[] = { > .config_init = brcm_fet_config_init, > .ack_interrupt = brcm_fet_ack_interrupt, > .config_intr = brcm_fet_config_intr, > +}, { > + .phy_id = PHY_ID_BCM5395, > + .phy_id_mask = 0xfffffff0, > + .name = "Broadcom BCM5395", > + .flags = PHY_IS_INTERNAL, > + .features = PHY_GBIT_FEATURES, > + .get_sset_count = bcm_phy_get_sset_count, > + .get_strings = bcm_phy_get_strings, > + .get_stats = bcm53xx_phy_get_stats, > + .probe = bcm53xx_phy_probe, > } }; > > module_phy_driver(broadcom_drivers); > @@ -699,6 +740,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { > { PHY_ID_BCM57780, 0xfffffff0 }, > { PHY_ID_BCMAC131, 0xfffffff0 }, > { PHY_ID_BCM5241, 0xfffffff0 }, > + { PHY_ID_BCM5395, 0xfffffff0 }, > { } > }; > > diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h > index 8ff86b4c1b8a..d3339dd48b1a 100644 > --- a/include/linux/brcmphy.h > +++ b/include/linux/brcmphy.h > @@ -14,6 +14,7 @@ > #define PHY_ID_BCM5241 0x0143bc30 > #define PHY_ID_BCMAC131 0x0143bc70 > #define PHY_ID_BCM5481 0x0143bca0 > +#define PHY_ID_BCM5395 0x0143bcf0 > #define PHY_ID_BCM54810 0x03625d00 > #define PHY_ID_BCM5482 0x0143bcb0 > #define PHY_ID_BCM5411 0x00206070 > -- > 2.7.4 >
On Thu, Dec 14, 2017 at 05:48:16PM -0800, Florian Fainelli wrote: > Add an entry for the builtin PHYs present in the Broadcom BCM5395 switch. This > allows us to retrieve the PHY statistics among other things. > static struct phy_driver broadcom_drivers[] = { > { > .phy_id = PHY_ID_BCM5411, > @@ -679,6 +710,16 @@ static struct phy_driver broadcom_drivers[] = { > .config_init = brcm_fet_config_init, > .ack_interrupt = brcm_fet_ack_interrupt, > .config_intr = brcm_fet_config_intr, > +}, { > + .phy_id = PHY_ID_BCM5395, > + .phy_id_mask = 0xfffffff0, > + .name = "Broadcom BCM5395", > + .flags = PHY_IS_INTERNAL, > + .features = PHY_GBIT_FEATURES, > + .get_sset_count = bcm_phy_get_sset_count, > + .get_strings = bcm_phy_get_strings, > + .get_stats = bcm53xx_phy_get_stats, > + .probe = bcm53xx_phy_probe, > } }; Hi Florian Is this the only PHY supported by this driver which has statistics? Andrew
On December 15, 2017 1:10:44 AM PST, Andrew Lunn <andrew@lunn.ch> wrote: >On Thu, Dec 14, 2017 at 05:48:16PM -0800, Florian Fainelli wrote: >> Add an entry for the builtin PHYs present in the Broadcom BCM5395 >switch. This >> allows us to retrieve the PHY statistics among other things. > >> static struct phy_driver broadcom_drivers[] = { >> { >> .phy_id = PHY_ID_BCM5411, >> @@ -679,6 +710,16 @@ static struct phy_driver broadcom_drivers[] = { >> .config_init = brcm_fet_config_init, >> .ack_interrupt = brcm_fet_ack_interrupt, >> .config_intr = brcm_fet_config_intr, >> +}, { >> + .phy_id = PHY_ID_BCM5395, >> + .phy_id_mask = 0xfffffff0, >> + .name = "Broadcom BCM5395", >> + .flags = PHY_IS_INTERNAL, >> + .features = PHY_GBIT_FEATURES, >> + .get_sset_count = bcm_phy_get_sset_count, >> + .get_strings = bcm_phy_get_strings, >> + .get_stats = bcm53xx_phy_get_stats, >> + .probe = bcm53xx_phy_probe, >> } }; > >Hi Florian > >Is this the only PHY supported by this driver which has statistics? I need to cross check with the various data sheets to be sure, but it is quite likely that all Gigabit capable PHYs listed above would also support the same statistics. In any case, this would be a follow on patch to this one. Thanks! > > Andrew Hi Andrew,
From: Florian Fainelli <f.fainelli@gmail.com> Date: Thu, 14 Dec 2017 17:48:16 -0800 > Add an entry for the builtin PHYs present in the Broadcom BCM5395 switch. This > allows us to retrieve the PHY statistics among other things. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Applied, thanks Florian.
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index a8f69c5777bc..3bb6b66dc7bf 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -540,6 +540,37 @@ static int brcm_fet_config_intr(struct phy_device *phydev) return err; } +struct bcm53xx_phy_priv { + u64 *stats; +}; + +static int bcm53xx_phy_probe(struct phy_device *phydev) +{ + struct bcm53xx_phy_priv *priv; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + priv->stats = devm_kcalloc(&phydev->mdio.dev, + bcm_phy_get_sset_count(phydev), sizeof(u64), + GFP_KERNEL); + if (!priv->stats) + return -ENOMEM; + + return 0; +} + +static void bcm53xx_phy_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + struct bcm53xx_phy_priv *priv = phydev->priv; + + bcm_phy_get_stats(phydev, priv->stats, stats, data); +} + static struct phy_driver broadcom_drivers[] = { { .phy_id = PHY_ID_BCM5411, @@ -679,6 +710,16 @@ static struct phy_driver broadcom_drivers[] = { .config_init = brcm_fet_config_init, .ack_interrupt = brcm_fet_ack_interrupt, .config_intr = brcm_fet_config_intr, +}, { + .phy_id = PHY_ID_BCM5395, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5395", + .flags = PHY_IS_INTERNAL, + .features = PHY_GBIT_FEATURES, + .get_sset_count = bcm_phy_get_sset_count, + .get_strings = bcm_phy_get_strings, + .get_stats = bcm53xx_phy_get_stats, + .probe = bcm53xx_phy_probe, } }; module_phy_driver(broadcom_drivers); @@ -699,6 +740,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM57780, 0xfffffff0 }, { PHY_ID_BCMAC131, 0xfffffff0 }, { PHY_ID_BCM5241, 0xfffffff0 }, + { PHY_ID_BCM5395, 0xfffffff0 }, { } }; diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 8ff86b4c1b8a..d3339dd48b1a 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -14,6 +14,7 @@ #define PHY_ID_BCM5241 0x0143bc30 #define PHY_ID_BCMAC131 0x0143bc70 #define PHY_ID_BCM5481 0x0143bca0 +#define PHY_ID_BCM5395 0x0143bcf0 #define PHY_ID_BCM54810 0x03625d00 #define PHY_ID_BCM5482 0x0143bcb0 #define PHY_ID_BCM5411 0x00206070
Add an entry for the builtin PHYs present in the Broadcom BCM5395 switch. This allows us to retrieve the PHY statistics among other things. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/phy/broadcom.c | 42 ++++++++++++++++++++++++++++++++++++++++++ include/linux/brcmphy.h | 1 + 2 files changed, 43 insertions(+)