| Message ID | 1512626365-22845-1-git-send-email-ego@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] cpufreq: powernv: Correctly parse the sign of pstates on POWER8 vs POWER9 | expand |
On Thu, Dec 7, 2017 at 6:59 AM, Gautham R. Shenoy <ego@linux.vnet.ibm.com> wrote: > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> > > On POWERNV platform, Pstates are 8-bit values. On POWER8 they are > negatively numbered while on POWER9 they are positively > numbered. Thus, on POWER9, the maximum number of pstates could be as > high as 256. > > The current code interprets pstates as a signed 8-bit value. This > causes a problem on POWER9 platforms which have more than 128 pstates. > On such systems, on a CPU that is in a lower pstate whose number is > greater than 128, querying the current pstate returns a "pstate X is > out of bound" error message and the current pstate is reported as the > nominal pstate. > > This patch fixes the aforementioned issue by correctly differentiating > the sign whenever a pstate value read, depending on whether the > pstates are positively numbered or negatively numbered. > > Fixes: commit 09ca4c9b5958 ("cpufreq: powernv: Replacing pstate_id with frequency table index") > Cc: <stable@vger.kernel.org> #v4.8 > Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> > Tested-and-reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> I'm going to apply this, or please let me know if you want to route it differently. > --- > drivers/cpufreq/powernv-cpufreq.c | 43 ++++++++++++++++++++++++++++++--------- > 1 file changed, 33 insertions(+), 10 deletions(-) > > diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c > index b6d7c4c..bb7586e 100644 > --- a/drivers/cpufreq/powernv-cpufreq.c > +++ b/drivers/cpufreq/powernv-cpufreq.c > @@ -41,11 +41,14 @@ > #define POWERNV_MAX_PSTATES 256 > #define PMSR_PSAFE_ENABLE (1UL << 30) > #define PMSR_SPR_EM_DISABLE (1UL << 31) > -#define PMSR_MAX(x) ((x >> 32) & 0xFF) > +#define EXTRACT_BYTE(x, shift) (((x) >> shift) & 0xFF) > +#define MAX_SHIFT 32 > #define LPSTATE_SHIFT 48 > #define GPSTATE_SHIFT 56 > -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) > -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) > +#define GET_PMSR_MAX(x) EXTRACT_BYTE(x, MAX_SHIFT) > +#define GET_LPSTATE(x) EXTRACT_BYTE(x, LPSTATE_SHIFT) > +#define GET_GPSTATE(x) EXTRACT_BYTE(x, GPSTATE_SHIFT) > + > > #define MAX_RAMP_DOWN_TIME 5120 > /* > @@ -64,6 +67,12 @@ > > /* Interval after which the timer is queued to bring down global pstate */ > #define GPSTATE_TIMER_INTERVAL 2000 > +/* > + * On POWER8 the pstates are negatively numbered. On POWER9, they are > + * positively numbered. Use this flag to track whether we have > + * positive or negative numbered pstates. > + */ > +static bool pos_pstates; > > /** > * struct global_pstate_info - Per policy data structure to maintain history of > @@ -164,7 +173,7 @@ static inline unsigned int pstate_to_idx(int pstate) > int min = powernv_freqs[powernv_pstate_info.min].driver_data; > int max = powernv_freqs[powernv_pstate_info.max].driver_data; > > - if (min > 0) { > + if (pos_pstates) { > if (unlikely((pstate < max) || (pstate > min))) { > pr_warn_once("pstate %d is out of bound\n", pstate); > return powernv_pstate_info.nominal; > @@ -301,6 +310,9 @@ static int init_powernv_pstates(void) > } > } > > + if ((int)pstate_min > 0) > + pos_pstates = true; > + > /* End of list marker entry */ > powernv_freqs[i].frequency = CPUFREQ_TABLE_END; > return 0; > @@ -438,7 +450,6 @@ struct powernv_smp_call_data { > static void powernv_read_cpu_freq(void *arg) > { > unsigned long pmspr_val; > - s8 local_pstate_id; > struct powernv_smp_call_data *freq_data = arg; > > pmspr_val = get_pmspr(SPRN_PMSR); > @@ -447,8 +458,11 @@ static void powernv_read_cpu_freq(void *arg) > * The local pstate id corresponds bits 48..55 in the PMSR. > * Note: Watch out for the sign! > */ > - local_pstate_id = (pmspr_val >> 48) & 0xFF; > - freq_data->pstate_id = local_pstate_id; > + if (pos_pstates) > + freq_data->pstate_id = (u8)GET_LPSTATE(pmspr_val); > + else > + freq_data->pstate_id = (s8)GET_LPSTATE(pmspr_val); > + > freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); > > pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n", > @@ -522,7 +536,10 @@ static void powernv_cpufreq_throttle_check(void *data) > chip = this_cpu_read(chip_info); > > /* Check for Pmax Capping */ > - pmsr_pmax = (s8)PMSR_MAX(pmsr); > + if (pos_pstates) > + pmsr_pmax = (u8)GET_PMSR_MAX(pmsr); > + else > + pmsr_pmax = (s8)GET_PMSR_MAX(pmsr); > pmsr_pmax_idx = pstate_to_idx(pmsr_pmax); > if (pmsr_pmax_idx != powernv_pstate_info.max) { > if (chip->throttled) > @@ -645,8 +662,14 @@ void gpstate_timer_handler(struct timer_list *t) > * value. Hence, read from PMCR to get correct data. > */ > val = get_pmspr(SPRN_PMCR); > - freq_data.gpstate_id = (s8)GET_GPSTATE(val); > - freq_data.pstate_id = (s8)GET_LPSTATE(val); > + if (pos_pstates) { > + freq_data.gpstate_id = (u8)GET_GPSTATE(val); > + freq_data.pstate_id = (u8)GET_LPSTATE(val); > + } else { > + freq_data.gpstate_id = (s8)GET_GPSTATE(val); > + freq_data.pstate_id = (s8)GET_LPSTATE(val); > + } > + > if (freq_data.gpstate_id == freq_data.pstate_id) { > reset_gpstates(policy); > spin_unlock(&gpstates->gpstate_lock); > -- > 1.8.3.1 >
On Thu, Dec 7, 2017 at 4:59 PM, Gautham R. Shenoy <ego@linux.vnet.ibm.com> wrote: > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> > > On POWERNV platform, Pstates are 8-bit values. On POWER8 they are > negatively numbered while on POWER9 they are positively > numbered. Thus, on POWER9, the maximum number of pstates could be as > high as 256. > > The current code interprets pstates as a signed 8-bit value. This > causes a problem on POWER9 platforms which have more than 128 pstates. > On such systems, on a CPU that is in a lower pstate whose number is > greater than 128, querying the current pstate returns a "pstate X is > out of bound" error message and the current pstate is reported as the > nominal pstate. > > This patch fixes the aforementioned issue by correctly differentiating > the sign whenever a pstate value read, depending on whether the > pstates are positively numbered or negatively numbered. Yikes! Is there no better way of fixing this? > > Fixes: commit 09ca4c9b5958 ("cpufreq: powernv: Replacing pstate_id with frequency table index") > Cc: <stable@vger.kernel.org> #v4.8 > Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> > Tested-and-reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > drivers/cpufreq/powernv-cpufreq.c | 43 ++++++++++++++++++++++++++++++--------- > 1 file changed, 33 insertions(+), 10 deletions(-) > > diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c > index b6d7c4c..bb7586e 100644 > --- a/drivers/cpufreq/powernv-cpufreq.c > +++ b/drivers/cpufreq/powernv-cpufreq.c > @@ -41,11 +41,14 @@ > #define POWERNV_MAX_PSTATES 256 > #define PMSR_PSAFE_ENABLE (1UL << 30) > #define PMSR_SPR_EM_DISABLE (1UL << 31) > -#define PMSR_MAX(x) ((x >> 32) & 0xFF) > +#define EXTRACT_BYTE(x, shift) (((x) >> shift) & 0xFF) > +#define MAX_SHIFT 32 > #define LPSTATE_SHIFT 48 > #define GPSTATE_SHIFT 56 > -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) > -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) > +#define GET_PMSR_MAX(x) EXTRACT_BYTE(x, MAX_SHIFT) > +#define GET_LPSTATE(x) EXTRACT_BYTE(x, LPSTATE_SHIFT) > +#define GET_GPSTATE(x) EXTRACT_BYTE(x, GPSTATE_SHIFT) > + Can you hide all of this in pstate_to_idx(), do the casting inside? I was reviewing this code earlier before being distracted with something else, this did come across as strange and I was looking at using abs values to simplify the code, but I did not get to it. Balbir Singh.
"Rafael J. Wysocki" <rafael@kernel.org> writes: > On Thu, Dec 7, 2017 at 6:59 AM, Gautham R. Shenoy > <ego@linux.vnet.ibm.com> wrote: >> From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> >> >> On POWERNV platform, Pstates are 8-bit values. On POWER8 they are >> negatively numbered while on POWER9 they are positively >> numbered. Thus, on POWER9, the maximum number of pstates could be as >> high as 256. >> >> The current code interprets pstates as a signed 8-bit value. This >> causes a problem on POWER9 platforms which have more than 128 pstates. >> On such systems, on a CPU that is in a lower pstate whose number is >> greater than 128, querying the current pstate returns a "pstate X is >> out of bound" error message and the current pstate is reported as the >> nominal pstate. >> >> This patch fixes the aforementioned issue by correctly differentiating >> the sign whenever a pstate value read, depending on whether the >> pstates are positively numbered or negatively numbered. >> >> Fixes: commit 09ca4c9b5958 ("cpufreq: powernv: Replacing pstate_id with frequency table index") >> Cc: <stable@vger.kernel.org> #v4.8 >> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> >> Tested-and-reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> >> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > > I'm going to apply this, or please let me know if you want to route it > differently. Do you mind waiting for now, we're still debating how to fix it. cheers
On Fri, Dec 8, 2017 at 12:47 PM, Michael Ellerman <mpe@ellerman.id.au> wrote: > "Rafael J. Wysocki" <rafael@kernel.org> writes: > >> On Thu, Dec 7, 2017 at 6:59 AM, Gautham R. Shenoy >> <ego@linux.vnet.ibm.com> wrote: >>> From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> >>> >>> On POWERNV platform, Pstates are 8-bit values. On POWER8 they are >>> negatively numbered while on POWER9 they are positively >>> numbered. Thus, on POWER9, the maximum number of pstates could be as >>> high as 256. >>> >>> The current code interprets pstates as a signed 8-bit value. This >>> causes a problem on POWER9 platforms which have more than 128 pstates. >>> On such systems, on a CPU that is in a lower pstate whose number is >>> greater than 128, querying the current pstate returns a "pstate X is >>> out of bound" error message and the current pstate is reported as the >>> nominal pstate. >>> >>> This patch fixes the aforementioned issue by correctly differentiating >>> the sign whenever a pstate value read, depending on whether the >>> pstates are positively numbered or negatively numbered. >>> >>> Fixes: commit 09ca4c9b5958 ("cpufreq: powernv: Replacing pstate_id with frequency table index") >>> Cc: <stable@vger.kernel.org> #v4.8 >>> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> >>> Tested-and-reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> >>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> >> >> I'm going to apply this, or please let me know if you want to route it >> differently. > > Do you mind waiting for now, we're still debating how to fix it. No problem. :-) Just please let me know when you're ready.
Hi Balbir, On Fri, Dec 08, 2017 at 02:44:40PM +1100, Balbir Singh wrote: > On Thu, Dec 7, 2017 at 4:59 PM, Gautham R. Shenoy > <ego@linux.vnet.ibm.com> wrote: > > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> > > > > On POWERNV platform, Pstates are 8-bit values. On POWER8 they are > > negatively numbered while on POWER9 they are positively > > numbered. Thus, on POWER9, the maximum number of pstates could be as > > high as 256. > > > > The current code interprets pstates as a signed 8-bit value. This > > causes a problem on POWER9 platforms which have more than 128 pstates. > > On such systems, on a CPU that is in a lower pstate whose number is > > greater than 128, querying the current pstate returns a "pstate X is > > out of bound" error message and the current pstate is reported as the > > nominal pstate. > > > > This patch fixes the aforementioned issue by correctly differentiating > > the sign whenever a pstate value read, depending on whether the > > pstates are positively numbered or negatively numbered. > > Yikes! Is there no better way of fixing this? There is. In fact, I am working on cleaning up the whole thing to make it not depend on the sign until it is really needed (and that is to check whether the pstate that we read from the PMSR is within bounds) Besides, currently the kernel code assumes a few things that the device-tree doesn't guarantee, such as the continguity of pstates. > > > > > Fixes: commit 09ca4c9b5958 ("cpufreq: powernv: Replacing pstate_id with frequency table index") > > Cc: <stable@vger.kernel.org> #v4.8 > > Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> > > Tested-and-reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > > --- > > drivers/cpufreq/powernv-cpufreq.c | 43 ++++++++++++++++++++++++++++++--------- > > 1 file changed, 33 insertions(+), 10 deletions(-) > > > > diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c > > index b6d7c4c..bb7586e 100644 > > --- a/drivers/cpufreq/powernv-cpufreq.c > > +++ b/drivers/cpufreq/powernv-cpufreq.c > > @@ -41,11 +41,14 @@ > > #define POWERNV_MAX_PSTATES 256 > > #define PMSR_PSAFE_ENABLE (1UL << 30) > > #define PMSR_SPR_EM_DISABLE (1UL << 31) > > -#define PMSR_MAX(x) ((x >> 32) & 0xFF) > > +#define EXTRACT_BYTE(x, shift) (((x) >> shift) & 0xFF) > > +#define MAX_SHIFT 32 > > #define LPSTATE_SHIFT 48 > > #define GPSTATE_SHIFT 56 > > -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) > > -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) > > +#define GET_PMSR_MAX(x) EXTRACT_BYTE(x, MAX_SHIFT) > > +#define GET_LPSTATE(x) EXTRACT_BYTE(x, LPSTATE_SHIFT) > > +#define GET_GPSTATE(x) EXTRACT_BYTE(x, GPSTATE_SHIFT) > > + > > Can you hide all of this in pstate_to_idx(), do the casting inside? I > was reviewing this > code earlier before being distracted with something else, this did > come across as > strange and I was looking at using abs values to simplify the code, > but I did not get > to it. > > Balbir Singh. >
diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index b6d7c4c..bb7586e 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -41,11 +41,14 @@ #define POWERNV_MAX_PSTATES 256 #define PMSR_PSAFE_ENABLE (1UL << 30) #define PMSR_SPR_EM_DISABLE (1UL << 31) -#define PMSR_MAX(x) ((x >> 32) & 0xFF) +#define EXTRACT_BYTE(x, shift) (((x) >> shift) & 0xFF) +#define MAX_SHIFT 32 #define LPSTATE_SHIFT 48 #define GPSTATE_SHIFT 56 -#define GET_LPSTATE(x) (((x) >> LPSTATE_SHIFT) & 0xFF) -#define GET_GPSTATE(x) (((x) >> GPSTATE_SHIFT) & 0xFF) +#define GET_PMSR_MAX(x) EXTRACT_BYTE(x, MAX_SHIFT) +#define GET_LPSTATE(x) EXTRACT_BYTE(x, LPSTATE_SHIFT) +#define GET_GPSTATE(x) EXTRACT_BYTE(x, GPSTATE_SHIFT) + #define MAX_RAMP_DOWN_TIME 5120 /* @@ -64,6 +67,12 @@ /* Interval after which the timer is queued to bring down global pstate */ #define GPSTATE_TIMER_INTERVAL 2000 +/* + * On POWER8 the pstates are negatively numbered. On POWER9, they are + * positively numbered. Use this flag to track whether we have + * positive or negative numbered pstates. + */ +static bool pos_pstates; /** * struct global_pstate_info - Per policy data structure to maintain history of @@ -164,7 +173,7 @@ static inline unsigned int pstate_to_idx(int pstate) int min = powernv_freqs[powernv_pstate_info.min].driver_data; int max = powernv_freqs[powernv_pstate_info.max].driver_data; - if (min > 0) { + if (pos_pstates) { if (unlikely((pstate < max) || (pstate > min))) { pr_warn_once("pstate %d is out of bound\n", pstate); return powernv_pstate_info.nominal; @@ -301,6 +310,9 @@ static int init_powernv_pstates(void) } } + if ((int)pstate_min > 0) + pos_pstates = true; + /* End of list marker entry */ powernv_freqs[i].frequency = CPUFREQ_TABLE_END; return 0; @@ -438,7 +450,6 @@ struct powernv_smp_call_data { static void powernv_read_cpu_freq(void *arg) { unsigned long pmspr_val; - s8 local_pstate_id; struct powernv_smp_call_data *freq_data = arg; pmspr_val = get_pmspr(SPRN_PMSR); @@ -447,8 +458,11 @@ static void powernv_read_cpu_freq(void *arg) * The local pstate id corresponds bits 48..55 in the PMSR. * Note: Watch out for the sign! */ - local_pstate_id = (pmspr_val >> 48) & 0xFF; - freq_data->pstate_id = local_pstate_id; + if (pos_pstates) + freq_data->pstate_id = (u8)GET_LPSTATE(pmspr_val); + else + freq_data->pstate_id = (s8)GET_LPSTATE(pmspr_val); + freq_data->freq = pstate_id_to_freq(freq_data->pstate_id); pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n", @@ -522,7 +536,10 @@ static void powernv_cpufreq_throttle_check(void *data) chip = this_cpu_read(chip_info); /* Check for Pmax Capping */ - pmsr_pmax = (s8)PMSR_MAX(pmsr); + if (pos_pstates) + pmsr_pmax = (u8)GET_PMSR_MAX(pmsr); + else + pmsr_pmax = (s8)GET_PMSR_MAX(pmsr); pmsr_pmax_idx = pstate_to_idx(pmsr_pmax); if (pmsr_pmax_idx != powernv_pstate_info.max) { if (chip->throttled) @@ -645,8 +662,14 @@ void gpstate_timer_handler(struct timer_list *t) * value. Hence, read from PMCR to get correct data. */ val = get_pmspr(SPRN_PMCR); - freq_data.gpstate_id = (s8)GET_GPSTATE(val); - freq_data.pstate_id = (s8)GET_LPSTATE(val); + if (pos_pstates) { + freq_data.gpstate_id = (u8)GET_GPSTATE(val); + freq_data.pstate_id = (u8)GET_LPSTATE(val); + } else { + freq_data.gpstate_id = (s8)GET_GPSTATE(val); + freq_data.pstate_id = (s8)GET_LPSTATE(val); + } + if (freq_data.gpstate_id == freq_data.pstate_id) { reset_gpstates(policy); spin_unlock(&gpstates->gpstate_lock);