@@ -201,7 +201,9 @@
#define OPAL_SET_POWER_SHIFT_RATIO 155
#define OPAL_SENSOR_GROUP_CLEAR 156
#define OPAL_PCI_SET_P2P 157
-#define OPAL_LAST 157
+#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 158
+#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 159
+#define OPAL_LAST 159
/* Device tree flags */
@@ -198,6 +198,8 @@ int64_t opal_unregister_dump_region(uint32_t id);
int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
+int64_t opal_pci_get_pbcq_tunnel_bar(uint64_t phb_id, uint64_t *addr);
+int64_t opal_pci_set_pbcq_tunnel_bar(uint64_t phb_id, uint64_t addr);
int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg,
uint64_t msg_len);
int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
@@ -28,7 +28,9 @@ extern int pnv_pci_set_power_state(uint64_t id, uint8_t state,
struct opal_msg *msg);
extern int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target,
u64 desc);
-
+extern int pnv_pci_get_tunnel_ind(struct pci_dev *dev, uint64_t *ind);
+extern int pnv_pci_set_tunnel_bar(struct pci_dev *dev, uint64_t addr,
+ int enable);
int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
unsigned int virq);
@@ -320,3 +320,5 @@ OPAL_CALL(opal_set_powercap, OPAL_SET_POWERCAP);
OPAL_CALL(opal_get_power_shift_ratio, OPAL_GET_POWER_SHIFT_RATIO);
OPAL_CALL(opal_set_power_shift_ratio, OPAL_SET_POWER_SHIFT_RATIO);
OPAL_CALL(opal_sensor_group_clear, OPAL_SENSOR_GROUP_CLEAR);
+OPAL_CALL(opal_pci_get_pbcq_tunnel_bar, OPAL_PCI_GET_PBCQ_TUNNEL_BAR);
+OPAL_CALL(opal_pci_set_pbcq_tunnel_bar, OPAL_PCI_SET_PBCQ_TUNNEL_BAR);
@@ -38,6 +38,7 @@
#include "pci.h"
static DEFINE_MUTEX(p2p_mutex);
+static DEFINE_MUTEX(tunnel_mutex);
int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id)
{
@@ -1092,6 +1093,74 @@ int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc)
}
EXPORT_SYMBOL_GPL(pnv_pci_set_p2p);
+int pnv_pci_get_tunnel_ind(struct pci_dev *dev, u64 *asnind)
+{
+ struct device_node *np;
+ const __be32 *prop;
+
+ if (!(np = pnv_pci_get_phb_node(dev)))
+ return -ENXIO;
+
+ prop = of_get_property(np, "ibm,phb-indications", NULL);
+ if (!prop || !prop[1])
+ return -ENXIO;
+
+ *asnind = (u64)be32_to_cpu(prop[1]);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_get_tunnel_ind);
+
+int pnv_pci_set_tunnel_bar(struct pci_dev *dev, u64 addr, int enable)
+{
+ __be64 val;
+ struct pci_controller *hose;
+ struct pnv_phb *phb;
+ u64 tunnel_bar;
+ int rc;
+
+ if (!opal_check_token(OPAL_PCI_GET_PBCQ_TUNNEL_BAR))
+ return -ENXIO;
+ if (!opal_check_token(OPAL_PCI_SET_PBCQ_TUNNEL_BAR))
+ return -ENXIO;
+
+ hose = pci_bus_to_host(dev->bus);
+ phb = hose->private_data;
+
+ mutex_lock(&tunnel_mutex);
+ rc = opal_pci_get_pbcq_tunnel_bar(phb->opal_id, &val);
+ if (rc != OPAL_SUCCESS) {
+ rc = -EIO;
+ goto out;
+ }
+ tunnel_bar = be64_to_cpu(val);
+ if (enable) {
+ /*
+ * Only one device per PHB can use atomics.
+ * Our policy is first-come, first-served.
+ */
+ if (tunnel_bar) {
+ rc = -EBUSY;
+ goto out;
+ }
+ } else {
+ /*
+ * The device that owns atomics and wants to release
+ * them must pass the same address with enable == 0.
+ */
+ if (tunnel_bar != addr) {
+ rc = -EPERM;
+ goto out;
+ }
+ addr = 0x0ULL;
+ }
+ rc = opal_pci_set_pbcq_tunnel_bar(phb->opal_id, addr);
+ rc = opal_error_code(rc);
+out:
+ mutex_unlock(&tunnel_mutex);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pnv_pci_set_tunnel_bar);
+
void pnv_pci_shutdown(void)
{
struct pci_controller *hose;
P9 supports PCI tunneled operations (atomics and as_notify). This patch adds support for tunneled operations on powernv, with a new API, to be called by device drivers: pnv_pci_get_tunnel_ind() Tell driver the 16-bit ASN indication used by kernel. pnv_pci_set_tunnel_bar() Tell kernel the Tunnel BAR Response address used by driver. The latter uses two new OPAL calls, as the PBCQ Tunnel BAR register is configured by skiboot. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> --- Changelog: v2: Do not set the ASN indication. Get it from the device tree. This patch depends on the following skiboot prerequisites: https://patchwork.ozlabs.org/patch/843474/ https://patchwork.ozlabs.org/patch/843473/ --- arch/powerpc/include/asm/opal-api.h | 4 +- arch/powerpc/include/asm/opal.h | 2 + arch/powerpc/include/asm/pnv-pci.h | 4 +- arch/powerpc/platforms/powernv/opal-wrappers.S | 2 + arch/powerpc/platforms/powernv/pci.c | 69 ++++++++++++++++++++++++++ 5 files changed, 79 insertions(+), 2 deletions(-)