| Message ID | 20171108194334.10031-2-geomatsi@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | orangepi_pc_plus: new board and its drivers | expand |
Hello, On Wed, 8 Nov 2017 22:43:32 +0300, Sergey Matyukevich wrote: > This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek > RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot > and kernel. So it makes sense to create a separate entry > for this board in buildroot. > > Board support package includes the following components: > - mainline u-boot 2017.09 > - mainline kernel 4.13.11 > > Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> I've applied, after adding an entry to the DEVELOPERS file. One comment, though. > board/orangepi/orangepi-pc-plus/boot.cmd | 8 +++++ > board/orangepi/orangepi-pc-plus/genimage.cfg | 36 ++++++++++++++++++++ > .../orangepi/orangepi-pc-plus/linux-extras.config | 8 +++++ > board/orangepi/orangepi-pc-plus/post-build.sh | 1 + This common post-build script only generates the U-Boot script. Could you move the boards that use this post-build script to instead use BR2_TARGET_UBOOT_BOOT_SCRIPT ? Thanks! Thomas
Hello Thomas, > On Wed, 8 Nov 2017 22:43:32 +0300, Sergey Matyukevich wrote: > > This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek > > RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot > > and kernel. So it makes sense to create a separate entry > > for this board in buildroot. > > > > Board support package includes the following components: > > - mainline u-boot 2017.09 > > - mainline kernel 4.13.11 > > > > Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> > > I've applied, after adding an entry to the DEVELOPERS file. One > comment, though. > > > board/orangepi/orangepi-pc-plus/boot.cmd | 8 +++++ > > board/orangepi/orangepi-pc-plus/genimage.cfg | 36 ++++++++++++++++++++ > > .../orangepi/orangepi-pc-plus/linux-extras.config | 8 +++++ > > board/orangepi/orangepi-pc-plus/post-build.sh | 1 + > > This common post-build script only generates the U-Boot script. Could > you move the boards that use this post-build script to instead use > BR2_TARGET_UBOOT_BOOT_SCRIPT ? Sure, will do this cleanup with orangepi/pcduino boards as soon as I complete MacchiatoBin pieces. Regards, Sergey
diff --git a/board/orangepi/orangepi-pc-plus/boot.cmd b/board/orangepi/orangepi-pc-plus/boot.cmd new file mode 100644 index 0000000000..0c75c862e0 --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/boot.cmd @@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-pc-plus.dtb + +bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/orangepi/orangepi-pc-plus/genimage.cfg b/board/orangepi/orangepi-pc-plus/genimage.cfg new file mode 100644 index 0000000000..9ffa1a21ae --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/genimage.cfg @@ -0,0 +1,36 @@ +# Minimal SD card image for the OrangePi PC Plus +# +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h3-orangepi-pc-plus.dtb", + "boot.scr" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/orangepi/orangepi-pc-plus/linux-extras.config b/board/orangepi/orangepi-pc-plus/linux-extras.config new file mode 100644 index 0000000000..5e3af2b831 --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/linux-extras.config @@ -0,0 +1,8 @@ +# wireless core +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_CFG80211_WEXT=y + +# wireless drivers +CONFIG_WLAN=y diff --git a/board/orangepi/orangepi-pc-plus/post-build.sh b/board/orangepi/orangepi-pc-plus/post-build.sh new file mode 120000 index 0000000000..cd7f11645b --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/post-build.sh @@ -0,0 +1 @@ +../post-build.sh \ No newline at end of file diff --git a/board/orangepi/orangepi-pc-plus/post-image.sh b/board/orangepi/orangepi-pc-plus/post-image.sh new file mode 120000 index 0000000000..ae6294fa38 --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/post-image.sh @@ -0,0 +1 @@ +../post-image.sh \ No newline at end of file diff --git a/board/orangepi/orangepi-pc-plus/readme.txt b/board/orangepi/orangepi-pc-plus/readme.txt new file mode 100644 index 0000000000..49206949c8 --- /dev/null +++ b/board/orangepi/orangepi-pc-plus/readme.txt @@ -0,0 +1,29 @@ +OrangePi PC Plus + +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the OrangePi PC Plus. With the current configuration +it will bring-up the board, and allow access through the serial console. + +How to build it +=============== + +Configure Buildroot: + + $ make orangepi_pc_plus_defconfig + +Compile everything and build the SD card image: + + $ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig new file mode 100644 index 0000000000..ec177286cc --- /dev/null +++ b/configs/orangepi_pc_plus_defconfig @@ -0,0 +1,38 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y +BR2_TARGET_GENERIC_HOSTNAME="OrangePi_PC_Plus" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi PC Plus" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-pc-plus/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/orangepi/orangepi-pc-plus/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.11" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-pc-plus" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-pc-plus/linux-extras.config" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.09" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc_plus" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y + +# wireless tools +BR2_PACKAGE_IW=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot and kernel. So it makes sense to create a separate entry for this board in buildroot. Board support package includes the following components: - mainline u-boot 2017.09 - mainline kernel 4.13.11 Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> --- board/orangepi/orangepi-pc-plus/boot.cmd | 8 +++++ board/orangepi/orangepi-pc-plus/genimage.cfg | 36 ++++++++++++++++++++ .../orangepi/orangepi-pc-plus/linux-extras.config | 8 +++++ board/orangepi/orangepi-pc-plus/post-build.sh | 1 + board/orangepi/orangepi-pc-plus/post-image.sh | 1 + board/orangepi/orangepi-pc-plus/readme.txt | 29 +++++++++++++++++ configs/orangepi_pc_plus_defconfig | 38 ++++++++++++++++++++++ 7 files changed, 121 insertions(+) create mode 100644 board/orangepi/orangepi-pc-plus/boot.cmd create mode 100644 board/orangepi/orangepi-pc-plus/genimage.cfg create mode 100644 board/orangepi/orangepi-pc-plus/linux-extras.config create mode 120000 board/orangepi/orangepi-pc-plus/post-build.sh create mode 120000 board/orangepi/orangepi-pc-plus/post-image.sh create mode 100644 board/orangepi/orangepi-pc-plus/readme.txt create mode 100644 configs/orangepi_pc_plus_defconfig