| Message ID | 1510096056-13765-4-git-send-email-timur@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | pinctrl: qcom: add support for sparse GPIOs | expand |
On 11/07, Timur Tabi wrote: > pinctrl-msm only accepts an array of GPIOs from 0 to n-1, and it expects > each group to support have only one pin (npins == 1). > > We can support "sparse" GPIO maps if we allow for some groups to have zero > pins (npins == 0). These pins are "hidden" from the rest of the driver > and gpiolib. > > A new boolean 'sparse' indicates whether the GPIO map is sparse. If any > GPIO has an 'npins' value of 0, then 'sparse' must be set to True. > > Most access to unavailable GPIOs can be blocked via the gpio_chip.request > function. The one exception is when gpiochip_add_data() scans all of If patch 1 is applied is this statement still true? > the GPIOs without "requesting" them. To cover this case, s/GPIOs/GPIOs for their direction/ perhaps? > msm_gpio_get_direction() separately checks if the GPIO is available. >
On 11/16/17 8:43 PM, Stephen Boyd wrote: >> Most access to unavailable GPIOs can be blocked via the gpio_chip.request >> function. The one exception is when gpiochip_add_data() scans all of > If patch 1 is applied is this statement still true? Nope. >> the GPIOs without "requesting" them. To cover this case, > s/GPIOs/GPIOs for their direction/ perhaps? Ok.
On 11/16, Timur Tabi wrote: > On 11/16/17 8:43 PM, Stephen Boyd wrote: > >>Most access to unavailable GPIOs can be blocked via the gpio_chip.request > >>function. The one exception is when gpiochip_add_data() scans all of > > >If patch 1 is applied is this statement still true? > > Nope. > Ok. So what's the point of this patch then? Put another way, is there some path that doesn't request the gpio still even with patch 1 applied?
On 11/17/2017 11:46 AM, Stephen Boyd wrote: > On 11/16, Timur Tabi wrote: >> On 11/16/17 8:43 PM, Stephen Boyd wrote: >>>> Most access to unavailable GPIOs can be blocked via the gpio_chip.request >>>> function. The one exception is when gpiochip_add_data() scans all of >> >>> If patch 1 is applied is this statement still true? >> >> Nope. >> > > Ok. So what's the point of this patch then? Put another way, is > there some path that doesn't request the gpio still even with > patch 1 applied? This patch is how the pinctrl-msm driver actually reports the sparse GPIO map. Patch 1 prevents gpiolib from accessing GPIOs that haven't been properly requested. Patch 2 adds an infrastructure for sparse GPIO maps Patch 3 updates pinctrl-msm to use that expose that new infrastructure Patch 4 updates pinctrl-qdf2xxx to work with the new feature in pinctrl-msm
On 11/17, Timur Tabi wrote: > On 11/17/2017 11:46 AM, Stephen Boyd wrote: > >On 11/16, Timur Tabi wrote: > >>On 11/16/17 8:43 PM, Stephen Boyd wrote: > >>>>Most access to unavailable GPIOs can be blocked via the gpio_chip.request > >>>>function. The one exception is when gpiochip_add_data() scans all of > >> > >>>If patch 1 is applied is this statement still true? > >> > >>Nope. > >> > > > >Ok. So what's the point of this patch then? Put another way, is > >there some path that doesn't request the gpio still even with > >patch 1 applied? > > This patch is how the pinctrl-msm driver actually reports the sparse > GPIO map. > > Patch 1 prevents gpiolib from accessing GPIOs that haven't been > properly requested. > > Patch 2 adds an infrastructure for sparse GPIO maps > > Patch 3 updates pinctrl-msm to use that expose that new infrastructure > > Patch 4 updates pinctrl-qdf2xxx to work with the new feature in pinctrl-msm > Ok. What path doesn't request the gpio though? If we don't have a path that fails to request the gpio before using it then I don't see the need for this patch.
On 11/17/2017 03:42 PM, Stephen Boyd wrote: >> Patch 1 prevents gpiolib from accessing GPIOs that haven't been >> properly requested. >> >> Patch 2 adds an infrastructure for sparse GPIO maps >> >> Patch 3 updates pinctrl-msm to use that expose that new infrastructure >> >> Patch 4 updates pinctrl-qdf2xxx to work with the new feature in pinctrl-msm >> > Ok. What path doesn't request the gpio though? If we don't have a > path that fails to request the gpio before using it then I don't > see the need for this patch. Sorry, I don't understand your question. Patches 2-4 are all about creating a sparse GPIO map. All patch 1 does is stop initializing all the GPIOs with an initial direction.
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index ff491da64dab..66c68a314ca9 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -507,6 +507,11 @@ static void msm_gpio_dbg_show_one(struct seq_file *s, }; g = &pctrl->soc->groups[offset]; + + /* If the GPIO group has no pins, then don't show it. */ + if (!g->npins) + return; + ctl_reg = readl(pctrl->regs + g->ctl_reg); is_out = !!(ctl_reg & BIT(g->oe_bit)); @@ -516,7 +521,7 @@ static void msm_gpio_dbg_show_one(struct seq_file *s, seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func); seq_printf(s, " %dmA", msm_regval_to_drive(drive)); - seq_printf(s, " %s", pulls[pull]); + seq_printf(s, " %s\n", pulls[pull]); } static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) @@ -524,23 +529,36 @@ static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) unsigned gpio = chip->base; unsigned i; - for (i = 0; i < chip->ngpio; i++, gpio++) { + for (i = 0; i < chip->ngpio; i++, gpio++) msm_gpio_dbg_show_one(s, NULL, chip, i, gpio); - seq_puts(s, "\n"); - } } #else #define msm_gpio_dbg_show NULL #endif +/* + * If the requested GPIO has no pins, then treat it as unavailable. + * Otherwise, call the standard request function. + */ +static int msm_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct msm_pinctrl *pctrl = gpiochip_get_data(chip); + const struct msm_pingroup *g = &pctrl->soc->groups[offset]; + + if (!g->npins) + return -ENODEV; + + return gpiochip_generic_request(chip, offset); +} + static const struct gpio_chip msm_gpio_template = { .direction_input = msm_gpio_direction_input, .direction_output = msm_gpio_direction_output, .get_direction = msm_gpio_get_direction, .get = msm_gpio_get, .set = msm_gpio_set, - .request = gpiochip_generic_request, + .request = msm_gpio_request, .free = gpiochip_generic_free, .dbg_show = msm_gpio_dbg_show, }; @@ -813,6 +831,8 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl) struct gpio_chip *chip; int ret; unsigned ngpio = pctrl->soc->ngpios; + const struct msm_pingroup *groups = pctrl->soc->groups; + unsigned int i; if (WARN_ON(ngpio > MAX_NR_GPIO)) return -EINVAL; @@ -825,13 +845,29 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl) chip->owner = THIS_MODULE; chip->of_node = pctrl->dev->of_node; + /* If the GPIO map is sparse, then we need to disable specific IRQs */ + if (pctrl->soc->sparse) { + chip->irq_need_valid_mask = true; + chip->line_need_valid_mask = true; + } + ret = gpiochip_add_data(&pctrl->chip, pctrl); if (ret) { dev_err(pctrl->dev, "Failed register gpiochip\n"); return ret; } - ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio); + if (chip->line_need_valid_mask) { + for (i = 0; i < ngpio; i++) + if (!groups[i].npins) { + clear_bit(i, pctrl->chip.irq_valid_mask); + clear_bit(i, pctrl->chip.line_valid_mask); + } + } + + ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), + 0, 0, ngpio); + if (ret) { dev_err(pctrl->dev, "Failed to add pin range\n"); gpiochip_remove(&pctrl->chip); diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index 9b9feea540ff..70762bcb84cb 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -107,6 +107,7 @@ struct msm_pingroup { * @ngroups: The numbmer of entries in @groups. * @ngpio: The number of pingroups the driver should expose as GPIOs. * @pull_no_keeper: The SoC does not support keeper bias. + * @sparse: The GPIO map is sparse (some GPIOs have npins == 0) */ struct msm_pinctrl_soc_data { const struct pinctrl_pin_desc *pins; @@ -117,6 +118,7 @@ struct msm_pinctrl_soc_data { unsigned ngroups; unsigned ngpios; bool pull_no_keeper; + bool sparse; }; int msm_pinctrl_probe(struct platform_device *pdev,
pinctrl-msm only accepts an array of GPIOs from 0 to n-1, and it expects each group to support have only one pin (npins == 1). We can support "sparse" GPIO maps if we allow for some groups to have zero pins (npins == 0). These pins are "hidden" from the rest of the driver and gpiolib. A new boolean 'sparse' indicates whether the GPIO map is sparse. If any GPIO has an 'npins' value of 0, then 'sparse' must be set to True. Most access to unavailable GPIOs can be blocked via the gpio_chip.request function. The one exception is when gpiochip_add_data() scans all of the GPIOs without "requesting" them. To cover this case, msm_gpio_get_direction() separately checks if the GPIO is available. Signed-off-by: Timur Tabi <timur@codeaurora.org> --- drivers/pinctrl/qcom/pinctrl-msm.c | 48 +++++++++++++++++++++++++++++++++----- drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++ 2 files changed, 44 insertions(+), 6 deletions(-)