| Message ID | 1507783268-9022-1-git-send-email-pankaj.dubey@samsung.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | PCI: designware: move dw_pcie_iatu_unroll_enabled to pcie-designware.c | expand |
On Thu, Oct 12, 2017 at 10:11:08AM +0530, Pankaj Dubey wrote: > IATU unroll feature can be enabled in EP mode as well, so we need to > have this check in pcie-designware-ep.c, so instead of making this > function as static in pcie-desigware-host.c, let's move this in > pcie-designware.c so that both pcie-designware-host.c and > pcie-designware-ep.c can use it. > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> This is fine with me but I'm looking for an ack from Jingoo and/or Joao. > --- > drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ > drivers/pci/dwc/pcie-designware-host.c | 11 ----------- > drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ > drivers/pci/dwc/pcie-designware.h | 1 + > 4 files changed, 16 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c > index d53d5f1..64803a9 100644 > --- a/drivers/pci/dwc/pcie-designware-ep.c > +++ b/drivers/pci/dwc/pcie-designware-ep.c > @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > if (ep->ops->ep_init) > ep->ops->ep_init(ep); > > + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); > + dev_dbg(dev, "iATU unroll: %s\n", > + pci->iatu_unroll_enabled ? "enabled" : "disabled"); > + > epc = devm_pci_epc_create(dev, &epc_ops); > if (IS_ERR(epc)) { > dev_err(dev, "failed to create epc device\n"); > diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c > index 81e2157..d3f579e 100644 > --- a/drivers/pci/dwc/pcie-designware-host.c > +++ b/drivers/pci/dwc/pcie-designware-host.c > @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { > .write = dw_pcie_wr_conf, > }; > > -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > -{ > - u32 val; > - > - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > - if (val == 0xffffffff) > - return 1; > - > - return 0; > -} > - > void dw_pcie_setup_rc(struct pcie_port *pp) > { > u32 val; > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c > index 88abddd..f15da90 100644 > --- a/drivers/pci/dwc/pcie-designware.c > +++ b/drivers/pci/dwc/pcie-designware.c > @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, > dev_err(pci->dev, "write DBI address failed\n"); > } > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) I know this is just moved verbatim, but it's more conventional to simply return an int (or possibly bool) for a predicate like this. There's really no point in going out of your way to specify "u8" for the return type. > +{ > + u32 val; > + > + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > + if (val == 0xffffffff) > + return 1; > + > + return 0; > +} > + > static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) > { > u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h > index e5d9d77..8d6829c 100644 > --- a/drivers/pci/dwc/pcie-designware.h > +++ b/drivers/pci/dwc/pcie-designware.h > @@ -242,6 +242,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, > void dw_pcie_disable_atu(struct dw_pcie *pci, int index, > enum dw_pcie_region_type type); > void dw_pcie_setup(struct dw_pcie *pci); > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci); > > static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val) > { > -- > 2.7.4 >
On 20 October 2017 at 23:11, Bjorn Helgaas <helgaas@kernel.org> wrote: > > On Thu, Oct 12, 2017 at 10:11:08AM +0530, Pankaj Dubey wrote: > > IATU unroll feature can be enabled in EP mode as well, so we need to > > have this check in pcie-designware-ep.c, so instead of making this > > function as static in pcie-desigware-host.c, let's move this in > > pcie-designware.c so that both pcie-designware-host.c and > > pcie-designware-ep.c can use it. > > > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > This is fine with me but I'm looking for an ack from Jingoo and/or Joao. > Jingoo / Joao any comments on this? > > > --- > > drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ > > drivers/pci/dwc/pcie-designware-host.c | 11 ----------- > > drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ > > drivers/pci/dwc/pcie-designware.h | 1 + > > 4 files changed, 16 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c > > index d53d5f1..64803a9 100644 > > --- a/drivers/pci/dwc/pcie-designware-ep.c > > +++ b/drivers/pci/dwc/pcie-designware-ep.c > > @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > > if (ep->ops->ep_init) > > ep->ops->ep_init(ep); > > > > + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); > > + dev_dbg(dev, "iATU unroll: %s\n", > > + pci->iatu_unroll_enabled ? "enabled" : "disabled"); > > + > > epc = devm_pci_epc_create(dev, &epc_ops); > > if (IS_ERR(epc)) { > > dev_err(dev, "failed to create epc device\n"); > > diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c > > index 81e2157..d3f579e 100644 > > --- a/drivers/pci/dwc/pcie-designware-host.c > > +++ b/drivers/pci/dwc/pcie-designware-host.c > > @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { > > .write = dw_pcie_wr_conf, > > }; > > > > -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > -{ > > - u32 val; > > - > > - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > > - if (val == 0xffffffff) > > - return 1; > > - > > - return 0; > > -} > > - > > void dw_pcie_setup_rc(struct pcie_port *pp) > > { > > u32 val; > > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c > > index 88abddd..f15da90 100644 > > --- a/drivers/pci/dwc/pcie-designware.c > > +++ b/drivers/pci/dwc/pcie-designware.c > > @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, > > dev_err(pci->dev, "write DBI address failed\n"); > > } > > > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > I know this is just moved verbatim, but it's more conventional to simply > return an int (or possibly bool) for a predicate like this. There's really > no point in going out of your way to specify "u8" for the return type. > Ok, it can be done, will wait for comments from Jingoo and or Joao and then update. Thanks, Pankaj > > +{ > > + u32 val; > > + > > + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > > + if (val == 0xffffffff) > > + return 1; > > + > > + return 0; > > +} > > + > > static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) > > { > > u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); > > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h > > index e5d9d77..8d6829c 100644 > > --- a/drivers/pci/dwc/pcie-designware.h > > +++ b/drivers/pci/dwc/pcie-designware.h > > @@ -242,6 +242,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, > > void dw_pcie_disable_atu(struct dw_pcie *pci, int index, > > enum dw_pcie_region_type type); > > void dw_pcie_setup(struct dw_pcie *pci); > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci); > > > > static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val) > > { > > -- > > 2.7.4 > >
On Tue, Oct 24, 2017 at 07:10:55PM +0530, Pankaj Dubey wrote: > On 20 October 2017 at 23:11, Bjorn Helgaas <helgaas@kernel.org> wrote: > > > > On Thu, Oct 12, 2017 at 10:11:08AM +0530, Pankaj Dubey wrote: > > > IATU unroll feature can be enabled in EP mode as well, so we need to > > > have this check in pcie-designware-ep.c, so instead of making this > > > function as static in pcie-desigware-host.c, let's move this in > > > pcie-designware.c so that both pcie-designware-host.c and > > > pcie-designware-ep.c can use it. > > > > > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > > > This is fine with me but I'm looking for an ack from Jingoo and/or Joao. > > Jingoo / Joao any comments on this? Dropping for lack of ack. Please repost if/when we have an ack. > > > --- > > > drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ > > > drivers/pci/dwc/pcie-designware-host.c | 11 ----------- > > > drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ > > > drivers/pci/dwc/pcie-designware.h | 1 + > > > 4 files changed, 16 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c > > > index d53d5f1..64803a9 100644 > > > --- a/drivers/pci/dwc/pcie-designware-ep.c > > > +++ b/drivers/pci/dwc/pcie-designware-ep.c > > > @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > > > if (ep->ops->ep_init) > > > ep->ops->ep_init(ep); > > > > > > + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); > > > + dev_dbg(dev, "iATU unroll: %s\n", > > > + pci->iatu_unroll_enabled ? "enabled" : "disabled"); > > > + > > > epc = devm_pci_epc_create(dev, &epc_ops); > > > if (IS_ERR(epc)) { > > > dev_err(dev, "failed to create epc device\n"); > > > diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c > > > index 81e2157..d3f579e 100644 > > > --- a/drivers/pci/dwc/pcie-designware-host.c > > > +++ b/drivers/pci/dwc/pcie-designware-host.c > > > @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { > > > .write = dw_pcie_wr_conf, > > > }; > > > > > > -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > > -{ > > > - u32 val; > > > - > > > - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > > > - if (val == 0xffffffff) > > > - return 1; > > > - > > > - return 0; > > > -} > > > - > > > void dw_pcie_setup_rc(struct pcie_port *pp) > > > { > > > u32 val; > > > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c > > > index 88abddd..f15da90 100644 > > > --- a/drivers/pci/dwc/pcie-designware.c > > > +++ b/drivers/pci/dwc/pcie-designware.c > > > @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, > > > dev_err(pci->dev, "write DBI address failed\n"); > > > } > > > > > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > > > I know this is just moved verbatim, but it's more conventional to simply > > return an int (or possibly bool) for a predicate like this. There's really > > no point in going out of your way to specify "u8" for the return type. > > > > Ok, it can be done, will wait for comments from Jingoo and or Joao and > then update. > > Thanks, > Pankaj > > > > > +{ > > > + u32 val; > > > + > > > + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > > > + if (val == 0xffffffff) > > > + return 1; > > > + > > > + return 0; > > > +} > > > + > > > static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) > > > { > > > u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); > > > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h > > > index e5d9d77..8d6829c 100644 > > > --- a/drivers/pci/dwc/pcie-designware.h > > > +++ b/drivers/pci/dwc/pcie-designware.h > > > @@ -242,6 +242,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, > > > void dw_pcie_disable_atu(struct dw_pcie *pci, int index, > > > enum dw_pcie_region_type type); > > > void dw_pcie_setup(struct dw_pcie *pci); > > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci); > > > > > > static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val) > > > { > > > -- > > > 2.7.4 > > >
On Thursday, October 12, 2017 12:41 AM, Pankaj Dubey wrote: > > IATU unroll feature can be enabled in EP mode as well, so we need to > have this check in pcie-designware-ep.c, so instead of making this > function as static in pcie-desigware-host.c, let's move this in > pcie-designware.c so that both pcie-designware-host.c and > pcie-designware-ep.c can use it. > > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Sorry for my late response. Acked-by: Jingoo Han <jingoohan1@gmail.com> Best regards, Jingoo Han > --- > drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ > drivers/pci/dwc/pcie-designware-host.c | 11 ----------- > drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ > drivers/pci/dwc/pcie-designware.h | 1 + > 4 files changed, 16 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie- > designware-ep.c > index d53d5f1..64803a9 100644 > --- a/drivers/pci/dwc/pcie-designware-ep.c > +++ b/drivers/pci/dwc/pcie-designware-ep.c > @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > if (ep->ops->ep_init) > ep->ops->ep_init(ep); > > + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); > + dev_dbg(dev, "iATU unroll: %s\n", > + pci->iatu_unroll_enabled ? "enabled" : "disabled"); > + > epc = devm_pci_epc_create(dev, &epc_ops); > if (IS_ERR(epc)) { > dev_err(dev, "failed to create epc device\n"); > diff --git a/drivers/pci/dwc/pcie-designware-host.c > b/drivers/pci/dwc/pcie-designware-host.c > index 81e2157..d3f579e 100644 > --- a/drivers/pci/dwc/pcie-designware-host.c > +++ b/drivers/pci/dwc/pcie-designware-host.c > @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { > .write = dw_pcie_wr_conf, > }; > > -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > -{ > - u32 val; > - > - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > - if (val == 0xffffffff) > - return 1; > - > - return 0; > -} > - > void dw_pcie_setup_rc(struct pcie_port *pp) > { > u32 val; > diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie- > designware.c > index 88abddd..f15da90 100644 > --- a/drivers/pci/dwc/pcie-designware.c > +++ b/drivers/pci/dwc/pcie-designware.c > @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void > __iomem *base, u32 reg, > dev_err(pci->dev, "write DBI address failed\n"); > } > > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > +{ > + u32 val; > + > + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); > + if (val == 0xffffffff) > + return 1; > + > + return 0; > +} > + > static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 > reg) > { > u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie- > designware.h > index e5d9d77..8d6829c 100644 > --- a/drivers/pci/dwc/pcie-designware.h > +++ b/drivers/pci/dwc/pcie-designware.h > @@ -242,6 +242,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int > index, int bar, > void dw_pcie_disable_atu(struct dw_pcie *pci, int index, > enum dw_pcie_region_type type); > void dw_pcie_setup(struct dw_pcie *pci); > +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci); > > static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 > val) > { > -- > 2.7.4
Hi Jingoo, On 12/21/2017 10:04 PM, Jingoo Han wrote: > On Thursday, October 12, 2017 12:41 AM, Pankaj Dubey wrote: >> IATU unroll feature can be enabled in EP mode as well, so we need to >> have this check in pcie-designware-ep.c, so instead of making this >> function as static in pcie-desigware-host.c, let's move this in >> pcie-designware.c so that both pcie-designware-host.c and >> pcie-designware-ep.c can use it. >> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Sorry for my late response. > > Acked-by: Jingoo Han <jingoohan1@gmail.com> > > Best regards, > Jingoo Han Thanks for review and Ack. Will resubmit this along with your Ack. Thanks, Pankaj Dubey
Hi Pankaj, On Friday 20 October 2017 11:11 PM, Bjorn Helgaas wrote: > On Thu, Oct 12, 2017 at 10:11:08AM +0530, Pankaj Dubey wrote: >> IATU unroll feature can be enabled in EP mode as well, so we need to >> have this check in pcie-designware-ep.c, so instead of making this >> function as static in pcie-desigware-host.c, let's move this in >> pcie-designware.c so that both pcie-designware-host.c and >> pcie-designware-ep.c can use it. >> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > This is fine with me but I'm looking for an ack from Jingoo and/or Joao. Since you are planning to send a new version, I have one comment below.. > >> --- >> drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ >> drivers/pci/dwc/pcie-designware-host.c | 11 ----------- >> drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ >> drivers/pci/dwc/pcie-designware.h | 1 + >> 4 files changed, 16 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c >> index d53d5f1..64803a9 100644 >> --- a/drivers/pci/dwc/pcie-designware-ep.c >> +++ b/drivers/pci/dwc/pcie-designware-ep.c >> @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) >> if (ep->ops->ep_init) >> ep->ops->ep_init(ep); >> >> + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); >> + dev_dbg(dev, "iATU unroll: %s\n", >> + pci->iatu_unroll_enabled ? "enabled" : "disabled"); >> + IMO this should be moved to dw_pcie_setup() in drivers/pci/dwc/pcie-designware.c which is common to both RC and EP. >> epc = devm_pci_epc_create(dev, &epc_ops); >> if (IS_ERR(epc)) { >> dev_err(dev, "failed to create epc device\n"); >> diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c >> index 81e2157..d3f579e 100644 >> --- a/drivers/pci/dwc/pcie-designware-host.c >> +++ b/drivers/pci/dwc/pcie-designware-host.c >> @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { >> .write = dw_pcie_wr_conf, >> }; >> >> -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) >> -{ >> - u32 val; >> - >> - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); >> - if (val == 0xffffffff) >> - return 1; >> - >> - return 0; >> -} >> - >> void dw_pcie_setup_rc(struct pcie_port *pp) >> { >> u32 val; >> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c >> index 88abddd..f15da90 100644 >> --- a/drivers/pci/dwc/pcie-designware.c >> +++ b/drivers/pci/dwc/pcie-designware.c >> @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, >> dev_err(pci->dev, "write DBI address failed\n"); >> } >> >> +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > I know this is just moved verbatim, but it's more conventional to simply > return an int (or possibly bool) for a predicate like this. There's really > no point in going out of your way to specify "u8" for the return type. > >> +{ >> + u32 val; >> + >> + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); >> + if (val == 0xffffffff) >> + return 1; Not directly related to this patch but IMO iatu_unroll should be enabled for all designware core version 4.80?? IMO comparing value in ATU_VIEWPORT to 0xffffffff is not a good indication of whether the platform support iatu unroll or not. If this is specific to 4.80, then glue drivers should just pass the designware core version and if it is 4.80, then iatu unroll should be enabled? Thanks Kishon
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c index d53d5f1..64803a9 100644 --- a/drivers/pci/dwc/pcie-designware-ep.c +++ b/drivers/pci/dwc/pcie-designware-ep.c @@ -314,6 +314,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) if (ep->ops->ep_init) ep->ops->ep_init(ep); + pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci); + dev_dbg(dev, "iATU unroll: %s\n", + pci->iatu_unroll_enabled ? "enabled" : "disabled"); + epc = devm_pci_epc_create(dev, &epc_ops); if (IS_ERR(epc)) { dev_err(dev, "failed to create epc device\n"); diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c index 81e2157..d3f579e 100644 --- a/drivers/pci/dwc/pcie-designware-host.c +++ b/drivers/pci/dwc/pcie-designware-host.c @@ -574,17 +574,6 @@ static struct pci_ops dw_pcie_ops = { .write = dw_pcie_wr_conf, }; -static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) -{ - u32 val; - - val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); - if (val == 0xffffffff) - return 1; - - return 0; -} - void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c index 88abddd..f15da90 100644 --- a/drivers/pci/dwc/pcie-designware.c +++ b/drivers/pci/dwc/pcie-designware.c @@ -92,6 +92,17 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, dev_err(pci->dev, "write DBI address failed\n"); } +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) +{ + u32 val; + + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); + if (val == 0xffffffff) + return 1; + + return 0; +} + static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) { u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h index e5d9d77..8d6829c 100644 --- a/drivers/pci/dwc/pcie-designware.h +++ b/drivers/pci/dwc/pcie-designware.h @@ -242,6 +242,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, void dw_pcie_disable_atu(struct dw_pcie *pci, int index, enum dw_pcie_region_type type); void dw_pcie_setup(struct dw_pcie *pci); +u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci); static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val) {
IATU unroll feature can be enabled in EP mode as well, so we need to have this check in pcie-designware-ep.c, so instead of making this function as static in pcie-desigware-host.c, let's move this in pcie-designware.c so that both pcie-designware-host.c and pcie-designware-ep.c can use it. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> --- drivers/pci/dwc/pcie-designware-ep.c | 4 ++++ drivers/pci/dwc/pcie-designware-host.c | 11 ----------- drivers/pci/dwc/pcie-designware.c | 11 +++++++++++ drivers/pci/dwc/pcie-designware.h | 1 + 4 files changed, 16 insertions(+), 11 deletions(-)