| Message ID | 20170911122952.33980-2-hverkuil@xs4all.nl |
|---|---|
| State | Deferred |
| Headers | show |
| Series | [PATCHv4,1/4] dt-bindings: document the tegra CEC bindings | expand |
On Mon, Sep 11, 2017 at 02:29:49PM +0200, Hans Verkuil wrote: > From: Hans Verkuil <hans.verkuil@cisco.com> > > This documents the binding for the Tegra CEC module. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/media/tegra-cec.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt > > diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt > new file mode 100644 > index 000000000000..c503f06f3b84 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt > @@ -0,0 +1,27 @@ > +* Tegra HDMI CEC hardware > + > +The HDMI CEC module is present in Tegra SoCs and its purpose is to > +handle communication between HDMI connected devices over the CEC bus. > + > +Required properties: > + - compatible : value should be one of the following: > + "nvidia,tegra114-cec" > + "nvidia,tegra124-cec" > + "nvidia,tegra210-cec" > + - reg : Physical base address of the IP registers and length of memory > + mapped region. > + - interrupts : HDMI CEC interrupt number to the CPU. > + - clocks : from common clock binding: handle to HDMI CEC clock. > + - clock-names : from common clock binding: must contain "cec", > + corresponding to the entry in the clocks property. > + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. I don't understand the need for the -phandle suffix. I would've probably just gone with "hdmi", or "hdmi-controller". But I see that this is already pretty standardized, so... Acked-by: Thierry Reding <treding@nvidia.com>
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 000000000000..c503f06f3b84 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,27 @@ +* Tegra HDMI CEC hardware + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to the entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; +};