| Message ID | 1291469358-25023-5-git-send-email-luigi.mantellini@idf-hit.com |
|---|---|
| State | Changes Requested |
| Headers | show |
Dear Luigi 'Comio' Mantellini, In message <1291469358-25023-5-git-send-email-luigi.mantellini@idf-hit.com> you wrote: > See README file for details regarding ho bootstrap code works. Please provide at least a basic explanation of that this commit is doing in the commitm essage. Not only the commit message, also the remaining text is full of typos. Please run through a spell checker. > Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> > --- > .gitignore | 25 ++++++- > Makefile | 174 +++++++++++++++++++++++++++++++++++++++++++- Please consider if this can be handled separately, without adding tons of new code to the top level Makefile. > diff --git a/.gitignore b/.gitignore > index e71f6ac..8db8f0f 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -23,6 +23,12 @@ > /u-boot.hex > /u-boot.map > /u-boot.bin > +/u-boot.bin.bz2 > +/u-boot.bin.gz > +/u-boot.bin.lzma > +/u-boot.bin.lzo > +/u-boot.bin.xz > +/u-boot.dis > /u-boot.srec > /u-boot.ldr > /u-boot.ldr.hex > @@ -30,6 +36,20 @@ > /u-boot.lds > /u-boot-onenand.bin > /u-boot-flexonenand.bin > +/u-boot-bootstrap > +/u-boot-bootstrap.hex > +/u-boot-bootstrap.map > +/u-boot-bootstrap.bin > +/u-boot-bootstrap.bin.bz2 > +/u-boot-bootstrap.bin.gz > +/u-boot-bootstrap.bin.lzma > +/u-boot-bootstrap.bin.lzo > +/u-boot-bootstrap.dis > +/u-boot-bootstrap.srec > +/u-boot-bootstrap.ldr > +/u-boot-bootstrap.ldr.hex > +/u-boot-bootstrap.ldr.srec > +/u-boot-bootstrap.lds Please explain why all these new images are needed? > @@ -39,7 +59,7 @@ > /LOG > /errlog > /reloc_off > - > +/.payload.s ??? > /onenand_ipl/onenand-ipl* > /onenand_ipl/board/*/onenand* > /onenand_ipl/board/*/*.S > +examples/standalone/ > + > +setvars ??? > +ifeq ($(CONFIG_BOOTSTRAP),y) > +BOOTSTRAP_OBJS = $(CPUDIR)/start_bootstrap.o > + > +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_OBJS)) > +endif > + > + > LIBS = lib/libgeneric.o > LIBS += lib/lzma/liblzma.o > LIBS += lib/lzo/liblzo.o > @@ -270,6 +277,24 @@ LIBS := $(addprefix $(obj),$(sort $(LIBS))) > LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o > LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) > > +ifeq ($(CONFIG_BOOTSTRAP),y) > +BOOTSTRAP_LIBS = lib/libgeneric_bootstrap.o > +BOOTSTRAP_LIBS += arch/$(ARCH)/cpu/lib$(ARCH)_bootstrap.o > +BOOTSTRAP_LIBS += arch/$(ARCH)/lib/lib$(ARCH)_bootstrap.o > +BOOTSTRAP_LIBS += common/libcommon_bootstrap.o > +BOOTSTRAP_LIBS += drivers/serial/libserial.o > + > +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_LZMA) += lib/lzma/liblzma.o > +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_LZO) += lib/lzo/liblzo.o > +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_XZ) += lib/xz/libxz.o > +BOOTSTRAP_LIBS += $(BOOTSTRAP_LIBS-y) > + > +.PHONY : $(BOOTSTRAP_LIBS) > + > +BOOTSTRAP_LIBBOARD = board/$(BOARDDIR)/lib$(BOARD)_bootstrap.o > +BOOTSTRAP_LIBBOARD := $(addprefix $(obj),$(BOOTSTRAP_LIBBOARD)) > +endif Can this not go to a separate, new directory? > +__BOOTSTRAP_LIBS := $(subst $(obj),,$(BOOTSTRAP_LIBS)) $(subst $(obj),,$(BOOTSTRAP_LIBBOARD)) Lines too long... Please fix globally. > +$(obj)u-boot.bin.gz: $(obj)u-boot.bin > + gzip -c $< > $@ > + > +$(obj)u-boot.bin.lzma: $(obj)u-boot.bin > + lzma -e -z -c $< > $@ > + > +$(obj)u-boot.bin.xz: $(obj)u-boot.bin > + tools/xz_wrap.sh misc < $< > $@ > + > +$(obj)u-boot.bin.lzo: $(obj)u-boot.bin > + lzop -9 -c $< > $@ > + > +$(obj)u-boot.bin.bz2: $(obj)u-boot.bin > + bzip2 --best -z -c $< > $@ > + Do we need this in the top level Makefile? > @@ -373,7 +423,7 @@ $(obj)u-boot.dis: $(obj)u-boot > GEN_UBOOT = \ > UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ > sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ > - cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ > + cd $(LNDIR) && $(LD) --gc-sections $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ > --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ > -Map u-boot.map -o u-boot Be careful!! This will break toins of boards as you did not adapt the linker scripts! > +# Bootstrap targets > + > +ifeq ($(CONFIG_BOOTSTRAP),y) > +$(obj)u-boot-bootstrap.hex: $(obj)u-boot-bootstrap > + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ > + > +$(obj)u-boot-bootstrap.srec: $(obj)u-boot-bootstrap > + $(OBJCOPY) -O srec $< $@ > + > +$(obj)u-boot-bootstrap.bin: $(obj)u-boot-bootstrap > + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ > + $(BOARD_SIZE_CHECK) > + > +$(obj)u-boot-bootstrap.bin.gz: $(obj)u-boot-bootstrap.bin > + gzip -c $< > $@ > + > +$(obj)u-boot-bootstrap.bin.lzma: $(obj)u-boot-bootstrap.bin > + lzma -e -z -c $< > $@ > + > +$(obj)u-boot.bin-bootstrap.lzo: $(obj)u-boot-bootstrap.bin > + lzop -9 -c $< > $@ > + > +$(obj)u-boot.bin-bootstrap.bz2: $(obj)u-boot-bootstrap.bin > + bzip2 --best -z -c $< > $@ > + > +$(obj)u-boot-bootstrap.ldr: $(obj)u-boot-bootstrap > + $(CREATE_LDR_ENV) > + $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) > + $(BOARD_SIZE_CHECK) > + > +$(obj)u-boot-bootstrap.ldr.hex: $(obj)u-boot-bootstrap.ldr > + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary > + > +$(obj)u-boot-bootstrap.ldr.srec: $(obj)u-boot-bootstrap.ldr > + $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary > + > +$(obj)u-boot-bootstrap.img: $(obj)u-boot-bootstrap.bin > + $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ > + -a $(CONFIG_BOOTSTRAP_BASE) -e 0 \ > + -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ > + sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ > + -d $< $@ > + > +$(obj)u-boot-bootstrap.imx: $(obj)u-boot-bootstrap.bin > + $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ > + -e $(CONFIG_BOOTSTRAP_BASE) -d $< $@ > + > +$(obj)u-boot-bootstrap.kwb: $(obj)u-boot-bootstrap.bin > + $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ > + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ > + > +$(obj)u-boot-bootstrap.sha1: $(obj)u-boot-bootstrap.bin > + $(obj)tools/ubsha1 $(obj)u-boot-bootstrap.bin > + > +$(obj)u-boot-bootstrap.dis: $(obj)u-boot-bootstrap > + $(OBJDUMP) -d $< > $@ > + > +PAYLOAD_FILE_BASE=$(obj)u-boot.bin > +ifeq ($(CONFIG_BOOTSTRAP_GZIP),y) > +PAYLOAD_FILE_EXT:=.gz > +endif > +ifeq ($(CONFIG_BOOTSTRAP_LZMA),y) > +PAYLOAD_FILE_EXT:=.lzma > +endif > +ifeq ($(CONFIG_BOOTSTRAP_LZO),y) > +PAYLOAD_FILE_EXT:=.lzo > +endif > +ifeq ($(CONFIG_BOOTSTRAP_BZIP2),y) > +PAYLOAD_FILE_EXT:=.bz2 > +endif > +ifeq ($(CONFIG_BOOTSTRAP_XZ),y) > +PAYLOAD_FILE_EXT:=.xz > +endif > + > +PAYLOAD_FILE := $(PAYLOAD_FILE_BASE)$(PAYLOAD_FILE_EXT) > + > +$(obj).payload.s: $(PAYLOAD_FILE) > + echo ".globl payload_start" > $@ > + echo ".globl payload_end" >> $@ > + echo ".globl payload_size" >> $@ > + echo ".globl payload_uncsize" >> $@ > + echo .section .payload,\"a\",@progbits >> $@ > + echo "payload_size:" >> $@ > + echo -n ".word " >> $@ > + wc -c $(PAYLOAD_FILE) | cut -f1 -d' ' >> $@ > + echo "payload_uncsize:" >> $@ > + echo -n ".word " >> $@ > + wc -c $(obj)u-boot.bin | cut -f1 -d' ' >> $@ > + echo "payload_start:" >> $@ > + echo .incbin \"$(PAYLOAD_FILE)\" >> $@ > + echo "payload_end:" >> $@ > + > +GEN_UBOOT_BOOTSTRAP = \ > + UNDEF_SYM=`$(OBJDUMP) -x $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) | \ > + sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ > + cd $(LNDIR) && $(LD) --gc-sections $(BOOTSTRAP_LDFLAGS) $$UNDEF_SYM $(obj).payload.o $(__BOOTSTRAP_OBJS) \ > + --start-group $(__BOOTSTRAP_LIBS) --end-group $(BOOTSTRAP_PLATFORM_LIBS) \ > + -Map u-boot-bootstrap.map -o u-boot-bootstrap > +$(obj)u-boot-bootstrap: depend $(SUBDIRS) $(BOOTSTRAP_OBJS) $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) $(BOOTSTRAP_LDSCRIPT) $(obj)u-boot-bootstrap.lds $(obj).payload.o > + $(GEN_UBOOT_BOOTSTRAP) > +ifeq ($(CONFIG_KALLSYMS),y) > + smap=`$(call SYSTEM_MAP,u-boot-bootstrap) | \ > + awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ > + $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ > + -c common/system_map.c -o $(obj)common/system_map.o > + $(GEN_UBOOT_BOOTSTRAP) $(obj)common/system_map.o > +endif > + > +$(BOOTSTRAP_LIBBOARD): depend $(BOOTSTRAP_LIBS) > + $(MAKE) -C $(dir $(subst $(obj),,$@)) $(notdir $@) > +endif NAK!! Please find a way to implement this without adding all that code to the top level Makefile. > +- Compressed U-Boot support: > + CONFIG_BOOTSTRAP_BASE > + > + This option enables the Boostrap infrastructure. > + The bootstrap code consists of a small binary that is able > + to decompress an attached payload (a full U-Boot image), > + allowing to have a small but also full featured U-Boot > + bootloader. That means you have to make adjustments to the init code of all architectures / boards. I do not see this in this patch, nor are there any preceeding patches that prepare the ground. In other words, this will not work at best, or more likely break zillions of boards. On which architectures / boards has this been tested? > + BOOTSTRAP_LDSCRIPT > + > + LD script for bootstrap code. If not defined, a board specific script will be > + used. This is the wrong way around. Only if a board specific script is needed there should be need for such a definition; in all other cases a default script should be used. > +ifneq ($(CONFIG_BOOTSTRAP_TEXT_BASE),) > +CPPFLAGS += -DCONFIG_BOOTSTRAP_TEXT_BASE=$(CONFIG_BOOTSTRAP_TEXT_BASE) > +endif This should never be necessary. > +#ifdef CONFIG_BOOTSTRAP_BZIP2 > +#define _CONFIG_BOOTSTRAP_RELOCATE > +#define _CONFIG_BOOTSTRAP_MALLOC > +// #define _CONFIG_BOOTSTRAP_FAKEMALLOC > +#endif C++ comments are not allowed. Please fix globally. > +static const char *algo = > +#if defined(CONFIG_BOOTSTRAP_GZIP) > + "gzip"; > +#elif defined(CONFIG_BOOTSTRAP_LZMA) > + "lzma"; > +#elif defined(CONFIG_BOOTSTRAP_LZO) > + "lzo"; > +#elif defined(CONFIG_BOOTSTRAP_BZIP2) > + "bzip2"; > +#elif defined(CONFIG_BOOTSTRAP_XZ) > + "xz"; > +#else > + "flat"; > +#endif Previous descriptions sounded as if all these formats were supported in parallel. Not it seems only one is at a time, and there is a search order. This must at least be documented. It would be better if an error was raised if two options are selected. > + printf("Uncompressing payload (%s)...", algo); > +#if defined(CONFIG_BOOTSTRAP_GZIP) > + ret = gunzip(dst, unc_size, src, &size); > +#elif defined(CONFIG_BOOTSTRAP_LZMA) > + SizeT outsize = unc_size; What's "SizeT" ?? We don;t allow such names in U-Boot. > + if (ret) { > + printf("failed with error %d.\n", ret); > + bootstrap_hang(); > + } else { > + puts("done.\n"); > + } > + return ret; Indentation by TAB, please! > \ No newline at end of file And fix this, too. > diff --git a/tools/xz_wrap.sh b/tools/xz_wrap.sh > new file mode 100755 > index 0000000..dbe5e55 > --- /dev/null > +++ b/tools/xz_wrap.sh > @@ -0,0 +1,45 @@ > +#!/bin/sh > +# > +# This is a wrapper for xz to use appropriate compression options depending > +# on what is being compressed. The only argument to this script should be > +# "kernel" or "misc" to indicate what is being compressed. What do we use? > +# Author: Lasse Collin <lasse.collin@tukaani.org> > +# > +# This file has been put into the public domain. > +# You can do whatever you want with this file. > +# > + > +# Defaults: No BCJ filter and no extra LZMA2 options. > +BCJ= > +LZMA2OPTS= > + > +# Big dictionary is OK for the kernel image, but it's not OK > +# for other things. > +# > +# BCJ filter is used only for the kernel, at least for now. > +# It could be useful for non-trivial initramfs too, but it > +# depends on the exact content of the initramfs image. > +case $1 in > + kernel) > + DICT=16MiB > + case $ARCH in > + x86|x86_64) BCJ=--x86 ;; > + powerpc) BCJ=--powerpc ;; > + ia64) BCJ=--ia64; LZMA2OPTS=pb=4 ;; > + arm) BCJ=--arm ;; > + sparc) BCJ=--sparc ;; > + esac Error handling for other architectures? Best regards, Wolfgang Denk
Hi Wolfgang and ML, On Sat, Dec 4, 2010 at 11:47 PM, Wolfgang Denk <wd@denx.de> wrote: > Dear Luigi 'Comio' Mantellini, > > Not only the commit message, also the remaining text is full of > typos. Please run through a spell checker. you are right. I will check better my english. sorry! > >> Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> >> --- >> .gitignore | 25 ++++++- >> Makefile | 174 +++++++++++++++++++++++++++++++++++++++++++- > > Please consider if this can be handled separately, without adding tons > of new code to the top level Makefile. > >> diff --git a/.gitignore b/.gitignore >> index e71f6ac..8db8f0f 100644 >> --- a/.gitignore >> +++ b/.gitignore >> @@ -23,6 +23,12 @@ >> /u-boot.hex >> /u-boot.map >> /u-boot.bin >> +/u-boot.bin.bz2 >> +/u-boot.bin.gz >> +/u-boot.bin.lzma >> +/u-boot.bin.lzo ... > > Please explain why all these new images are needed? The u-boot.bin.* images will used as payload. u-boot-bootstrap.bin.* can be dropped. can A rule u-boot.bin.* be considered safe? > >> @@ -39,7 +59,7 @@ >> /LOG >> /errlog >> /reloc_off >> - >> +/.payload.s > .payload.s is an assembler file generated at compile time to include the payload file (using .incbin directive). > ??? > >> +examples/standalone/ >> + >> +setvars > > ??? Sorry... these are wrongs. I will remove. > >> +ifeq ($(CONFIG_BOOTSTRAP),y) ... >> +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_LZO) += lib/lzo/liblzo.o >> +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_XZ) += lib/xz/libxz.o >> +BOOTSTRAP_LIBS += $(BOOTSTRAP_LIBS-y) >> + >> +.PHONY : $(BOOTSTRAP_LIBS) >> + >> +BOOTSTRAP_LIBBOARD = board/$(BOARDDIR)/lib$(BOARD)_bootstrap.o >> +BOOTSTRAP_LIBBOARD := $(addprefix $(obj),$(BOOTSTRAP_LIBBOARD)) >> +endif > > Can this not go to a separate, new directory? I would like to re-factorize again the patch(es) (if you consider this feature useful...) and I would like to better understand a possible directory structure. To cerate bootstrap, I need some (1) bootstrap specific files, some (2) non specific bootstrap files (like decompression libraries) and some (3) cut-down files (that in this patch have name like *_bootstrap.c). Which is your suggestion to organize these files? Regarding the (1) bootstrap specific files, like main makefile, the bootstrap.c file, I will move into a single directory. I have 2 choices: /bootsrap in the rootdir or /lib/bootstrap... I prefer the second choice. Furthermore I noticed that nand_spl and onenand_ipl code are placed into the rootdir. Regarding the (2) non specific code, following the nand_spl and onenand_ipl examples, I should create sym links to the real code sources. Honestly, I don't like this approach but if you thinks that is a good way, I will follow. I will create a ghost u-boot tree into the bootstrap directory with little-bit different makefiles, in order to check CONFIG_BOOTSTRAP_* symbols. Regarding the (3) cut-down fles (for example strat_bootstrap.S), I will avoid to use directly the u-boot original files, because the code is similar but not equal and I will introduce a lot of ifdef/endif to adapt the behaviour. In this case, also following the nand_spl and onenand_ipl examples, I will create a ghost tree in the /bootstrap directory for each cpu (even if I will send work for only mips) The last question is regarding the boards that should add some bootstrap specific code... where should this code be placed? into the board/BOARD/ directory or into a directory like /bootstrap/board/BOARD/? Sorry for these stupid questions, but I would avoid to iterate a lot of time on this work... and of course I will spend time only if this can be considered useful by community (this code is from my job and my boss asked by already to do other activities...). > >> +__BOOTSTRAP_LIBS := $(subst $(obj),,$(BOOTSTRAP_LIBS)) $(subst $(obj),,$(BOOTSTRAP_LIBBOARD)) > > Lines too long... Please fix globally. > >> +$(obj)u-boot.bin.gz: $(obj)u-boot.bin >> + gzip -c $< > $@ >> + ... >> + >> +$(obj)u-boot.bin.bz2: $(obj)u-boot.bin >> + bzip2 --best -z -c $< > $@ >> + > > Do we need this in the top level Makefile? Create compressed files can be useful. I can move into a different makefile or create suffix rules like %.bin.bz2: %.bin bzip2 --best -z -c $< > $@ > >> @@ -373,7 +423,7 @@ $(obj)u-boot.dis: $(obj)u-boot >> GEN_UBOOT = \ .. >> - cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ >> + cd $(LNDIR) && $(LD) --gc-sections $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ .. > > Be careful!! This will break toins of boards as you did not adapt the > linker scripts! Fixed. it was from previous experiments. I removed this from my sources. > >> +# Bootstrap targets >> + >> +ifeq ($(CONFIG_BOOTSTRAP),y) >> +$(obj)u-boot-bootstrap.hex: $(obj)u-boot-bootstrap >> + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ >> + >> +$(obj)u-boot-bootstrap.srec: $(obj)u-boot-bootstrap >> + $(OBJCOPY) -O srec $< $@ >> + >> +$(obj)u-boot-bootstrap.bin: $(obj)u-boot-bootstrap >> + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ >> + $(BOARD_SIZE_CHECK) >> + >> +$(obj)u-boot-bootstrap.bin.gz: $(obj)u-boot-bootstrap.bin >> + gzip -c $< > $@ >> + >> +$(obj)u-boot-bootstrap.bin.lzma: $(obj)u-boot-bootstrap.bin >> + lzma -e -z -c $< > $@ >> + >> +$(obj)u-boot.bin-bootstrap.lzo: $(obj)u-boot-bootstrap.bin >> + lzop -9 -c $< > $@ >> + >> +$(obj)u-boot.bin-bootstrap.bz2: $(obj)u-boot-bootstrap.bin >> + bzip2 --best -z -c $< > $@ >> + >> +$(obj)u-boot-bootstrap.ldr: $(obj)u-boot-bootstrap >> + $(CREATE_LDR_ENV) >> + $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) >> + $(BOARD_SIZE_CHECK) >> + >> +$(obj)u-boot-bootstrap.ldr.hex: $(obj)u-boot-bootstrap.ldr >> + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary >> + >> +$(obj)u-boot-bootstrap.ldr.srec: $(obj)u-boot-bootstrap.ldr >> + $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary >> + >> +$(obj)u-boot-bootstrap.img: $(obj)u-boot-bootstrap.bin >> + $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ >> + -a $(CONFIG_BOOTSTRAP_BASE) -e 0 \ >> + -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ >> + sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ >> + -d $< $@ >> + >> +$(obj)u-boot-bootstrap.imx: $(obj)u-boot-bootstrap.bin >> + $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ >> + -e $(CONFIG_BOOTSTRAP_BASE) -d $< $@ >> + >> +$(obj)u-boot-bootstrap.kwb: $(obj)u-boot-bootstrap.bin >> + $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ >> + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ >> + >> +$(obj)u-boot-bootstrap.sha1: $(obj)u-boot-bootstrap.bin >> + $(obj)tools/ubsha1 $(obj)u-boot-bootstrap.bin >> + >> +$(obj)u-boot-bootstrap.dis: $(obj)u-boot-bootstrap >> + $(OBJDUMP) -d $< > $@ >> + >> +PAYLOAD_FILE_BASE=$(obj)u-boot.bin >> +ifeq ($(CONFIG_BOOTSTRAP_GZIP),y) >> +PAYLOAD_FILE_EXT:=.gz >> +endif >> +ifeq ($(CONFIG_BOOTSTRAP_LZMA),y) >> +PAYLOAD_FILE_EXT:=.lzma >> +endif >> +ifeq ($(CONFIG_BOOTSTRAP_LZO),y) >> +PAYLOAD_FILE_EXT:=.lzo >> +endif >> +ifeq ($(CONFIG_BOOTSTRAP_BZIP2),y) >> +PAYLOAD_FILE_EXT:=.bz2 >> +endif >> +ifeq ($(CONFIG_BOOTSTRAP_XZ),y) >> +PAYLOAD_FILE_EXT:=.xz >> +endif >> + >> +PAYLOAD_FILE := $(PAYLOAD_FILE_BASE)$(PAYLOAD_FILE_EXT) >> + >> +$(obj).payload.s: $(PAYLOAD_FILE) >> + echo ".globl payload_start" > $@ >> + echo ".globl payload_end" >> $@ >> + echo ".globl payload_size" >> $@ >> + echo ".globl payload_uncsize" >> $@ >> + echo .section .payload,\"a\",@progbits >> $@ >> + echo "payload_size:" >> $@ >> + echo -n ".word " >> $@ >> + wc -c $(PAYLOAD_FILE) | cut -f1 -d' ' >> $@ >> + echo "payload_uncsize:" >> $@ >> + echo -n ".word " >> $@ >> + wc -c $(obj)u-boot.bin | cut -f1 -d' ' >> $@ >> + echo "payload_start:" >> $@ >> + echo .incbin \"$(PAYLOAD_FILE)\" >> $@ >> + echo "payload_end:" >> $@ >> + >> +GEN_UBOOT_BOOTSTRAP = \ >> + UNDEF_SYM=`$(OBJDUMP) -x $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) | \ >> + sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ >> + cd $(LNDIR) && $(LD) --gc-sections $(BOOTSTRAP_LDFLAGS) $$UNDEF_SYM $(obj).payload.o $(__BOOTSTRAP_OBJS) \ >> + --start-group $(__BOOTSTRAP_LIBS) --end-group $(BOOTSTRAP_PLATFORM_LIBS) \ >> + -Map u-boot-bootstrap.map -o u-boot-bootstrap >> +$(obj)u-boot-bootstrap: depend $(SUBDIRS) $(BOOTSTRAP_OBJS) $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) $(BOOTSTRAP_LDSCRIPT) $(obj)u-boot-bootstrap.lds $(obj).payload.o >> + $(GEN_UBOOT_BOOTSTRAP) >> +ifeq ($(CONFIG_KALLSYMS),y) >> + smap=`$(call SYSTEM_MAP,u-boot-bootstrap) | \ >> + awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ >> + $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ >> + -c common/system_map.c -o $(obj)common/system_map.o >> + $(GEN_UBOOT_BOOTSTRAP) $(obj)common/system_map.o >> +endif >> + >> +$(BOOTSTRAP_LIBBOARD): depend $(BOOTSTRAP_LIBS) >> + $(MAKE) -C $(dir $(subst $(obj),,$@)) $(notdir $@) >> +endif > > > NAK!! Please find a way to implement this without adding all that > code to the top level Makefile. ok > >> +- Compressed U-Boot support: >> + CONFIG_BOOTSTRAP_BASE >> + >> + This option enables the Boostrap infrastructure. >> + The bootstrap code consists of a small binary that is able >> + to decompress an attached payload (a full U-Boot image), >> + allowing to have a small but also full featured U-Boot >> + bootloader. > > That means you have to make adjustments to the init code of all > architectures / boards. I do not see this in this patch, nor are > there any preceeding patches that prepare the ground. In other words, > this will not work at best, or more likely break zillions of boards. I can propose code only for mips (that is the platform that use every day). > > > On which architectures / boards has this been tested? > >> + BOOTSTRAP_LDSCRIPT >> + >> + LD script for bootstrap code. If not defined, a board specific script will be >> + used. > > This is the wrong way around. Only if a board specific script is > needed there should be need for such a definition; in all other cases > a default script should be used. > >> +ifneq ($(CONFIG_BOOTSTRAP_TEXT_BASE),) >> +CPPFLAGS += -DCONFIG_BOOTSTRAP_TEXT_BASE=$(CONFIG_BOOTSTRAP_TEXT_BASE) >> +endif > > This should never be necessary. I added for symmetry respect SYS_TEXT_BASE. > > >> +#ifdef CONFIG_BOOTSTRAP_BZIP2 >> +#define _CONFIG_BOOTSTRAP_RELOCATE >> +#define _CONFIG_BOOTSTRAP_MALLOC >> +// #define _CONFIG_BOOTSTRAP_FAKEMALLOC >> +#endif > > C++ comments are not allowed. Please fix globally. > C99 :) ok >> +static const char *algo = >> +#if defined(CONFIG_BOOTSTRAP_GZIP) >> + "gzip"; >> +#elif defined(CONFIG_BOOTSTRAP_LZMA) >> + "lzma"; >> +#elif defined(CONFIG_BOOTSTRAP_LZO) >> + "lzo"; >> +#elif defined(CONFIG_BOOTSTRAP_BZIP2) >> + "bzip2"; >> +#elif defined(CONFIG_BOOTSTRAP_XZ) >> + "xz"; >> +#else >> + "flat"; >> +#endif > > Previous descriptions sounded as if all these formats were supported > in parallel. Not it seems only one is at a time, and there is a search > order. This must at least be documented. It would be better if an > error was raised if two options are selected. The bootstrap supports just the algo used by the linked payload. I will add a coherency code to avoid multiple algo definitions > > >> + printf("Uncompressing payload (%s)...", algo); >> +#if defined(CONFIG_BOOTSTRAP_GZIP) >> + ret = gunzip(dst, unc_size, src, &size); >> +#elif defined(CONFIG_BOOTSTRAP_LZMA) >> + SizeT outsize = unc_size; > > What's "SizeT" ?? We don;t allow such names in U-Boot. > ok SizeT is used by lzma library >> + if (ret) { >> + printf("failed with error %d.\n", ret); >> + bootstrap_hang(); >> + } else { >> + puts("done.\n"); >> + } >> + return ret; > > Indentation by TAB, please! > >> \ No newline at end of file > > And fix this, too. ok > >> diff --git a/tools/xz_wrap.sh b/tools/xz_wrap.sh >> new file mode 100755 >> index 0000000..dbe5e55 >> --- /dev/null >> +++ b/tools/xz_wrap.sh >> @@ -0,0 +1,45 @@ >> +#!/bin/sh >> +# >> +# This is a wrapper for xz to use appropriate compression options depending >> +# on what is being compressed. The only argument to this script should be >> +# "kernel" or "misc" to indicate what is being compressed. > > What do we use? > >> +# Author: Lasse Collin <lasse.collin@tukaani.org> >> +# >> +# This file has been put into the public domain. >> +# You can do whatever you want with this file. >> +# >> + >> +# Defaults: No BCJ filter and no extra LZMA2 options. >> +BCJ= >> +LZMA2OPTS= >> + >> +# Big dictionary is OK for the kernel image, but it's not OK >> +# for other things. >> +# >> +# BCJ filter is used only for the kernel, at least for now. >> +# It could be useful for non-trivial initramfs too, but it >> +# depends on the exact content of the initramfs image. >> +case $1 in >> + kernel) >> + DICT=16MiB >> + case $ARCH in >> + x86|x86_64) BCJ=--x86 ;; >> + powerpc) BCJ=--powerpc ;; >> + ia64) BCJ=--ia64; LZMA2OPTS=pb=4 ;; >> + arm) BCJ=--arm ;; >> + sparc) BCJ=--sparc ;; >> + esac > > Error handling for other architectures? > This is from xz embedded module and I just copied into scripts directory. I will remove xz in the next iteration. Thanks again for your detailed review. best regards, luigi > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de > ACHTUNG!!! > > Das machine is nicht fur gefingerpoken und mittengrabben. Ist easy > schnappen der springenwerk, blowenfusen und corkenpoppen mit spitzen- > sparken. Ist nicht fur gewerken by das dummkopfen. Das rubbernecken > sightseeren keepen hands in das pockets. Relaxen und vatch das > blinkenlights!!! > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
diff --git a/.gitignore b/.gitignore index e71f6ac..8db8f0f 100644 --- a/.gitignore +++ b/.gitignore @@ -23,6 +23,12 @@ /u-boot.hex /u-boot.map /u-boot.bin +/u-boot.bin.bz2 +/u-boot.bin.gz +/u-boot.bin.lzma +/u-boot.bin.lzo +/u-boot.bin.xz +/u-boot.dis /u-boot.srec /u-boot.ldr /u-boot.ldr.hex @@ -30,6 +36,20 @@ /u-boot.lds /u-boot-onenand.bin /u-boot-flexonenand.bin +/u-boot-bootstrap +/u-boot-bootstrap.hex +/u-boot-bootstrap.map +/u-boot-bootstrap.bin +/u-boot-bootstrap.bin.bz2 +/u-boot-bootstrap.bin.gz +/u-boot-bootstrap.bin.lzma +/u-boot-bootstrap.bin.lzo +/u-boot-bootstrap.dis +/u-boot-bootstrap.srec +/u-boot-bootstrap.ldr +/u-boot-bootstrap.ldr.hex +/u-boot-bootstrap.ldr.srec +/u-boot-bootstrap.lds # # Generated files @@ -39,7 +59,7 @@ /LOG /errlog /reloc_off - +/.payload.s /include/generated/ /lib/asm-offsets.s @@ -66,3 +86,6 @@ cscope.* /onenand_ipl/onenand-ipl* /onenand_ipl/board/*/onenand* /onenand_ipl/board/*/*.S +examples/standalone/ + +setvars diff --git a/Makefile b/Makefile index ba832a4..cbd9a57 100644 --- a/Makefile +++ b/Makefile @@ -180,6 +180,13 @@ endif OBJS := $(addprefix $(obj),$(OBJS)) +ifeq ($(CONFIG_BOOTSTRAP),y) +BOOTSTRAP_OBJS = $(CPUDIR)/start_bootstrap.o + +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_OBJS)) +endif + + LIBS = lib/libgeneric.o LIBS += lib/lzma/liblzma.o LIBS += lib/lzo/liblzo.o @@ -270,6 +277,24 @@ LIBS := $(addprefix $(obj),$(sort $(LIBS))) LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) +ifeq ($(CONFIG_BOOTSTRAP),y) +BOOTSTRAP_LIBS = lib/libgeneric_bootstrap.o +BOOTSTRAP_LIBS += arch/$(ARCH)/cpu/lib$(ARCH)_bootstrap.o +BOOTSTRAP_LIBS += arch/$(ARCH)/lib/lib$(ARCH)_bootstrap.o +BOOTSTRAP_LIBS += common/libcommon_bootstrap.o +BOOTSTRAP_LIBS += drivers/serial/libserial.o + +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_LZMA) += lib/lzma/liblzma.o +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_LZO) += lib/lzo/liblzo.o +BOOTSTRAP_LIBS-$(CONFIG_BOOTSTRAP_XZ) += lib/xz/libxz.o +BOOTSTRAP_LIBS += $(BOOTSTRAP_LIBS-y) + +.PHONY : $(BOOTSTRAP_LIBS) + +BOOTSTRAP_LIBBOARD = board/$(BOARDDIR)/lib$(BOARD)_bootstrap.o +BOOTSTRAP_LIBBOARD := $(addprefix $(obj),$(BOOTSTRAP_LIBBOARD)) +endif + # Add GCC lib ifdef USE_PRIVATE_LIBGCC ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") @@ -283,6 +308,9 @@ endif PLATFORM_LIBS += $(PLATFORM_LIBGCC) export PLATFORM_LIBS +BOOTSTRAP_PLATFORM_LIBS += $(PLATFORM_LIBGCC) +export BOOTSTRAP_PLATFORM_LIBS + # Special flags for CPP when processing the linker script. # Pass the version down so we can handle backwards compatibility # on the fly. @@ -305,6 +333,9 @@ endif __OBJS := $(subst $(obj),,$(OBJS)) __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) +__BOOTSTRAP_OBJS := $(subst $(obj),,$(BOOTSTRAP_OBJS)) +__BOOTSTRAP_LIBS := $(subst $(obj),,$(BOOTSTRAP_LIBS)) $(subst $(obj),,$(BOOTSTRAP_LIBBOARD)) + ######################################################################### ######################################################################### @@ -326,6 +357,10 @@ endif # Always append ALL so that arch config.mk's can add custom ones ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) +ifeq ($(CONFIG_BOOTSTRAP),y) +ALL += $(obj)u-boot-bootstrap.srec $(obj)u-boot-bootstrap.bin +endif + all: $(ALL) $(obj)u-boot.hex: $(obj)u-boot @@ -338,6 +373,21 @@ $(obj)u-boot.bin: $(obj)u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ $(BOARD_SIZE_CHECK) +$(obj)u-boot.bin.gz: $(obj)u-boot.bin + gzip -c $< > $@ + +$(obj)u-boot.bin.lzma: $(obj)u-boot.bin + lzma -e -z -c $< > $@ + +$(obj)u-boot.bin.xz: $(obj)u-boot.bin + tools/xz_wrap.sh misc < $< > $@ + +$(obj)u-boot.bin.lzo: $(obj)u-boot.bin + lzop -9 -c $< > $@ + +$(obj)u-boot.bin.bz2: $(obj)u-boot.bin + bzip2 --best -z -c $< > $@ + $(obj)u-boot.ldr: $(obj)u-boot $(CREATE_LDR_ENV) $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) @@ -373,7 +423,7 @@ $(obj)u-boot.dis: $(obj)u-boot GEN_UBOOT = \ UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + cd $(LNDIR) && $(LD) --gc-sections $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot $(obj)u-boot: depend \ @@ -396,6 +446,118 @@ $(LIBS): depend $(SUBDIRS) $(LIBBOARD): depend $(LIBS) $(MAKE) -C $(dir $(subst $(obj),,$@)) +# Bootstrap targets + +ifeq ($(CONFIG_BOOTSTRAP),y) +$(obj)u-boot-bootstrap.hex: $(obj)u-boot-bootstrap + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ + +$(obj)u-boot-bootstrap.srec: $(obj)u-boot-bootstrap + $(OBJCOPY) -O srec $< $@ + +$(obj)u-boot-bootstrap.bin: $(obj)u-boot-bootstrap + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + $(BOARD_SIZE_CHECK) + +$(obj)u-boot-bootstrap.bin.gz: $(obj)u-boot-bootstrap.bin + gzip -c $< > $@ + +$(obj)u-boot-bootstrap.bin.lzma: $(obj)u-boot-bootstrap.bin + lzma -e -z -c $< > $@ + +$(obj)u-boot.bin-bootstrap.lzo: $(obj)u-boot-bootstrap.bin + lzop -9 -c $< > $@ + +$(obj)u-boot.bin-bootstrap.bz2: $(obj)u-boot-bootstrap.bin + bzip2 --best -z -c $< > $@ + +$(obj)u-boot-bootstrap.ldr: $(obj)u-boot-bootstrap + $(CREATE_LDR_ENV) + $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) + $(BOARD_SIZE_CHECK) + +$(obj)u-boot-bootstrap.ldr.hex: $(obj)u-boot-bootstrap.ldr + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary + +$(obj)u-boot-bootstrap.ldr.srec: $(obj)u-boot-bootstrap.ldr + $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary + +$(obj)u-boot-bootstrap.img: $(obj)u-boot-bootstrap.bin + $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ + -a $(CONFIG_BOOTSTRAP_BASE) -e 0 \ + -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ + sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ + -d $< $@ + +$(obj)u-boot-bootstrap.imx: $(obj)u-boot-bootstrap.bin + $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ + -e $(CONFIG_BOOTSTRAP_BASE) -d $< $@ + +$(obj)u-boot-bootstrap.kwb: $(obj)u-boot-bootstrap.bin + $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ + +$(obj)u-boot-bootstrap.sha1: $(obj)u-boot-bootstrap.bin + $(obj)tools/ubsha1 $(obj)u-boot-bootstrap.bin + +$(obj)u-boot-bootstrap.dis: $(obj)u-boot-bootstrap + $(OBJDUMP) -d $< > $@ + +PAYLOAD_FILE_BASE=$(obj)u-boot.bin +ifeq ($(CONFIG_BOOTSTRAP_GZIP),y) +PAYLOAD_FILE_EXT:=.gz +endif +ifeq ($(CONFIG_BOOTSTRAP_LZMA),y) +PAYLOAD_FILE_EXT:=.lzma +endif +ifeq ($(CONFIG_BOOTSTRAP_LZO),y) +PAYLOAD_FILE_EXT:=.lzo +endif +ifeq ($(CONFIG_BOOTSTRAP_BZIP2),y) +PAYLOAD_FILE_EXT:=.bz2 +endif +ifeq ($(CONFIG_BOOTSTRAP_XZ),y) +PAYLOAD_FILE_EXT:=.xz +endif + +PAYLOAD_FILE := $(PAYLOAD_FILE_BASE)$(PAYLOAD_FILE_EXT) + +$(obj).payload.s: $(PAYLOAD_FILE) + echo ".globl payload_start" > $@ + echo ".globl payload_end" >> $@ + echo ".globl payload_size" >> $@ + echo ".globl payload_uncsize" >> $@ + echo .section .payload,\"a\",@progbits >> $@ + echo "payload_size:" >> $@ + echo -n ".word " >> $@ + wc -c $(PAYLOAD_FILE) | cut -f1 -d' ' >> $@ + echo "payload_uncsize:" >> $@ + echo -n ".word " >> $@ + wc -c $(obj)u-boot.bin | cut -f1 -d' ' >> $@ + echo "payload_start:" >> $@ + echo .incbin \"$(PAYLOAD_FILE)\" >> $@ + echo "payload_end:" >> $@ + +GEN_UBOOT_BOOTSTRAP = \ + UNDEF_SYM=`$(OBJDUMP) -x $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) | \ + sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ + cd $(LNDIR) && $(LD) --gc-sections $(BOOTSTRAP_LDFLAGS) $$UNDEF_SYM $(obj).payload.o $(__BOOTSTRAP_OBJS) \ + --start-group $(__BOOTSTRAP_LIBS) --end-group $(BOOTSTRAP_PLATFORM_LIBS) \ + -Map u-boot-bootstrap.map -o u-boot-bootstrap +$(obj)u-boot-bootstrap: depend $(SUBDIRS) $(BOOTSTRAP_OBJS) $(BOOTSTRAP_LIBBOARD) $(BOOTSTRAP_LIBS) $(BOOTSTRAP_LDSCRIPT) $(obj)u-boot-bootstrap.lds $(obj).payload.o + $(GEN_UBOOT_BOOTSTRAP) +ifeq ($(CONFIG_KALLSYMS),y) + smap=`$(call SYSTEM_MAP,u-boot-bootstrap) | \ + awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ + $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ + -c common/system_map.c -o $(obj)common/system_map.o + $(GEN_UBOOT_BOOTSTRAP) $(obj)common/system_map.o +endif + +$(BOOTSTRAP_LIBBOARD): depend $(BOOTSTRAP_LIBS) + $(MAKE) -C $(dir $(subst $(obj),,$@)) $(notdir $@) +endif + $(SUBDIRS): depend $(MAKE) -C $@ all @@ -405,6 +567,9 @@ $(LDSCRIPT): depend $(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +$(obj)u-boot-bootstrap.lds: $(BOOTSTRAP_LDSCRIPT) + $(CPP) $(CPPFLAGS) $(BOOTSTRAP_LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) depend $(MAKE) -C nand_spl/board/$(BOARDDIR) all @@ -1222,6 +1387,7 @@ clean: $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)u-boot.lds \ + $(obj)u-boot-bootstrap.lds \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)lib/asm-offsets.s @@ -1245,6 +1411,12 @@ clobber: clean @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) @rm -f $(obj)u-boot.kwb @rm -f $(obj)u-boot.imx + @rm -f $(obj)u-boot.bin{.gz,.lzma,.lzo,.bz2,.xz} + @rm -f $(obj)u-boot-bootstrap $(obj)u-boot-bootstrap.map $(obj)u-boot-bootstrap.hex + @rm -f $(obj)u-boot-bootstrap.kwb + @rm -f $(obj)u-boot-bootstrap.imx + @rm -f $(obj)u-boot-bootstrap.bin{.gz,.lzma,.lzo,.bz2,.xz} + @rm -f $(obj).payload.s @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm diff --git a/README b/README index 90c19a9..3b27e2f 100644 --- a/README +++ b/README @@ -1945,6 +1945,53 @@ The following options need to be configured: example, some LED's) on your board. At the moment, the following checkpoints are implemented: +- Compressed U-Boot support: + CONFIG_BOOTSTRAP_BASE + + This option enables the Boostrap infrastructure. + The bootstrap code consists of a small binary that is able + to decompress an attached payload (a full U-Boot image), + allowing to have a small but also full featured U-Boot + bootloader. + + The bootstrap supports BZIP2, GZIP, LZMA, LZO and XZ payload + formats as well as flat/uncompressed payload (useful for debug). + + The boot sequence will be divided in the following stages: + + 1) bootstrap: + - Lowlevel initiliazation + - Bootstrap code relocation (if needed) + - Dynamic memory initialization (if needed) + - Payload uncompression or copy to RAM + 2) Jump to uncompressed full U-Boot (into RAM) + + CONFIG_BOOTSTRAP_SKIP_LOWLEVEL_INIT + + Skip lowlevel initialization. + + CONFIG_BOOTSTRAP_TEXT_BASE + + TEXT_BASE address of the bootstrap code. + + CONFIG_BOOTSTRAP_BAUDRATE + + Serial port baudrate at bootstrap. + + CONFIG_BOOTSTRAP_BZIP2 + CONFIG_BOOTSTRAP_GZIP + CONFIG_BOOTSTRAP_LZMA + CONFIG_BOOTSTRAP_LZO + CONFIG_BOOTSTRAP_XZ + + Enable BZIP2, GZIP, LZMA, LZO or XZ payload support. If anyone is defined, + an uncompressed payload will used. + + BOOTSTRAP_LDSCRIPT + + LD script for bootstrap code. If not defined, a board specific script will be + used. + Legacy uImage format: Arg Where When diff --git a/common/Makefile b/common/Makefile index abea91c..ec1c6e9 100644 --- a/common/Makefile +++ b/common/Makefile @@ -24,6 +24,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)libcommon.o +BOOTSTRAP_LIB = $(obj)libcommon_bootstrap.o + +BOOTSTRAP_LIB-$(CONFIG_BOOTSTRAP) = $(BOOTSTRAP_LIB) # core COBJS-y += main.o @@ -165,20 +168,29 @@ COBJS-$(CONFIG_MODEM_SUPPORT) += modem.o COBJS-$(CONFIG_UPDATE_TFTP) += update.o COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_GZIP) += dlmalloc.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += dlmalloc.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += console_bootstrap.o + +BOOTSTRAP_COBJS := $(sort $(BOOTSTRAP_COBJS-y)) +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_COBJS)) COBJS := $(sort $(COBJS-y)) XCOBJS := $(sort $(XCOBJS-y)) -SRCS := $(COBJS:.o=.c) $(XCOBJS:.o=.c) +SRCS := $(sort $(COBJS:.o=.c) $(XCOBJS:.o=.c) $(BOOTSTRAP_COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(COBJS)) XOBJS := $(addprefix $(obj),$(XCOBJS)) CPPFLAGS += -I.. -all: $(LIB) $(XOBJS) +all: $(LIB) $(BOOTSTRAP_LIB-y) $(XOBJS) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(BOOTSTRAP_LIB): $(obj).depend $(BOOTSTRAP_OBJS) + $(call cmd_link_o_target, $(BOOTSTRAP_OBJS)) + $(obj)env_embedded.o: $(src)env_embedded.c $(obj)../tools/envcrc $(CC) $(AFLAGS) -Wa,--no-warn \ -DENV_CRC=$(shell $(obj)../tools/envcrc) \ diff --git a/common/console_bootstrap.c b/common/console_bootstrap.c new file mode 100644 index 0000000..cdd4a62 --- /dev/null +++ b/common/console_bootstrap.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <stdarg.h> +#include <malloc.h> + +/** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/ + +int getc(void) +{ + /* Send directly to the handler */ + return serial_getc(); +} + +int tstc(void) +{ + /* Send directly to the handler */ + return serial_tstc(); +} + +void putc(const char c) +{ + /* Send directly to the handler */ + serial_putc(c); +} + +void puts(const char *s) +{ + serial_puts(s); +} + +int printf(const char *fmt, ...) +{ + va_list args; + uint i; + char printbuffer[CONFIG_SYS_PBSIZE]; + + va_start(args, fmt); + + /* For this to work, printbuffer must be larger than + * anything we ever want to print. + */ + i = vsprintf(printbuffer, fmt, args); + va_end(args); + + /* Print the string */ + puts(printbuffer); + return i; +} + +int vprintf(const char *fmt, va_list args) +{ + uint i; + char printbuffer[CONFIG_SYS_PBSIZE]; + + /* For this to work, printbuffer must be larger than + * anything we ever want to print. + */ + i = vsprintf(printbuffer, fmt, args); + + /* Print the string */ + puts(printbuffer); + return i; +} diff --git a/config.mk b/config.mk index 591b490..81a4efb 100644 --- a/config.mk +++ b/config.mk @@ -166,6 +166,11 @@ else LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds endif endif +ifeq ($(CONFIG_BOOTSTRAP),y) +ifndef BOOTSTRAP_LDSCRIPT +BOOTSTRAP_LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-bootstrap.lds +endif +endif OBJCFLAGS += --gap-fill=0xff gccincdir := $(shell $(CC) -print-file-name=include) @@ -176,6 +181,10 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),) CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) endif +ifneq ($(CONFIG_BOOTSTRAP_TEXT_BASE),) +CPPFLAGS += -DCONFIG_BOOTSTRAP_TEXT_BASE=$(CONFIG_BOOTSTRAP_TEXT_BASE) +endif + ifneq ($(RESET_VECTOR_ADDRESS),) CPPFLAGS += -DRESET_VECTOR_ADDRESS=$(RESET_VECTOR_ADDRESS) endif @@ -222,6 +231,13 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),) LDFLAGS += -Ttext $(CONFIG_SYS_TEXT_BASE) endif +ifeq ($(CONFIG_BOOTSTRAP),y) +BOOTSTRAP_LDFLAGS += -Bstatic -T $(obj)u-boot-bootstrap.lds $(PLATFORM_LDFLAGS) +ifneq ($(CONFIG_BOOTSTRAP_TEXT_BASE),) +BOOTSTRAP_LDFLAGS += -Ttext $(CONFIG_BOOTSTRAP_TEXT_BASE) +endif +endif + # Location of a usable BFD library, where we define "usable" as # "built for ${HOST}, supports ${TARGET}". Sensible values are # - When cross-compiling: the root of the cross-environment diff --git a/include/bootstrap.h b/include/bootstrap.h new file mode 100644 index 0000000..f49045d --- /dev/null +++ b/include/bootstrap.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BOOTSTRAP_H_ +#define __BOOTSTRAP_H_ 1 + +#include <common.h> + +#ifdef CONFIG_BOOTSTRAP_BZIP2 +#define _CONFIG_BOOTSTRAP_RELOCATE +#define _CONFIG_BOOTSTRAP_MALLOC +// #define _CONFIG_BOOTSTRAP_FAKEMALLOC +#endif + +#ifdef CONFIG_BOOTSTRAP_GZIP +// #define _CONFIG_BOOTSTRAP_RELOCATE +#define _CONFIG_BOOTSTRAP_MALLOC +#define _CONFIG_BOOTSTRAP_FAKEMALLOC +#endif + +#ifdef CONFIG_BOOTSTRAP_LZMA +// #define _CONFIG_BOOTSTRAP_RELOCATE +#define _CONFIG_BOOTSTRAP_MALLOC +#define _CONFIG_BOOTSTRAP_FAKEMALLOC +#endif + +#ifdef CONFIG_BOOTSTRAP_LZO +// #define _CONFIG_BOOTSTRAP_RELOCATE +// #define _CONFIG_BOOTSTRAP_MALLOC +// #define _CONFIG_BOOTSTRAP_FAKEMALLOC +#endif + +#ifdef CONFIG_BOOTSTRAP_XZ +// #define _CONFIG_BOOTSTRAP_RELOCATE +#define _CONFIG_BOOTSTRAP_MALLOC +#define _CONFIG_BOOTSTRAP_FAKEMALLOC +#endif + +#endif /* __BOOTSTRAP_H_ */ diff --git a/include/common.h b/include/common.h index 189ad81..690cba2 100644 --- a/include/common.h +++ b/include/common.h @@ -723,6 +723,27 @@ int cpu_disable(int nr); int cpu_release(int nr, int argc, char * const argv[]); #endif +/* Bootstrap specific code */ +#ifdef CONFIG_BOOTSTRAP +void bootstrap_hang(void) __attribute__ ((noreturn)); +void bootstrap_board_init_f(ulong) __attribute__ ((noreturn)); +void bootstrap_board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); +int bootstrap_checkboard(void); + +int bootstrap_serial_init(void); +void bootstrap_serial_exit(void); +void bootstrap_serial_setbrg(void); +void bootstrap_serial_putc(const char); +void bootstrap_serial_putc_raw(const char); +void bootstrap_serial_puts(const char *); +int bootstrap_serial_getc(void); +int bootstrap_serial_tstc(void); + +phys_size_t bootstrap_initdram (int); + +int copy_uboot(void *dst, size_t unc_size, void *src, size_t size); +#endif + #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */ diff --git a/lib/Makefile b/lib/Makefile index ffdee7d..3795ed3 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -24,6 +24,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)libgeneric.o +BOOTSTRAP_LIB = $(obj)libgeneric_bootstrap.o + +BOOTSTRAP_LIB-$(CONFIG_BOOTSTRAP) = $(BOOTSTRAP_LIB) COBJS-$(CONFIG_ADDR_MAP) += addr_map.o COBJS-$(CONFIG_BZIP2) += bzlib.o @@ -54,13 +57,37 @@ COBJS-y += vsprintf.o COBJS-$(CONFIG_ZLIB) += zlib.o COBJS-$(CONFIG_RBTREE) += rbtree.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += string.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += vsprintf.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += div64.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += ctype.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += time.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) += bootstrap.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_GZIP) += zlib.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_GZIP) += gunzip.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_GZIP) += crc32.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += bzlib.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += bzlib_crctable.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += bzlib_decompress.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += bzlib_randtable.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_BZIP2) += bzlib_huffman.o +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP_XZ) += crc32.o + +BOOTSTRAP_COBJS := $(BOOTSTRAP_COBJS-y) +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_COBJS)) + COBJS := $(COBJS-y) -SRCS := $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) $(BOOTSTRAP_COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) +all: $(LIB) $(BOOTSTRAP_LIB-y) + $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(BOOTSTRAP_LIB): $(obj).depend $(BOOTSTRAP_OBJS) + $(call cmd_link_o_target, $(BOOTSTRAP_OBJS)) + ######################################################################### # defines $(obj).depend target diff --git a/lib/bootstrap.c b/lib/bootstrap.c new file mode 100644 index 0000000..1ae5cfc --- /dev/null +++ b/lib/bootstrap.c @@ -0,0 +1,97 @@ +/* + * (C) Copyright 2010 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini, luigi.mantellini@idf-hit.com + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <stdio_dev.h> + +#ifdef CONFIG_BOOTSTRAP_LZMA +#include <lzma/LzmaTypes.h> +#include <lzma/LzmaDec.h> +#include <lzma/LzmaTools.h> +#endif /* CONFIG_BOOTSTRAP_LZMA */ + +#ifdef CONFIG_BOOTSTRAP_LZO +#include <linux/lzo.h> +#endif /* CONFIG_BOOTSTRAP_LZO */ + +#ifdef CONFIG_BOOTSTRAP_BZIP2 +#include <bzlib.h> +#endif + +#ifdef CONFIG_BOOTSTRAP_XZ +#include <unxz.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static const char *algo = +#if defined(CONFIG_BOOTSTRAP_GZIP) + "gzip"; +#elif defined(CONFIG_BOOTSTRAP_LZMA) + "lzma"; +#elif defined(CONFIG_BOOTSTRAP_LZO) + "lzo"; +#elif defined(CONFIG_BOOTSTRAP_BZIP2) + "bzip2"; +#elif defined(CONFIG_BOOTSTRAP_XZ) + "xz"; +#else + "flat"; +#endif + + +int copy_uboot(void *dst, size_t unc_size, void *src, size_t size) +{ + int ret; + debug("copy from %p (%d) to %p (%d)\n", src, size, dst, unc_size); + + printf("Uncompressing payload (%s)...", algo); +#if defined(CONFIG_BOOTSTRAP_GZIP) + ret = gunzip(dst, unc_size, src, &size); +#elif defined(CONFIG_BOOTSTRAP_LZMA) + SizeT outsize = unc_size; + ret = lzmaBuffToBuffDecompress(dst, &outsize, src, size); +#elif defined(CONFIG_BOOTSTRAP_LZO) + uint unc_len = unc_size; + ret = lzop_decompress(src, size, dst, &unc_len); +#elif defined(CONFIG_BOOTSTRAP_BZIP2) + uint unc_len = unc_size; + ret = BZ2_bzBuffToBuffDecompress ((char*)dst, &unc_len, (char *)src, size, CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0); +#elif defined(CONFIG_BOOTSTRAP_XZ) + ret = unxz(src, size, dst, &unc_size); +#else + memcpy(dst, src, size); + ret = 0; +#endif + if (ret) { + printf("failed with error %d.\n", ret); + bootstrap_hang(); + } else { + puts("done.\n"); + } + return ret; +} \ No newline at end of file diff --git a/lib/lzma/Makefile b/lib/lzma/Makefile index 4d3401d..395b8dc 100644 --- a/lib/lzma/Makefile +++ b/lib/lzma/Makefile @@ -32,7 +32,9 @@ SOBJS = CFLAGS += -D_LZMA_PROB32 -COBJS-$(CONFIG_LZMA) += LzmaDec.o LzmaTools.o +COBJS-$(CONFIG_LZMA)$(CONFIG_BOOTSTRAP_LZMA) += LzmaDec.o LzmaTools.o + +COBJS-y += $(COBJS-yy) COBJS = $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/lib/lzo/Makefile b/lib/lzo/Makefile index 69bc839..c8d7fa5 100644 --- a/lib/lzo/Makefile +++ b/lib/lzo/Makefile @@ -27,7 +27,9 @@ LIB = $(obj)liblzo.o SOBJS = -COBJS-$(CONFIG_LZO) += lzo1x_decompress.o +COBJS-$(CONFIG_LZO)$(CONFIG_BOOTSTRAP_LZO) += lzo1x_decompress.o + +COBJS-y += $(OBJS-yy) COBJS = $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/lib/xz/Makefile b/lib/xz/Makefile index 3cfeab4..b71fb97 100644 --- a/lib/xz/Makefile +++ b/lib/xz/Makefile @@ -32,7 +32,9 @@ SOBJS = CFLAGS += -COBJS-$(CONFIG_XZ) += decompress_unxz.o +COBJS-$(CONFIG_XZ)$(CONFIG_BOOTSTRAP_XZ) += decompress_unxz.o + +COBJS-y += $(COBJS-yy) COBJS = $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/tools/xz_wrap.sh b/tools/xz_wrap.sh new file mode 100755 index 0000000..dbe5e55 --- /dev/null +++ b/tools/xz_wrap.sh @@ -0,0 +1,45 @@ +#!/bin/sh +# +# This is a wrapper for xz to use appropriate compression options depending +# on what is being compressed. The only argument to this script should be +# "kernel" or "misc" to indicate what is being compressed. +# +# Author: Lasse Collin <lasse.collin@tukaani.org> +# +# This file has been put into the public domain. +# You can do whatever you want with this file. +# + +# Defaults: No BCJ filter and no extra LZMA2 options. +BCJ= +LZMA2OPTS= + +# Big dictionary is OK for the kernel image, but it's not OK +# for other things. +# +# BCJ filter is used only for the kernel, at least for now. +# It could be useful for non-trivial initramfs too, but it +# depends on the exact content of the initramfs image. +case $1 in + kernel) + DICT=16MiB + case $ARCH in + x86|x86_64) BCJ=--x86 ;; + powerpc) BCJ=--powerpc ;; + ia64) BCJ=--ia64; LZMA2OPTS=pb=4 ;; + arm) BCJ=--arm ;; + sparc) BCJ=--sparc ;; + esac + ;; + misc) + DICT=1MiB + ;; + *) + echo "xz_wrap.sh: Invalid argument \`$1'" >&2 + exit 1 + ;; +esac + +# This is very slow, but it should give very good compression too. +exec xz --stdout --quiet --threads=1 --check=crc32 \ + $BCJ --lzma2=preset=6e,$LZMA2OPTS,dict=$DICT
See README file for details regarding ho bootstrap code works. Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com> --- .gitignore | 25 ++++++- Makefile | 174 +++++++++++++++++++++++++++++++++++++++++++- README | 47 ++++++++++++ common/Makefile | 16 ++++- common/console_bootstrap.c | 85 +++++++++++++++++++++ config.mk | 16 ++++ include/bootstrap.h | 59 +++++++++++++++ include/common.h | 21 +++++ lib/Makefile | 29 +++++++- lib/bootstrap.c | 97 ++++++++++++++++++++++++ lib/lzma/Makefile | 4 +- lib/lzo/Makefile | 4 +- lib/xz/Makefile | 4 +- tools/xz_wrap.sh | 45 +++++++++++ 14 files changed, 618 insertions(+), 8 deletions(-) create mode 100644 common/console_bootstrap.c create mode 100644 include/bootstrap.h create mode 100644 lib/bootstrap.c create mode 100755 tools/xz_wrap.sh