diff mbox series

PCI: mediatek: take use of PCI_NUM_INTX

Message ID 1504055954-31545-1-git-send-email-honghui.zhang@mediatek.com
State Accepted
Headers show
Series PCI: mediatek: take use of PCI_NUM_INTX | expand

Commit Message

Honghui Zhang Aug. 30, 2017, 1:19 a.m. UTC 
From: Honghui Zhang <honghui.zhang@mediatek.com>

Switch from using a custom NUM_INTX macro to the generic PCI_NUM_INTX
definition for the number of INTx interrupts.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
---
 drivers/pci/host/pcie-mediatek.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Honghui Zhang Aug. 30, 2017, 1:44 a.m. UTC | #1 
On Wed, 2017-08-30 at 09:19 +0800, honghui.zhang@mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
> 
> Switch from using a custom NUM_INTX macro to the generic PCI_NUM_INTX
> definition for the number of INTx interrupts.
> 
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
> ---
>  drivers/pci/host/pcie-mediatek.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 

Hi, Bjorn, Ryder,
	this patch is based on Paul's v7 version of patch[1]("Move enum
pci_interrupt_pin to linux/pci.h").
[1]http://www.spinics.net/lists/linux-pci/msg63891.html

Thanks.

> diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> index c567996..5c0ce9b 100644
> --- a/drivers/pci/host/pcie-mediatek.c
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -77,7 +77,6 @@
>  #define PCIE_INT_MASK		0x420
>  #define INTX_MASK		GENMASK(19, 16)
>  #define INTX_SHIFT		16
> -#define INTX_NUM		4
>  #define PCIE_INT_STATUS		0x424
>  #define MSI_STATUS		BIT(23)
>  #define PCIE_IMSI_STATUS	0x42c
> @@ -576,7 +575,7 @@ static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
>  		return -ENODEV;
>  	}
>  
> -	port->irq_domain = irq_domain_add_linear(pcie_intc_node, INTX_NUM,
> +	port->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
>  						 &intx_domain_ops, port);
>  	if (!port->irq_domain) {
>  		dev_err(dev, "failed to get INTx IRQ domain\n");
> @@ -594,7 +593,7 @@ static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
>  	u32 bit = INTX_SHIFT;
>  
>  	while ((status = readl(port->base + PCIE_INT_STATUS)) & INTX_MASK) {
> -		for_each_set_bit_from(bit, &status, INTX_NUM + INTX_SHIFT) {
> +		for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
>  			/* Clear the INTx */
>  			writel(1 << bit, port->base + PCIE_INT_STATUS);
>  			virq = irq_find_mapping(port->irq_domain,
Bjorn Helgaas Aug. 30, 2017, 1:24 p.m. UTC | #2 
On Wed, Aug 30, 2017 at 09:19:14AM +0800, honghui.zhang@mediatek.com wrote:
> From: Honghui Zhang <honghui.zhang@mediatek.com>
> 
> Switch from using a custom NUM_INTX macro to the generic PCI_NUM_INTX
> definition for the number of INTx interrupts.
> 
> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>

I rebased pci/host-mediatek on top of pci/irq-intx (which adds
PCI_NUM_INTX) and applied this for v4.14, thanks!

> ---
>  drivers/pci/host/pcie-mediatek.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
> index c567996..5c0ce9b 100644
> --- a/drivers/pci/host/pcie-mediatek.c
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -77,7 +77,6 @@
>  #define PCIE_INT_MASK		0x420
>  #define INTX_MASK		GENMASK(19, 16)
>  #define INTX_SHIFT		16
> -#define INTX_NUM		4
>  #define PCIE_INT_STATUS		0x424
>  #define MSI_STATUS		BIT(23)
>  #define PCIE_IMSI_STATUS	0x42c
> @@ -576,7 +575,7 @@ static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
>  		return -ENODEV;
>  	}
>  
> -	port->irq_domain = irq_domain_add_linear(pcie_intc_node, INTX_NUM,
> +	port->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
>  						 &intx_domain_ops, port);
>  	if (!port->irq_domain) {
>  		dev_err(dev, "failed to get INTx IRQ domain\n");
> @@ -594,7 +593,7 @@ static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
>  	u32 bit = INTX_SHIFT;
>  
>  	while ((status = readl(port->base + PCIE_INT_STATUS)) & INTX_MASK) {
> -		for_each_set_bit_from(bit, &status, INTX_NUM + INTX_SHIFT) {
> +		for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
>  			/* Clear the INTx */
>  			writel(1 << bit, port->base + PCIE_INT_STATUS);
>  			virq = irq_find_mapping(port->irq_domain,
> -- 
> 2.6.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
index c567996..5c0ce9b 100644
--- a/drivers/pci/host/pcie-mediatek.c
+++ b/drivers/pci/host/pcie-mediatek.c
@@ -77,7 +77,6 @@ 
 #define PCIE_INT_MASK		0x420
 #define INTX_MASK		GENMASK(19, 16)
 #define INTX_SHIFT		16
-#define INTX_NUM		4
 #define PCIE_INT_STATUS		0x424
 #define MSI_STATUS		BIT(23)
 #define PCIE_IMSI_STATUS	0x42c
@@ -576,7 +575,7 @@  static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
 		return -ENODEV;
 	}
 
-	port->irq_domain = irq_domain_add_linear(pcie_intc_node, INTX_NUM,
+	port->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
 						 &intx_domain_ops, port);
 	if (!port->irq_domain) {
 		dev_err(dev, "failed to get INTx IRQ domain\n");
@@ -594,7 +593,7 @@  static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
 	u32 bit = INTX_SHIFT;
 
 	while ((status = readl(port->base + PCIE_INT_STATUS)) & INTX_MASK) {
-		for_each_set_bit_from(bit, &status, INTX_NUM + INTX_SHIFT) {
+		for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
 			/* Clear the INTx */
 			writel(1 << bit, port->base + PCIE_INT_STATUS);
 			virq = irq_find_mapping(port->irq_domain,