| Message ID | 20101109232501.17098.55112.sendpatchset@manic8ball.ltc.austin.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Benjamin Herrenschmidt |
| Headers | show |
On Tue, 2010-11-09 at 16:25 -0700, Jesse Larrew wrote: > From: Jesse Larrew <jlarrew@linux.vnet.ibm.com> > > This patch sets a timer during boot that will periodically poll the > associativity change counters in the VPA. When a change in > associativity is detected, it retrieves the new associativity domain > information via the H_HOME_NODE_ASSOCIATIVITY hcall and updates the > NUMA node maps and sysfs entries accordingly. Note that since the > ibm,associativity device tree property does not exist on configurations > with both NUMA and SPLPAR enabled, no device tree updates are necessary. > > Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> > --- No fundamental objection, just quick nits before I merge: > + > +/* Vrtual Processor Home Node (VPHN) support */ > +#define VPHN_NR_CHANGE_CTRS (8) > +static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; > +static cpumask_t cpu_associativity_changes_mask; > +static void topology_work_fn(struct work_struct *work); > +static DECLARE_WORK(topology_work, topology_work_fn); Remove the prototype for topology_work_fn() and puts the DECLARE_WORK right below the function itself. > +static void topology_timer_fn(unsigned long ignored); > +static struct timer_list topology_timer = > + TIMER_INITIALIZER(topology_timer_fn, 0, 0); Same deal. > +static void set_topology_timer(void); > +int stop_topology_update(void); > + > +/* > + * Store the current values of the associativity change counters in the > + * hypervisor. > + */ > +static void setup_cpu_associativity_change_counters(void) > +{ > + int cpu = 0; > + > + for_each_possible_cpu(cpu) { > + int i = 0; > + u8 *counts = vphn_cpu_change_counts[cpu]; > + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; > + > + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { > + counts[i] = hypervisor_counts[i]; > + } > + } > + > + return; > +} > + > +/* > + * The hypervisor maintains a set of 8 associativity change counters in > + * the VPA of each cpu that correspond to the associativity levels in the > + * ibm,associativity-reference-points property. When an associativity > + * level changes, the corresponding counter is incremented. > + * > + * Set a bit in cpu_associativity_changes_mask for each cpu whose home > + * node associativity levels have changed. > + */ > +static void update_cpu_associativity_changes_mask(void) > +{ > + int cpu = 0; > + cpumask_t *changes = &cpu_associativity_changes_mask; > + > + cpumask_clear(changes); > + > + for_each_possible_cpu(cpu) { > + int i; > + u8 *counts = vphn_cpu_change_counts[cpu]; > + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; > + > + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { > + if (hypervisor_counts[i] > counts[i]) { > + counts[i] = hypervisor_counts[i]; > + > + if (!(cpumask_test_cpu(cpu, changes))) > + cpumask_set_cpu(cpu, changes); > + } > + } This is a tad sub-optimal. I'd just set a local variable, and after the inside loop set the cpumask bit when that variable is set. Also, keep another variable that accumulate all bits set and return its value so you don't have to re-check the mask in the caller. cpumask operations can be expensive. > + } > + > + return; You don't need a return; at the end of a function. > +} > + > +/* 6 64-bit registers unpacked into 12 32-bit associativity values */ > +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) > + > +/* > + * Convert the associativity domain numbers returned from the hypervisor > + * to the sequence they would appear in the ibm,associativity property. > + */ > +static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) > +{ > + int i = 0; > + int nr_assoc_doms = 0; > + const u16 *field = (const u16*) packed; > + > +#define VPHN_FIELD_UNUSED (0xffff) > +#define VPHN_FIELD_MSB (0x8000) > +#define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) > + > + for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { > + if (*field == VPHN_FIELD_UNUSED) { > + /* All significant fields processed, and remaining > + * fields contain the reserved value of all 1's. > + * Just store them. > + */ > + unpacked[i] = *((u32*)field); > + field += 2; > + } > + else if (*field & VPHN_FIELD_MSB) { > + /* Data is in the lower 15 bits of this field */ > + unpacked[i] = *field & VPHN_FIELD_MASK; > + field++; > + nr_assoc_doms++; > + } > + else { > + /* Data is in the lower 15 bits of this field > + * concatenated with the next 16 bit field > + */ > + unpacked[i] = *((u32*)field); > + field += 2; > + nr_assoc_doms++; > + } > + } > + > + return nr_assoc_doms; > +} > + > +/* > + * Retrieve the new associativity information for a virtual processor's > + * home node. > + */ > +static long hcall_vphn(unsigned long cpu, unsigned int *associativity) > +{ > + long rc = 0; > + long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; > + u64 flags = 1; > + int hwcpu = get_hard_smp_processor_id(cpu); > + > + rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu); > + vphn_unpack_associativity(retbuf, associativity); > + > + return rc; > +} > + > +static long > +vphn_get_associativity(unsigned long cpu, unsigned int *associativity) > +{ Nowadays, we prefer keeping the "static long" and the function name on the same line. If you really want to avoid >80 col (I don't care myself much as long as you stick below 100) then move the second argument down one line. > + long rc = 0; > + > + rc = hcall_vphn(cpu, associativity); > + > + switch (rc) { > + case H_FUNCTION: > + printk(KERN_INFO > + "VPHN is not supported. Disabling polling...\n"); > + stop_topology_update(); > + break; > + case H_HARDWARE: > + printk(KERN_ERR > + "hcall_vphn() experienced a hardware fault " > + "preventing VPHN. Disabling polling...\n"); > + stop_topology_update(); > + } > + > + return rc; > +} > + > +/* > + * Update the node maps and sysfs entries for each cpu whose home node > + * has changed. > + */ > +int arch_update_cpu_topology(void) > +{ > + int cpu = 0, nid = 0, old_nid = 0; > + unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; > + struct sys_device *sysdev = NULL; > + > + for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { > + vphn_get_associativity(cpu, associativity); > + nid = associativity_to_nid(associativity); > + > + if (nid < 0 || !node_online(nid)) > + nid = first_online_node; > + > + old_nid = numa_cpu_lookup_table[cpu]; > + > + /* Disable hotplug while we update the cpu > + * masks and sysfs. > + */ > + get_online_cpus(); > + unregister_cpu_under_node(cpu, old_nid); > + unmap_cpu_from_node(cpu); > + map_cpu_to_node(cpu, nid); > + register_cpu_under_node(cpu, nid); > + put_online_cpus(); > + > + sysdev = get_cpu_sysdev(cpu); > + if (sysdev) > + kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); > + } > + > + return 1; > +} That looks terribly expensive. Might be worth considering adding a way to sysfs to "mv" an object around in the future. > +static void topology_work_fn(struct work_struct *work) > +{ > + rebuild_sched_domains(); > +} > + > +void topology_schedule_update(void) > +{ > + schedule_work(&topology_work); > +} > + > +static void topology_timer_fn(unsigned long ignored) > +{ > + update_cpu_associativity_changes_mask(); > + if (!cpumask_empty(&cpu_associativity_changes_mask)) > + topology_schedule_update(); > + set_topology_timer(); > +} I wonder if we really need that cpumask and timer overall. We might be better off just having a per-cpu copy of the counters and check them in the timer interrupt, it's low enough overhead don't you think ? > +static void set_topology_timer(void) > +{ > + topology_timer.data = 0; > + topology_timer.expires = jiffies + 60 * HZ; > + add_timer(&topology_timer); > +} > + > +/* > + * Start polling for VPHN associativity changes. > + */ > +int start_topology_update(void) > +{ > + int rc = 0; > + > + if (firmware_has_feature(FW_FEATURE_VPHN)) { > + setup_cpu_associativity_change_counters(); > + init_timer_deferrable(&topology_timer); > + set_topology_timer(); > + rc = 1; > + } > + > + return rc; > +} > +__initcall(start_topology_update); > + > +/* > + * Disable polling for VPHN associativity changes. > + */ > +int stop_topology_update(void) > +{ > + return del_timer(&topology_timer); > +} del_timer_sync() ? Cheers, Ben.
On 11/28/2010 10:44 PM, Benjamin Herrenschmidt wrote: > On Tue, 2010-11-09 at 16:25 -0700, Jesse Larrew wrote: >> From: Jesse Larrew <jlarrew@linux.vnet.ibm.com> >> >> This patch sets a timer during boot that will periodically poll the >> associativity change counters in the VPA. When a change in >> associativity is detected, it retrieves the new associativity domain >> information via the H_HOME_NODE_ASSOCIATIVITY hcall and updates the >> NUMA node maps and sysfs entries accordingly. Note that since the >> ibm,associativity device tree property does not exist on configurations >> with both NUMA and SPLPAR enabled, no device tree updates are necessary. >> >> Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> >> --- > > No fundamental objection, just quick nits before I merge: Thanks for the review! >> + >> +/* Vrtual Processor Home Node (VPHN) support */ >> +#define VPHN_NR_CHANGE_CTRS (8) >> +static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; >> +static cpumask_t cpu_associativity_changes_mask; >> +static void topology_work_fn(struct work_struct *work); >> +static DECLARE_WORK(topology_work, topology_work_fn); > > Remove the prototype for topology_work_fn() and puts the DECLARE_WORK > right below the function itself. > No problem. >> +static void topology_timer_fn(unsigned long ignored); >> +static struct timer_list topology_timer = >> + TIMER_INITIALIZER(topology_timer_fn, 0, 0); > > Same deal. > Ditto. >> +static void set_topology_timer(void); >> +int stop_topology_update(void); >> + >> +/* >> + * Store the current values of the associativity change counters in the >> + * hypervisor. >> + */ >> +static void setup_cpu_associativity_change_counters(void) >> +{ >> + int cpu = 0; >> + >> + for_each_possible_cpu(cpu) { >> + int i = 0; >> + u8 *counts = vphn_cpu_change_counts[cpu]; >> + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; >> + >> + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { >> + counts[i] = hypervisor_counts[i]; >> + } >> + } >> + >> + return; >> +} >> + >> +/* >> + * The hypervisor maintains a set of 8 associativity change counters in >> + * the VPA of each cpu that correspond to the associativity levels in the >> + * ibm,associativity-reference-points property. When an associativity >> + * level changes, the corresponding counter is incremented. >> + * >> + * Set a bit in cpu_associativity_changes_mask for each cpu whose home >> + * node associativity levels have changed. >> + */ >> +static void update_cpu_associativity_changes_mask(void) >> +{ >> + int cpu = 0; >> + cpumask_t *changes = &cpu_associativity_changes_mask; >> + >> + cpumask_clear(changes); >> + >> + for_each_possible_cpu(cpu) { >> + int i; >> + u8 *counts = vphn_cpu_change_counts[cpu]; >> + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; >> + >> + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { >> + if (hypervisor_counts[i] > counts[i]) { >> + counts[i] = hypervisor_counts[i]; >> + >> + if (!(cpumask_test_cpu(cpu, changes))) >> + cpumask_set_cpu(cpu, changes); >> + } >> + } > > This is a tad sub-optimal. I'd just set a local variable, and > after the inside loop set the cpumask bit when that variable is set. > > Also, keep another variable that accumulate all bits set and return > its value so you don't have to re-check the mask in the caller. > > cpumask operations can be expensive. > You're right. That's more efficient. >> + } >> + >> + return; > > You don't need a return; at the end of a function. > Ok. >> +} >> + >> +/* 6 64-bit registers unpacked into 12 32-bit associativity values */ >> +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) >> + >> +/* >> + * Convert the associativity domain numbers returned from the hypervisor >> + * to the sequence they would appear in the ibm,associativity property. >> + */ >> +static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) >> +{ >> + int i = 0; >> + int nr_assoc_doms = 0; >> + const u16 *field = (const u16*) packed; >> + >> +#define VPHN_FIELD_UNUSED (0xffff) >> +#define VPHN_FIELD_MSB (0x8000) >> +#define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) >> + >> + for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { >> + if (*field == VPHN_FIELD_UNUSED) { >> + /* All significant fields processed, and remaining >> + * fields contain the reserved value of all 1's. >> + * Just store them. >> + */ >> + unpacked[i] = *((u32*)field); >> + field += 2; >> + } >> + else if (*field & VPHN_FIELD_MSB) { >> + /* Data is in the lower 15 bits of this field */ >> + unpacked[i] = *field & VPHN_FIELD_MASK; >> + field++; >> + nr_assoc_doms++; >> + } >> + else { >> + /* Data is in the lower 15 bits of this field >> + * concatenated with the next 16 bit field >> + */ >> + unpacked[i] = *((u32*)field); >> + field += 2; >> + nr_assoc_doms++; >> + } >> + } >> + >> + return nr_assoc_doms; >> +} >> + >> +/* >> + * Retrieve the new associativity information for a virtual processor's >> + * home node. >> + */ >> +static long hcall_vphn(unsigned long cpu, unsigned int *associativity) >> +{ >> + long rc = 0; >> + long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; >> + u64 flags = 1; >> + int hwcpu = get_hard_smp_processor_id(cpu); >> + >> + rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu); >> + vphn_unpack_associativity(retbuf, associativity); >> + >> + return rc; >> +} >> + >> +static long >> +vphn_get_associativity(unsigned long cpu, unsigned int *associativity) >> +{ > > Nowadays, we prefer keeping the "static long" and the function name on > the same line. If you really want to avoid >80 col (I don't care myself > much as long as you stick below 100) then move the second argument down > one line. > Ok. I wasn't sure which way was preferred. :P >> + long rc = 0; >> + >> + rc = hcall_vphn(cpu, associativity); >> + >> + switch (rc) { >> + case H_FUNCTION: >> + printk(KERN_INFO >> + "VPHN is not supported. Disabling polling...\n"); >> + stop_topology_update(); >> + break; >> + case H_HARDWARE: >> + printk(KERN_ERR >> + "hcall_vphn() experienced a hardware fault " >> + "preventing VPHN. Disabling polling...\n"); >> + stop_topology_update(); >> + } >> + >> + return rc; >> +} >> + >> +/* >> + * Update the node maps and sysfs entries for each cpu whose home node >> + * has changed. >> + */ >> +int arch_update_cpu_topology(void) >> +{ >> + int cpu = 0, nid = 0, old_nid = 0; >> + unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; >> + struct sys_device *sysdev = NULL; >> + >> + for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { >> + vphn_get_associativity(cpu, associativity); >> + nid = associativity_to_nid(associativity); >> + >> + if (nid < 0 || !node_online(nid)) >> + nid = first_online_node; >> + >> + old_nid = numa_cpu_lookup_table[cpu]; >> + >> + /* Disable hotplug while we update the cpu >> + * masks and sysfs. >> + */ >> + get_online_cpus(); >> + unregister_cpu_under_node(cpu, old_nid); >> + unmap_cpu_from_node(cpu); >> + map_cpu_to_node(cpu, nid); >> + register_cpu_under_node(cpu, nid); >> + put_online_cpus(); >> + >> + sysdev = get_cpu_sysdev(cpu); >> + if (sysdev) >> + kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); >> + } >> + >> + return 1; >> +} > > That looks terribly expensive. Might be worth considering adding a way > to sysfs to "mv" an object around in the future. > That's a good idea. I'll look into it once we get VPHN finalized. >> +static void topology_work_fn(struct work_struct *work) >> +{ >> + rebuild_sched_domains(); >> +} >> + >> +void topology_schedule_update(void) >> +{ >> + schedule_work(&topology_work); >> +} >> + >> +static void topology_timer_fn(unsigned long ignored) >> +{ >> + update_cpu_associativity_changes_mask(); >> + if (!cpumask_empty(&cpu_associativity_changes_mask)) >> + topology_schedule_update(); >> + set_topology_timer(); >> +} > > I wonder if we really need that cpumask and timer overall. We might be > better off just having a per-cpu copy of the counters and check them in > the timer interrupt, it's low enough overhead don't you think ? > Hmmm... Good point. That would eliminate a lot of complexity, and if we wrap the code in the timer interrupt so that it only executes on systems with the VPHN feature, then partition migration pretty much takes care of itself as well. :) I'll repost this patch set with the tweaks that you mentioned above, then I'll post a separate patch to remove the cpumask and timer. >> +static void set_topology_timer(void) >> +{ >> + topology_timer.data = 0; >> + topology_timer.expires = jiffies + 60 * HZ; >> + add_timer(&topology_timer); >> +} >> + >> +/* >> + * Start polling for VPHN associativity changes. >> + */ >> +int start_topology_update(void) >> +{ >> + int rc = 0; >> + >> + if (firmware_has_feature(FW_FEATURE_VPHN)) { >> + setup_cpu_associativity_change_counters(); >> + init_timer_deferrable(&topology_timer); >> + set_topology_timer(); >> + rc = 1; >> + } >> + >> + return rc; >> +} >> +__initcall(start_topology_update); >> + >> +/* >> + * Disable polling for VPHN associativity changes. >> + */ >> +int stop_topology_update(void) >> +{ >> + return del_timer(&topology_timer); >> +} > > del_timer_sync() ? > Ah, good catch! I think the proper way to do this is to use del_timer_sync() and add a "shutting down" flag to the timer function to ensure that it doesn't reschedule itself. > Cheers, > Ben. >
On Wed, 2010-12-01 at 16:50 -0500, Jesse Larrew wrote: > > Hmmm... Good point. That would eliminate a lot of complexity, and if > we wrap the code in the timer interrupt so that it only executes on > systems with the VPHN feature, then partition migration pretty much > takes care of itself as well. :) I'll repost this patch set with the > tweaks that you mentioned above, then I'll post a separate patch to > remove the cpumask and timer. Right. First fixup that patch and we can merge that, then we can look at the "better approach" as a separate step. Cheers, Ben.
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 7f5e0fe..380d48b 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -62,7 +62,10 @@ struct lppaca { volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 u32 dsei_data; // DSEI data x24-x27 u64 sprg3; // SPRG3 value x28-x2F - u8 reserved3[80]; // Reserved x30-x7F + u8 reserved3[40]; // Reserved x30-x57 + volatile u8 vphn_assoc_counts[8]; // Virtual processor home node + // associativity change counters x58-x5F + u8 reserved4[32]; // Reserved x60-x7F //============================================================================= // CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 74505b2..db6308c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -20,10 +20,14 @@ #include <linux/memblock.h> #include <linux/of.h> #include <linux/pfn.h> +#include <linux/cpuset.h> +#include <linux/node.h> #include <asm/sparsemem.h> #include <asm/prom.h> #include <asm/system.h> #include <asm/smp.h> +#include <asm/firmware.h> +#include <asm/paca.h> static int numa_enabled = 1; @@ -246,32 +250,41 @@ static void initialize_distance_lookup_table(int nid, /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ -static int of_node_to_nid_single(struct device_node *device) +static int associativity_to_nid(const unsigned int *associativity) { int nid = -1; - const unsigned int *tmp; if (min_common_depth == -1) goto out; - tmp = of_get_associativity(device); - if (!tmp) - goto out; - - if (tmp[0] >= min_common_depth) - nid = tmp[min_common_depth]; + if (associativity[0] >= min_common_depth) + nid = associativity[min_common_depth]; /* POWER4 LPAR uses 0xffff as invalid node */ if (nid == 0xffff || nid >= MAX_NUMNODES) nid = -1; - if (nid > 0 && tmp[0] >= distance_ref_points_depth) - initialize_distance_lookup_table(nid, tmp); + if (nid > 0 && associativity[0] >= distance_ref_points_depth) + initialize_distance_lookup_table(nid, associativity); out: return nid; } +/* Returns the nid associated with the given device tree node, + * or -1 if not found. + */ +static int of_node_to_nid_single(struct device_node *device) +{ + int nid = -1; + const unsigned int *tmp; + + tmp = of_get_associativity(device); + if (tmp) + nid = associativity_to_nid(tmp); + return nid; +} + /* Walk the device tree upwards, looking for an associativity id */ int of_node_to_nid(struct device_node *device) { @@ -1248,3 +1261,244 @@ int hot_add_scn_to_nid(unsigned long scn_addr) } #endif /* CONFIG_MEMORY_HOTPLUG */ + +/* Vrtual Processor Home Node (VPHN) support */ +#define VPHN_NR_CHANGE_CTRS (8) +static u8 vphn_cpu_change_counts[NR_CPUS][VPHN_NR_CHANGE_CTRS]; +static cpumask_t cpu_associativity_changes_mask; +static void topology_work_fn(struct work_struct *work); +static DECLARE_WORK(topology_work, topology_work_fn); +static void topology_timer_fn(unsigned long ignored); +static struct timer_list topology_timer = + TIMER_INITIALIZER(topology_timer_fn, 0, 0); + +static void set_topology_timer(void); +int stop_topology_update(void); + +/* + * Store the current values of the associativity change counters in the + * hypervisor. + */ +static void setup_cpu_associativity_change_counters(void) +{ + int cpu = 0; + + for_each_possible_cpu(cpu) { + int i = 0; + u8 *counts = vphn_cpu_change_counts[cpu]; + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; + + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + counts[i] = hypervisor_counts[i]; + } + } + + return; +} + +/* + * The hypervisor maintains a set of 8 associativity change counters in + * the VPA of each cpu that correspond to the associativity levels in the + * ibm,associativity-reference-points property. When an associativity + * level changes, the corresponding counter is incremented. + * + * Set a bit in cpu_associativity_changes_mask for each cpu whose home + * node associativity levels have changed. + */ +static void update_cpu_associativity_changes_mask(void) +{ + int cpu = 0; + cpumask_t *changes = &cpu_associativity_changes_mask; + + cpumask_clear(changes); + + for_each_possible_cpu(cpu) { + int i; + u8 *counts = vphn_cpu_change_counts[cpu]; + volatile u8 *hypervisor_counts = lppaca[cpu].vphn_assoc_counts; + + for (i = 0; i < VPHN_NR_CHANGE_CTRS; i++) { + if (hypervisor_counts[i] > counts[i]) { + counts[i] = hypervisor_counts[i]; + + if (!(cpumask_test_cpu(cpu, changes))) + cpumask_set_cpu(cpu, changes); + } + } + } + + return; +} + +/* 6 64-bit registers unpacked into 12 32-bit associativity values */ +#define VPHN_ASSOC_BUFSIZE (6*sizeof(u64)/sizeof(u32)) + +/* + * Convert the associativity domain numbers returned from the hypervisor + * to the sequence they would appear in the ibm,associativity property. + */ +static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked) +{ + int i = 0; + int nr_assoc_doms = 0; + const u16 *field = (const u16*) packed; + +#define VPHN_FIELD_UNUSED (0xffff) +#define VPHN_FIELD_MSB (0x8000) +#define VPHN_FIELD_MASK (~VPHN_FIELD_MSB) + + for (i = 0; i < VPHN_ASSOC_BUFSIZE; i++) { + if (*field == VPHN_FIELD_UNUSED) { + /* All significant fields processed, and remaining + * fields contain the reserved value of all 1's. + * Just store them. + */ + unpacked[i] = *((u32*)field); + field += 2; + } + else if (*field & VPHN_FIELD_MSB) { + /* Data is in the lower 15 bits of this field */ + unpacked[i] = *field & VPHN_FIELD_MASK; + field++; + nr_assoc_doms++; + } + else { + /* Data is in the lower 15 bits of this field + * concatenated with the next 16 bit field + */ + unpacked[i] = *((u32*)field); + field += 2; + nr_assoc_doms++; + } + } + + return nr_assoc_doms; +} + +/* + * Retrieve the new associativity information for a virtual processor's + * home node. + */ +static long hcall_vphn(unsigned long cpu, unsigned int *associativity) +{ + long rc = 0; + long retbuf[PLPAR_HCALL9_BUFSIZE] = {0}; + u64 flags = 1; + int hwcpu = get_hard_smp_processor_id(cpu); + + rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu); + vphn_unpack_associativity(retbuf, associativity); + + return rc; +} + +static long +vphn_get_associativity(unsigned long cpu, unsigned int *associativity) +{ + long rc = 0; + + rc = hcall_vphn(cpu, associativity); + + switch (rc) { + case H_FUNCTION: + printk(KERN_INFO + "VPHN is not supported. Disabling polling...\n"); + stop_topology_update(); + break; + case H_HARDWARE: + printk(KERN_ERR + "hcall_vphn() experienced a hardware fault " + "preventing VPHN. Disabling polling...\n"); + stop_topology_update(); + } + + return rc; +} + +/* + * Update the node maps and sysfs entries for each cpu whose home node + * has changed. + */ +int arch_update_cpu_topology(void) +{ + int cpu = 0, nid = 0, old_nid = 0; + unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; + struct sys_device *sysdev = NULL; + + for_each_cpu_mask(cpu, cpu_associativity_changes_mask) { + vphn_get_associativity(cpu, associativity); + nid = associativity_to_nid(associativity); + + if (nid < 0 || !node_online(nid)) + nid = first_online_node; + + old_nid = numa_cpu_lookup_table[cpu]; + + /* Disable hotplug while we update the cpu + * masks and sysfs. + */ + get_online_cpus(); + unregister_cpu_under_node(cpu, old_nid); + unmap_cpu_from_node(cpu); + map_cpu_to_node(cpu, nid); + register_cpu_under_node(cpu, nid); + put_online_cpus(); + + sysdev = get_cpu_sysdev(cpu); + if (sysdev) + kobject_uevent(&sysdev->kobj, KOBJ_CHANGE); + } + + return 1; +} + +static void topology_work_fn(struct work_struct *work) +{ + rebuild_sched_domains(); +} + +void topology_schedule_update(void) +{ + schedule_work(&topology_work); +} + +static void topology_timer_fn(unsigned long ignored) +{ + update_cpu_associativity_changes_mask(); + if (!cpumask_empty(&cpu_associativity_changes_mask)) + topology_schedule_update(); + set_topology_timer(); +} + +static void set_topology_timer(void) +{ + topology_timer.data = 0; + topology_timer.expires = jiffies + 60 * HZ; + add_timer(&topology_timer); +} + +/* + * Start polling for VPHN associativity changes. + */ +int start_topology_update(void) +{ + int rc = 0; + + if (firmware_has_feature(FW_FEATURE_VPHN)) { + setup_cpu_associativity_change_counters(); + init_timer_deferrable(&topology_timer); + set_topology_timer(); + rc = 1; + } + + return rc; +} +__initcall(start_topology_update); + +/* + * Disable polling for VPHN associativity changes. + */ +int stop_topology_update(void) +{ + return del_timer(&topology_timer); +}