| Message ID | 1502640203-15577-3-git-send-email-zuban32s@gmail.com |
|---|---|
| State | New |
| Headers | show |
On 13/08/2017 19:03, Aleksandr Bezzubikov wrote: > On PCI init PCI bridge devices may need some > extra info about bus number to reserve, IO, memory and > prefetchable memory limits. QEMU can provide this > with special vendor-specific PCI capability. > > This capability is intended to be used only > for Red Hat PCI bridges, i.e. QEMU cooperation. > Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Thanks, Marcel > Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> > --- > src/fw/dev-pci.h | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 src/fw/dev-pci.h > > diff --git a/src/fw/dev-pci.h b/src/fw/dev-pci.h > new file mode 100644 > index 0000000..0dc5556 > --- /dev/null > +++ b/src/fw/dev-pci.h > @@ -0,0 +1,53 @@ > +#ifndef _PCI_CAP_H > +#define _PCI_CAP_H > + > +#include "types.h" > + > +/* > + * > + * QEMU-specific vendor(Red Hat)-specific capability. > + * It's intended to provide some hints for firmware to init PCI devices. > + * > + * Its structure is shown below: > + * > + * Header: > + * > + * u8 id; Standard PCI Capability Header field > + * u8 next; Standard PCI Capability Header field > + * u8 len; Standard PCI Capability Header field > + * u8 type; Red Hat vendor-specific capability type > + * Data: > + * > + * u32 bus_res; minimum bus number to reserve; > + * this is necessary for PCI Express Root Ports > + * to support PCI bridges hotplug > + * u64 io; IO space to reserve > + * u32 mem; non-prefetchable memory to reserve > + * > + * At most of the following two fields may be set to a value > + * different from 0xFF...F: > + * u32 prefetchable_mem_32; prefetchable memory to reserve (32-bit MMIO) > + * u64 prefetchable_mem_64; prefetchable memory to reserve (64-bit MMIO) > + * > + * If any field value in Data section is 0xFF...F, > + * it means that such kind of reservation is not needed and must be ignored. > + * > +*/ > + > +/* Offset of vendor-specific capability type field */ > +#define PCI_CAP_REDHAT_TYPE_OFFSET 3 > + > +/* List of valid Red Hat vendor-specific capability types */ > +#define REDHAT_CAP_RESOURCE_RESERVE 1 > + > + > +/* Offsets of RESOURCE_RESERVE capability fields */ > +#define RES_RESERVE_BUS_RES 4 > +#define RES_RESERVE_IO 8 > +#define RES_RESERVE_MEM 16 > +#define RES_RESERVE_PREF_MEM_32 20 > +#define RES_RESERVE_PREF_MEM_64 24 > +#define RES_RESERVE_CAP_SIZE 32 > + > +#endif /* _PCI_CAP_H */ > + >
diff --git a/src/fw/dev-pci.h b/src/fw/dev-pci.h new file mode 100644 index 0000000..0dc5556 --- /dev/null +++ b/src/fw/dev-pci.h @@ -0,0 +1,53 @@ +#ifndef _PCI_CAP_H +#define _PCI_CAP_H + +#include "types.h" + +/* + * + * QEMU-specific vendor(Red Hat)-specific capability. + * It's intended to provide some hints for firmware to init PCI devices. + * + * Its structure is shown below: + * + * Header: + * + * u8 id; Standard PCI Capability Header field + * u8 next; Standard PCI Capability Header field + * u8 len; Standard PCI Capability Header field + * u8 type; Red Hat vendor-specific capability type + * Data: + * + * u32 bus_res; minimum bus number to reserve; + * this is necessary for PCI Express Root Ports + * to support PCI bridges hotplug + * u64 io; IO space to reserve + * u32 mem; non-prefetchable memory to reserve + * + * At most of the following two fields may be set to a value + * different from 0xFF...F: + * u32 prefetchable_mem_32; prefetchable memory to reserve (32-bit MMIO) + * u64 prefetchable_mem_64; prefetchable memory to reserve (64-bit MMIO) + * + * If any field value in Data section is 0xFF...F, + * it means that such kind of reservation is not needed and must be ignored. + * +*/ + +/* Offset of vendor-specific capability type field */ +#define PCI_CAP_REDHAT_TYPE_OFFSET 3 + +/* List of valid Red Hat vendor-specific capability types */ +#define REDHAT_CAP_RESOURCE_RESERVE 1 + + +/* Offsets of RESOURCE_RESERVE capability fields */ +#define RES_RESERVE_BUS_RES 4 +#define RES_RESERVE_IO 8 +#define RES_RESERVE_MEM 16 +#define RES_RESERVE_PREF_MEM_32 20 +#define RES_RESERVE_PREF_MEM_64 24 +#define RES_RESERVE_CAP_SIZE 32 + +#endif /* _PCI_CAP_H */ +
On PCI init PCI bridge devices may need some extra info about bus number to reserve, IO, memory and prefetchable memory limits. QEMU can provide this with special vendor-specific PCI capability. This capability is intended to be used only for Red Hat PCI bridges, i.e. QEMU cooperation. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> --- src/fw/dev-pci.h | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 src/fw/dev-pci.h