diff mbox

[linux,dev-4.10,v2,2/4] hwmon: (pmbus): Access word data for STATUS_WORD

Message ID 1502474608-2674-3-git-send-email-eajames@linux.vnet.ibm.com
State Accepted, archived
Headers show

Commit Message

Eddie James Aug. 11, 2017, 6:03 p.m. UTC 
From: "Edward A. James" <eajames@us.ibm.com>

Pmbus always reads byte data from the status register, even if
configured to use STATUS_WORD. Use a function pointer to read the
correct amount of data from the registers.
Also switch to try STATUS_WORD first before STATUS_BYTE on init.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 drivers/hwmon/pmbus/pmbus_core.c | 54 +++++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 14 deletions(-)

Comments

Joel Stanley Aug. 14, 2017, 4:32 a.m. UTC | #1 
On Sat, Aug 12, 2017 at 3:33 AM, Eddie James <eajames@linux.vnet.ibm.com> wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Pmbus always reads byte data from the status register, even if
> configured to use STATUS_WORD. Use a function pointer to read the
> correct amount of data from the registers.
> Also switch to try STATUS_WORD first before STATUS_BYTE on init.
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>

I have merged the upstream commit
(cbcdec6202c934bd72fca4fe9db255d84f907dbe) into dev-4.10.

Cheers,

Joel
diff mbox

Patch

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 06924b3..306abdc 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -114,7 +114,8 @@  struct pmbus_data {
 	 * so we keep them all together.
 	 */
 	u16 status[PB_NUM_STATUS_REG];
-	u8 status_register;
+
+	int (*read_status)(struct i2c_client *client, int page);
 
 	u8 currpage;
 };
@@ -460,7 +461,7 @@  static int pmbus_check_status_cml(struct i2c_client *client)
 	struct pmbus_data *data = i2c_get_clientdata(client);
 	int status, status2;
 
-	status = _pmbus_read_byte_data(client, -1, data->status_register);
+	status = data->read_status(client, -1);
 	if (status < 0 || (status & PB_STATUS_CML)) {
 		status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
 		if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
@@ -484,6 +485,23 @@  static bool pmbus_check_register(struct i2c_client *client,
 	return rv >= 0;
 }
 
+static bool pmbus_check_status_register(struct i2c_client *client, int page)
+{
+	int status;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	status = data->read_status(client, page);
+	if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) &&
+	    (status & PB_STATUS_CML)) {
+		status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+		if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND))
+			status = -EIO;
+	}
+
+	pmbus_clear_fault_page(client, -1);
+	return status >= 0;
+}
+
 bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
 {
 	return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
@@ -530,8 +548,7 @@  static struct pmbus_data *pmbus_update_device(struct device *dev)
 
 		for (i = 0; i < info->pages; i++) {
 			data->status[PB_STATUS_BASE + i]
-			    = _pmbus_read_byte_data(client, i,
-						    data->status_register);
+			    = data->read_status(client, i);
 			for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) {
 				struct _pmbus_status *s = &pmbus_status[j];
 
@@ -1199,8 +1216,7 @@  static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
 		 * the generic status register for this page is accessible.
 		 */
 		if (!ret && attr->gbit &&
-		    pmbus_check_byte_register(client, page,
-					      data->status_register)) {
+		    pmbus_check_status_register(client, page)) {
 			ret = pmbus_add_boolean(data, name, "alarm", index,
 						NULL, NULL,
 						PB_STATUS_BASE + page,
@@ -1921,6 +1937,16 @@  static int pmbus_identify_common(struct i2c_client *client,
 	return 0;
 }
 
+static int pmbus_read_status_byte(struct i2c_client *client, int page)
+{
+	return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+}
+
+static int pmbus_read_status_word(struct i2c_client *client, int page)
+{
+	return _pmbus_read_word_data(client, page, PMBUS_STATUS_WORD);
+}
+
 static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 			     struct pmbus_driver_info *info)
 {
@@ -1928,16 +1954,16 @@  static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 	int page, ret;
 
 	/*
-	 * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try
-	 * to use PMBUS_STATUS_WORD instead if that is the case.
+	 * Some PMBus chips don't support PMBUS_STATUS_WORD, so try
+	 * to use PMBUS_STATUS_BYTE instead if that is the case.
 	 * Bail out if both registers are not supported.
 	 */
-	data->status_register = PMBUS_STATUS_BYTE;
-	ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
-	if (ret < 0 || ret == 0xff) {
-		data->status_register = PMBUS_STATUS_WORD;
-		ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
-		if (ret < 0 || ret == 0xffff) {
+	data->read_status = pmbus_read_status_word;
+	ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
+	if (ret < 0 || ret == 0xffff) {
+		data->read_status = pmbus_read_status_byte;
+		ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
+		if (ret < 0 || ret == 0xff) {
 			dev_err(dev, "PMBus status register not found\n");
 			return -ENODEV;
 		}