| Message ID | 20170803085044.55456-1-c_mykolak@mellanox.com |
|---|---|
| State | Accepted, archived |
| Headers | show |
On Thu, Aug 03, 2017 at 11:50:44AM +0300, Mykola Kostenok wrote: > Add support in aspeed-pwm-tacho driver for cooling device creation. > This cooling device could be bound to a thermal zone > for the thermal control. Device will appear in /sys/class/thermal > folder as cooling_deviceX. Then it could be bound to particular > thermal zones. Allow specification of the cooling levels > vector - PWM duty cycle values in a range from 0 to 255 > which correspond to thermal cooling states. > > Signed-off-by: Mykola Kostenok <c_mykolak@mellanox.com> > Reviewed-by: Joel Stanley <joel@jms.id.au> Applied to hwmon-next. Thanks, Guenter > --- > v5 -> v6: > Pointed out by Andrew Jeffery: > - remove unnecessary of_node_put() after loop. > > v4 -> v5: > Pointed out by Joel Stanley: > - Use snprintf to fill cdev->name[16]. > > v3 -> v4: > Pointed out by Joel Stanley: > - Move patch history after Signoff. > - Remove unnecessary type cast. > - Use array instead of pointers for colling_levels. > - Rename num_level to num_levels. > - Use local variable to make function easier to read. > - Drop unnecessary sizeof(u8). > - Use IS_ERR instead of PTR_ERR_OR_ZERO. > > v2 -> v3: > Pointed out by Rob Herring: > - Put cooling-levels under fan subnodes. > > v1 -> v2: > - Remove device tree binding file from the patch. > - Move of_node_put out of cycle because of_get_next_child > already do of_put_node on previous child. > --- > drivers/hwmon/aspeed-pwm-tacho.c | 116 ++++++++++++++++++++++++++++++++++++++- > 1 file changed, 114 insertions(+), 2 deletions(-) > > diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c > index ddfe66b..69b97d4 100644 > --- a/drivers/hwmon/aspeed-pwm-tacho.c > +++ b/drivers/hwmon/aspeed-pwm-tacho.c > @@ -20,6 +20,7 @@ > #include <linux/platform_device.h> > #include <linux/sysfs.h> > #include <linux/regmap.h> > +#include <linux/thermal.h> > > /* ASPEED PWM & FAN Tach Register Definition */ > #define ASPEED_PTCR_CTRL 0x00 > @@ -166,6 +167,18 @@ > /* How long we sleep in us while waiting for an RPM result. */ > #define ASPEED_RPM_STATUS_SLEEP_USEC 500 > > +#define MAX_CDEV_NAME_LEN 16 > + > +struct aspeed_cooling_device { > + char name[16]; > + struct aspeed_pwm_tacho_data *priv; > + struct thermal_cooling_device *tcdev; > + int pwm_port; > + u8 *cooling_levels; > + u8 max_state; > + u8 cur_state; > +}; > + > struct aspeed_pwm_tacho_data { > struct regmap *regmap; > unsigned long clk_freq; > @@ -180,6 +193,7 @@ struct aspeed_pwm_tacho_data { > u8 pwm_port_type[8]; > u8 pwm_port_fan_ctrl[8]; > u8 fan_tach_ch_source[16]; > + struct aspeed_cooling_device *cdev[8]; > const struct attribute_group *groups[3]; > }; > > @@ -765,6 +779,94 @@ static void aspeed_create_fan_tach_channel(struct aspeed_pwm_tacho_data *priv, > } > } > > +static int > +aspeed_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev, > + unsigned long *state) > +{ > + struct aspeed_cooling_device *cdev = tcdev->devdata; > + > + *state = cdev->max_state; > + > + return 0; > +} > + > +static int > +aspeed_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev, > + unsigned long *state) > +{ > + struct aspeed_cooling_device *cdev = tcdev->devdata; > + > + *state = cdev->cur_state; > + > + return 0; > +} > + > +static int > +aspeed_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev, > + unsigned long state) > +{ > + struct aspeed_cooling_device *cdev = tcdev->devdata; > + > + if (state > cdev->max_state) > + return -EINVAL; > + > + cdev->cur_state = state; > + cdev->priv->pwm_port_fan_ctrl[cdev->pwm_port] = > + cdev->cooling_levels[cdev->cur_state]; > + aspeed_set_pwm_port_fan_ctrl(cdev->priv, cdev->pwm_port, > + cdev->cooling_levels[cdev->cur_state]); > + > + return 0; > +} > + > +static const struct thermal_cooling_device_ops aspeed_pwm_cool_ops = { > + .get_max_state = aspeed_pwm_cz_get_max_state, > + .get_cur_state = aspeed_pwm_cz_get_cur_state, > + .set_cur_state = aspeed_pwm_cz_set_cur_state, > +}; > + > +static int aspeed_create_pwm_cooling(struct device *dev, > + struct device_node *child, > + struct aspeed_pwm_tacho_data *priv, > + u32 pwm_port, u8 num_levels) > +{ > + int ret; > + struct aspeed_cooling_device *cdev; > + > + cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); > + > + if (!cdev) > + return -ENOMEM; > + > + cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL); > + if (!cdev->cooling_levels) > + return -ENOMEM; > + > + cdev->max_state = num_levels - 1; > + ret = of_property_read_u8_array(child, "cooling-levels", > + cdev->cooling_levels, > + num_levels); > + if (ret) { > + dev_err(dev, "Property 'cooling-levels' cannot be read.\n"); > + return ret; > + } > + snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%s%d", child->name, pwm_port); > + > + cdev->tcdev = thermal_of_cooling_device_register(child, > + cdev->name, > + cdev, > + &aspeed_pwm_cool_ops); > + if (IS_ERR(cdev->tcdev)) > + return PTR_ERR(cdev->tcdev); > + > + cdev->priv = priv; > + cdev->pwm_port = pwm_port; > + > + priv->cdev[pwm_port] = cdev; > + > + return 0; > +} > + > static int aspeed_create_fan(struct device *dev, > struct device_node *child, > struct aspeed_pwm_tacho_data *priv) > @@ -778,6 +880,15 @@ static int aspeed_create_fan(struct device *dev, > return ret; > aspeed_create_pwm_port(priv, (u8)pwm_port); > > + ret = of_property_count_u8_elems(child, "cooling-levels"); > + > + if (ret > 0) { > + ret = aspeed_create_pwm_cooling(dev, child, priv, pwm_port, > + ret); > + if (ret) > + return ret; > + } > + > count = of_property_count_u8_elems(child, "aspeed,fan-tach-ch"); > if (count < 1) > return -EINVAL; > @@ -834,9 +945,10 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev) > > for_each_child_of_node(np, child) { > ret = aspeed_create_fan(dev, child, priv); > - of_node_put(child); > - if (ret) > + if (ret) { > + of_node_put(child); > return ret; > + } > } > > priv->groups[0] = &pwm_dev_group;
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c index ddfe66b..69b97d4 100644 --- a/drivers/hwmon/aspeed-pwm-tacho.c +++ b/drivers/hwmon/aspeed-pwm-tacho.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/sysfs.h> #include <linux/regmap.h> +#include <linux/thermal.h> /* ASPEED PWM & FAN Tach Register Definition */ #define ASPEED_PTCR_CTRL 0x00 @@ -166,6 +167,18 @@ /* How long we sleep in us while waiting for an RPM result. */ #define ASPEED_RPM_STATUS_SLEEP_USEC 500 +#define MAX_CDEV_NAME_LEN 16 + +struct aspeed_cooling_device { + char name[16]; + struct aspeed_pwm_tacho_data *priv; + struct thermal_cooling_device *tcdev; + int pwm_port; + u8 *cooling_levels; + u8 max_state; + u8 cur_state; +}; + struct aspeed_pwm_tacho_data { struct regmap *regmap; unsigned long clk_freq; @@ -180,6 +193,7 @@ struct aspeed_pwm_tacho_data { u8 pwm_port_type[8]; u8 pwm_port_fan_ctrl[8]; u8 fan_tach_ch_source[16]; + struct aspeed_cooling_device *cdev[8]; const struct attribute_group *groups[3]; }; @@ -765,6 +779,94 @@ static void aspeed_create_fan_tach_channel(struct aspeed_pwm_tacho_data *priv, } } +static int +aspeed_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev, + unsigned long *state) +{ + struct aspeed_cooling_device *cdev = tcdev->devdata; + + *state = cdev->max_state; + + return 0; +} + +static int +aspeed_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev, + unsigned long *state) +{ + struct aspeed_cooling_device *cdev = tcdev->devdata; + + *state = cdev->cur_state; + + return 0; +} + +static int +aspeed_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev, + unsigned long state) +{ + struct aspeed_cooling_device *cdev = tcdev->devdata; + + if (state > cdev->max_state) + return -EINVAL; + + cdev->cur_state = state; + cdev->priv->pwm_port_fan_ctrl[cdev->pwm_port] = + cdev->cooling_levels[cdev->cur_state]; + aspeed_set_pwm_port_fan_ctrl(cdev->priv, cdev->pwm_port, + cdev->cooling_levels[cdev->cur_state]); + + return 0; +} + +static const struct thermal_cooling_device_ops aspeed_pwm_cool_ops = { + .get_max_state = aspeed_pwm_cz_get_max_state, + .get_cur_state = aspeed_pwm_cz_get_cur_state, + .set_cur_state = aspeed_pwm_cz_set_cur_state, +}; + +static int aspeed_create_pwm_cooling(struct device *dev, + struct device_node *child, + struct aspeed_pwm_tacho_data *priv, + u32 pwm_port, u8 num_levels) +{ + int ret; + struct aspeed_cooling_device *cdev; + + cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); + + if (!cdev) + return -ENOMEM; + + cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL); + if (!cdev->cooling_levels) + return -ENOMEM; + + cdev->max_state = num_levels - 1; + ret = of_property_read_u8_array(child, "cooling-levels", + cdev->cooling_levels, + num_levels); + if (ret) { + dev_err(dev, "Property 'cooling-levels' cannot be read.\n"); + return ret; + } + snprintf(cdev->name, MAX_CDEV_NAME_LEN, "%s%d", child->name, pwm_port); + + cdev->tcdev = thermal_of_cooling_device_register(child, + cdev->name, + cdev, + &aspeed_pwm_cool_ops); + if (IS_ERR(cdev->tcdev)) + return PTR_ERR(cdev->tcdev); + + cdev->priv = priv; + cdev->pwm_port = pwm_port; + + priv->cdev[pwm_port] = cdev; + + return 0; +} + static int aspeed_create_fan(struct device *dev, struct device_node *child, struct aspeed_pwm_tacho_data *priv) @@ -778,6 +880,15 @@ static int aspeed_create_fan(struct device *dev, return ret; aspeed_create_pwm_port(priv, (u8)pwm_port); + ret = of_property_count_u8_elems(child, "cooling-levels"); + + if (ret > 0) { + ret = aspeed_create_pwm_cooling(dev, child, priv, pwm_port, + ret); + if (ret) + return ret; + } + count = of_property_count_u8_elems(child, "aspeed,fan-tach-ch"); if (count < 1) return -EINVAL; @@ -834,9 +945,10 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev) for_each_child_of_node(np, child) { ret = aspeed_create_fan(dev, child, priv); - of_node_put(child); - if (ret) + if (ret) { + of_node_put(child); return ret; + } } priv->groups[0] = &pwm_dev_group;