diff mbox

[rs6000] More diagnostic cleanup, addressing PR79845

Message ID e6da7858-91d3-8b4b-8686-b6591dbd902f@linux.vnet.ibm.com
State New
Headers show

Commit Message

Bill Schmidt Aug. 10, 2017, 9:28 p.m. UTC 
Hi,

This continues the cleanup of diagnostic messages in the rs6000 back end.  The
primary focus is to make sure that we use quoted strings with %qs, %<, %> as
appropriate, and that option strings are separated from translatable strings
to make things easier on the internationalization folks, as requested in
PR79845.  While working on this, I noticed a couple of places where the
diagnostic strings result in excessively long lines, and cleaned these up as
well.

One peculiarity I noticed, but did not attempt to address, is that a small
handful of diagnostic strings are tagged with _N ().  There doesn't seem to
be any rhyme or reason to this.  I expect it's a result of copy/paste from
somewhere and most of these strings should be translated.  But that's for
another day (and probably another person).

Bootstrapped and tested on powerpc64le-linux-gnu (POWER8 64-bit) and on
powerpc64-linux-gnu (POWER7 32- and 64-bit) with no regressions.  Is this
okay for trunk?

Thanks,
Bill


[gcc]

2017-08-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	PR target/79845
	* config/rs6000/linux64.h (INVALID_64BIT): Use quoted strings.
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	Likewise.
	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Use
	quoted strings, and make more translator-friendly.
	(darwin_rs6000_override_options): Likewise.
	(rs6000_option_override_internal): Likewise.
	(rs6000_return_in_memory): Fix overlong line.
	(init_cmulative_args): Use quoted strings, and make more
	translator-friendly.
	(rs6000_pass_by_reference): Fix overlong line.
	(def_builtin): Use quoted strings.
	(altivec_expand_predicate_builtin): Use quoted strings, and make
	more translator-friendly.
	(htm_expand_builtin): Use quoted strings.
	(cpu_expand_builtin): Use quoted strings, and make more
	translator-friendly.
	(altivec_expand_builtin): Likewise.
	(paired_expand_predicate_builtin): Likewise.
	(rs6000_invalid_builtin): Likewise.
	(builtin_function_type): Use quoted strings.
	(rs6000_expand_split_stack_prologue): Use quoted strings, and make
	more translator-friendly.
	(rs6000_trampoline_init): Likewise.
	(rs6000_handle_altivec_attribute): Likewise.
	(rs6000_inner_target_options): Use quoted strings.
	(rs6000_disable_incompatible_switches): Likewise.
	* config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Use quoted
	strings, and make more translator-friendly.
	(SUBSUBTARGET_OVERRIDE_OPTIONS): Use quoted strings.

[gcc/testsuite]

2017-08-10  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

	PR target/79845
	* g++.dg/ext/altivec-cell-5.C: Adjust diagnostic strings.
	* gcc.target/powerpc/altivec-cell-5.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-cmp-exp-eq-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-cmp-exp-gt-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-cmp-exp-lt-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-cmp-exp-unordered-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-exp-1.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-exp-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-exp-4.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-exp-5.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-sig-1.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-sig-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-sig-4.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-extract-sig-5.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-1.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-10.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-11.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-4.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-5.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-7.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-insert-exp-8.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-data-class-11.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-data-class-6.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-data-class-7.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-neg-2.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-neg-3.c: Likewise.
	* gcc.target/powerpc/bfp/scalar-test-neg-5.c: Likewise.
	* gcc.target/powerpc/bfp/vec-extract-exp-2.c: Likewise.
	* gcc.target/powerpc/bfp/vec-extract-exp-3.c: Likewise.
	* gcc.target/powerpc/bfp/vec-extract-sig-2.c: Likewise.
	* gcc.target/powerpc/bfp/vec-extract-sig-3.c: Likewise.
	* gcc.target/powerpc/bfp/vec-insert-exp-2.c: Likewise.
	* gcc.target/powerpc/bfp/vec-insert-exp-3.c: Likewise.
	* gcc.target/powerpc/bfp/vec-insert-exp-6.c: Likewise.
	* gcc.target/powerpc/bfp/vec-insert-exp-7.c: Likewise.
	* gcc.target/powerpc/bfp/vec-test-data-class-2.c: Likewise.
	* gcc.target/powerpc/bfp/vec-test-data-class-3.c: Likewise.
	* gcc.target/powerpc/byte-in-either-range-1.c: Likewise.
	* gcc.target/powerpc/byte-in-range-1.c: Likewise.
	* gcc.target/powerpc/byte-in-set-1.c: Likewise.
	* gcc.target/powerpc/byte-in-set-2.c: Likewise.
	* gcc.target/powerpc/cmpb-3.c: Likewise.
	* gcc.target/powerpc/crypto-builtin-2.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-1.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-11.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-16.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-21.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-26.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-31.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-36.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-41.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-46.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-51.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-56.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-6.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-61.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-66.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-71.c: Likewise.
	* gcc.target/powerpc/dfp/dtstsfi-76.c: Likewise.
	* gcc.target/powerpc/no-r11-3.c: Likewise.
	* gcc.target/powerpc/pr80098-1.c: Likewise.
	* gcc.target/powerpc/pr80098-2.c: Likewise.
	* gcc.target/powerpc/pr80098-3.c: Likewise.
	* gcc.target/powerpc/pr80098-4.c: Likewise.
	* gcc.target/powerpc/vsu/vec-all-nez-7.c: Likewise.
	* gcc.target/powerpc/vsu/vec-any-eqz-7.c: Likewise.
	* gcc.target/powerpc/vsu/vec-cmpnez-7.c: Likewise.
	* gcc.target/powerpc/vsu/vec-cntlz-lsbb-2.c: Likewise.
	* gcc.target/powerpc/vsu/vec-cnttz-lsbb-2.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xl-len-12.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xl-len-13.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xlx-7.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xrx-7.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xst-len-12.c: Likewise.
	* gcc.target/powerpc/vsu/vec-xst-len-13.c: Likewise.

Comments

Segher Boessenkool Aug. 11, 2017, 7:14 p.m. UTC | #1 
Hi Bill,

On Thu, Aug 10, 2017 at 04:28:49PM -0500, Bill Schmidt wrote:
> This continues the cleanup of diagnostic messages in the rs6000 back end.  The
> primary focus is to make sure that we use quoted strings with %qs, %<, %> as
> appropriate, and that option strings are separated from translatable strings
> to make things easier on the internationalization folks, as requested in
> PR79845.  While working on this, I noticed a couple of places where the
> diagnostic strings result in excessively long lines, and cleaned these up as
> well.
> 
> One peculiarity I noticed, but did not attempt to address, is that a small
> handful of diagnostic strings are tagged with _N ().  There doesn't seem to
> be any rhyme or reason to this.  I expect it's a result of copy/paste from
> somewhere and most of these strings should be translated.  But that's for
> another day (and probably another person).
> 
> Bootstrapped and tested on powerpc64le-linux-gnu (POWER8 64-bit) and on
> powerpc64-linux-gnu (POWER7 32- and 64-bit) with no regressions.  Is this
> okay for trunk?

Yes, thank you!  One comment:

> @@ -6128,17 +6128,18 @@ altivec_resolve_overloaded_builtin (location_t loc
>  
>        if (nargs == 0)
>  	{
> -	  error ("%s only accepts %d arguments", name, (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
> +	  error ("builtin %qs only accepts %d arguments", name,
> +		 (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
>  	  return error_mark_node;
>  	}
>        if (fcode == ALTIVEC_BUILTIN_VEC_SPLATS && nargs != 1)
>  	{
> -	  error ("%s only accepts 1 argument", name);
> +	  error ("builtin %qs only accepts 1 argument", name);
>  	  return error_mark_node;
>  	}
>        if (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE && nargs != 2)
>  	{
> -	  error ("%s only accepts 2 arguments", name);
> +	  error ("builtin %qs only accepts 2 arguments", name);
>  	  return error_mark_node;
>  	}

This last "if" is redundant with the handling of VEC_PROMOTE about ten
lines up.  Maybe the "if (nargs == 0)" should be ordered later and things
simplified?

Okay with or without making that nicer.


Segher
Bill Schmidt Aug. 11, 2017, 7:21 p.m. UTC | #2 
Hi Segher,

Thanks for the review!

> On Aug 11, 2017, at 2:14 PM, Segher Boessenkool <segher@kernel.crashing.org> wrote:
> 
> Hi Bill,
> 
> On Thu, Aug 10, 2017 at 04:28:49PM -0500, Bill Schmidt wrote:
>> This continues the cleanup of diagnostic messages in the rs6000 back end.  The
>> primary focus is to make sure that we use quoted strings with %qs, %<, %> as
>> appropriate, and that option strings are separated from translatable strings
>> to make things easier on the internationalization folks, as requested in
>> PR79845.  While working on this, I noticed a couple of places where the
>> diagnostic strings result in excessively long lines, and cleaned these up as
>> well.
>> 
>> One peculiarity I noticed, but did not attempt to address, is that a small
>> handful of diagnostic strings are tagged with _N ().  There doesn't seem to
>> be any rhyme or reason to this.  I expect it's a result of copy/paste from
>> somewhere and most of these strings should be translated.  But that's for
>> another day (and probably another person).
>> 
>> Bootstrapped and tested on powerpc64le-linux-gnu (POWER8 64-bit) and on
>> powerpc64-linux-gnu (POWER7 32- and 64-bit) with no regressions.  Is this
>> okay for trunk?
> 
> Yes, thank you!  One comment:
> 
>> @@ -6128,17 +6128,18 @@ altivec_resolve_overloaded_builtin (location_t loc
>> 
>>       if (nargs == 0)
>> 	{
>> -	  error ("%s only accepts %d arguments", name, (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
>> +	  error ("builtin %qs only accepts %d arguments", name,
>> +		 (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
>> 	  return error_mark_node;
>> 	}
>>       if (fcode == ALTIVEC_BUILTIN_VEC_SPLATS && nargs != 1)
>> 	{
>> -	  error ("%s only accepts 1 argument", name);
>> +	  error ("builtin %qs only accepts 1 argument", name);
>> 	  return error_mark_node;
>> 	}
>>       if (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE && nargs != 2)
>> 	{
>> -	  error ("%s only accepts 2 arguments", name);
>> +	  error ("builtin %qs only accepts 2 arguments", name);
>> 	  return error_mark_node;
>> 	}
> 
> This last "if" is redundant with the handling of VEC_PROMOTE about ten
> lines up.  Maybe the "if (nargs == 0)" should be ordered later and things
> simplified?

Looks to me like it's equivalent to remove the whole "if (nargs == 0) {...}" clause.
I'll regstrap that and commit if it's clean.  Thanks again!

Bill

> 
> Okay with or without making that nicer.
> 
> 
> Segher
>
Segher Boessenkool Aug. 11, 2017, 7:43 p.m. UTC | #3 
On Fri, Aug 11, 2017 at 02:21:17PM -0500, Bill Schmidt wrote:
> >>       if (nargs == 0)
> >> 	{
> >> -	  error ("%s only accepts %d arguments", name, (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
> >> +	  error ("builtin %qs only accepts %d arguments", name,
> >> +		 (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
> >> 	  return error_mark_node;
> >> 	}
> >>       if (fcode == ALTIVEC_BUILTIN_VEC_SPLATS && nargs != 1)
> >> 	{
> >> -	  error ("%s only accepts 1 argument", name);
> >> +	  error ("builtin %qs only accepts 1 argument", name);
> >> 	  return error_mark_node;
> >> 	}
> >>       if (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE && nargs != 2)
> >> 	{
> >> -	  error ("%s only accepts 2 arguments", name);
> >> +	  error ("builtin %qs only accepts 2 arguments", name);
> >> 	  return error_mark_node;
> >> 	}
> > 
> > This last "if" is redundant with the handling of VEC_PROMOTE about ten
> > lines up.  Maybe the "if (nargs == 0)" should be ordered later and things
> > simplified?
> 
> Looks to me like it's equivalent to remove the whole "if (nargs == 0) {...}" clause.

Ah, right, there is an if() around this allowing only these two fcodes.

> I'll regstrap that and commit if it's clean.  Thanks again!

No, thank you, this wasn't the most fun work to do ;-)


Segher
Martin Sebor Aug. 13, 2017, 8:41 p.m. UTC | #4 
> --- gcc/config/rs6000/rs6000-c.c	(revision 250965)
> +++ gcc/config/rs6000/rs6000-c.c	(working copy)
> @@ -5812,7 +5812,7 @@ altivec_resolve_overloaded_builtin (location_t loc
>  	 types.  */
>        if (nargs != 2)
>  	{
> -	  error ("vec_mul only accepts 2 arguments");
> +	  error ("builtin %qs only accepts 2 arguments", "vec_mul");

I don' meant to nit-pick too much but it has been drilled into me
that the term is built-in, not builtin.  There are a number of
deviations from this preferred spelling in GCC messages already
(mainly though not exclusively in the rs600 back-end) but I think
it would be nice to converge on the preferred spelling.

https://gcc.gnu.org/codingconventions.html#Spelling

Martin
Bill Schmidt Aug. 14, 2017, 2:21 p.m. UTC | #5 
> On Aug 13, 2017, at 3:41 PM, Martin Sebor <msebor@gmail.com> wrote:
> 
>> --- gcc/config/rs6000/rs6000-c.c	(revision 250965)
>> +++ gcc/config/rs6000/rs6000-c.c	(working copy)
>> @@ -5812,7 +5812,7 @@ altivec_resolve_overloaded_builtin (location_t loc
>> 	 types.  */
>>       if (nargs != 2)
>> 	{
>> -	  error ("vec_mul only accepts 2 arguments");
>> +	  error ("builtin %qs only accepts 2 arguments", "vec_mul");
> 
> I don' meant to nit-pick too much but it has been drilled into me
> that the term is built-in, not builtin.  There are a number of
> deviations from this preferred spelling in GCC messages already
> (mainly though not exclusively in the rs600 back-end) but I think
> it would be nice to converge on the preferred spelling.

Martin, while I agree with you in principle, for now I have used up the time I
have available for messing with diagnostics, so I'm going to go ahead with
what we have for now.  Spelling patches are of course welcome. :-)

Bill

> 
> https://gcc.gnu.org/codingconventions.html#Spelling
> 
> Martin
>
Segher Boessenkool Aug. 14, 2017, 5:38 p.m. UTC | #6 
On Mon, Aug 14, 2017 at 09:21:51AM -0500, Bill Schmidt wrote:
> > On Aug 13, 2017, at 3:41 PM, Martin Sebor <msebor@gmail.com> wrote:
> >> --- gcc/config/rs6000/rs6000-c.c	(revision 250965)
> >> +++ gcc/config/rs6000/rs6000-c.c	(working copy)
> >> @@ -5812,7 +5812,7 @@ altivec_resolve_overloaded_builtin (location_t loc
> >> 	 types.  */
> >>       if (nargs != 2)
> >> 	{
> >> -	  error ("vec_mul only accepts 2 arguments");
> >> +	  error ("builtin %qs only accepts 2 arguments", "vec_mul");
> > 
> > I don' meant to nit-pick too much but it has been drilled into me
> > that the term is built-in, not builtin.  There are a number of
> > deviations from this preferred spelling in GCC messages already
> > (mainly though not exclusively in the rs600 back-end) but I think
> > it would be nice to converge on the preferred spelling.
> 
> Martin, while I agree with you in principle, for now I have used up the time I
> have available for messing with diagnostics, so I'm going to go ahead with
> what we have for now.  Spelling patches are of course welcome. :-)

"built-in" as a noun is not a word (other than referring to furniture).
GCC uses "builtin" in all command line options and function names
already.  Also see https://gcc.gnu.org/ml/gcc-patches/2001-06/msg00774.html
(and there was a more recent discussion but I can't find it).

Patches of course welcome; in this particular case, "builtin" can just
be deleted, but that won't be true everywhere, it would be nice if error
messages stay consistent.


Segher
diff mbox

Patch

Index: gcc/config/rs6000/linux64.h
===================================================================
--- gcc/config/rs6000/linux64.h	(revision 250965)
+++ gcc/config/rs6000/linux64.h	(working copy)
@@ -85,7 +85,7 @@  extern int dot_symbols;
 #undef	RS6000_ABI_NAME
 #define	RS6000_ABI_NAME "linux"
 
-#define INVALID_64BIT "-m%s not supported in this configuration"
+#define INVALID_64BIT "%<-m%s%> not supported in this configuration"
 #define INVALID_32BIT INVALID_64BIT
 
 #ifdef LINUX64_DEFAULT_ABI_ELFv2
Index: gcc/config/rs6000/rs6000-c.c
===================================================================
--- gcc/config/rs6000/rs6000-c.c	(revision 250965)
+++ gcc/config/rs6000/rs6000-c.c	(working copy)
@@ -5812,7 +5812,7 @@  altivec_resolve_overloaded_builtin (location_t loc
 	 types.  */
       if (nargs != 2)
 	{
-	  error ("vec_mul only accepts 2 arguments");
+	  error ("builtin %qs only accepts 2 arguments", "vec_mul");
 	  return error_mark_node;
 	}
 
@@ -5863,7 +5863,7 @@  altivec_resolve_overloaded_builtin (location_t loc
 	 for it (prior to power 9).  */
       if (nargs != 2)
 	{
-	  error ("vec_cmpne only accepts 2 arguments");
+	  error ("builtin %qs only accepts 2 arguments", "vec_cmpne");
 	  return error_mark_node;
 	}
 
@@ -5936,7 +5936,7 @@  altivec_resolve_overloaded_builtin (location_t loc
 	{
 	  const char *name = fcode == ALTIVEC_BUILTIN_VEC_ADDE ?
 	    "vec_adde": "vec_sube";
-	  error ("%s only accepts 3 arguments", name);
+	  error ("builtin %qs only accepts 3 arguments", name);
 	  return error_mark_node;
 	}
 
@@ -6019,7 +6019,7 @@  altivec_resolve_overloaded_builtin (location_t loc
 	{
 	  const char *name = fcode == ALTIVEC_BUILTIN_VEC_ADDEC ?
 	    "vec_addec": "vec_subec";
-	  error ("%s only accepts 3 arguments", name);
+	  error ("builtin %qs only accepts 3 arguments", name);
 	  return error_mark_node;
 	}
 
@@ -6128,17 +6128,18 @@  altivec_resolve_overloaded_builtin (location_t loc
 
       if (nargs == 0)
 	{
-	  error ("%s only accepts %d arguments", name, (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
+	  error ("builtin %qs only accepts %d arguments", name,
+		 (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE)+1 );
 	  return error_mark_node;
 	}
       if (fcode == ALTIVEC_BUILTIN_VEC_SPLATS && nargs != 1)
 	{
-	  error ("%s only accepts 1 argument", name);
+	  error ("builtin %qs only accepts 1 argument", name);
 	  return error_mark_node;
 	}
       if (fcode == ALTIVEC_BUILTIN_VEC_PROMOTE && nargs != 2)
 	{
-	  error ("%s only accepts 2 arguments", name);
+	  error ("builtin %qs only accepts 2 arguments", name);
 	  return error_mark_node;
 	}
       /* Ignore promote's element argument.  */
@@ -6204,7 +6205,7 @@  altivec_resolve_overloaded_builtin (location_t loc
       /* No second argument. */
       if (nargs != 2)
 	{
-	  error ("vec_extract only accepts 2 arguments");
+	  error ("builtin %qs only accepts 2 arguments", "vec_extract");
 	  return error_mark_node;
 	}
 
@@ -6373,7 +6374,7 @@  altivec_resolve_overloaded_builtin (location_t loc
       /* No second or third arguments. */
       if (nargs != 3)
 	{
-	  error ("vec_insert only accepts 3 arguments");
+	  error ("builtin %qs only accepts 3 arguments", "vec_insert");
 	  return error_mark_node;
 	}
 
@@ -6698,7 +6699,7 @@  altivec_resolve_overloaded_builtin (location_t loc
 
 	if (nargs != 2)
 	  {
-	    error ("__builtin_cmpb only accepts 2 arguments");
+	    error ("builtin %qs only accepts 2 arguments", "__builtin_cmpb");
 	    return error_mark_node;
 	  }
 
@@ -6739,7 +6740,8 @@  altivec_resolve_overloaded_builtin (location_t loc
 
 	if (nargs != 2)
 	  {
-	    error ("scalar_insert_exp only accepts 2 arguments");
+	    error ("builtin %qs only accepts 2 arguments",
+		   "scalar_insert_exp");
 	    return error_mark_node;
 	  }
 
@@ -6802,8 +6804,8 @@  altivec_resolve_overloaded_builtin (location_t loc
     if (unsupported_builtin)
       {
 	const char *name = rs6000_overloaded_builtin_name (fcode);
-	error ("builtin function %s not supported in this compiler configuration",
-	       name);
+	error ("builtin function %qs not supported in this compiler "
+	       "configuration", name);
 	return error_mark_node;
       }
   }
@@ -6810,7 +6812,7 @@  altivec_resolve_overloaded_builtin (location_t loc
  bad:
   {
     const char *name = rs6000_overloaded_builtin_name (fcode);
-    error ("invalid parameter combination for AltiVec intrinsic %s", name);
+    error ("invalid parameter combination for AltiVec intrinsic %qs", name);
     return error_mark_node;
   }
 }
Index: gcc/config/rs6000/rs6000.c
===================================================================
--- gcc/config/rs6000/rs6000.c	(revision 250965)
+++ gcc/config/rs6000/rs6000.c	(working copy)
@@ -3648,11 +3648,14 @@  rs6000_init_hard_regno_mode_ok (bool global_init_p
   if (rs6000_recip_control)
     {
       if (!flag_finite_math_only)
-	warning (0, "-mrecip requires -ffinite-math or -ffast-math");
+	warning (0, "%qs requires %qs or %qs", "-mrecip", "-ffinite-math",
+		 "-ffast-math");
       if (flag_trapping_math)
-	warning (0, "-mrecip requires -fno-trapping-math or -ffast-math");
+	warning (0, "%qs requires %qs or %qs", "-mrecip",
+		 "-fno-trapping-math", "-ffast-math");
       if (!flag_reciprocal_math)
-	warning (0, "-mrecip requires -freciprocal-math or -ffast-math");
+	warning (0, "%qs requires %qs or %qs", "-mrecip", "-freciprocal-math",
+		 "-ffast-math");
       if (flag_finite_math_only && !flag_trapping_math && flag_reciprocal_math)
 	{
 	  if (RS6000_RECIP_HAVE_RE_P (SFmode)
@@ -3752,7 +3755,7 @@  darwin_rs6000_override_options (void)
   if (TARGET_64BIT && ! TARGET_POWERPC64)
     {
       rs6000_isa_flags |= OPTION_MASK_POWERPC64;
-      warning (0, "-m64 requires PowerPC64 architecture, enabling");
+      warning (0, "%qs requires PowerPC64 architecture, enabling", "-m64");
     }
   if (flag_mkernel)
     {
@@ -3934,8 +3937,9 @@  rs6000_option_override_internal (bool global_init_
       && rs6000_alignment_flags == MASK_ALIGN_POWER
       && DEFAULT_ABI == ABI_DARWIN
       && TARGET_64BIT)
-    warning (0, "-malign-power is not supported for 64-bit Darwin;"
-	     " it is incompatible with the installed C and C++ libraries");
+    warning (0, "%qs is not supported for 64-bit Darwin;"
+	     " it is incompatible with the installed C and C++ libraries",
+	     "-malign-power");
 
   /* Numerous experiment shows that IRA based loop pressure
      calculation works better for RTL loop invariant motion on targets
@@ -4153,7 +4157,8 @@  rs6000_option_override_internal (bool global_init_
 	{
 	  rs6000_isa_flags &= ~OPTION_MASK_MULTIPLE;
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_MULTIPLE) != 0)
-	    warning (0, "-mmultiple is not supported on little endian systems");
+	    warning (0, "%qs is not supported on little endian systems",
+		     "-mmultiple");
 	}
 
       if (TARGET_STRING)
@@ -4160,7 +4165,8 @@  rs6000_option_override_internal (bool global_init_
 	{
 	  rs6000_isa_flags &= ~OPTION_MASK_STRING;
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_STRING) != 0)
-	    warning (0, "-mstring is not supported on little endian systems");
+	    warning (0, "%qs is not supported on little endian systems",
+		     "-mstring");
 	}
     }
 
@@ -4250,8 +4256,8 @@  rs6000_option_override_internal (bool global_init_
 	      rs6000_isa_flags |= (ISA_3_0_MASKS_SERVER & ~ignore_masks);
 	    }
 	  else
-	    error ("power9 target option is incompatible with -mcpu=<xxx> for "
-		   "<xxx> less than power9");
+	    error ("power9 target option is incompatible with %<%s=<xxx>%> "
+		   "for <xxx> less than power9", "-mcpu");
 	}
       else if ((ISA_3_0_MASKS_SERVER & rs6000_isa_flags_explicit)
 	       != (ISA_3_0_MASKS_SERVER & rs6000_isa_flags
@@ -4258,7 +4264,8 @@  rs6000_option_override_internal (bool global_init_
 		   & rs6000_isa_flags_explicit))
 	/* Enforce that none of the ISA_3_0_MASKS_SERVER flags
 	   were explicitly cleared.  */
-	error ("-mpower9-minmax incompatible with explicitly disabled options");
+	error ("%qs incompatible with explicitly disabled options",
+	       "-mpower9-minmax");
       else
 	rs6000_isa_flags |= ISA_3_0_MASKS_SERVER;
     }
@@ -4282,7 +4289,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_CRYPTO && !TARGET_ALTIVEC)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_CRYPTO)
-	error ("-mcrypto requires -maltivec");
+	error ("%qs requires %qs", "-mcrypto", "-maltivec");
       rs6000_isa_flags &= ~OPTION_MASK_CRYPTO;
     }
 
@@ -4289,7 +4296,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_DIRECT_MOVE && !TARGET_VSX)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_DIRECT_MOVE)
-	error ("-mdirect-move requires -mvsx");
+	error ("%qs requires %qs", "-mdirect-move", "-mvsx");
       rs6000_isa_flags &= ~OPTION_MASK_DIRECT_MOVE;
     }
 
@@ -4296,7 +4303,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_P8_VECTOR && !TARGET_ALTIVEC)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_P8_VECTOR)
-	error ("-mpower8-vector requires -maltivec");
+	error ("%qs requires %qs", "-mpower8-vector", "-maltivec");
       rs6000_isa_flags &= ~OPTION_MASK_P8_VECTOR;
     }
 
@@ -4304,7 +4311,7 @@  rs6000_option_override_internal (bool global_init_
     {
       if ((rs6000_isa_flags_explicit & OPTION_MASK_P8_VECTOR)
 	  && (rs6000_isa_flags_explicit & OPTION_MASK_VSX))
-	error ("-mpower8-vector requires -mvsx");
+	error ("%qs requires %qs", "-mpower8-vector", "-mvsx");
       else if ((rs6000_isa_flags_explicit & OPTION_MASK_P8_VECTOR) == 0)
 	{
 	  rs6000_isa_flags &= ~OPTION_MASK_P8_VECTOR;
@@ -4323,7 +4330,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_VSX_TIMODE && !TARGET_VSX)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_VSX_TIMODE)
-	error ("-mvsx-timode requires -mvsx");
+	error ("%qs requires %qs", "-mvsx-timode", "-mvsx");
       rs6000_isa_flags &= ~OPTION_MASK_VSX_TIMODE;
     }
 
@@ -4330,7 +4337,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_DFP && !TARGET_HARD_FLOAT)
     {
       if (rs6000_isa_flags_explicit & OPTION_MASK_DFP)
-	error ("-mhard-dfp requires -mhard-float");
+	error ("%qs requires %qs", "-mhard-dfp", "-mhard-float");
       rs6000_isa_flags &= ~OPTION_MASK_DFP;
     }
 
@@ -4354,7 +4361,8 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_QUAD_MEMORY && !WORDS_BIG_ENDIAN)
     {
       if ((rs6000_isa_flags_explicit & OPTION_MASK_QUAD_MEMORY) != 0)
-	warning (0, N_("-mquad-memory is not available in little endian mode"));
+	warning (0, N_("-mquad-memory is not available in little endian "
+		       "mode"));
 
       rs6000_isa_flags &= ~OPTION_MASK_QUAD_MEMORY;
     }
@@ -4379,10 +4387,11 @@  rs6000_option_override_internal (bool global_init_
       if (rs6000_isa_flags_explicit & OPTION_MASK_P8_FUSION)
 	{
 	  if (TARGET_P8_FUSION_SIGN)
-	    error ("-mpower8-fusion-sign requires -mpower8-fusion");
+	    error ("%qs requires %qs", "-mpower8-fusion-sign",
+		   "-mpower8-fusion");
 
 	  if (TARGET_TOC_FUSION)
-	    error ("-mtoc-fusion requires -mpower8-fusion");
+	    error ("%qs requires %qs", "-mtoc-fusion", "-mpower8-fusion");
 
 	  rs6000_isa_flags &= ~OPTION_MASK_P8_FUSION;
 	}
@@ -4399,7 +4408,7 @@  rs6000_option_override_internal (bool global_init_
 	     error messages.  However, if users have managed to select
 	     power9-fusion without selecting power8-fusion, they
 	     already know about undocumented flags.  */
-	  error ("-mpower9-fusion requires -mpower8-fusion");
+	  error ("%qs requires %qs", "-mpower9-fusion", "-mpower8-fusion");
 	  rs6000_isa_flags &= ~OPTION_MASK_P9_FUSION;
 	}
       else
@@ -4452,7 +4461,7 @@  rs6000_option_override_internal (bool global_init_
 	 already know about undocumented flags.  */
       if ((rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR) &&
 	  (rs6000_isa_flags_explicit & OPTION_MASK_P8_VECTOR))
-	error ("-mpower9-vector requires -mpower8-vector");
+	error ("%qs requires %qs", "-mpower9-vector", "-mpower8-vector");
       else if ((rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR) == 0)
 	{
 	  rs6000_isa_flags &= ~OPTION_MASK_P9_VECTOR;
@@ -4497,7 +4506,7 @@  rs6000_option_override_internal (bool global_init_
       if ((rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR)
 	  && (rs6000_isa_flags_explicit & (OPTION_MASK_P9_DFORM_SCALAR
 					   | OPTION_MASK_P9_DFORM_VECTOR)))
-	error ("-mpower9-dform requires -mpower9-vector");
+	error ("%qs requires %qs", "-mpower9-dform", "-mpower9-vector");
       else if (rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR)
 	{
 	  rs6000_isa_flags &=
@@ -4526,8 +4535,9 @@  rs6000_option_override_internal (bool global_init_
 	  && ((rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_VECTOR) ||
 	      (rs6000_isa_flags_explicit & OPTION_MASK_P9_DFORM_SCALAR) ||
 	      (TARGET_P9_DFORM_BOTH == 1)))
-	error ("-mpower9-dform, -mpower9-dform-vector, -mpower9-dform-scalar"
-	       " require -mdirect-move");
+	error ("%qs, %qs, %qs require %qs", "-mpower9-dform",
+	       "-mpower9-dform-vector", "-mpower9-dform-scalar",
+	       "-mdirect-move");
       else if ((rs6000_isa_flags_explicit & OPTION_MASK_DIRECT_MOVE) == 0)
 	{
 	  rs6000_isa_flags |= OPTION_MASK_DIRECT_MOVE;
@@ -4558,7 +4568,7 @@  rs6000_option_override_internal (bool global_init_
     {
       if (TARGET_ALLOW_MOVMISALIGN > 0
 	  && global_options_set.x_TARGET_ALLOW_MOVMISALIGN)
-	error ("-mallow-movmisalign requires -mvsx");
+	error ("%qs requires %qs", "-mallow-movmisalign", "-mvsx");
 
       TARGET_ALLOW_MOVMISALIGN = 0;
     }
@@ -4573,7 +4583,7 @@  rs6000_option_override_internal (bool global_init_
       if (!TARGET_VSX)
 	{
 	  if (rs6000_isa_flags_explicit & OPTION_MASK_EFFICIENT_UNALIGNED_VSX)
-	    error ("-mefficient-unaligned-vsx requires -mvsx");
+	    error ("%qs requires %qs", "-mefficient-unaligned-vsx", "-mvsx");
 
 	  rs6000_isa_flags &= ~OPTION_MASK_EFFICIENT_UNALIGNED_VSX;
 	}
@@ -4581,7 +4591,8 @@  rs6000_option_override_internal (bool global_init_
       else if (!TARGET_ALLOW_MOVMISALIGN)
 	{
 	  if (rs6000_isa_flags_explicit & OPTION_MASK_EFFICIENT_UNALIGNED_VSX)
-	    error ("-mefficient-unaligned-vsx requires -mallow-movmisalign");
+	    error ("%qs requires %qs", "-munefficient-unaligned-vsx",
+		   "-mallow-movmisalign");
 
 	  rs6000_isa_flags &= ~OPTION_MASK_EFFICIENT_UNALIGNED_VSX;
 	}
@@ -4619,7 +4630,7 @@  rs6000_option_override_internal (bool global_init_
       if (TARGET_FLOAT128_KEYWORD)
 	{
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_KEYWORD) != 0)
-	    error ("-mfloat128 requires VSX support");
+	    error ("%qs requires VSX support", "-mfloat128");
 
 	  rs6000_isa_flags &= ~(OPTION_MASK_FLOAT128_TYPE
 				| OPTION_MASK_FLOAT128_KEYWORD
@@ -4629,7 +4640,7 @@  rs6000_option_override_internal (bool global_init_
       else if (TARGET_FLOAT128_TYPE)
 	{
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_TYPE) != 0)
-	    error ("-mfloat128-type requires VSX support");
+	    error ("%qs requires VSX support", "-mfloat128-type");
 
 	  rs6000_isa_flags &= ~(OPTION_MASK_FLOAT128_TYPE
 				| OPTION_MASK_FLOAT128_KEYWORD
@@ -4645,7 +4656,7 @@  rs6000_option_override_internal (bool global_init_
 	{
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_KEYWORD) != 0)
 	    {
-	      error ("-mfloat128 requires -mfloat128-type");
+	      error ("%qs requires %qs", "-mfloat128", "-mfloat128-type");
 	      rs6000_isa_flags &= ~(OPTION_MASK_FLOAT128_TYPE
 				    | OPTION_MASK_FLOAT128_KEYWORD
 				    | OPTION_MASK_FLOAT128_HW);
@@ -4658,7 +4669,8 @@  rs6000_option_override_internal (bool global_init_
 	{
 	  if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_HW) != 0)
 	    {
-	      error ("-mfloat128-hardware requires -mfloat128-type");
+	      error ("%qs requires %qs", "-mfloat128-hardware",
+		     "-mfloat128-type");
 	      rs6000_isa_flags &= ~OPTION_MASK_FLOAT128_HW;
 	    }
 	  else
@@ -4681,7 +4693,7 @@  rs6000_option_override_internal (bool global_init_
       && (rs6000_isa_flags & ISA_3_0_MASKS_IEEE) != ISA_3_0_MASKS_IEEE)
     {
       if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_HW) != 0)
-	error ("-mfloat128-hardware requires full ISA 3.0 support");
+	error ("%qs requires full ISA 3.0 support", "-mfloat128-hardware");
 
       rs6000_isa_flags &= ~OPTION_MASK_FLOAT128_HW;
     }
@@ -4689,7 +4701,7 @@  rs6000_option_override_internal (bool global_init_
   if (TARGET_FLOAT128_HW && !TARGET_64BIT)
     {
       if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_HW) != 0)
-	error ("-mfloat128-hardware requires -m64");
+	error ("%qs requires %qs", "-mfloat128-hardware", "-m64");
 
       rs6000_isa_flags &= ~OPTION_MASK_FLOAT128_HW;
     }
@@ -4753,8 +4765,8 @@  rs6000_option_override_internal (bool global_init_
 	    rs6000_veclib_handler = rs6000_builtin_vectorized_libmass;
 	  else
 	    {
-	      error ("unknown vectorization library ABI type (%s) for "
-		     "-mveclibabi= switch", rs6000_veclibabi_name);
+	      error ("unknown vectorization library ABI type (%qs) for "
+		     "%qs switch", rs6000_veclibabi_name, "-mveclibabi=");
 	      ret = false;
 	    }
 	}
@@ -4970,13 +4982,13 @@  rs6000_option_override_internal (bool global_init_
       errno = 0;
       long offset = strtol (str, &endp, 0);
       if (!*str || *endp || errno)
-	error ("%qs is not a valid number "
-	       "in -mstack-protector-guard-offset=", str);
+	error ("%qs is not a valid number in %qs", str,
+	       "-mstack-protector-guard-offset=");
 
       if (!IN_RANGE (offset, -0x8000, 0x7fff)
 	  || (TARGET_64BIT && (offset & 3)))
-	error ("%qs is not a valid offset "
-	       "in -mstack-protector-guard-offset=", str);
+	error ("%qs is not a valid offset in %qs", str,
+	       "-mstack-protector-guard-offset=");
 
       rs6000_stack_protector_guard_offset = offset;
     }
@@ -4987,8 +4999,8 @@  rs6000_option_override_internal (bool global_init_
       int reg = decode_reg_name (str);
 
       if (!IN_RANGE (reg, 1, 31))
-	error ("%qs is not a valid base register "
-	       "in -mstack-protector-guard-reg=", str);
+	error ("%qs is not a valid base register in %qs", str,
+	       "-mstack-protector-guard-reg=");
 
       rs6000_stack_protector_guard_reg = reg;
     }
@@ -4995,7 +5007,7 @@  rs6000_option_override_internal (bool global_init_
 
   if (rs6000_stack_protector_guard == SSP_TLS
       && !IN_RANGE (rs6000_stack_protector_guard_reg, 1, 31))
-    error ("-mstack-protector-guard=tls needs a valid base register");
+    error ("%qs needs a valid base register", "-mstack-protector-guard=tls");
 
   if (global_init_p)
     {
@@ -5293,7 +5305,7 @@  rs6000_option_override_internal (bool global_init_
 
 	      if (i == ARRAY_SIZE (recip_options))
 		{
-		  error ("unknown option for -mrecip=%s", q);
+		  error ("unknown option for %<%s=%s%>", "-mrecip", q);
 		  invert = false;
 		  mask = 0;
 		  ret = false;
@@ -11227,7 +11239,8 @@  rs6000_return_in_memory (const_tree type, const_tr
       if (!warned_for_return_big_vectors)
 	{
 	  warning (OPT_Wpsabi, "GCC vector returned by reference: "
-		   "non-standard ABI extension with no compatibility guarantee");
+		   "non-standard ABI extension with no compatibility "
+		   "guarantee");
 	  warned_for_return_big_vectors = true;
 	}
       return true;
@@ -11389,8 +11402,8 @@  init_cumulative_args (CUMULATIVE_ARGS *cum, tree f
       && ALTIVEC_VECTOR_MODE (TYPE_MODE (TREE_TYPE (fntype))))
     {
       error ("cannot return value in vector register because"
-	     " altivec instructions are disabled, use -maltivec"
-	     " to enable them");
+	     " altivec instructions are disabled, use %qs"
+	     " to enable them", "-maltivec");
     }
 }
 
@@ -11856,8 +11869,8 @@  rs6000_function_arg_advance_1 (CUMULATIVE_ARGS *cu
 
 	  if (!TARGET_ALTIVEC)
 	    error ("cannot pass argument in vector register because"
-		   " altivec instructions are disabled, use -maltivec"
-		   " to enable them");
+		   " altivec instructions are disabled, use %qs"
+		   " to enable them", "-maltivec");
 
 	  /* PowerPC64 Linux and AIX allocate GPRs for a vector argument
 	     even if it is going to be passed in a vector register.
@@ -12774,7 +12787,8 @@  rs6000_pass_by_reference (cumulative_args_t cum AT
       if (!warned_for_pass_big_vectors)
 	{
 	  warning (OPT_Wpsabi, "GCC vector passed by reference: "
-		   "non-standard ABI extension with no compatibility guarantee");
+		   "non-standard ABI extension with no compatibility "
+		   "guarantee");
 	  warned_for_pass_big_vectors = true;
 	}
       return 1;
@@ -13564,7 +13578,8 @@  def_builtin (const char *name, tree type, enum rs6
 
   if (rs6000_builtin_decls[(int)code])
     fatal_error (input_location,
-		 "internal error: builtin function %s already processed", name);
+		 "internal error: builtin function %qs already processed",
+		 name);
 
   rs6000_builtin_decls[(int)code] = t =
     add_builtin_function (name, type, (int)code, BUILT_IN_MD, NULL, NULL_TREE);
@@ -14164,7 +14179,8 @@  altivec_expand_predicate_builtin (enum insn_code i
 
   if (TREE_CODE (cr6_form) != INTEGER_CST)
     {
-      error ("argument 1 of __builtin_altivec_predicate must be a constant");
+      error ("argument 1 of %qs must be a constant",
+	     "__builtin_altivec_predicate");
       return const0_rtx;
     }
   else
@@ -14221,7 +14237,8 @@  altivec_expand_predicate_builtin (enum insn_code i
       emit_insn (gen_cr6_test_for_lt_reverse (target));
       break;
     default:
-      error ("argument 1 of __builtin_altivec_predicate is out of range");
+      error ("argument 1 of %qs is out of range",
+	     "__builtin_altivec_predicate");
       break;
     }
 
@@ -14728,7 +14745,7 @@  htm_expand_builtin (tree exp, rtx target, bool * e
     {
       size_t uns_fcode = (size_t)fcode;
       const char *name = rs6000_builtin_info[uns_fcode].name;
-      error ("builtin %s is only valid in 64-bit mode", name);
+      error ("builtin %qs is only valid in 64-bit mode", name);
       return const0_rtx;
     }
 
@@ -14925,7 +14942,7 @@  cpu_expand_builtin (enum rs6000_builtins fcode, tr
 
   if (TREE_CODE (arg) != STRING_CST)
     {
-      error ("builtin %s only accepts a string argument",
+      error ("builtin %qs only accepts a string argument",
 	     rs6000_builtin_info[(size_t) fcode].name);
       return const0_rtx;
     }
@@ -14944,7 +14961,7 @@  cpu_expand_builtin (enum rs6000_builtins fcode, tr
       if (cpuid == NULL_RTX)
 	{
 	  /* Invalid CPU argument.  */
-	  error ("cpu %s is an invalid argument to builtin %s",
+	  error ("cpu %qs is an invalid argument to builtin %qs",
 		 cpu, rs6000_builtin_info[(size_t) fcode].name);
 	  return const0_rtx;
 	}
@@ -14972,8 +14989,8 @@  cpu_expand_builtin (enum rs6000_builtins fcode, tr
       if (mask == NULL_RTX)
 	{
 	  /* Invalid HWCAP argument.  */
-	  error ("hwcap %s is an invalid argument to builtin %s",
-		 hwcap, rs6000_builtin_info[(size_t) fcode].name);
+	  error ("%s %qs is an invalid argument to builtin %qs",
+		 "hwcap", hwcap, rs6000_builtin_info[(size_t) fcode].name);
 	  return const0_rtx;
 	}
 
@@ -14998,7 +15015,7 @@  cpu_expand_builtin (enum rs6000_builtins fcode, tr
   cpu_builtin_p = true;
 
 #else
-  warning (0, "%s needs GLIBC (2.23 and newer) that exports hardware "
+  warning (0, "builtin %qs needs GLIBC (2.23 and newer) that exports hardware "
 	   "capability bits", rs6000_builtin_info[(size_t) fcode].name);
   
   /* For old LIBCs, always return FALSE.  */
@@ -15673,7 +15690,7 @@  altivec_expand_builtin (tree exp, rtx target, bool
       if (TREE_CODE (arg0) != INTEGER_CST
 	  || TREE_INT_CST_LOW (arg0) & ~0x3)
 	{
-	  error ("argument to dss must be a 2-bit unsigned literal");
+	  error ("argument to %qs must be a 2-bit unsigned literal", "dss");
 	  return const0_rtx;
 	}
 
@@ -15721,7 +15738,7 @@  altivec_expand_builtin (tree exp, rtx target, bool
 
       if (TREE_CODE (arg1) != INTEGER_CST || TREE_INT_CST_LOW (arg1) > 12)
 	{
-	  error ("second argument to vec_vextract4b must be 0..12");
+	  error ("second argument to %qs must be 0..12", "vec_vextract4b");
 	  return expand_call (exp, target, false);
 	}
       break;
@@ -15738,7 +15755,7 @@  altivec_expand_builtin (tree exp, rtx target, bool
 
       if (TREE_CODE (arg2) != INTEGER_CST || TREE_INT_CST_LOW (arg2) > 12)
 	{
-	  error ("third argument to vec_vinsert4b must be 0..12");
+	  error ("third argument to %qs must be 0..12", "vec_vinsert4b");
 	  return expand_call (exp, target, false);
 	}
       break;
@@ -15992,7 +16009,8 @@  paired_expand_predicate_builtin (enum insn_code ic
 
   if (TREE_CODE (form) != INTEGER_CST)
     {
-      error ("argument 1 of __builtin_paired_predicate must be a constant");
+      error ("argument 1 of %s must be a constant",
+	     "__builtin_paired_predicate");
       return const0_rtx;
     }
   else
@@ -16039,7 +16057,8 @@  paired_expand_predicate_builtin (enum insn_code ic
       emit_insn (gen_move_from_CR_ov_bit (target, scratch));
       return target;
     default:
-      error ("argument 1 of __builtin_paired_predicate is out of range");
+      error ("argument 1 of %qs is out of range",
+	     "__builtin_paired_predicate");
       return const0_rtx;
     }
 
@@ -16060,45 +16079,49 @@  rs6000_invalid_builtin (enum rs6000_builtins fncod
 
   gcc_assert (name != NULL);
   if ((fnmask & RS6000_BTM_CELL) != 0)
-    error ("builtin function %s is only valid for the cell processor", name);
+    error ("builtin function %qs is only valid for the cell processor", name);
   else if ((fnmask & RS6000_BTM_VSX) != 0)
-    error ("builtin function %s requires the -mvsx option", name);
+    error ("builtin function %qs requires the %qs option", name, "-mvsx");
   else if ((fnmask & RS6000_BTM_HTM) != 0)
-    error ("builtin function %s requires the -mhtm option", name);
+    error ("builtin function %qs requires the %qs option", name, "-mhtm");
   else if ((fnmask & RS6000_BTM_ALTIVEC) != 0)
-    error ("builtin function %s requires the -maltivec option", name);
+    error ("builtin function %qs requires the %qs option", name, "-maltivec");
   else if ((fnmask & RS6000_BTM_PAIRED) != 0)
-    error ("builtin function %s requires the -mpaired option", name);
+    error ("builtin function %qs requires the %qs option", name, "-mpaired");
   else if ((fnmask & (RS6000_BTM_DFP | RS6000_BTM_P8_VECTOR))
 	   == (RS6000_BTM_DFP | RS6000_BTM_P8_VECTOR))
-    error ("builtin function %s requires the -mhard-dfp and"
-	   " -mpower8-vector options", name);
+    error ("builtin function %qs requires the %qs and %qs options",
+	   name, "-mhard-dfp", "-mpower8-vector");
   else if ((fnmask & RS6000_BTM_DFP) != 0)
-    error ("builtin function %s requires the -mhard-dfp option", name);
+    error ("builtin function %qs requires the %qs option", name, "-mhard-dfp");
   else if ((fnmask & RS6000_BTM_P8_VECTOR) != 0)
-    error ("builtin function %s requires the -mpower8-vector option", name);
+    error ("builtin function %qs requires the %qs option", name,
+	   "-mpower8-vector");
   else if ((fnmask & (RS6000_BTM_P9_VECTOR | RS6000_BTM_64BIT))
 	   == (RS6000_BTM_P9_VECTOR | RS6000_BTM_64BIT))
-    error ("builtin function %s requires the -mcpu=power9 and"
-	   " -m64 options", name);
+    error ("builtin function %qs requires the %qs and %qs options",
+	   name, "-mcpu=power9", "-m64");
   else if ((fnmask & RS6000_BTM_P9_VECTOR) != 0)
-    error ("builtin function %s requires the -mcpu=power9 option", name);
+    error ("builtin function %qs requires the %qs option", name,
+	   "-mcpu=power9");
   else if ((fnmask & (RS6000_BTM_P9_MISC | RS6000_BTM_64BIT))
 	   == (RS6000_BTM_P9_MISC | RS6000_BTM_64BIT))
-    error ("builtin function %s requires the -mcpu=power9 and"
-	   " -m64 options", name);
+    error ("builtin function %qs requires the %qs and %qs options",
+	   name, "-mcpu=power9", "-m64");
   else if ((fnmask & RS6000_BTM_P9_MISC) == RS6000_BTM_P9_MISC)
-    error ("builtin function %s requires the -mcpu=power9 option", name);
+    error ("builtin function %qs requires the %qs option", name,
+	   "-mcpu=power9");
   else if ((fnmask & (RS6000_BTM_HARD_FLOAT | RS6000_BTM_LDBL128))
 	   == (RS6000_BTM_HARD_FLOAT | RS6000_BTM_LDBL128))
-    error ("builtin function %s requires the -mhard-float and"
-	   " -mlong-double-128 options", name);
+    error ("builtin function %qs requires the %qs and %qs options",
+	   name, "-mhard-float", "-mlong-double-128");
   else if ((fnmask & RS6000_BTM_HARD_FLOAT) != 0)
-    error ("builtin function %s requires the -mhard-float option", name);
+    error ("builtin function %qs requires the %qs option", name,
+	   "-mhard-float");
   else if ((fnmask & RS6000_BTM_FLOAT128) != 0)
-    error ("builtin function %s requires the -mfloat128 option", name);
+    error ("builtin function %qs requires the %qs option", name, "-mfloat128");
   else
-    error ("builtin function %s is not supported with the current options",
+    error ("builtin function %qs is not supported with the current options",
 	   name);
 }
 
@@ -18059,8 +18082,8 @@  builtin_function_type (machine_mode mode_ret, mach
 
   if (!ret_type)
     fatal_error (input_location,
-		 "internal error: builtin function %s had an unexpected "
-		 "return type %s", name, GET_MODE_NAME (h.mode[0]));
+		 "internal error: builtin function %qs had an unexpected "
+		 "return type %qs", name, GET_MODE_NAME (h.mode[0]));
 
   for (i = 0; i < (int) ARRAY_SIZE (arg_type); i++)
     arg_type[i] = NULL_TREE;
@@ -18076,8 +18099,8 @@  builtin_function_type (machine_mode mode_ret, mach
 
       if (!arg_type[i])
 	fatal_error (input_location,
-		     "internal error: builtin function %s, argument %d "
-		     "had unexpected argument type %s", name, i,
+		     "internal error: builtin function %qs, argument %d "
+		     "had unexpected argument type %qs", name, i,
 		     GET_MODE_NAME (m));
     }
 
@@ -28974,7 +28997,7 @@  rs6000_expand_split_stack_prologue (void)
 
   if (global_regs[29])
     {
-      error ("-fsplit-stack uses register r29");
+      error ("%qs uses register r29", "-fsplit-stack");
       inform (DECL_SOURCE_LOCATION (global_regs_decl[29]),
 	      "conflicts with %qD", global_regs_decl[29]);
     }
@@ -32273,7 +32296,7 @@  rs6000_trampoline_init (rtx m_tramp, tree fndecl,
 
 	if (!TARGET_POINTERS_TO_NESTED_FUNCTIONS)
 	  error ("you cannot take the address of a nested function if you use "
-		 "the -mno-pointers-to-nested-functions option.");
+		 "the %qs option", "-mno-pointers-to-nested-functions");
 
 	fnmem = gen_const_mem (Pmode, force_reg (Pmode, fnaddr));
 	fn_reg = gen_reg_rtx (Pmode);
@@ -32367,7 +32390,7 @@  rs6000_handle_altivec_attribute (tree *node,
 	{
 	  if (TARGET_64BIT)
 	    error ("use of %<long%> in AltiVec types is invalid for "
-		   "64-bit code without -mvsx");
+		   "64-bit code without %qs", "-mvsx");
 	  else if (rs6000_warn_altivec_long)
 	    warning (0, "use of %<long%> in AltiVec types is deprecated; "
 		     "use %<int%>");
@@ -32374,10 +32397,11 @@  rs6000_handle_altivec_attribute (tree *node,
 	}
       else if (type == long_long_unsigned_type_node
 	       || type == long_long_integer_type_node)
-	error ("use of %<long long%> in AltiVec types is invalid without "
+	error ("use of %<long long%> in AltiVec types is invalid without %qs",
 	       "-mvsx");
       else if (type == double_type_node)
-	error ("use of %<double%> in AltiVec types is invalid without -mvsx");
+	error ("use of %<double%> in AltiVec types is invalid without %qs",
+	       "-mvsx");
     }
 
   switch (altivec_type)
@@ -36326,12 +36350,12 @@  rs6000_inner_target_options (tree args, bool attr_
 		}
 
 	      if (cpu_opt)
-		error ("invalid cpu \"%s\" for %s\"%s\"%s", cpu_opt, eprefix,
+		error ("invalid cpu %qs for %s%qs%s", cpu_opt, eprefix,
 		       q, esuffix);
 	      else if (not_valid_p)
-		error ("%s\"%s\"%s is not allowed", eprefix, q, esuffix);
+		error ("%s%qs%s is not allowed", eprefix, q, esuffix);
 	      else
-		error ("%s\"%s\"%s is invalid", eprefix, q, esuffix);
+		error ("%s%qs%s is invalid", eprefix, q, esuffix);
 	    }
 	}
     }
@@ -36856,7 +36880,7 @@  rs6000_disable_incompatible_switches (void)
 		if ((set_flags & rs6000_opt_masks[j].mask) != 0)
 		  {
 		    set_flags &= ~rs6000_opt_masks[j].mask;
-		    error ("-mno-%s turns off -m%s",
+		    error ("%<-mno-%s%> turns off %<-m%s%>",
 			   flags[i].name,
 			   rs6000_opt_masks[j].name);
 		  }
@@ -36873,7 +36897,7 @@  rs6000_disable_incompatible_switches (void)
       && (rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR) != 0
       && TARGET_P9_DFORM_BOTH > 0)
     {
-      error ("-mno-power9-vector turns off -mpower9-dform");
+      error ("%qs turns off %qs", "-mno-power9-vector", "-mpower9-dform");
       TARGET_P9_DFORM_BOTH = 0;
     }
 
Index: gcc/config/rs6000/sysv4.h
===================================================================
--- gcc/config/rs6000/sysv4.h	(revision 250965)
+++ gcc/config/rs6000/sysv4.h	(working copy)
@@ -108,7 +108,7 @@  do {									\
   else									\
     {									\
       rs6000_current_abi = ABI_V4;					\
-      error ("bad value for -mcall-%s", rs6000_abi_name);		\
+      error ("bad value for %<%s-%s%>", "-mcall", rs6000_abi_name);	\
     }									\
 									\
   if (rs6000_sdata_name)						\
@@ -124,7 +124,7 @@  do {									\
       else if (!strcmp (rs6000_sdata_name, "eabi"))			\
 	rs6000_sdata = SDATA_EABI;					\
       else								\
-	error ("bad value for -msdata=%s", rs6000_sdata_name);		\
+	error ("bad value for %<%s=%s%>", "-msdata", rs6000_sdata_name);\
     }									\
   else if (DEFAULT_ABI == ABI_V4)					\
     {									\
@@ -141,8 +141,8 @@  do {									\
       (rs6000_sdata == SDATA_EABI || rs6000_sdata == SDATA_SYSV))	\
     {									\
       rs6000_sdata = SDATA_DATA;					\
-      error ("-mrelocatable and -msdata=%s are incompatible",		\
-	     rs6000_sdata_name);					\
+      error ("%qs and %<%s=%s%> are incompatible", rs6000_sdata_name,	\
+	     "-mrelocatable", "-msdata");				\
     }									\
 									\
   else if (flag_pic && DEFAULT_ABI == ABI_V4				\
@@ -150,9 +150,9 @@  do {									\
 	       || rs6000_sdata == SDATA_SYSV))				\
     {									\
       rs6000_sdata = SDATA_DATA;					\
-      error ("-f%s and -msdata=%s are incompatible",			\
+      error ("%<-f%s%> and %<%s=%s%> are incompatible",			\
 	     (flag_pic > 1) ? "PIC" : "pic",				\
-	     rs6000_sdata_name);					\
+	     "-msdata", rs6000_sdata_name);				\
     }									\
 									\
   if ((rs6000_sdata != SDATA_NONE && DEFAULT_ABI != ABI_V4)		\
@@ -159,8 +159,8 @@  do {									\
       || (rs6000_sdata == SDATA_EABI && !TARGET_EABI))			\
     {									\
       rs6000_sdata = SDATA_NONE;					\
-      error ("-msdata=%s and -mcall-%s are incompatible",		\
-	     rs6000_sdata_name, rs6000_abi_name);			\
+      error ("%<%s=%s%> and %<%s-%s%> are incompatible",		\
+	     "-msdata", "-mcall", rs6000_sdata_name, rs6000_abi_name);	\
     }									\
 									\
   targetm.have_srodata_section = rs6000_sdata == SDATA_EABI;		\
@@ -168,26 +168,27 @@  do {									\
   if (TARGET_RELOCATABLE && !TARGET_MINIMAL_TOC)			\
     {									\
       rs6000_isa_flags |= OPTION_MASK_MINIMAL_TOC;			\
-      error ("-mrelocatable and -mno-minimal-toc are incompatible");	\
+      error ("%qs and %qs are incompatible", "-mrelocatable",		\
+	     "-mno-minimal-toc");					\
     }									\
 									\
   if (TARGET_RELOCATABLE && rs6000_current_abi != ABI_V4)		\
     {									\
       rs6000_isa_flags &= ~OPTION_MASK_RELOCATABLE;			\
-      error ("-mrelocatable and -mcall-%s are incompatible",		\
-	     rs6000_abi_name);						\
+      error ("%qs and %<%s-%s%> are incompatible",			\
+	     "-mrelocatable", "-mcall", rs6000_abi_name);		\
     }									\
 									\
   if (!TARGET_64BIT && flag_pic > 1 && rs6000_current_abi != ABI_V4)	\
     {									\
       flag_pic = 0;							\
-      error ("-fPIC and -mcall-%s are incompatible",			\
-	     rs6000_abi_name);						\
+      error ("%qs and %<%s-%s%> are incompatible",			\
+	     "-fPIC", "-mcall", rs6000_abi_name);			\
     }									\
 									\
   if (TARGET_SECURE_PLT != secure_plt)					\
     {									\
-      error ("-msecure-plt not supported by your assembler");		\
+      error ("%qs not supported by your assembler", "-msecure-plt");	\
     }									\
 									\
   if (flag_pic > 1 && DEFAULT_ABI == ABI_V4)				\
@@ -215,7 +216,7 @@  do {									\
 # define SUBSUBTARGET_OVERRIDE_OPTIONS					\
 do {									\
   if ((TARGET_DEFAULT ^ rs6000_isa_flags) & OPTION_MASK_64BIT)		\
-    error ("-m%s not supported in this configuration",			\
+    error ("%<-m%s%> not supported in this configuration",		\
 	   (rs6000_isa_flags & OPTION_MASK_64BIT) ? "64" : "32");	\
 } while (0)
 #endif
Index: gcc/testsuite/g++.dg/ext/altivec-cell-5.C
===================================================================
--- gcc/testsuite/g++.dg/ext/altivec-cell-5.C	(revision 250965)
+++ gcc/testsuite/g++.dg/ext/altivec-cell-5.C	(working copy)
@@ -8,18 +8,18 @@ 
 int main(int argc, char **argv)
 {
 vector float t;
-    vec_promote();                      /* { dg-error "vec_promote only accepts 2" } */
-    vec_promote(1.0f);                  /* { dg-error "vec_promote only accepts 2" } */
-    vec_promote(1.0f, 2, 3);            /* { dg-error "vec_promote only accepts 2" } */
-    vec_extract ();                     /* { dg-error "vec_extract only accepts 2" } */
-    vec_extract (t);                    /* { dg-error "vec_extract only accepts 2" } */
+    vec_promote();                      /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_promote(1.0f);                  /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_promote(1.0f, 2, 3);            /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_extract ();                     /* { dg-error "builtin 'vec_extract' only accepts 2" } */
+    vec_extract (t);                    /* { dg-error "builtin 'vec_extract' only accepts 2" } */
     vec_extract (t, 2);
-    vec_extract (t, 2, 5, 6);           /* { dg-error "vec_extract only accepts 2" } */
-    vec_splats ();                      /* { dg-error "vec_splats only accepts 1" } */
-    vec_splats (t, 3);                  /* { dg-error "vec_splats only accepts 1" } */
-    vec_insert ();                      /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t);                     /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t, 3);                  /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t, 3, 2, 4, 6, 6);      /* { dg-error "vec_insert only accepts 3" } */
+    vec_extract (t, 2, 5, 6);           /* { dg-error "builtin 'vec_extract' only accepts 2" } */
+    vec_splats ();                      /* { dg-error "builtin 'vec_splats' only accepts 1" } */
+    vec_splats (t, 3);                  /* { dg-error "builtin 'vec_splats' only accepts 1" } */
+    vec_insert ();                      /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t);                     /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t, 3);                  /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t, 3, 2, 4, 6, 6);      /* { dg-error "builtin 'vec_insert' only accepts 3" } */
     return 0;
 }  
Index: gcc/testsuite/gcc.target/powerpc/altivec-cell-5.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/altivec-cell-5.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/altivec-cell-5.c	(working copy)
@@ -8,18 +8,18 @@ 
 int main(int argc, char **argv)
 {
 vector float t;
-    vec_promote();                      /* { dg-error "vec_promote only accepts 2" } */
-    vec_promote(1.0f);                  /* { dg-error "vec_promote only accepts 2" } */
-    vec_promote(1.0f, 2, 3);            /* { dg-error "vec_promote only accepts 2" } */
-    vec_extract ();                     /* { dg-error "vec_extract only accepts 2" } */
-    vec_extract (t);                    /* { dg-error "vec_extract only accepts 2" } */
+    vec_promote();                      /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_promote(1.0f);                  /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_promote(1.0f, 2, 3);            /* { dg-error "builtin 'vec_promote' only accepts 2" } */
+    vec_extract ();                     /* { dg-error "builtin 'vec_extract' only accepts 2" } */
+    vec_extract (t);                    /* { dg-error "builtin 'vec_extract' only accepts 2" } */
     vec_extract (t, 2);
-    vec_extract (t, 2, 5, 6);           /* { dg-error "vec_extract only accepts 2" } */
-    vec_splats ();                      /* { dg-error "vec_splats only accepts 1" } */
-    vec_splats (t, 3);                  /* { dg-error "vec_splats only accepts 1" } */
-    vec_insert ();                      /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t);                     /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t, 3);                  /* { dg-error "vec_insert only accepts 3" } */
-    vec_insert (t, 3, 2, 4, 6, 6);      /* { dg-error "vec_insert only accepts 3" } */
+    vec_extract (t, 2, 5, 6);           /* { dg-error "builtin 'vec_extract' only accepts 2" } */
+    vec_splats ();                      /* { dg-error "builtin 'vec_splats' only accepts 1" } */
+    vec_splats (t, 3);                  /* { dg-error "builtin 'vec_splats' only accepts 1" } */
+    vec_insert ();                      /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t);                     /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t, 3);                  /* { dg-error "builtin 'vec_insert' only accepts 3" } */
+    vec_insert (t, 3, 2, 4, 6, 6);      /* { dg-error "builtin 'vec_insert' only accepts 3" } */
     return 0;
 }  
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-eq-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-eq-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-eq-2.c	(working copy)
@@ -12,5 +12,5 @@  compare_exponents_eq (double *exponent1_p, double
   double exponent1 = *exponent1_p;
   double exponent2 = *exponent2_p;
 
-  return __builtin_vec_scalar_cmp_exp_eq (exponent1, exponent2);	/* { dg-error "builtin function __builtin_vsx_scalar_cmp_exp_dp_eq requires" } */
+  return __builtin_vec_scalar_cmp_exp_eq (exponent1, exponent2);	/* { dg-error "builtin function '__builtin_vsx_scalar_cmp_exp_dp_eq' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-gt-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-gt-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-gt-2.c	(working copy)
@@ -12,5 +12,5 @@  compare_exponents_gt (double *exponent1_p, double
   double exponent1 = *exponent1_p;
   double exponent2 = *exponent2_p;
 
-  return __builtin_vec_scalar_cmp_exp_gt (exponent1, exponent2); /* { dg-error "builtin function __builtin_vsx_scalar_cmp_exp_dp_gt requires" } */
+  return __builtin_vec_scalar_cmp_exp_gt (exponent1, exponent2); /* { dg-error "builtin function '__builtin_vsx_scalar_cmp_exp_dp_gt' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-lt-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-lt-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-lt-2.c	(working copy)
@@ -12,5 +12,5 @@  compare_exponents_lt (double *exponent1_p, double
   double exponent1 = *exponent1_p;
   double exponent2 = *exponent2_p;
 
-  return __builtin_vec_scalar_cmp_exp_lt (exponent1, exponent2);	/* { dg-error "builtin function __builtin_vsx_scalar_cmp_exp_dp_lt requires" } */
+  return __builtin_vec_scalar_cmp_exp_lt (exponent1, exponent2);	/* { dg-error "builtin function '__builtin_vsx_scalar_cmp_exp_dp_lt' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-unordered-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-unordered-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-cmp-exp-unordered-2.c	(working copy)
@@ -12,5 +12,5 @@  compare_exponents_unordered (double *exponent1_p,
   double exponent1 = *exponent1_p;
   double exponent2 = *exponent2_p;
 
-  return __builtin_vec_scalar_cmp_exp_unordered (exponent1, exponent2);	/* { dg-error "builtin function __builtin_vsx_scalar_cmp_exp_dp_unordered requires" } */
+  return __builtin_vec_scalar_cmp_exp_unordered (exponent1, exponent2);	/* { dg-error "builtin function '__builtin_vsx_scalar_cmp_exp_dp_unordered' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-1.c	(working copy)
@@ -12,7 +12,7 @@  get_exponent (double *p)
 {
   double source = *p;
 
-  return __builtin_vec_scalar_extract_exp (source); /* { dg-error "builtin function __builtin_vsx_scalar_extract_exp requires" } */
+  return __builtin_vec_scalar_extract_exp (source); /* { dg-error "builtin function '__builtin_vsx_scalar_extract_exp' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-2.c	(working copy)
@@ -15,7 +15,7 @@  get_exponent (double *p)
 {
   double source = *p;
 
-  return scalar_extract_exp (source);	/* { dg-error "builtin function __builtin_vec_scalar_extract_exp not supported in this compiler configuration" } */
+  return scalar_extract_exp (source);	/* { dg-error "builtin function '__builtin_vec_scalar_extract_exp' not supported in this compiler configuration" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-4.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-4.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-4.c	(working copy)
@@ -12,7 +12,7 @@  get_exponent (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return __builtin_vec_scalar_extract_exp (source); /* { dg-error "builtin function __builtin_vsx_scalar_extract_expq requires" } */
+  return __builtin_vec_scalar_extract_exp (source); /* { dg-error "builtin function '__builtin_vsx_scalar_extract_expq' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-5.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-5.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-exp-5.c	(working copy)
@@ -15,7 +15,7 @@  get_exponent (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return scalar_extract_exp (source);	/* { dg-error "builtin function __builtin_vec_scalar_extract_exp not supported in this compiler configuration" } */
+  return scalar_extract_exp (source);	/* { dg-error "builtin function '__builtin_vec_scalar_extract_exp' not supported in this compiler configuration" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-1.c	(working copy)
@@ -12,5 +12,5 @@  get_significand (double *p)
 {
   double source = *p;
 
-  return __builtin_vec_scalar_extract_sig (source);	/* { dg-error "builtin function __builtin_vsx_scalar_extract_sig requires" } */
+  return __builtin_vec_scalar_extract_sig (source);	/* { dg-error "builtin function '__builtin_vsx_scalar_extract_sig' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c	(working copy)
@@ -13,5 +13,5 @@  get_significand (double *p)
 {
   double source = *p;
 
-  return __builtin_vec_scalar_extract_sig (source); /* { dg-error "builtin function __builtin_vec_scalar_extract_sig not supported in this compiler configuration" } */
+  return __builtin_vec_scalar_extract_sig (source); /* { dg-error "builtin function '__builtin_vec_scalar_extract_sig' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-4.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-4.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-4.c	(working copy)
@@ -12,5 +12,5 @@  get_significand (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return __builtin_vec_scalar_extract_sig (source);	/* { dg-error "builtin function __builtin_vsx_scalar_extract_sigq requires" } */
+  return __builtin_vec_scalar_extract_sig (source);	/* { dg-error "builtin function '__builtin_vsx_scalar_extract_sigq' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-5.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-5.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-5.c	(working copy)
@@ -13,5 +13,5 @@  get_significand (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return __builtin_vec_scalar_extract_sig (source); /* { dg-error "builtin function __builtin_vec_scalar_extract_sig not supported in this compiler configuration" } */
+  return __builtin_vec_scalar_extract_sig (source); /* { dg-error "builtin function '__builtin_vec_scalar_extract_sig' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-1.c	(working copy)
@@ -14,5 +14,5 @@  insert_exponent (unsigned long long int *significa
   unsigned long long int significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vsx_scalar_insert_exp requires" } */
+  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vsx_scalar_insert_exp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-10.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-10.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-10.c	(working copy)
@@ -14,5 +14,5 @@  insert_exponent (__ieee128 *significand_p,
   __ieee128 significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vsx_scalar_insert_exp_qp requires" } */
+  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vsx_scalar_insert_exp_qp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-11.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-11.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-11.c	(working copy)
@@ -17,5 +17,5 @@  insert_exponent (__ieee128 *significand_p,
   __ieee128 significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vec_scalar_insert_exp not supported in this compiler configuration" } */
+  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vec_scalar_insert_exp' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c	(working copy)
@@ -17,5 +17,5 @@  insert_exponent (unsigned long long int *significa
   unsigned long long int significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vec_scalar_insert_exp not supported in this compiler configuration" } */
+  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vec_scalar_insert_exp' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-4.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-4.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-4.c	(working copy)
@@ -14,5 +14,5 @@  insert_exponent (double *significand_p,
   double significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vsx_scalar_insert_exp_dp requires" } */
+  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vsx_scalar_insert_exp_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c	(working copy)
@@ -17,5 +17,5 @@  insert_exponent (double *significand_p,
   double significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vec_scalar_insert_exp not supported in this compiler configuration" } */
+  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vec_scalar_insert_exp' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-7.c	(working copy)
@@ -14,5 +14,5 @@  insert_exponent (unsigned __int128 *significand_p,
   unsigned __int128 significand = *significand_p;
   unsigned long long int exponent = *exponent_p;
 
-  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vsx_scalar_insert_exp_q requires" } */
+  return __builtin_vec_scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vsx_scalar_insert_exp_q' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-8.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-8.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-8.c	(working copy)
@@ -17,5 +17,5 @@  insert_exponent (unsigned __int128 *significand_p,
   unsigned __int128 significand = *significand_p;  /* { dg-error "'__int128' is not supported on this target" } */
   unsigned long long int exponent = *exponent_p;
 
-  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function __builtin_vec_scalar_insert_exp not supported in this compiler configuration" } */
+  return scalar_insert_exp (significand, exponent); /* { dg-error "builtin function '__builtin_vec_scalar_insert_exp' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-11.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-11.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-11.c	(working copy)
@@ -11,5 +11,5 @@  test_data_class (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function __builtin_vsx_scalar_test_data_class_qp requires" } */
+  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function '__builtin_vsx_scalar_test_data_class_qp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-6.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-6.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-6.c	(working copy)
@@ -11,5 +11,5 @@  test_data_class (double *p)
 {
   double source = *p;
 
-  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function __builtin_vsx_scalar_test_data_class_dp requires" } */
+  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function '__builtin_vsx_scalar_test_data_class_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-data-class-7.c	(working copy)
@@ -11,5 +11,5 @@  test_data_class (float *p)
 {
   float source = *p;
 
-  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function __builtin_vsx_scalar_test_data_class_sp requires" } */
+  return __builtin_vec_scalar_test_data_class (source, 3); /* { dg-error "builtin function '__builtin_vsx_scalar_test_data_class_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-2.c	(working copy)
@@ -11,5 +11,5 @@  test_neg (float *p)
 {
   float source = *p;
 
-  return __builtin_vec_scalar_test_neg_sp (source); /* { dg-error "builtin function __builtin_vsx_scalar_test_neg_sp requires" } */
+  return __builtin_vec_scalar_test_neg_sp (source); /* { dg-error "builtin function '__builtin_vsx_scalar_test_neg_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-3.c	(working copy)
@@ -11,5 +11,5 @@  test_neg (double *p)
 {
   double source = *p;
 
-  return __builtin_vec_scalar_test_neg_dp (source); /* { dg-error "builtin function __builtin_vsx_scalar_test_neg_dp requires" } */
+  return __builtin_vec_scalar_test_neg_dp (source); /* { dg-error "builtin function '__builtin_vsx_scalar_test_neg_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-5.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-5.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/scalar-test-neg-5.c	(working copy)
@@ -11,5 +11,5 @@  test_neg (__ieee128 *p)
 {
   __ieee128 source = *p;
 
-  return __builtin_vec_scalar_test_neg_qp (source); /* { dg-error "builtin function __builtin_vsx_scalar_test_neg_qp requires" } */
+  return __builtin_vec_scalar_test_neg_qp (source); /* { dg-error "builtin function '__builtin_vsx_scalar_test_neg_qp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-2.c	(working copy)
@@ -10,5 +10,5 @@  get_exponents (__vector double *p)
 {
   __vector double source = *p;
 
-  return __builtin_vec_extract_exp (source); /* { dg-error "builtin function __builtin_vsx_extract_exp_dp requires" } */
+  return __builtin_vec_extract_exp (source); /* { dg-error "builtin function '__builtin_vsx_extract_exp_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-exp-3.c	(working copy)
@@ -10,5 +10,5 @@  get_exponents (__vector float *p)
 {
   __vector float source = *p;
 
-  return __builtin_vec_extract_exp (source);	/* { dg-error "builtin function __builtin_vsx_extract_exp_sp requires" } */
+  return __builtin_vec_extract_exp (source);	/* { dg-error "builtin function '__builtin_vsx_extract_exp_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-2.c	(working copy)
@@ -10,5 +10,5 @@  get_significands (__vector double *p)
 {
   __vector double source = *p;
 
-  return __builtin_vec_extract_sig (source);	/* { dg-error "builtin function __builtin_vsx_extract_sig_dp requires" } */
+  return __builtin_vec_extract_sig (source);	/* { dg-error "builtin function '__builtin_vsx_extract_sig_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-extract-sig-3.c	(working copy)
@@ -10,5 +10,5 @@  get_significands (__vector float *p)
 {
   __vector float source = *p;
 
-  return __builtin_vec_extract_sig (source);	/* { dg-error "builtin function __builtin_vsx_extract_sig_sp requires" } */
+  return __builtin_vec_extract_sig (source);	/* { dg-error "builtin function '__builtin_vsx_extract_sig_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-2.c	(working copy)
@@ -12,5 +12,5 @@  make_floats (__vector unsigned int *significands_p
   __vector unsigned int significands = *significands_p;
   __vector unsigned int exponents = *exponents_p;
 
-  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function __builtin_vsx_insert_exp_sp requires" } */
+  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function '__builtin_vsx_insert_exp_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-3.c	(working copy)
@@ -12,5 +12,5 @@  make_doubles (__vector unsigned long long int *sig
   __vector unsigned long long int significands = *significands_p;
   __vector unsigned long long int exponents = *exponents_p;
 
-  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function __builtin_vsx_insert_exp_dp requires" } */
+  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function '__builtin_vsx_insert_exp_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-6.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-6.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-6.c	(working copy)
@@ -12,5 +12,5 @@  make_floats (__vector float *significands_p,
   __vector float significands = *significands_p;
   __vector unsigned int exponents = *exponents_p;
 
-  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function __builtin_vsx_insert_exp_sp requires" } */
+  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function '__builtin_vsx_insert_exp_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-insert-exp-7.c	(working copy)
@@ -12,5 +12,5 @@  make_doubles (__vector double *significands_p,
   __vector double significands = *significands_p;
   __vector unsigned long long int exponents = *exponents_p;
 
-  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function __builtin_vsx_insert_exp_dp requires" } */
+  return __builtin_vec_insert_exp (significands, exponents); /* { dg-error "builtin function '__builtin_vsx_insert_exp_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-2.c	(working copy)
@@ -10,5 +10,5 @@  get_data_class_flags (__vector double *p)
 {
   __vector double source = *p;
 
-  return __builtin_vec_test_data_class (source, 0x37); /* { dg-error "builtin function __builtin_vsx_test_data_class_dp requires" } */
+  return __builtin_vec_test_data_class (source, 0x37); /* { dg-error "builtin function '__builtin_vsx_test_data_class_dp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/bfp/vec-test-data-class-3.c	(working copy)
@@ -10,5 +10,5 @@  get_data_class_flags (__vector float *p)
 {
   __vector float source = *p;
 
-  return __builtin_vec_test_data_class (source, 0x37); /* { dg-error "builtin function __builtin_vsx_test_data_class_sp requires" } */
+  return __builtin_vec_test_data_class (source, 0x37); /* { dg-error "builtin function '__builtin_vsx_test_data_class_sp' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/byte-in-either-range-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/byte-in-either-range-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/byte-in-either-range-1.c	(working copy)
@@ -18,5 +18,5 @@  test_byte_in_either_range (unsigned char b,
   range_encoding = ((first_hi_bound << 24) | (first_lo_bound << 16)
 		    | (second_hi_bound << 8) | second_lo_bound);
 
-  return __builtin_byte_in_either_range (b, range_encoding); /* { dg-error "builtin function __builtin_scalar_byte_in_either_range requires" } */
+  return __builtin_byte_in_either_range (b, range_encoding); /* { dg-error "builtin function '__builtin_scalar_byte_in_either_range' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/byte-in-range-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/byte-in-range-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/byte-in-range-1.c	(working copy)
@@ -11,6 +11,6 @@  test_byte_in_range (unsigned char b,
 		    unsigned char low_range, unsigned char high_range)
 {
   unsigned int range_encoding = (high_range << 8) | low_range;
-  return __builtin_byte_in_range (b, range_encoding); /* { dg-error "builtin function __builtin_scalar_byte_in_range requires" } */
+  return __builtin_byte_in_range (b, range_encoding); /* { dg-error "builtin function '__builtin_scalar_byte_in_range' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/byte-in-set-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/byte-in-set-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/byte-in-set-1.c	(working copy)
@@ -10,5 +10,5 @@ 
 int
 test_byte_in_set (unsigned char b, unsigned long long set_members)
 {
-  return __builtin_byte_in_set (b, set_members); /* { dg-error "builtin function __builtin_scalar_byte_in_set requires" } */
+  return __builtin_byte_in_set (b, set_members); /* { dg-error "builtin function '__builtin_scalar_byte_in_set' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/byte-in-set-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/byte-in-set-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/byte-in-set-2.c	(working copy)
@@ -12,5 +12,5 @@ 
 int
 test_byte_in_set (unsigned char b, unsigned long long set_members)
 {
-  return __builtin_byte_in_set (b, set_members); /* { dg-error "builtin function __builtin_byte_in_set not supported in this compiler configuration" } */
+  return __builtin_byte_in_set (b, set_members); /* { dg-error "builtin function '__builtin_byte_in_set' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/cmpb-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/cmpb-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/cmpb-3.c	(working copy)
@@ -9,7 +9,7 @@  void abort ();
 long long int
 do_compare (long long int a, long long int b)
 {
-  return __builtin_cmpb (a, b);	/* { dg-error "builtin function __builtin_cmpb not supported in this compiler configuration" } */
+  return __builtin_cmpb (a, b);	/* { dg-error "builtin function '__builtin_cmpb' not supported in this compiler configuration" } */
 }
 
 void expect (long long int pattern, long long int value)
Index: gcc/testsuite/gcc.target/powerpc/crypto-builtin-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/crypto-builtin-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/crypto-builtin-2.c	(working copy)
@@ -6,14 +6,14 @@ 
 
 void use_builtins_d (__vector unsigned long long *p, __vector unsigned long long *q, __vector unsigned long long *r, __vector unsigned long long *s)
 {
-  p[0] = __builtin_crypto_vcipher (q[0], r[0]); /* { dg-error "builtin function __builtin_crypto_vcipher is not supported with the current options" } */
-  p[1] = __builtin_crypto_vcipherlast (q[1], r[1]); /* { dg-error "builtin function __builtin_crypto_vcipherlast is not supported with the current options" } */
-  p[2] = __builtin_crypto_vncipher (q[2], r[2]); /* { dg-error "builtin function __builtin_crypto_vncipher is not supported with the current options" } */
-  p[3] = __builtin_crypto_vncipherlast (q[3], r[3]); /* { dg-error "builtin function __builtin_crypto_vncipherlast is not supported with the current options" } */
+  p[0] = __builtin_crypto_vcipher (q[0], r[0]); /* { dg-error "builtin function '__builtin_crypto_vcipher' is not supported with the current options" } */
+  p[1] = __builtin_crypto_vcipherlast (q[1], r[1]); /* { dg-error "builtin function '__builtin_crypto_vcipherlast' is not supported with the current options" } */
+  p[2] = __builtin_crypto_vncipher (q[2], r[2]); /* { dg-error "builtin function '__builtin_crypto_vncipher' is not supported with the current options" } */
+  p[3] = __builtin_crypto_vncipherlast (q[3], r[3]); /* { dg-error "builtin function '__builtin_crypto_vncipherlast' is not supported with the current options" } */
   p[4] = __builtin_crypto_vpermxor (q[4], r[4], s[4]);
   p[5] = __builtin_crypto_vpmsumd (q[5], r[5]);
-  p[6] = __builtin_crypto_vshasigmad (q[6], 1, 15); /* { dg-error "builtin function __builtin_crypto_vshasigmad is not supported with the current options" } */
-  p[7] = __builtin_crypto_vsbox (q[7]); /* { dg-error "builtin function __builtin_crypto_vsbox is not supported with the current options" } */
+  p[6] = __builtin_crypto_vshasigmad (q[6], 1, 15); /* { dg-error "builtin function '__builtin_crypto_vshasigmad' is not supported with the current options" } */
+  p[7] = __builtin_crypto_vsbox (q[7]); /* { dg-error "builtin function '__builtin_crypto_vsbox' is not supported with the current options" } */
 }
 
 void use_builtins_w (__vector unsigned int *p, __vector unsigned int *q, __vector unsigned int *r, __vector unsigned int *s)
@@ -20,7 +20,7 @@  void use_builtins_w (__vector unsigned int *p, __v
 {
   p[0] = __builtin_crypto_vpermxor (q[0], r[0], s[0]);
   p[1] = __builtin_crypto_vpmsumw (q[1], r[1]);
-  p[2] = __builtin_crypto_vshasigmaw (q[2], 1, 15); /* { dg-error "builtin function __builtin_crypto_vshasigmaw is not supported with the current options" } */
+  p[2] = __builtin_crypto_vshasigmaw (q[2], 1, 15); /* { dg-error "builtin function '__builtin_crypto_vshasigmaw' is not supported with the current options" } */
 }
 
 void use_builtins_h (__vector unsigned short *p, __vector unsigned short *q, __vector unsigned short *r, __vector unsigned short *s)
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-1.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_lt (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_lt_dd requires" } */
+  return __builtin_dfp_dtstsfi_lt (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_lt_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-11.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-11.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-11.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_lt_dd (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_lt_dd requires" } */
+  return __builtin_dfp_dtstsfi_lt_dd (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_lt_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-16.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-16.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-16.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_lt_td (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_lt_td requires" } */
+  return __builtin_dfp_dtstsfi_lt_td (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_lt_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-21.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-21.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-21.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_gt (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_gt_dd requires" } */
+  return __builtin_dfp_dtstsfi_gt (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_gt_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-26.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-26.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-26.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_gt (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_gt_td requires" } */
+  return __builtin_dfp_dtstsfi_gt (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_gt_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-31.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-31.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-31.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_gt_dd (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_gt_dd requires" } */
+  return __builtin_dfp_dtstsfi_gt_dd (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_gt_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-36.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-36.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-36.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_gt_td (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_gt_td requires" } */
+  return __builtin_dfp_dtstsfi_gt_td (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_gt_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-41.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-41.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-41.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_eq (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_eq_dd requires" } */
+  return __builtin_dfp_dtstsfi_eq (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_eq_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-46.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-46.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-46.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_eq (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_eq_td requires" } */
+  return __builtin_dfp_dtstsfi_eq (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_eq_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-51.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-51.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-51.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_eq_dd (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_eq_dd requires" } */
+  return __builtin_dfp_dtstsfi_eq_dd (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_eq_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-56.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-56.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-56.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_eq_td (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_eq_td requires" } */
+  return __builtin_dfp_dtstsfi_eq_td (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_eq_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-6.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-6.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-6.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_lt (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_lt_td requires" } */
+  return __builtin_dfp_dtstsfi_lt (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_lt_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-61.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-61.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-61.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_ov (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_ov_dd requires" } */
+  return __builtin_dfp_dtstsfi_ov (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_ov_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-66.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-66.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-66.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_ov (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_ov_td requires" } */
+  return __builtin_dfp_dtstsfi_ov (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_ov_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-71.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-71.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-71.c	(working copy)
@@ -10,6 +10,6 @@  int doTestBCDSignificance (_Decimal64 *p)
 {
   _Decimal64 source = *p;
 
-  return __builtin_dfp_dtstsfi_ov_dd (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_ov_dd requires" } */
+  return __builtin_dfp_dtstsfi_ov_dd (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_ov_dd' requires" } */
 }
 
Index: gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-76.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-76.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/dfp/dtstsfi-76.c	(working copy)
@@ -10,7 +10,7 @@  int doTestBCDSignificance (_Decimal128 *p)
 {
   _Decimal128 source = *p;
 
-  return __builtin_dfp_dtstsfi_ov_td (5, source);	/* { dg-error "builtin function __builtin_dtstsfi_ov_td requires" } */
+  return __builtin_dfp_dtstsfi_ov_td (5, source);	/* { dg-error "builtin function '__builtin_dtstsfi_ov_td' requires" } */
 }
 
 
Index: gcc/testsuite/gcc.target/powerpc/no-r11-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/no-r11-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/no-r11-3.c	(working copy)
@@ -6,7 +6,7 @@ 
 extern void ext_call (int (func) (void));
 
 int
-outer_func (int init)	/* { dg-error "-mno-pointers-to-nested-functions option" } */
+outer_func (int init)	/* { dg-error "'-mno-pointers-to-nested-functions' option" } */
 {
   int value = init;
 
Index: gcc/testsuite/gcc.target/powerpc/pr80098-1.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/pr80098-1.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/pr80098-1.c	(working copy)
@@ -5,5 +5,5 @@ 
 
 int i;
 
-/* { dg-error "-mno-power9-vector turns off -mpower9-minmax" "PR80098" { target *-*-* } 0 } */
-/* { dg-error "-mno-power9-vector turns off -mpower9-dform"  "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-power9-vector' turns off '-mpower9-minmax'" "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-power9-vector' turns off '-mpower9-dform'"  "PR80098" { target *-*-* } 0 } */
Index: gcc/testsuite/gcc.target/powerpc/pr80098-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/pr80098-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/pr80098-2.c	(working copy)
@@ -5,5 +5,5 @@ 
 
 int i;
 
-/* { dg-error "-mno-power8-vector turns off -mdirect-move" "PR80098" { target *-*-* } 0 } */
-/* { dg-error "-mno-power8-vector turns off -mcrypto"      "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-power8-vector' turns off '-mdirect-move'" "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-power8-vector' turns off '-mcrypto'"      "PR80098" { target *-*-* } 0 } */
Index: gcc/testsuite/gcc.target/powerpc/pr80098-3.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/pr80098-3.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/pr80098-3.c	(working copy)
@@ -5,5 +5,5 @@ 
 
 int i;
 
-/* { dg-error "-mno-vsx turns off -mdirect-move" "PR80098" { target *-*-* } 0 } */
-/* { dg-error "-mno-vsx turns off -mcrypto"      "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-vsx' turns off '-mdirect-move'" "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-vsx' turns off '-mcrypto'"      "PR80098" { target *-*-* } 0 } */
Index: gcc/testsuite/gcc.target/powerpc/pr80098-4.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/pr80098-4.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/pr80098-4.c	(working copy)
@@ -5,4 +5,4 @@ 
 
 int i;
 
-/* { dg-error "-mno-vsx turns off -mvsx-timode" "PR80098" { target *-*-* } 0 } */
+/* { dg-error "'-mno-vsx' turns off '-mvsx-timode'" "PR80098" { target *-*-* } 0 } */
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-all-nez-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-all-nez-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-all-nez-7.c	(working copy)
@@ -12,5 +12,5 @@  test_all_not_equal_and_not_zero (vector unsigned s
   vector unsigned short arg_1 = *arg1_p;
   vector unsigned short arg_2 = *arg2_p;
 
-  return __builtin_vec_vcmpnez_p (__CR6_LT, arg_1, arg_2);	/* { dg-error "builtin function __builtin_vec_vcmpnez_p not supported in this compiler configuration" } */
+  return __builtin_vec_vcmpnez_p (__CR6_LT, arg_1, arg_2);	/* { dg-error "builtin function '__builtin_vec_vcmpnez_p' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-any-eqz-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-any-eqz-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-any-eqz-7.c	(working copy)
@@ -11,5 +11,5 @@  test_any_equal (vector unsigned int *arg1_p, vecto
   vector unsigned int arg_1 = *arg1_p;
   vector unsigned int arg_2 = *arg2_p;
 
-  return __builtin_vec_vcmpnez_p (__CR6_LT_REV, arg_1, arg_2);	/* { dg-error "builtin function __builtin_vec_vcmpnez_p not supported in this compiler configuration" } */
+  return __builtin_vec_vcmpnez_p (__CR6_LT_REV, arg_1, arg_2);	/* { dg-error "builtin function '__builtin_vec_vcmpnez_p' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-cmpnez-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-cmpnez-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-cmpnez-7.c	(working copy)
@@ -11,5 +11,5 @@  fetch_data (vector unsigned int *arg1_p, vector un
   vector unsigned int arg_1 = *arg1_p;
   vector unsigned int arg_2 = *arg2_p;
 
-  return __builtin_vec_vcmpnez (arg_1, arg_2);	/* { dg-error "builtin function __builtin_altivec_vcmpnezw requires the -mcpu=power9 option" } */
+  return __builtin_vec_vcmpnez (arg_1, arg_2);	/* { dg-error "builtin function '__builtin_altivec_vcmpnezw' requires the '-mcpu=power9' option" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-cntlz-lsbb-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-cntlz-lsbb-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-cntlz-lsbb-2.c	(working copy)
@@ -10,5 +10,5 @@  count_leading_zero_byte_bits (vector unsigned char
 {
   vector unsigned char arg_1 = *arg1_p;
 
-  return __builtin_vec_vclzlsbb (arg_1);	/* { dg-error "builtin function __builtin_altivec_vclzlsbb requires the -mcpu=power9 option" } */
+  return __builtin_vec_vclzlsbb (arg_1);	/* { dg-error "builtin function '__builtin_altivec_vclzlsbb' requires the '-mcpu=power9' option" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-cnttz-lsbb-2.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-cnttz-lsbb-2.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-cnttz-lsbb-2.c	(working copy)
@@ -10,5 +10,5 @@  count_trailing_zero_byte_bits (vector unsigned cha
 {
   vector unsigned char arg_1 = *arg1_p;
 
-  return __builtin_vec_vctzlsbb (arg_1);	/* { dg-error "builtin function __builtin_altivec_vctzlsbb requires the -mcpu=power9 option" } */
+  return __builtin_vec_vctzlsbb (arg_1);	/* { dg-error "builtin function '__builtin_altivec_vctzlsbb' requires the '-mcpu=power9' option" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-12.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-12.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-12.c	(working copy)
@@ -12,5 +12,5 @@ 
 __vector float
 fetch_data (float *address, size_t length)
 {
-  return __builtin_vec_lxvl (address, length); /* { dg-error "builtin function __builtin_vsx_lxvl requires" } */
+  return __builtin_vec_lxvl (address, length); /* { dg-error "builtin function '__builtin_vsx_lxvl' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-13.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-13.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xl-len-13.c	(working copy)
@@ -14,5 +14,5 @@ 
 __vector float
 fetch_data (float *address, size_t length)
 {
-  return __builtin_vec_lxvl (address, length);	/* { dg-error "builtin function __builtin_vec_lxvl not supported in this compiler configuration" } */
+  return __builtin_vec_lxvl (address, length);	/* { dg-error "builtin function '__builtin_vec_lxvl' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xlx-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xlx-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xlx-7.c	(working copy)
@@ -11,5 +11,5 @@  fetch_data (unsigned int offset, vector signed int
 {
   vector signed int data = *datap;
 
-  return __builtin_vec_vextulx (offset, data);	/* { dg-error "builtin function __builtin_altivec_vextuwlx requires" } */
+  return __builtin_vec_vextulx (offset, data);	/* { dg-error "builtin function '__builtin_altivec_vextuwlx' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xrx-7.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xrx-7.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xrx-7.c	(working copy)
@@ -11,5 +11,5 @@  fetch_data (unsigned short offset, vector signed s
 {
   vector signed short data = *datap;
 
-  return __builtin_vec_vexturx (offset, data);	/* { dg-error "builtin function __builtin_altivec_vextuhrx requires" } */
+  return __builtin_vec_vexturx (offset, data);	/* { dg-error "builtin function '__builtin_altivec_vextuhrx' requires" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-12.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-12.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-12.c	(working copy)
@@ -14,5 +14,5 @@  store_data (vector double *datap, double *address,
 {
   vector double data = *datap;
 
-  __builtin_vec_stxvl (data, address, length); /* { dg-error "builtin function __builtin_vec_stxvl not supported in this compiler configuration" } */
+  __builtin_vec_stxvl (data, address, length); /* { dg-error "builtin function '__builtin_vec_stxvl' not supported in this compiler configuration" } */
 }
Index: gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-13.c
===================================================================
--- gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-13.c	(revision 250965)
+++ gcc/testsuite/gcc.target/powerpc/vsu/vec-xst-len-13.c	(working copy)
@@ -15,5 +15,5 @@  store_data (vector double *datap, double *address,
 {
   vector double data = *datap;
 
-  __builtin_vec_stxvl (data, address, length); /* { dg-error "builtin function __builtin_altivec_stxvl requires" } */
+  __builtin_vec_stxvl (data, address, length); /* { dg-error "builtin function '__builtin_altivec_stxvl' requires" } */
 }