| Message ID | 1500464893-11352-11-git-send-email-absahu@codeaurora.org |
|---|---|
| State | Accepted |
| Delegated to: | Boris Brezillon |
| Headers | show |
On 07/19/2017 05:17 PM, Abhishek Sahu wrote: > This is reorganization of exiting code and will not change any > functionality. The NAND controller supports multiple NAND device > with different page size. The subsequent patch allocate memory > which depends upon the maximum number of codewords so this patch > reorganizes the NAND device probing. First the ONFI parameter > page will be read from each connected device followed by MTD > device registration. > Modified the commit message slightly so that it's more clear. Looks good otherwise. "The NAND controller can support multiple NAND devices having different page sizes. Future code will require us to allocate memory based on the maximum number of codewords among all the devices. We reorganize the NAND device probing such that the ONFI parameters are first read for each connected device to identify the maximum number of codewords possible, and only then proceed with MTD device registration (i.e, call nand_scan_tail and mtd_device_register). This is a reorganization of the existing code and will not change any functionality." Thanks, Archit > Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> > --- > drivers/mtd/nand/qcom_nandc.c | 88 +++++++++++++++++++++++++++++-------------- > 1 file changed, 59 insertions(+), 29 deletions(-) > > diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c > index 7ecd0f8..8f9e86c 100644 > --- a/drivers/mtd/nand/qcom_nandc.c > +++ b/drivers/mtd/nand/qcom_nandc.c > @@ -2059,14 +2059,67 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc, > return ret; > > ret = qcom_nand_host_setup(host); > - if (ret) > - return ret; > + > + return ret; > +} > + > +static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc, > + struct qcom_nand_host *host, > + struct device_node *dn) > +{ > + struct nand_chip *chip = &host->chip; > + struct mtd_info *mtd = nand_to_mtd(chip); > + int ret; > > ret = nand_scan_tail(mtd); > if (ret) > return ret; > > - return mtd_device_register(mtd, NULL, 0); > + ret = mtd_device_register(mtd, NULL, 0); > + if (ret) > + nand_cleanup(mtd_to_nand(mtd)); > + > + return ret; > +} > + > +static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) > +{ > + struct device *dev = nandc->dev; > + struct device_node *dn = dev->of_node, *child; > + struct qcom_nand_host *host, *tmp; > + int ret; > + > + for_each_available_child_of_node(dn, child) { > + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); > + if (!host) { > + of_node_put(child); > + return -ENOMEM; > + } > + > + ret = qcom_nand_host_init(nandc, host, child); > + if (ret) { > + devm_kfree(dev, host); > + continue; > + } > + > + list_add_tail(&host->node, &nandc->host_list); > + } > + > + if (list_empty(&nandc->host_list)) > + return -ENODEV; > + > + list_for_each_entry_safe(host, tmp, &nandc->host_list, node) { > + ret = qcom_nand_mtd_register(nandc, host, child); > + if (ret) { > + list_del(&host->node); > + devm_kfree(dev, host); > + } > + } > + > + if (list_empty(&nandc->host_list)) > + return -ENODEV; > + > + return 0; > } > > /* parse custom DT properties here */ > @@ -2094,10 +2147,8 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) > static int qcom_nandc_probe(struct platform_device *pdev) > { > struct qcom_nand_controller *nandc; > - struct qcom_nand_host *host; > const void *dev_data; > struct device *dev = &pdev->dev; > - struct device_node *dn = dev->of_node, *child; > struct resource *res; > int ret; > > @@ -2151,33 +2202,12 @@ static int qcom_nandc_probe(struct platform_device *pdev) > if (ret) > goto err_setup; > > - for_each_available_child_of_node(dn, child) { > - host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); > - if (!host) { > - of_node_put(child); > - ret = -ENOMEM; > - goto err_cs_init; > - } > - > - ret = qcom_nand_host_init(nandc, host, child); > - if (ret) { > - devm_kfree(dev, host); > - continue; > - } > - > - list_add_tail(&host->node, &nandc->host_list); > - } > - > - if (list_empty(&nandc->host_list)) { > - ret = -ENODEV; > - goto err_cs_init; > - } > + ret = qcom_probe_nand_devices(nandc); > + if (ret) > + goto err_setup; > > return 0; > > -err_cs_init: > - list_for_each_entry(host, &nandc->host_list, node) > - nand_release(nand_to_mtd(&host->chip)); > err_setup: > clk_disable_unprepare(nandc->aon_clk); > err_aon_clk: >
On 2017-08-02 13:51, Archit Taneja wrote: > On 07/19/2017 05:17 PM, Abhishek Sahu wrote: >> This is reorganization of exiting code and will not change any >> functionality. The NAND controller supports multiple NAND device >> with different page size. The subsequent patch allocate memory >> which depends upon the maximum number of codewords so this patch >> reorganizes the NAND device probing. First the ONFI parameter >> page will be read from each connected device followed by MTD >> device registration. >> > > Modified the commit message slightly so that it's more clear. > Looks good otherwise. > > "The NAND controller can support multiple NAND devices having different > page sizes. Future code will require us to allocate memory based on the > maximum number of codewords among all the devices. We reorganize the > NAND > device probing such that the ONFI parameters are first read for each > connected device to identify the maximum number of codewords possible, > and only then proceed with MTD device registration (i.e, call > nand_scan_tail > and mtd_device_register). > > This is a reorganization of the existing code and will not change > any functionality." > > Thanks, > Archit Thanks for making it more clear. I will amend the commit message in v3. > >> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> >> --- >> drivers/mtd/nand/qcom_nandc.c | 88 >> +++++++++++++++++++++++++++++-------------- >> 1 file changed, 59 insertions(+), 29 deletions(-) >> >> diff --git a/drivers/mtd/nand/qcom_nandc.c >> b/drivers/mtd/nand/qcom_nandc.c >> index 7ecd0f8..8f9e86c 100644 >> --- a/drivers/mtd/nand/qcom_nandc.c >> +++ b/drivers/mtd/nand/qcom_nandc.c >> @@ -2059,14 +2059,67 @@ static int qcom_nand_host_init(struct >> qcom_nand_controller *nandc, >> return ret; >> ret = qcom_nand_host_setup(host); >> - if (ret) >> - return ret; >> + >> + return ret; >> +} >> + >> +static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc, >> + struct qcom_nand_host *host, >> + struct device_node *dn) >> +{ >> + struct nand_chip *chip = &host->chip; >> + struct mtd_info *mtd = nand_to_mtd(chip); >> + int ret; >> ret = nand_scan_tail(mtd); >> if (ret) >> return ret; >> - return mtd_device_register(mtd, NULL, 0); >> + ret = mtd_device_register(mtd, NULL, 0); >> + if (ret) >> + nand_cleanup(mtd_to_nand(mtd)); >> + >> + return ret; >> +} >> + >> +static int qcom_probe_nand_devices(struct qcom_nand_controller >> *nandc) >> +{ >> + struct device *dev = nandc->dev; >> + struct device_node *dn = dev->of_node, *child; >> + struct qcom_nand_host *host, *tmp; >> + int ret; >> + >> + for_each_available_child_of_node(dn, child) { >> + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); >> + if (!host) { >> + of_node_put(child); >> + return -ENOMEM; >> + } >> + >> + ret = qcom_nand_host_init(nandc, host, child); >> + if (ret) { >> + devm_kfree(dev, host); >> + continue; >> + } >> + >> + list_add_tail(&host->node, &nandc->host_list); >> + } >> + >> + if (list_empty(&nandc->host_list)) >> + return -ENODEV; >> + >> + list_for_each_entry_safe(host, tmp, &nandc->host_list, node) { >> + ret = qcom_nand_mtd_register(nandc, host, child); >> + if (ret) { >> + list_del(&host->node); >> + devm_kfree(dev, host); >> + } >> + } >> + >> + if (list_empty(&nandc->host_list)) >> + return -ENODEV; >> + >> + return 0; >> } >> /* parse custom DT properties here */ >> @@ -2094,10 +2147,8 @@ static int qcom_nandc_parse_dt(struct >> platform_device *pdev) >> static int qcom_nandc_probe(struct platform_device *pdev) >> { >> struct qcom_nand_controller *nandc; >> - struct qcom_nand_host *host; >> const void *dev_data; >> struct device *dev = &pdev->dev; >> - struct device_node *dn = dev->of_node, *child; >> struct resource *res; >> int ret; >> @@ -2151,33 +2202,12 @@ static int qcom_nandc_probe(struct >> platform_device *pdev) >> if (ret) >> goto err_setup; >> - for_each_available_child_of_node(dn, child) { >> - host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); >> - if (!host) { >> - of_node_put(child); >> - ret = -ENOMEM; >> - goto err_cs_init; >> - } >> - >> - ret = qcom_nand_host_init(nandc, host, child); >> - if (ret) { >> - devm_kfree(dev, host); >> - continue; >> - } >> - >> - list_add_tail(&host->node, &nandc->host_list); >> - } >> - >> - if (list_empty(&nandc->host_list)) { >> - ret = -ENODEV; >> - goto err_cs_init; >> - } >> + ret = qcom_probe_nand_devices(nandc); >> + if (ret) >> + goto err_setup; >> return 0; >> -err_cs_init: >> - list_for_each_entry(host, &nandc->host_list, node) >> - nand_release(nand_to_mtd(&host->chip)); >> err_setup: >> clk_disable_unprepare(nandc->aon_clk); >> err_aon_clk: >>
On Wed, 2 Aug 2017 13:51:45 +0530 Archit Taneja <architt@codeaurora.org> wrote: > On 07/19/2017 05:17 PM, Abhishek Sahu wrote: > > This is reorganization of exiting code and will not change any > > functionality. The NAND controller supports multiple NAND device > > with different page size. The subsequent patch allocate memory > > which depends upon the maximum number of codewords so this patch > > reorganizes the NAND device probing. First the ONFI parameter > > page will be read from each connected device followed by MTD > > device registration. > > > > Modified the commit message slightly so that it's more clear. > Looks good otherwise. > > "The NAND controller can support multiple NAND devices having different > page sizes. Future code will require us to allocate memory based on the > maximum number of codewords among all the devices. We reorganize the NAND > device probing such that the ONFI parameters are first read for each > connected device to identify the maximum number of codewords possible, > and only then proceed with MTD device registration (i.e, call nand_scan_tail > and mtd_device_register). > > This is a reorganization of the existing code and will not change > any functionality." Applied after modifying the commit message as suggested by Archit. Thanks, Boris > > Thanks, > Archit > > > Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> > > --- > > drivers/mtd/nand/qcom_nandc.c | 88 +++++++++++++++++++++++++++++-------------- > > 1 file changed, 59 insertions(+), 29 deletions(-) > > > > diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c > > index 7ecd0f8..8f9e86c 100644 > > --- a/drivers/mtd/nand/qcom_nandc.c > > +++ b/drivers/mtd/nand/qcom_nandc.c > > @@ -2059,14 +2059,67 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc, > > return ret; > > > > ret = qcom_nand_host_setup(host); > > - if (ret) > > - return ret; > > + > > + return ret; > > +} > > + > > +static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc, > > + struct qcom_nand_host *host, > > + struct device_node *dn) > > +{ > > + struct nand_chip *chip = &host->chip; > > + struct mtd_info *mtd = nand_to_mtd(chip); > > + int ret; > > > > ret = nand_scan_tail(mtd); > > if (ret) > > return ret; > > > > - return mtd_device_register(mtd, NULL, 0); > > + ret = mtd_device_register(mtd, NULL, 0); > > + if (ret) > > + nand_cleanup(mtd_to_nand(mtd)); > > + > > + return ret; > > +} > > + > > +static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) > > +{ > > + struct device *dev = nandc->dev; > > + struct device_node *dn = dev->of_node, *child; > > + struct qcom_nand_host *host, *tmp; > > + int ret; > > + > > + for_each_available_child_of_node(dn, child) { > > + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); > > + if (!host) { > > + of_node_put(child); > > + return -ENOMEM; > > + } > > + > > + ret = qcom_nand_host_init(nandc, host, child); > > + if (ret) { > > + devm_kfree(dev, host); > > + continue; > > + } > > + > > + list_add_tail(&host->node, &nandc->host_list); > > + } > > + > > + if (list_empty(&nandc->host_list)) > > + return -ENODEV; > > + > > + list_for_each_entry_safe(host, tmp, &nandc->host_list, node) { > > + ret = qcom_nand_mtd_register(nandc, host, child); > > + if (ret) { > > + list_del(&host->node); > > + devm_kfree(dev, host); > > + } > > + } > > + > > + if (list_empty(&nandc->host_list)) > > + return -ENODEV; > > + > > + return 0; > > } > > > > /* parse custom DT properties here */ > > @@ -2094,10 +2147,8 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) > > static int qcom_nandc_probe(struct platform_device *pdev) > > { > > struct qcom_nand_controller *nandc; > > - struct qcom_nand_host *host; > > const void *dev_data; > > struct device *dev = &pdev->dev; > > - struct device_node *dn = dev->of_node, *child; > > struct resource *res; > > int ret; > > > > @@ -2151,33 +2202,12 @@ static int qcom_nandc_probe(struct platform_device *pdev) > > if (ret) > > goto err_setup; > > > > - for_each_available_child_of_node(dn, child) { > > - host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); > > - if (!host) { > > - of_node_put(child); > > - ret = -ENOMEM; > > - goto err_cs_init; > > - } > > - > > - ret = qcom_nand_host_init(nandc, host, child); > > - if (ret) { > > - devm_kfree(dev, host); > > - continue; > > - } > > - > > - list_add_tail(&host->node, &nandc->host_list); > > - } > > - > > - if (list_empty(&nandc->host_list)) { > > - ret = -ENODEV; > > - goto err_cs_init; > > - } > > + ret = qcom_probe_nand_devices(nandc); > > + if (ret) > > + goto err_setup; > > > > return 0; > > > > -err_cs_init: > > - list_for_each_entry(host, &nandc->host_list, node) > > - nand_release(nand_to_mtd(&host->chip)); > > err_setup: > > clk_disable_unprepare(nandc->aon_clk); > > err_aon_clk: > > >
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index 7ecd0f8..8f9e86c 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -2059,14 +2059,67 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc, return ret; ret = qcom_nand_host_setup(host); - if (ret) - return ret; + + return ret; +} + +static int qcom_nand_mtd_register(struct qcom_nand_controller *nandc, + struct qcom_nand_host *host, + struct device_node *dn) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; ret = nand_scan_tail(mtd); if (ret) return ret; - return mtd_device_register(mtd, NULL, 0); + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + nand_cleanup(mtd_to_nand(mtd)); + + return ret; +} + +static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) +{ + struct device *dev = nandc->dev; + struct device_node *dn = dev->of_node, *child; + struct qcom_nand_host *host, *tmp; + int ret; + + for_each_available_child_of_node(dn, child) { + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + of_node_put(child); + return -ENOMEM; + } + + ret = qcom_nand_host_init(nandc, host, child); + if (ret) { + devm_kfree(dev, host); + continue; + } + + list_add_tail(&host->node, &nandc->host_list); + } + + if (list_empty(&nandc->host_list)) + return -ENODEV; + + list_for_each_entry_safe(host, tmp, &nandc->host_list, node) { + ret = qcom_nand_mtd_register(nandc, host, child); + if (ret) { + list_del(&host->node); + devm_kfree(dev, host); + } + } + + if (list_empty(&nandc->host_list)) + return -ENODEV; + + return 0; } /* parse custom DT properties here */ @@ -2094,10 +2147,8 @@ static int qcom_nandc_parse_dt(struct platform_device *pdev) static int qcom_nandc_probe(struct platform_device *pdev) { struct qcom_nand_controller *nandc; - struct qcom_nand_host *host; const void *dev_data; struct device *dev = &pdev->dev; - struct device_node *dn = dev->of_node, *child; struct resource *res; int ret; @@ -2151,33 +2202,12 @@ static int qcom_nandc_probe(struct platform_device *pdev) if (ret) goto err_setup; - for_each_available_child_of_node(dn, child) { - host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); - if (!host) { - of_node_put(child); - ret = -ENOMEM; - goto err_cs_init; - } - - ret = qcom_nand_host_init(nandc, host, child); - if (ret) { - devm_kfree(dev, host); - continue; - } - - list_add_tail(&host->node, &nandc->host_list); - } - - if (list_empty(&nandc->host_list)) { - ret = -ENODEV; - goto err_cs_init; - } + ret = qcom_probe_nand_devices(nandc); + if (ret) + goto err_setup; return 0; -err_cs_init: - list_for_each_entry(host, &nandc->host_list, node) - nand_release(nand_to_mtd(&host->chip)); err_setup: clk_disable_unprepare(nandc->aon_clk); err_aon_clk:
This is reorganization of exiting code and will not change any functionality. The NAND controller supports multiple NAND device with different page size. The subsequent patch allocate memory which depends upon the maximum number of codewords so this patch reorganizes the NAND device probing. First the ONFI parameter page will be read from each connected device followed by MTD device registration. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> --- drivers/mtd/nand/qcom_nandc.c | 88 +++++++++++++++++++++++++++++-------------- 1 file changed, 59 insertions(+), 29 deletions(-)