Message ID | 20170721231140.136461-21-sjg@chromium.org |
---|---|
State | Changes Requested |
Delegated to: | Tom Rini |
Headers | show |
Hi Simon, On Sat, Jul 22, 2017 at 7:11 AM, Simon Glass <sjg@chromium.org> wrote: > This converts the following to Kconfig: > CONFIG_CMD_SCSI > > Signed-off-by: Simon Glass <sjg@chromium.org> > --- > > arch/arm/Kconfig | 3 +++ > cmd/Kconfig | 9 +++++++++ > cmd/Makefile | 2 +- > configs/cl-som-am57x_defconfig | 1 + > configs/controlcenterdc_defconfig | 1 + > configs/ls1012aqds_qspi_defconfig | 1 + > include/configs/cl-som-am57x.h | 1 - > include/configs/controlcenterdc.h | 1 - > include/configs/ls1012aqds.h | 1 - > include/configs/ls1012ardb.h | 1 - > include/configs/ls1021aiot.h | 1 - > include/configs/ls1043ardb.h | 1 - > scripts/config_whitelist.txt | 1 - > 13 files changed, 16 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index c3c389298d..3cc252ac27 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -878,6 +878,7 @@ config TARGET_LS1012ARDB > select ARM64 > select BOARD_LATE_INIT > imply SCSI > + imply CMD_SCSI > help > Support for Freescale LS1012ARDB platform. > The LS1012A Reference design board (RDB) is a high-performance > @@ -931,6 +932,7 @@ config TARGET_LS1021AIOT > select ARCH_LS1021A > select ARCH_SUPPORT_PSCI > imply SCSI > + imply CMD_SCSI > help > Support for Freescale LS1021AIOT platform. > The LS1021A Freescale board (IOT) is a high-performance > @@ -958,6 +960,7 @@ config TARGET_LS1043ARDB > select SUPPORT_SPL > select BOARD_EARLY_INIT_F > imply SCSI > + imply CMD_SCSI > help > Support for Freescale LS1043ARDB platform. > > diff --git a/cmd/Kconfig b/cmd/Kconfig > index 4be801cdfe..ce1a358e08 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -1289,6 +1289,15 @@ config CMD_REISER > reiserls - list files > reiserload - load a file > > +config CMD_SCSI > + bool "scsi - Access to SCSI devices" > + select SCSI > + help > + This provides a 'scsi' command which provides access to SCSI (Small > + Computer System Interface) devices. The command provides a way to > + scan the bus, reset the bus, read and write data and get information > + about devices. > + > endmenu > > menu "Debug commands" > diff --git a/cmd/Makefile b/cmd/Makefile > index eff6bd678f..a85fe25dda 100644 > --- a/cmd/Makefile > +++ b/cmd/Makefile > @@ -106,7 +106,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o > obj-$(CONFIG_SANDBOX) += host.o > obj-$(CONFIG_CMD_SATA) += sata.o > obj-$(CONFIG_CMD_SF) += sf.o > -obj-$(CONFIG_SCSI) += scsi.o disk.o > +obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o This looks odd. I remember you have another patch previously that split CMD_SCSI from SCSI itself. > obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o > obj-$(CONFIG_CMD_SETEXPR) += setexpr.o > obj-$(CONFIG_CMD_SPI) += spi.o > diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig > index 2f1863f1ee..10c10f2387 100644 > --- a/configs/cl-som-am57x_defconfig > +++ b/configs/cl-som-am57x_defconfig > @@ -32,6 +32,7 @@ CONFIG_CMD_EXT4=y > CONFIG_CMD_EXT4_WRITE=y > CONFIG_CMD_FAT=y > CONFIG_CMD_FS_GENERIC=y > +CONFIG_CMD_SCSI=y > CONFIG_ISO_PARTITION=y > CONFIG_CMD_PCA953X=y > CONFIG_LED_STATUS=y > diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig > index c7102810a3..01db848b4e 100644 > --- a/configs/controlcenterdc_defconfig > +++ b/configs/controlcenterdc_defconfig > @@ -32,6 +32,7 @@ CONFIG_CMD_TIME=y > CONFIG_CMD_TPM=y > CONFIG_CMD_EXT2=y > CONFIG_CMD_EXT4=y > +CONFIG_CMD_SCSI=y > CONFIG_EFI_PARTITION=y > CONFIG_OF_BOARD_FIXUP=y > CONFIG_SPL_OF_TRANSLATE=y > diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig > index ea8e262317..c8864fa7b0 100644 > --- a/configs/ls1012aqds_qspi_defconfig > +++ b/configs/ls1012aqds_qspi_defconfig > @@ -28,6 +28,7 @@ CONFIG_CMD_CACHE=y > CONFIG_CMD_DATE=y > CONFIG_CMD_EXT2=y > CONFIG_CMD_FAT=y > +CONFIG_CMD_SCSI=y > CONFIG_OF_CONTROL=y > CONFIG_NET_RANDOM_ETHADDR=y > CONFIG_DM=y > diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h > index ecc87fb6d2..d4a28a597c 100644 > --- a/include/configs/cl-som-am57x.h > +++ b/include/configs/cl-som-am57x.h > @@ -65,7 +65,6 @@ > > #ifndef CONFIG_SPL_BUILD > /* SATA */ > -#define CONFIG_CMD_SCSI > #define CONFIG_LIBATA > #define CONFIG_SCSI_AHCI > #define CONFIG_SCSI_AHCI_PLAT > diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h > index 09af7829ca..a9beb80c92 100644 > --- a/include/configs/controlcenterdc.h > +++ b/include/configs/controlcenterdc.h > @@ -33,7 +33,6 @@ > * Commands configuration > */ > #define CONFIG_CMD_I2C > -#define CONFIG_CMD_SCSI > #define CONFIG_CMD_SPI > > /* SPI NOR flash default params, used by sf commands */ > diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h > index 162b866ad5..46cc33deac 100644 > --- a/include/configs/ls1012aqds.h > +++ b/include/configs/ls1012aqds.h > @@ -137,7 +137,6 @@ > #define CONFIG_LIBATA > #define CONFIG_SCSI_AHCI > #define CONFIG_SCSI_AHCI_PLAT > -#define CONFIG_CMD_SCSI > > #define CONFIG_SYS_SATA AHCI_BASE_ADDR > > diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h > index 653837c689..8d7888aec8 100644 > --- a/include/configs/ls1012ardb.h > +++ b/include/configs/ls1012ardb.h > @@ -53,7 +53,6 @@ > #define CONFIG_LIBATA > #define CONFIG_SCSI_AHCI > #define CONFIG_SCSI_AHCI_PLAT > -#define CONFIG_CMD_SCSI > > #define CONFIG_SYS_SATA AHCI_BASE_ADDR > > diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h > index 100b8511ac..9c3133caa8 100644 > --- a/include/configs/ls1021aiot.h > +++ b/include/configs/ls1021aiot.h > @@ -143,7 +143,6 @@ > #define CONFIG_FSL_ESDHC > > /* SATA */ > -#define CONFIG_CMD_SCSI > #define CONFIG_LIBATA > #define CONFIG_SCSI_AHCI > #define CONFIG_SCSI_AHCI_PLAT > diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h > index deae787358..79f2dc2987 100644 > --- a/include/configs/ls1043ardb.h > +++ b/include/configs/ls1043ardb.h > @@ -299,7 +299,6 @@ > #ifndef SPL_NO_SATA > #define CONFIG_LIBATA > #define CONFIG_SCSI_AHCI > -#define CONFIG_CMD_SCSI > #ifndef CONFIG_CMD_EXT2 > #define CONFIG_CMD_EXT2 > #endif > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index a0b39a355f..4949e182c9 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -296,7 +296,6 @@ CONFIG_CM922T_XA10 > CONFIG_CMDLINE_EDITING > CONFIG_CMDLINE_PS_SUPPORT > CONFIG_CMDLINE_TAG > -CONFIG_CMD_SCSI > CONFIG_CMD_SDRAM > CONFIG_CMD_SF_TEST > CONFIG_CMD_SH_ZIMAGEBOOT > -- Regards, Bin
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c3c389298d..3cc252ac27 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -878,6 +878,7 @@ config TARGET_LS1012ARDB select ARM64 select BOARD_LATE_INIT imply SCSI + imply CMD_SCSI help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance @@ -931,6 +932,7 @@ config TARGET_LS1021AIOT select ARCH_LS1021A select ARCH_SUPPORT_PSCI imply SCSI + imply CMD_SCSI help Support for Freescale LS1021AIOT platform. The LS1021A Freescale board (IOT) is a high-performance @@ -958,6 +960,7 @@ config TARGET_LS1043ARDB select SUPPORT_SPL select BOARD_EARLY_INIT_F imply SCSI + imply CMD_SCSI help Support for Freescale LS1043ARDB platform. diff --git a/cmd/Kconfig b/cmd/Kconfig index 4be801cdfe..ce1a358e08 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1289,6 +1289,15 @@ config CMD_REISER reiserls - list files reiserload - load a file +config CMD_SCSI + bool "scsi - Access to SCSI devices" + select SCSI + help + This provides a 'scsi' command which provides access to SCSI (Small + Computer System Interface) devices. The command provides a way to + scan the bus, reset the bus, read and write data and get information + about devices. + endmenu menu "Debug commands" diff --git a/cmd/Makefile b/cmd/Makefile index eff6bd678f..a85fe25dda 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -106,7 +106,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o obj-$(CONFIG_SANDBOX) += host.o obj-$(CONFIG_CMD_SATA) += sata.o obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_SCSI) += scsi.o disk.o +obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o obj-$(CONFIG_CMD_SPI) += spi.o diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig index 2f1863f1ee..10c10f2387 100644 --- a/configs/cl-som-am57x_defconfig +++ b/configs/cl-som-am57x_defconfig @@ -32,6 +32,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_SCSI=y CONFIG_ISO_PARTITION=y CONFIG_CMD_PCA953X=y CONFIG_LED_STATUS=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index c7102810a3..01db848b4e 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -32,6 +32,7 @@ CONFIG_CMD_TIME=y CONFIG_CMD_TPM=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y +CONFIG_CMD_SCSI=y CONFIG_EFI_PARTITION=y CONFIG_OF_BOARD_FIXUP=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index ea8e262317..c8864fa7b0 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_SCSI=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h index ecc87fb6d2..d4a28a597c 100644 --- a/include/configs/cl-som-am57x.h +++ b/include/configs/cl-som-am57x.h @@ -65,7 +65,6 @@ #ifndef CONFIG_SPL_BUILD /* SATA */ -#define CONFIG_CMD_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 09af7829ca..a9beb80c92 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -33,7 +33,6 @@ * Commands configuration */ #define CONFIG_CMD_I2C -#define CONFIG_CMD_SCSI #define CONFIG_CMD_SPI /* SPI NOR flash default params, used by sf commands */ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 162b866ad5..46cc33deac 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -137,7 +137,6 @@ #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI #define CONFIG_SYS_SATA AHCI_BASE_ADDR diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 653837c689..8d7888aec8 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -53,7 +53,6 @@ #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI #define CONFIG_SYS_SATA AHCI_BASE_ADDR diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 100b8511ac..9c3133caa8 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -143,7 +143,6 @@ #define CONFIG_FSL_ESDHC /* SATA */ -#define CONFIG_CMD_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index deae787358..79f2dc2987 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -299,7 +299,6 @@ #ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI -#define CONFIG_CMD_SCSI #ifndef CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT2 #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index a0b39a355f..4949e182c9 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -296,7 +296,6 @@ CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG -CONFIG_CMD_SCSI CONFIG_CMD_SDRAM CONFIG_CMD_SF_TEST CONFIG_CMD_SH_ZIMAGEBOOT
This converts the following to Kconfig: CONFIG_CMD_SCSI Signed-off-by: Simon Glass <sjg@chromium.org> --- arch/arm/Kconfig | 3 +++ cmd/Kconfig | 9 +++++++++ cmd/Makefile | 2 +- configs/cl-som-am57x_defconfig | 1 + configs/controlcenterdc_defconfig | 1 + configs/ls1012aqds_qspi_defconfig | 1 + include/configs/cl-som-am57x.h | 1 - include/configs/controlcenterdc.h | 1 - include/configs/ls1012aqds.h | 1 - include/configs/ls1012ardb.h | 1 - include/configs/ls1021aiot.h | 1 - include/configs/ls1043ardb.h | 1 - scripts/config_whitelist.txt | 1 - 13 files changed, 16 insertions(+), 8 deletions(-)