| Message ID | 20170706211352.1582-1-oleks@arcturusnetworks.com |
|---|---|
| State | Deferred |
| Headers | show |
Hello Thomas, Thanks for applying to master our uCP1020 changes. Can you look closer to this uCLS1012A new version of the patch ? Kind Regards, Oleks On 07/06/2017 05:13 PM, Oleksandr Zhadan wrote: > The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc. > 64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A > Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card > contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is > available with 1 or 2 Gig-Ethernet PHYs. > > Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> > Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> > --- > > Changes v3-> v4 > - post-image.sh cleaned > - post-build.sh removed > - toolchain changed to the internal > - added version in the custom tarball names > - added developers names into DEVELOPER file > > Changes v2 -> v3: > - commit title is changed (from "Arcturus uCLS1012A-SOM support") > - new updates in readme.txt > - ls1012a network firmware moved into kernel > - do not remove any intermediate files > - fix relative patches inside ucls1012a.its > > Changes v1 -> v2: > - updated readme.txt > - fixed post-image.sh (Do not have to remove Image and *.dtb files) > --- > > Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> > --- > DEVELOPERS | 8 +++ > board/arcturus/aarch64-ucls1012a/post-image.sh | 7 ++ > board/arcturus/aarch64-ucls1012a/readme.txt | 74 ++++++++++++++++++++++ > .../rootfs_overlay/etc/init.d/S09modload | 14 ++++ > board/arcturus/aarch64-ucls1012a/ucls1012a.its | 50 +++++++++++++++ > configs/arcturus_ucls1012a_defconfig | 22 +++++++ > 6 files changed, 175 insertions(+) > create mode 100755 board/arcturus/aarch64-ucls1012a/post-image.sh > create mode 100644 board/arcturus/aarch64-ucls1012a/readme.txt > create mode 100755 board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload > create mode 100644 board/arcturus/aarch64-ucls1012a/ucls1012a.its > create mode 100644 configs/arcturus_ucls1012a_defconfig > > diff --git a/DEVELOPERS b/DEVELOPERS > index c409f2822..623a05b79 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -1219,6 +1219,10 @@ F: package/tinyxml/ > N: Maxime Ripard <maxime.ripard@free-electrons.com> > F: package/kmsxx/ > > +N: Michael Durrant <mdurrant@arcturusnetworks.com> > +F: board/arcturus/ > +F: configs/arcturus_* > + > N: Michael Rommel <rommel@layer-7.net> > F: package/aiccu/ > F: package/knock/ > @@ -1264,6 +1268,10 @@ F: package/trousers/ > N: Olaf Rempel <razzor@kopf-tisch.de> > F: package/ctorrent/ > > +N: Oleksandr Zhadan <oleks@arcturusnetworks.com> > +F: board/arcturus/ > +F: configs/arcturus_* > + > N: Oli Vogt <oli.vogt.pub01@gmail.com> > F: package/python-django/ > F: package/python-flup/ > diff --git a/board/arcturus/aarch64-ucls1012a/post-image.sh b/board/arcturus/aarch64-ucls1012a/post-image.sh > new file mode 100755 > index 000000000..5280fc245 > --- /dev/null > +++ b/board/arcturus/aarch64-ucls1012a/post-image.sh > @@ -0,0 +1,7 @@ > +#!/bin/sh > + > +cp -f board/arcturus/aarch64-ucls1012a/ucls1012a.its ${BINARIES_DIR}/ > +MKIMAGE=${HOST_DIR}/usr/bin/mkimage > +MKIMAGE_IN=${BINARIES_DIR}/ucls1012a.its > +MKIMAGE_OUT=${BINARIES_DIR}/part0-000000.itb > +${MKIMAGE} -f ${MKIMAGE_IN} ${MKIMAGE_OUT} > diff --git a/board/arcturus/aarch64-ucls1012a/readme.txt b/board/arcturus/aarch64-ucls1012a/readme.txt > new file mode 100644 > index 000000000..61fe3c55a > --- /dev/null > +++ b/board/arcturus/aarch64-ucls1012a/readme.txt > @@ -0,0 +1,74 @@ > +Arcturus uCLS1012A SoM > +====================== > + > +This tutorial describes how to use the predefined Buildroot > +configuration for the Arcturus uCLS101A SoM platform. > + > +Additional information about the uCLS1012A System on Module can be found at > +https://www.arcturusnetworks.com/products/ucls1012a > +and product support for registered users at > +https://www.arcturusnetworks.com/support > + > +Building > +-------- > + > +Return to the top directory <buildrootdir> and execute the following commands. > + > + make arcturus_ucls1012a_defconfig > + make > + > +Result of the build > +------------------- > + > +After building, you should obtain this tree: > + > + output/images/ > + +-- arc-ucls1012a.dtb > + +-- Image > + +-- part0-000000.itb > + +-- rootfs.cpio > + +-- rootfs.cpio.gz > + +-- rootfs.tar > + +-- u-boot.bin > + +-- ucls1012a.its > + > +Flashing > +-------- > + > +You'll need to program the image created by buildroot into the SPI NOR flash. > + > +1. Reboot your module and via the serial console press <escape> to enter the B$ > +u-boot shell. > + From the shell you will need to update four environment variables replacing the > + IPv4 IP Address with ones that will work with your network and tftp server. > + > + B$ setenv ipaddr 192.168.1.81 > + B$ setenv serverip 192.168.1.80 > + B$ setenv gatewayip 192.168.1.1 > + B$ setenv netmask 255.255.255.0 > + B$ saveenv > + > +2. Enable tftp server to serve the <buildrootdir>/output/images/ folder. > + > +3. Program the new U-Boot binary (optional) > + If you don't feel confident upgrading your bootloader then don't do it, > + it's unnecessary most of the time. > + > + B$ tftp u-boot.bin > + B$ run program_uboot > + > +4. Program the ITB image (includes Kernel, DTB and Ramdisk) > + > + B$ tftp part0-000000.itb > + B$ run program0 > + > +5. Booting your new system > + > + Reboot your system by reset command > + B$ reset > + > + or > + > + B$ run bootcmd > + > +Good Luck ! > diff --git a/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload b/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload > new file mode 100755 > index 000000000..c87ffda14 > --- /dev/null > +++ b/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload > @@ -0,0 +1,14 @@ > +#!/bin/sh > +# > +case "$1" in > + start) > + modprobe pfe > + ;; > + stop) > + ;; > + restart|reload) > + ;; > + *) > + echo "Usage: $0 {start|stop|restart}" > + exit 1 > +esac > diff --git a/board/arcturus/aarch64-ucls1012a/ucls1012a.its b/board/arcturus/aarch64-ucls1012a/ucls1012a.its > new file mode 100644 > index 000000000..f19080d31 > --- /dev/null > +++ b/board/arcturus/aarch64-ucls1012a/ucls1012a.its > @@ -0,0 +1,50 @@ > +/* > + * Copyright (C) 2017, Arcturus Networks Inc. > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +/dts-v1/; > + > +/ { > + description = "Image file for the Arcturus uCLS1012A Linux Kernel"; > + #address-cells = <1>; > + images { > + kernel { > + description = "Linux kernel"; > + data = /incbin/("Image"); > + type = "kernel"; > + arch = "arm64"; > + os = "linux"; > + compression = "none"; > + load = <0x80080000>; > + entry = <0x80080000>; > + }; > + fdt { > + description = "Flattened Device Tree Blob"; > + data = /incbin/("arc-ucls1012a.dtb"); > + type = "flat_dt"; > + arch = "arm64"; > + compression = "none"; > + load = <0x90000000>; > + }; > + ramdisk { > + description = "Ramdisk"; > + data = /incbin/("rootfs.cpio.gz"); > + type = "ramdisk"; > + arch = "arm64"; > + os = "linux"; > + compression = "gzip"; > + }; > + }; > + configurations { > + default = "config"; > + config { > + kernel = "kernel"; > + fdt = "fdt"; > + ramdisk = "ramdisk"; > + }; > + }; > +}; > diff --git a/configs/arcturus_ucls1012a_defconfig b/configs/arcturus_ucls1012a_defconfig > new file mode 100644 > index 000000000..325b0ceab > --- /dev/null > +++ b/configs/arcturus_ucls1012a_defconfig > @@ -0,0 +1,22 @@ > +BR2_aarch64=y > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y > +BR2_TARGET_GENERIC_HOSTNAME="ucls1012a" > +BR2_TARGET_GENERIC_ISSUE="Welcome to uCLS1012A-SOM" > +BR2_SYSTEM_DHCP="eth0" > +BR2_ROOTFS_OVERLAY="board/arcturus/aarch64-ucls1012a/rootfs_overlay" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arcturus/aarch64-ucls1012a/post-image.sh" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://www.arcturusnetworks.com/OSS/kernel-ucls1012a-170706-13.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="ucls1012a" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="arcturus/arc-ucls1012a" > +BR2_TARGET_ROOTFS_CPIO=y > +BR2_TARGET_ROOTFS_CPIO_GZIP=y > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://www.arcturusnetworks.com/OSS/u-boot-ucls1012a-170706-13.tar.gz" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="UCLS1012A_QSPI" > +BR2_PACKAGE_HOST_UBOOT_TOOLS=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
diff --git a/DEVELOPERS b/DEVELOPERS index c409f2822..623a05b79 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1219,6 +1219,10 @@ F: package/tinyxml/ N: Maxime Ripard <maxime.ripard@free-electrons.com> F: package/kmsxx/ +N: Michael Durrant <mdurrant@arcturusnetworks.com> +F: board/arcturus/ +F: configs/arcturus_* + N: Michael Rommel <rommel@layer-7.net> F: package/aiccu/ F: package/knock/ @@ -1264,6 +1268,10 @@ F: package/trousers/ N: Olaf Rempel <razzor@kopf-tisch.de> F: package/ctorrent/ +N: Oleksandr Zhadan <oleks@arcturusnetworks.com> +F: board/arcturus/ +F: configs/arcturus_* + N: Oli Vogt <oli.vogt.pub01@gmail.com> F: package/python-django/ F: package/python-flup/ diff --git a/board/arcturus/aarch64-ucls1012a/post-image.sh b/board/arcturus/aarch64-ucls1012a/post-image.sh new file mode 100755 index 000000000..5280fc245 --- /dev/null +++ b/board/arcturus/aarch64-ucls1012a/post-image.sh @@ -0,0 +1,7 @@ +#!/bin/sh + +cp -f board/arcturus/aarch64-ucls1012a/ucls1012a.its ${BINARIES_DIR}/ +MKIMAGE=${HOST_DIR}/usr/bin/mkimage +MKIMAGE_IN=${BINARIES_DIR}/ucls1012a.its +MKIMAGE_OUT=${BINARIES_DIR}/part0-000000.itb +${MKIMAGE} -f ${MKIMAGE_IN} ${MKIMAGE_OUT} diff --git a/board/arcturus/aarch64-ucls1012a/readme.txt b/board/arcturus/aarch64-ucls1012a/readme.txt new file mode 100644 index 000000000..61fe3c55a --- /dev/null +++ b/board/arcturus/aarch64-ucls1012a/readme.txt @@ -0,0 +1,74 @@ +Arcturus uCLS1012A SoM +====================== + +This tutorial describes how to use the predefined Buildroot +configuration for the Arcturus uCLS101A SoM platform. + +Additional information about the uCLS1012A System on Module can be found at +https://www.arcturusnetworks.com/products/ucls1012a +and product support for registered users at +https://www.arcturusnetworks.com/support + +Building +-------- + +Return to the top directory <buildrootdir> and execute the following commands. + + make arcturus_ucls1012a_defconfig + make + +Result of the build +------------------- + +After building, you should obtain this tree: + + output/images/ + +-- arc-ucls1012a.dtb + +-- Image + +-- part0-000000.itb + +-- rootfs.cpio + +-- rootfs.cpio.gz + +-- rootfs.tar + +-- u-boot.bin + +-- ucls1012a.its + +Flashing +-------- + +You'll need to program the image created by buildroot into the SPI NOR flash. + +1. Reboot your module and via the serial console press <escape> to enter the B$ +u-boot shell. + From the shell you will need to update four environment variables replacing the + IPv4 IP Address with ones that will work with your network and tftp server. + + B$ setenv ipaddr 192.168.1.81 + B$ setenv serverip 192.168.1.80 + B$ setenv gatewayip 192.168.1.1 + B$ setenv netmask 255.255.255.0 + B$ saveenv + +2. Enable tftp server to serve the <buildrootdir>/output/images/ folder. + +3. Program the new U-Boot binary (optional) + If you don't feel confident upgrading your bootloader then don't do it, + it's unnecessary most of the time. + + B$ tftp u-boot.bin + B$ run program_uboot + +4. Program the ITB image (includes Kernel, DTB and Ramdisk) + + B$ tftp part0-000000.itb + B$ run program0 + +5. Booting your new system + + Reboot your system by reset command + B$ reset + + or + + B$ run bootcmd + +Good Luck ! diff --git a/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload b/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload new file mode 100755 index 000000000..c87ffda14 --- /dev/null +++ b/board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload @@ -0,0 +1,14 @@ +#!/bin/sh +# +case "$1" in + start) + modprobe pfe + ;; + stop) + ;; + restart|reload) + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac diff --git a/board/arcturus/aarch64-ucls1012a/ucls1012a.its b/board/arcturus/aarch64-ucls1012a/ucls1012a.its new file mode 100644 index 000000000..f19080d31 --- /dev/null +++ b/board/arcturus/aarch64-ucls1012a/ucls1012a.its @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2017, Arcturus Networks Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + description = "Image file for the Arcturus uCLS1012A Linux Kernel"; + #address-cells = <1>; + images { + kernel { + description = "Linux kernel"; + data = /incbin/("Image"); + type = "kernel"; + arch = "arm64"; + os = "linux"; + compression = "none"; + load = <0x80080000>; + entry = <0x80080000>; + }; + fdt { + description = "Flattened Device Tree Blob"; + data = /incbin/("arc-ucls1012a.dtb"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x90000000>; + }; + ramdisk { + description = "Ramdisk"; + data = /incbin/("rootfs.cpio.gz"); + type = "ramdisk"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + }; + }; + configurations { + default = "config"; + config { + kernel = "kernel"; + fdt = "fdt"; + ramdisk = "ramdisk"; + }; + }; +}; diff --git a/configs/arcturus_ucls1012a_defconfig b/configs/arcturus_ucls1012a_defconfig new file mode 100644 index 000000000..325b0ceab --- /dev/null +++ b/configs/arcturus_ucls1012a_defconfig @@ -0,0 +1,22 @@ +BR2_aarch64=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +BR2_TARGET_GENERIC_HOSTNAME="ucls1012a" +BR2_TARGET_GENERIC_ISSUE="Welcome to uCLS1012A-SOM" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_OVERLAY="board/arcturus/aarch64-ucls1012a/rootfs_overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arcturus/aarch64-ucls1012a/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://www.arcturusnetworks.com/OSS/kernel-ucls1012a-170706-13.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="ucls1012a" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="arcturus/arc-ucls1012a" +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://www.arcturusnetworks.com/OSS/u-boot-ucls1012a-170706-13.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="UCLS1012A_QSPI" +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y