| Message ID | 1499486629-9659-2-git-send-email-david.wu@rock-chips.com |
|---|---|
| State | Superseded |
| Headers | show |
Hi, On Fri, Jul 7, 2017 at 9:03 PM, David Wu <david.wu@rock-chips.com> wrote: > @@ -6,7 +6,13 @@ Required properties: > "rockchip,rk3288-pwm": found on RK3288 SoC > "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC > - reg: physical base address and length of the controller's registers > - - clocks: phandle and clock specifier of the PWM reference clock > + - clocks: See ../clock/clock-bindings.txt > + - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399): > + - There is one clock that's used both to derive the functional clock > + for the device and as the bus clock. > + - For newer hardware (rk3328 and future socs): specified by name > + - "pwm": This is used to derive the functional clock. > + - "pclk": This is the APB bus clock. I'm pretty sure that that the above description doesn't quite match the code. * The above description says that for old hardware there is one clock and 'clock-names' was not necessary (though as I understand it it's OK if it's there). * The old code matched the old description. AKA: if there was no "clock-names" then everything was OK. * The new code will not work if there was no "clock-names". Many of the old devices had a clock-names present (and it was "pwm"), but not all. Specifically it looks like "arch/arm/boot/dts/rk3xxx.dtsi" doesn't specify a clock-names. > @@ -343,13 +344,38 @@ static int rockchip_pwm_probe(struct platform_device *pdev) > if (IS_ERR(pc->base)) > return PTR_ERR(pc->base); > > - pc->clk = devm_clk_get(&pdev->dev, NULL); > - if (IS_ERR(pc->clk)) > - return PTR_ERR(pc->clk); > + pc->clk = devm_clk_get(&pdev->dev, "pwm"); > + count = of_property_count_strings(pdev->dev.of_node, "clock-names"); > + if (count == 2) > + pc->pclk = devm_clk_get(&pdev->dev, "pclk"); > + else > + pc->pclk = pc->clk; > + > + if (IS_ERR(pc->clk)) { > + ret = PTR_ERR(pc->clk); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret); > + return ret; > + } > + > + if (IS_ERR(pc->pclk)) { > + ret = PTR_ERR(pc->pclk); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "Can't get APB clk: %d\n", ret); > + return ret; > + } In the above code you need to check the count _before_ trying to get the clock by name. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Doug, 在 2017/7/12 1:03, Doug Anderson 写道: > Hi, > > On Fri, Jul 7, 2017 at 9:03 PM, David Wu <david.wu@rock-chips.com> wrote: > >> @@ -6,7 +6,13 @@ Required properties: >> "rockchip,rk3288-pwm": found on RK3288 SoC >> "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC >> - reg: physical base address and length of the controller's registers >> - - clocks: phandle and clock specifier of the PWM reference clock >> + - clocks: See ../clock/clock-bindings.txt >> + - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399): >> + - There is one clock that's used both to derive the functional clock >> + for the device and as the bus clock. >> + - For newer hardware (rk3328 and future socs): specified by name >> + - "pwm": This is used to derive the functional clock. >> + - "pclk": This is the APB bus clock. > > I'm pretty sure that that the above description doesn't quite match the code. > > * The above description says that for old hardware there is one clock > and 'clock-names' was not necessary (though as I understand it it's OK > if it's there). > > * The old code matched the old description. AKA: if there was no > "clock-names" then everything was OK. > > * The new code will not work if there was no "clock-names". > > Many of the old devices had a clock-names present (and it was "pwm"), > but not all. Specifically it looks like > "arch/arm/boot/dts/rk3xxx.dtsi" doesn't specify a clock-names. > So we can keep code: the pc->clk = devm_clk_get(&pdev->dev, NULL); If the name is NULL, we can get the first clk defined at DTB. >> @@ -343,13 +344,38 @@ static int rockchip_pwm_probe(struct platform_device *pdev) >> if (IS_ERR(pc->base)) >> return PTR_ERR(pc->base); >> >> - pc->clk = devm_clk_get(&pdev->dev, NULL); >> - if (IS_ERR(pc->clk)) >> - return PTR_ERR(pc->clk); >> + pc->clk = devm_clk_get(&pdev->dev, "pwm"); >> + count = of_property_count_strings(pdev->dev.of_node, "clock-names"); >> + if (count == 2) >> + pc->pclk = devm_clk_get(&pdev->dev, "pclk"); >> + else >> + pc->pclk = pc->clk; >> + >> + if (IS_ERR(pc->clk)) { >> + ret = PTR_ERR(pc->clk); >> + if (ret != -EPROBE_DEFER) >> + dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret); >> + return ret; >> + } >> + >> + if (IS_ERR(pc->pclk)) { >> + ret = PTR_ERR(pc->pclk); >> + if (ret != -EPROBE_DEFER) >> + dev_err(&pdev->dev, "Can't get APB clk: %d\n", ret); >> + return ret; >> + } > > In the above code you need to check the count _before_ trying to get > the clock by name. Okay, I will fix it. > > > -Doug > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi David, Am Mittwoch, 12. Juli 2017, 16:38:09 CEST schrieb David.Wu: > Hi Doug, > > 在 2017/7/12 1:03, Doug Anderson 写道: > > Hi, > > > > On Fri, Jul 7, 2017 at 9:03 PM, David Wu <david.wu@rock-chips.com> wrote: > >> @@ -6,7 +6,13 @@ Required properties: > >> "rockchip,rk3288-pwm": found on RK3288 SoC > >> "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC > >> > >> - reg: physical base address and length of the controller's registers > >> > >> - - clocks: phandle and clock specifier of the PWM reference clock > >> + - clocks: See ../clock/clock-bindings.txt > >> + - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, > >> rk3399): > >> + - There is one clock that's used both to derive the functional > >> clock > >> + for the device and as the bus clock. > >> + - For newer hardware (rk3328 and future socs): specified by name > >> + - "pwm": This is used to derive the functional clock. > >> + - "pclk": This is the APB bus clock. > > > > I'm pretty sure that that the above description doesn't quite match the > > code. > > > > * The above description says that for old hardware there is one clock > > and 'clock-names' was not necessary (though as I understand it it's OK > > if it's there). > > > > * The old code matched the old description. AKA: if there was no > > "clock-names" then everything was OK. > > > > * The new code will not work if there was no "clock-names". > > > > Many of the old devices had a clock-names present (and it was "pwm"), > > but not all. Specifically it looks like > > "arch/arm/boot/dts/rk3xxx.dtsi" doesn't specify a clock-names. > > So we can keep code: the pc->clk = devm_clk_get(&pdev->dev, NULL); > If the name is NULL, we can get the first clk defined at DTB. I don't think it will work that way. clk_get with NULL argument will likely grab the first clock of the list independent of clock-names being present. It might be better to do something like [pseudo-code]: pwm->pclk = clk_get( ..., "pclk"); if (IS_ERR(pwm->pclk)) pwm->pclk = NULL; pwm->pwm_clk = clk_get(..., "pwm"); if (IS_ERR(pwm->pwm_clk)) pwm->pwm_clk = clk_get(..., NULL); if (IS_ERR(pwm->pwm_clk)) return PTR_ERR(pwm->pwm_clk); That way, you make your way backwards through the pwm-binding-history. Ending at the single-clock without clock-names property as the last fallback. Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-pwm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt index b8be3d0..2350ef9 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt @@ -6,7 +6,13 @@ Required properties: "rockchip,rk3288-pwm": found on RK3288 SoC "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC - reg: physical base address and length of the controller's registers - - clocks: phandle and clock specifier of the PWM reference clock + - clocks: See ../clock/clock-bindings.txt + - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399): + - There is one clock that's used both to derive the functional clock + for the device and as the bus clock. + - For newer hardware (rk3328 and future socs): specified by name + - "pwm": This is used to derive the functional clock. + - "pclk": This is the APB bus clock. - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory for a description of the cell format. diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c index 744d561..617824c 100644 --- a/drivers/pwm/pwm-rockchip.c +++ b/drivers/pwm/pwm-rockchip.c @@ -33,6 +33,7 @@ struct rockchip_pwm_chip { struct pwm_chip chip; struct clk *clk; + struct clk *pclk; const struct rockchip_pwm_data *data; void __iomem *base; }; @@ -145,7 +146,7 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip, u64 tmp; int ret; - ret = clk_enable(pc->clk); + ret = clk_enable(pc->pclk); if (ret) return; @@ -161,7 +162,7 @@ static void rockchip_pwm_get_state(struct pwm_chip *chip, pc->data->get_state(chip, pwm, state); - clk_disable(pc->clk); + clk_disable(pc->pclk); } static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, @@ -224,7 +225,7 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, pwm_get_state(pwm, &curstate); enabled = curstate.enabled; - ret = clk_enable(pc->clk); + ret = clk_enable(pc->pclk); if (ret) return ret; @@ -257,7 +258,7 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, rockchip_pwm_get_state(chip, pwm, state); out: - clk_disable(pc->clk); + clk_disable(pc->pclk); return ret; } @@ -328,7 +329,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev) const struct of_device_id *id; struct rockchip_pwm_chip *pc; struct resource *r; - int ret; + int ret, count; id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev); if (!id) @@ -343,13 +344,38 @@ static int rockchip_pwm_probe(struct platform_device *pdev) if (IS_ERR(pc->base)) return PTR_ERR(pc->base); - pc->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(pc->clk)) - return PTR_ERR(pc->clk); + pc->clk = devm_clk_get(&pdev->dev, "pwm"); + count = of_property_count_strings(pdev->dev.of_node, "clock-names"); + if (count == 2) + pc->pclk = devm_clk_get(&pdev->dev, "pclk"); + else + pc->pclk = pc->clk; + + if (IS_ERR(pc->clk)) { + ret = PTR_ERR(pc->clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret); + return ret; + } + + if (IS_ERR(pc->pclk)) { + ret = PTR_ERR(pc->pclk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Can't get APB clk: %d\n", ret); + return ret; + } ret = clk_prepare_enable(pc->clk); - if (ret) + if (ret) { + dev_err(&pdev->dev, "Can't prepare enable bus clk: %d\n", ret); return ret; + } + + ret = clk_prepare(pc->pclk); + if (ret) { + dev_err(&pdev->dev, "Can't prepare APB clk: %d\n", ret); + goto err_clk; + } platform_set_drvdata(pdev, pc); @@ -368,12 +394,20 @@ static int rockchip_pwm_probe(struct platform_device *pdev) if (ret < 0) { clk_unprepare(pc->clk); dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); + goto err_pclk; } /* Keep the PWM clk enabled if the PWM appears to be up and running. */ if (!pwm_is_enabled(pc->chip.pwms)) clk_disable(pc->clk); + return 0; + +err_pclk: + clk_unprepare(pc->pclk); +err_clk: + clk_disable_unprepare(pc->clk); + return ret; } @@ -395,6 +429,7 @@ static int rockchip_pwm_remove(struct platform_device *pdev) if (pwm_is_enabled(pc->chip.pwms)) clk_disable(pc->clk); + clk_unprepare(pc->pclk); clk_unprepare(pc->clk); return pwmchip_remove(&pc->chip);