@@ -241,9 +241,6 @@ extern void pcibios_remove_pci_devices(s
/** Discover new pci devices under this bus, and add them */
extern void pcibios_add_pci_devices(struct pci_bus *bus);
-extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
-
-extern int pcibios_remove_root_bus(struct pci_controller *phb);
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
===================================================================
@@ -204,15 +204,12 @@ static inline struct resource *pcibios_s
return root;
}
-extern void pcibios_setup_new_device(struct pci_dev *dev);
-
-extern void pcibios_claim_one_bus(struct pci_bus *b);
-
-extern void pcibios_allocate_bus_resources(struct pci_bus *bus);
+extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
extern void pcibios_resource_survey(void);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern int remove_phb_dynamic(struct pci_controller *phb);
extern struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn);
===================================================================
@@ -202,7 +202,7 @@ char __devinit *pcibios_setup(char *str)
return str;
}
-void __devinit pcibios_setup_new_device(struct pci_dev *dev)
+static void __devinit pcibios_setup_new_device(struct pci_dev *dev)
{
struct dev_archdata *sd = &dev->dev.archdata;
@@ -220,7 +220,6 @@ void __devinit pcibios_setup_new_device(
if (ppc_md.pci_dma_dev_setup)
ppc_md.pci_dma_dev_setup(dev);
}
-EXPORT_SYMBOL(pcibios_setup_new_device);
/*
* Reads the interrupt pin to determine if interrupt is use by card.
@@ -1399,9 +1398,10 @@ void __init pcibios_resource_survey(void
#ifdef CONFIG_HOTPLUG
-/* This is used by the pSeries hotplug driver to allocate resource
+/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
- * rest of the code later, for now, keep it as-is
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
*/
static void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
{
@@ -1416,6 +1416,14 @@ static void __devinit pcibios_claim_one_
if (r->parent || !r->start || !r->flags)
continue;
+
+ pr_debug("PCI: Claiming %s: "
+ "Resource %d: %016llx..%016llx [%x]\n",
+ pci_name(dev), i,
+ (unsigned long long)r->start,
+ (unsigned long long)r->end,
+ (unsigned int)r->flags);
+
pci_claim_resource(dev, i);
}
}
@@ -1423,6 +1431,31 @@ static void __devinit pcibios_claim_one_
list_for_each_entry(child_bus, &bus->children, node)
pcibios_claim_one_bus(child_bus);
}
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+ pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
+
+ /* Allocate bus and devices resources */
+ pcibios_allocate_bus_resources(bus);
+ pcibios_claim_one_bus(bus);
+
+ /* Add new devices to global lists. Register in proc, sysfs. */
+ pci_bus_add_devices(bus);
+
+ /* Fixup EEH */
+ eeh_add_device_tree_late(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
#endif /* CONFIG_HOTPLUG */
int pcibios_enable_device(struct pci_dev *dev, int mask)
===================================================================
@@ -301,51 +301,3 @@ void __init find_and_init_phbs(void)
#endif /* CONFIG_PPC32 */
}
}
-
-/* RPA-specific bits for removing PHBs */
-int pcibios_remove_root_bus(struct pci_controller *phb)
-{
- struct pci_bus *b = phb->bus;
- struct resource *res;
- int rc, i;
-
- res = b->resource[0];
- if (!res->flags) {
- printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
- b->name);
- return 1;
- }
-
- rc = pcibios_unmap_io_space(b);
- if (rc) {
- printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
- __func__, b->name);
- return 1;
- }
-
- if (release_resource(res)) {
- printk(KERN_ERR "%s: failed to release IO on bus %s\n",
- __func__, b->name);
- return 1;
- }
-
- for (i = 1; i < 3; ++i) {
- res = b->resource[i];
- if (!res->flags && i == 0) {
- printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
- __func__, b->name);
- return 1;
- }
- if (res->flags && release_resource(res)) {
- printk(KERN_ERR
- "%s: failed to release IO %d on bus %s\n",
- __func__, i, b->name);
- return 1;
- }
- }
-
- pcibios_free_controller(phb);
-
- return 0;
-}
-EXPORT_SYMBOL(pcibios_remove_root_bus);
===================================================================
@@ -25,6 +25,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#undef DEBUG
+
#include <linux/pci.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
@@ -69,74 +71,25 @@ EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
* Remove all of the PCI devices under this bus both from the
* linux pci device tree, and from the powerpc EEH address cache.
*/
-void
-pcibios_remove_pci_devices(struct pci_bus *bus)
+void pcibios_remove_pci_devices(struct pci_bus *bus)
{
- struct pci_dev *dev, *tmp;
+ struct pci_dev *dev, *tmp;
+ struct pci_bus *child_bus;
+
+ /* First go down child busses */
+ list_for_each_entry(child_bus, &bus->children, node)
+ pcibios_remove_pci_devices(child_bus);
+ pr_debug("PCI: Removing devices on bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ pr_debug(" * Removing %s...\n", pci_name(dev));
eeh_remove_bus_device(dev);
- pci_remove_bus_device(dev);
- }
+ pci_remove_bus_device(dev);
+ }
}
EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
-/* Must be called before pci_bus_add_devices */
-void
-pcibios_fixup_new_pci_devices(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- /* Skip already-added devices */
- if (!dev->is_added) {
- int i;
-
- /* Fill device archdata and setup iommu table */
- pcibios_setup_new_device(dev);
-
- pci_read_irq_line(dev);
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource *r = &dev->resource[i];
-
- if (r->parent || !r->start || !r->flags)
- continue;
- pci_claim_resource(dev, i);
- }
- }
- }
-}
-EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
-
-static int
-pcibios_pci_config_bridge(struct pci_dev *dev)
-{
- u8 sec_busno;
- struct pci_bus *child_bus;
-
- /* Get busno of downstream bus */
- pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
-
- /* Add to children of PCI bridge dev->bus */
- child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
- if (!child_bus) {
- printk (KERN_ERR "%s: could not add second bus\n", __func__);
- return -EIO;
- }
- sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
-
- pci_scan_child_bus(child_bus);
-
- /* Fixup new pci devices */
- pcibios_fixup_new_pci_devices(child_bus);
-
- /* Make the discovered devices available */
- pci_bus_add_devices(child_bus);
-
- eeh_add_device_tree_late(child_bus);
- return 0;
-}
-
/**
* pcibios_add_pci_devices - adds new pci devices to bus
*
@@ -147,10 +100,9 @@ pcibios_pci_config_bridge(struct pci_dev
* is how this routine differs from other, similar pcibios
* routines.)
*/
-void
-pcibios_add_pci_devices(struct pci_bus * bus)
+void pcibios_add_pci_devices(struct pci_bus * bus)
{
- int slotno, num, mode;
+ int slotno, num, mode, pass, max;
struct pci_dev *dev;
struct device_node *dn = pci_bus_to_OF_node(bus);
@@ -162,26 +114,23 @@ pcibios_add_pci_devices(struct pci_bus *
if (mode == PCI_PROBE_DEVTREE) {
/* use ofdt-based probe */
- of_scan_bus(dn, bus);
- if (!list_empty(&bus->devices)) {
- pcibios_fixup_new_pci_devices(bus);
- pci_bus_add_devices(bus);
- eeh_add_device_tree_late(bus);
- }
+ of_rescan_bus(dn, bus);
} else if (mode == PCI_PROBE_NORMAL) {
/* use legacy probe */
slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- pcibios_fixup_new_pci_devices(bus);
- pci_bus_add_devices(bus);
- eeh_add_device_tree_late(bus);
+ if (!num)
+ return;
+ pcibios_setup_bus_devices(bus);
+ max = bus->secondary;
+ for (pass=0; pass < 2; pass++)
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+ dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+ max = pci_scan_bridge(bus, dev, max, pass);
}
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pcibios_pci_config_bridge(dev);
}
+ pcibios_finish_adding_to_bus(bus);
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
@@ -189,7 +138,8 @@ struct pci_controller * __devinit init_p
{
struct pci_controller *phb;
int primary;
- struct pci_bus *b;
+
+ pr_debug("PCI: Initializing new hotplug PHB %s\n", dn->full_name);
primary = list_empty(&hose_list);
phb = pcibios_alloc_controller(dn);
@@ -204,11 +154,59 @@ struct pci_controller * __devinit init_p
eeh_add_device_tree_early(dn);
scan_phb(phb);
- pcibios_allocate_bus_resources(phb->bus);
- pcibios_fixup_new_pci_devices(phb->bus);
- pci_bus_add_devices(phb->bus);
- eeh_add_device_tree_late(phb->bus);
+ pcibios_finish_adding_to_bus(phb->bus);
return phb;
}
EXPORT_SYMBOL_GPL(init_phb_dynamic);
+
+/* RPA-specific bits for removing PHBs */
+int remove_phb_dynamic(struct pci_controller *phb)
+{
+ struct pci_bus *b = phb->bus;
+ struct resource *res;
+ int rc, i;
+
+ pr_debug("PCI: Removing PHB %04x:%02x... \n",
+ pci_domain_nr(b), b->number);
+
+ /* We cannot to remove a root bus that has children */
+ if (!(list_empty(&b->children) && list_empty(&b->devices)))
+ return -EBUSY;
+
+ /* We -know- there aren't any child devices anymore at this stage
+ * and thus, we can safely unmap the IO space as it's not in use
+ */
+ res = &phb->io_resource;
+ if (res->flags & IORESOURCE_IO) {
+ rc = pcibios_unmap_io_space(b);
+ if (rc) {
+ printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
+ __func__, b->name);
+ return 1;
+ }
+ }
+
+ /* Unregister the bridge device from sysfs and remove the PCI bus */
+ device_unregister(b->bridge);
+ phb->bus = NULL;
+ pci_remove_bus(b);
+
+ /* Now release the IO resource */
+ if (res->flags & IORESOURCE_IO)
+ release_resource(res);
+
+ /* Release memory resources */
+ for (i = 0; i < 3; ++i) {
+ res = &phb->mem_resources[i];
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ release_resource(res);
+ }
+
+ /* Free pci_controller data structure */
+ pcibios_free_controller(phb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(remove_phb_dynamic);
===================================================================
@@ -14,6 +14,9 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+
+#undef DEBUG
+
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/string.h>
@@ -151,20 +154,20 @@ static void dlpar_pci_add_bus(struct dev
return;
}
+ /* Scan below the new bridge */
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
of_scan_pci_bridge(dn, dev);
- pcibios_fixup_new_pci_devices(dev->subordinate);
-
- /* Claim new bus resources */
- pcibios_claim_one_bus(dev->bus);
-
/* Map IO space for child bus, which may or may not succeed */
pcibios_map_io_space(dev->subordinate);
- /* Add new devices to global lists. Register in proc, sysfs. */
- pci_bus_add_devices(phb->bus);
+ /* Finish adding it : resource allocation, adding devices, etc...
+ * Note that we need to perform the finish pass on the -parent-
+ * bus of the EADS bridge so the bridge device itself gets
+ * properly added
+ */
+ pcibios_finish_adding_to_bus(phb->bus);
}
static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn)
@@ -203,27 +206,6 @@ static int dlpar_add_pci_slot(char *drc_
return 0;
}
-static int dlpar_remove_root_bus(struct pci_controller *phb)
-{
- struct pci_bus *phb_bus;
- int rc;
-
- phb_bus = phb->bus;
- if (!(list_empty(&phb_bus->children) &&
- list_empty(&phb_bus->devices))) {
- return -EBUSY;
- }
-
- rc = pcibios_remove_root_bus(phb);
- if (rc)
- return -EIO;
-
- device_unregister(phb_bus->bridge);
- pci_remove_bus(phb_bus);
-
- return 0;
-}
-
static int dlpar_remove_phb(char *drc_name, struct device_node *dn)
{
struct slot *slot;
@@ -235,18 +217,15 @@ static int dlpar_remove_phb(char *drc_na
/* If pci slot is hotplugable, use hotplug to remove it */
slot = find_php_slot(dn);
- if (slot) {
- if (rpaphp_deregister_slot(slot)) {
- printk(KERN_ERR
- "%s: unable to remove hotplug slot %s\n",
- __func__, drc_name);
- return -EIO;
- }
+ if (slot && rpaphp_deregister_slot(slot)) {
+ printk(KERN_ERR "%s: unable to remove hotplug slot %s\n",
+ __func__, drc_name);
+ return -EIO;
}
pdn = dn->data;
BUG_ON(!pdn || !pdn->phb);
- rc = dlpar_remove_root_bus(pdn->phb);
+ rc = remove_phb_dynamic(pdn->phb);
if (rc < 0)
return rc;
@@ -378,26 +357,38 @@ int dlpar_remove_pci_slot(char *drc_name
if (!bus)
return -EINVAL;
- /* If pci slot is hotplugable, use hotplug to remove it */
+ pr_debug("PCI: Removing PCI slot below EADS bridge %s\n",
+ bus->self ? pci_name(bus->self) : "<!PHB!>");
+
slot = find_php_slot(dn);
if (slot) {
+ pr_debug("PCI: Removing hotplug slot for %04x:%02x...\n",
+ pci_domain_nr(bus), bus->number);
+
if (rpaphp_deregister_slot(slot)) {
printk(KERN_ERR
"%s: unable to remove hotplug slot %s\n",
__func__, drc_name);
return -EIO;
}
- } else
- pcibios_remove_pci_devices(bus);
+ }
+
+ /* Remove all devices below slot */
+ pcibios_remove_pci_devices(bus);
+ /* Unmap PCI IO space */
if (pcibios_unmap_io_space(bus)) {
printk(KERN_ERR "%s: failed to unmap bus range\n",
__func__);
return -ERANGE;
}
+ /* Remove the EADS bridge device itself */
BUG_ON(!bus->self);
+ pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self));
+ eeh_remove_bus_device(bus->self);
pci_remove_bus_device(bus->self);
+
return 0;
}
The pseries PCI Hotplug code has a number of issues, ranging from incorrect resource setup to crashes, depending on what is added, when, whether it contains a bridge, etc etc.... This patch fixes a whole bunch of these, while actually simplifying the code a bit, using more generic code in the process and factoring out common code between adding of a PHB, a slot or a device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- arch/powerpc/include/asm/pci-bridge.h | 3 arch/powerpc/include/asm/pci.h | 7 - arch/powerpc/kernel/pci-common.c | 41 ++++++- arch/powerpc/kernel/rtas_pci.c | 48 -------- arch/powerpc/platforms/pseries/pci_dlpar.c | 164 ++++++++++++++--------------- drivers/pci/hotplug/rpadlpar_core.c | 69 +++++------- 6 files changed, 150 insertions(+), 182 deletions(-)