diff mbox

[v2] Force object directory use

Message ID AANLkTimVMS2atBESr8gJky+ay450tH8nkA8OMRH6mBss@mail.gmail.com
State New
Headers show

Commit Message

Blue Swirl Nov. 17, 2010, 7:15 p.m. UTC 
If the user attempts to run 'configure' in the source tree,
create an object directory and configure that instead.

Rename topmost Makefile to Makefile.top. Add a new Makefile, which
is only used when user attempts to run 'make' in the source tree.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
---
 Makefile     |  373 +---------------------------------------------------------
 Makefile.top |  367 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configure    |   51 ++++----
 3 files changed, 400 insertions(+), 391 deletions(-)
 create mode 100644 Makefile.top

 # temporary config to build submodules
 for rom in seabios vgabios ; do

Comments

Paolo Bonzini Nov. 17, 2010, 8 p.m. UTC | #1 
On 11/17/2010 08:15 PM, Blue Swirl wrote:
> If the user attempts to run 'configure' in the source tree,
> create an object directory and configure that instead.
>
> Rename topmost Makefile to Makefile.top. Add a new Makefile, which
> is only used when user attempts to run 'make' in the source tree.

Interesting, but what's the point?  It hardly simplifies code, since 
$source_path_used can be eliminated anyway...

Paolo
Blue Swirl Nov. 17, 2010, 8:08 p.m. UTC | #2 
On Wed, Nov 17, 2010 at 8:00 PM, Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 11/17/2010 08:15 PM, Blue Swirl wrote:
>>
>> If the user attempts to run 'configure' in the source tree,
>> create an object directory and configure that instead.
>>
>> Rename topmost Makefile to Makefile.top. Add a new Makefile, which
>> is only used when user attempts to run 'make' in the source tree.
>
> Interesting, but what's the point?  It hardly simplifies code, since
> $source_path_used can be eliminated anyway...

It's not simplification but to unify the build system. Some people
make changes to Makefiles and then test their changes without an
object directory, these may then break the build for those who use it.
This has happened several times already. Hopefully we can avoid those
breakages with this change.
Paolo Bonzini Nov. 17, 2010, 10:39 p.m. UTC | #3 
On 11/17/2010 09:08 PM, Blue Swirl wrote:
> It's not simplification but to unify the build system. Some people
> make changes to Makefiles and then test their changes without an
> object directory, these may then break the build for those who use it.
> This has happened several times already. Hopefully we can avoid those
> breakages with this change.

It happens very rarely, and the last time it was because the wrong patch 
was committed IIUC.  It may be unified but it's pretty much unlike every 
other build system I've ever seen.

Paolo
Peter Maydell Nov. 17, 2010, 11:05 p.m. UTC | #4 
On 17 November 2010 22:39, Paolo Bonzini <pbonzini@redhat.com> wrote:
> On 11/17/2010 09:08 PM, Blue Swirl wrote:
>> It's not simplification but to unify the build system. Some people
>> make changes to Makefiles and then test their changes without an
>> object directory, these may then break the build for those who use it.
>> This has happened several times already. Hopefully we can avoid those
>> breakages with this change.
>
> It happens very rarely, and the last time it was because the wrong patch was
> committed IIUC.

This time around what happened was that somebody using an
object directory broke the build for those of us who don't use one :-)

> It may be unified but it's pretty much unlike every other
> build system I've ever seen.

If you want another approach you could do what glibc does (IIRC),
which is to just give an error message if you invoke configure in
the source directory suggesting that you run it in a separate build
directory.

-- PMM
Paolo Bonzini Nov. 17, 2010, 11:51 p.m. UTC | #5 
On 11/18/2010 12:05 AM, Peter Maydell wrote:
>> >  It may be unified but it's pretty much unlike every other
>> >  build system I've ever seen.
> If you want another approach you could do what glibc does (IIRC),
> which is to just give an error message if you invoke configure in
> the source directory suggesting that you run it in a separate build
> directory.

Yes, that would be better.

Paolo
Anthony Liguori Nov. 17, 2010, 11:57 p.m. UTC | #6 
On 11/17/2010 04:39 PM, Paolo Bonzini wrote:
> On 11/17/2010 09:08 PM, Blue Swirl wrote:
>> It's not simplification but to unify the build system. Some people
>> make changes to Makefiles and then test their changes without an
>> object directory, these may then break the build for those who use it.
>> This has happened several times already. Hopefully we can avoid those
>> breakages with this change.
>
> It happens very rarely, and the last time it was because the wrong 
> patch was committed IIUC.  It may be unified but it's pretty much 
> unlike every other build system I've ever seen.

It's not that atypical.

Keep in mind, we already create per-target build directories and use 
them.  Building the rest of the objects in a different directory isn't 
really all that bizarre.

Regards,

Anthony Liguori

> Paolo
>
diff mbox

Patch

diff --git a/Makefile b/Makefile
index 747e47c..56016fa 100644
--- a/Makefile
+++ b/Makefile
@@ -1,367 +1,6 @@ 
-# Makefile for QEMU.
-
-GENERATED_HEADERS = config-host.h trace.h qemu-options.def
-ifeq ($(TRACE_BACKEND),dtrace)
-GENERATED_HEADERS += trace-dtrace.h
-endif
-
-ifneq ($(wildcard config-host.mak),)
-# Put the all: rule here so that config-host.mak can contain dependencies.
-all: build-all
-include config-host.mak
-include $(SRC_PATH)/rules.mak
-config-host.mak: $(SRC_PATH)/configure
-	@echo $@ is out-of-date, running configure
-	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
-else
-config-host.mak:
-	@echo "Please call configure before running make!"
-	@exit 1
-endif
-
-# Don't try to regenerate Makefile or configure
-# We don't generate any of them
-Makefile: ;
-configure: ;
-
-.PHONY: all clean cscope distclean dvi html info install install-doc \
-	pdf recurse-all speed tar tarbin test build-all
-
-$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
-
-LIBS+=-lz $(LIBS_TOOLS)
-
-ifdef BUILD_DOCS
-DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
QMP/qmp-commands.txt
-else
-DOCS=
-endif
-
-SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
-SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
-
-config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
-	$(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u >
$@,"  GEN   $@")
-
-%/config-devices.mak: default-configs/%.mak
-	$(call quiet-command,cat $< > $@.tmp, "  GEN   $@")
-	@if test -f $@; then \
-	  if cmp -s $@.old $@; then \
-	    if ! cmp -s $@ $@.tmp; then \
-	      mv $@.tmp $@; \
-	      cp -p $@ $@.old; \
-	    fi; \
-	  else \
-	    if test -f $@.old; then \
-	      echo "WARNING: $@ (user modified) out of date.";\
-	    else \
-	      echo "WARNING: $@ out of date.";\
-	    fi; \
-	    echo "Run \"make defconfig\" to regenerate."; \
-	    rm $@.tmp; \
-	  fi; \
-	 else \
-	  mv $@.tmp $@; \
-	  cp -p $@ $@.old; \
-	 fi
-
-defconfig:
-	rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
-
--include config-all-devices.mak
-
-build-all: $(DOCS) $(TOOLS) recurse-all
-
-config-host.h: config-host.h-timestamp
-config-host.h-timestamp: config-host.mak
-qemu-options.def: $(SRC_PATH)/qemu-options.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")
-
-SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
-
-subdir-%: $(GENERATED_HEADERS)
-	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)"
TARGET_DIR="$*/" all,)
-
-ifneq ($(wildcard config-host.mak),)
-include $(SRC_PATH)/Makefile.objs
-endif
-
-$(common-obj-y): $(GENERATED_HEADERS)
-$(filter %-softmmu,$(SUBDIR_RULES)): $(trace-obj-y) $(common-obj-y)
subdir-libdis
-
-$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) $(trace-obj-y)
subdir-libdis-user subdir-libuser
-
-ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
-romsubdir-%:
-	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$*
V="$(V)" TARGET_DIR="$*/",)
-
-ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
-
-recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
-
-audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
-
-QEMU_CFLAGS+=$(CURL_CFLAGS)
-
-ui/cocoa.o: ui/cocoa.m
-
-ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
-
-ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
-
-bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
-
-ifeq ($(TRACE_BACKEND),dtrace)
-trace.h: trace.h-timestamp trace-dtrace.h
-else
-trace.h: trace.h-timestamp
-endif
-trace.h-timestamp: $(SRC_PATH)/trace-events config-host.mak
-	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -h
< $< > $@,"  GEN   trace.h")
-	@cmp -s $@ trace.h || cp $@ trace.h
-
-trace.c: trace.c-timestamp
-trace.c-timestamp: $(SRC_PATH)/trace-events config-host.mak
-	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -c
< $< > $@,"  GEN   trace.c")
-	@cmp -s $@ trace.c || cp $@ trace.c
-
-trace.o: trace.c $(GENERATED_HEADERS)
-
-trace-dtrace.h: trace-dtrace.dtrace
-	$(call quiet-command,dtrace -o $@ -h -s $<, "  GEN   trace-dtrace.h")
-
-# Normal practice is to name DTrace probe file with a '.d' extension
-# but that gets picked up by QEMU's Makefile as an external dependancy
-# rule file. So we use '.dtrace' instead
-trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
-trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events config-host.mak
-	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -d
< $< > $@,"  GEN   trace-dtrace.dtrace")
-	@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
-
-trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
-	$(call quiet-command,dtrace -o $@ -G -s $<, "  GEN trace-dtrace.o")
-
-simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
-
-version.o: $(SRC_PATH)/version.rc config-host.mak
-	$(call quiet-command,$(WINDRES) -I. -o $@ $<,"  RC    $(TARGET_DIR)$@")
-
-version-obj-$(CONFIG_WIN32) += version.o
-######################################################################
-
-qemu-img.o: qemu-img-cmds.h
-qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o: $(GENERATED_HEADERS)
-
-qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y)
$(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y)
qemu-timer-common.o
-
-qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(oslib-obj-y)
$(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y)
qemu-timer-common.o
-
-qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o
$(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y)
$(version-obj-y) qemu-timer-common.o
-
-qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")
-
-check-qint.o check-qstring.o check-qdict.o check-qlist.o
check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
-
-check-qint: check-qint.o qint.o qemu-malloc.o $(trace-obj-y)
-check-qstring: check-qstring.o qstring.o qemu-malloc.o $(trace-obj-y)
-check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o
qemu-malloc.o qlist.o $(trace-obj-y)
-check-qlist: check-qlist.o qlist.o qint.o qemu-malloc.o $(trace-obj-y)
-check-qfloat: check-qfloat.o qfloat.o qemu-malloc.o $(trace-obj-y)
-check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o
qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o
qemu-malloc.o $(trace-obj-y)
-
-clean:
-# avoid old build problems by removing potentially incorrect old files
-	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h
opc-arm.h gen-op-arm.h
-	rm -f qemu-options.def
-	rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
-	rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d
-	rm -f qemu-img-cmds.h
-	rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
-	rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
-	rm -f trace-dtrace.h trace-dtrace.h-timestamp
-	$(MAKE) -C tests clean
-	for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser libdis libdis-user; do \
-	if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
-	rm -f $$d/qemu-options.def; \
-        done
-
-distclean: clean
-	rm -f config-host.mak config-host.h* config-host.ld $(DOCS)
qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
-	rm -f config-all-devices.mak
-	rm -f roms/seabios/config.mak roms/vgabios/config.mak
-	rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.dvi
qemu-doc.fn qemu-doc.info qemu-doc.ky qemu-doc.log qemu-doc.pdf
qemu-doc.pg qemu-doc.toc qemu-doc.tp qemu-doc.vr
-	rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi
qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf
qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
-	for d in $(TARGET_DIRS) libhw32 libhw64 libuser libdis libdis-user; do \
-	rm -rf $$d || exit 1 ; \
-        done
-
-KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
-ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
-common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr
-
-ifdef INSTALL_BLOBS
-BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin \
-vgabios-stdvga.bin vgabios-vmware.bin \
-ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \
-gpxe-eepro100-80861209.rom \
-gpxe-eepro100-80861229.rom \
-pxe-e1000.bin \
-pxe-ne2k_pci.bin pxe-pcnet.bin \
-pxe-rtl8139.bin pxe-virtio.bin \
-bamboo.dtb petalogix-s3adsp1800.dtb \
-multiboot.bin linuxboot.bin \
-s390-zipl.rom
-else
-BLOBS=
-endif
-
-install-doc: $(DOCS)
-	$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
-	$(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(docdir)"
-ifdef CONFIG_POSIX
-	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
-	$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
-	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
-	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
-endif
-
-install-sysconfig:
-	$(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
-	$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf
"$(DESTDIR)$(sysconfdir)/qemu"
-
-install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
-	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
-ifneq ($(TOOLS),)
-	$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
-endif
-ifneq ($(BLOBS),)
-	$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
-	set -e; for x in $(BLOBS); do \
-		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
-	done
-endif
-	$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
-	set -e; for x in $(KEYMAPS); do \
-		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x
"$(DESTDIR)$(datadir)/keymaps"; \
-	done
-	for d in $(TARGET_DIRS); do \
-	$(MAKE) -C $$d $@ || exit 1 ; \
-        done
-
-# various test targets
-test speed: all
-	$(MAKE) -C tests $@
-
-.PHONY: TAGS
-TAGS:
-	find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
-
-cscope:
-	rm -f ./cscope.*
-	find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
-	cscope -b
-
-# documentation
-MAKEINFO=makeinfo
-MAKEINFOFLAGS=--no-headers --no-split --number-sections
-TEXIFLAG=$(if $(V),,--quiet)
-%.dvi: %.texi
-	$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<,"  GEN   $@")
-
-%.html: %.texi
-	$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
-	"  GEN   $@")
-
-%.info: %.texi
-	$(call quiet-command,$(MAKEINFO) $< -o $@,"  GEN   $@")
-
-%.pdf: %.texi
-	$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<,"  GEN   $@")
-
-qemu-options.texi: $(SRC_PATH)/qemu-options.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
-
-qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
-
-QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -q < $< > $@,"  GEN   $@")
-
-qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
-	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
-
-qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
-	$(call quiet-command, \
-	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
-	  pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
-	  "  GEN   $@")
-
-qemu-img.1: qemu-img.texi qemu-img-cmds.texi
-	$(call quiet-command, \
-	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
-	  pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
-	  "  GEN   $@")
-
-qemu-nbd.8: qemu-nbd.texi
-	$(call quiet-command, \
-	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
-	  pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
-	  "  GEN   $@")
-
-dvi: qemu-doc.dvi qemu-tech.dvi
-html: qemu-doc.html qemu-tech.html
-info: qemu-doc.info qemu-tech.info
-pdf: qemu-doc.pdf qemu-tech.pdf
-
-qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
-	qemu-img.texi qemu-nbd.texi qemu-options.texi \
-	qemu-monitor.texi qemu-img-cmds.texi
-
-VERSION ?= $(shell cat VERSION)
-FILE = qemu-$(VERSION)
-
-# tar release (use 'make -k tar' on a checkouted tree)
-tar:
-	rm -rf /tmp/$(FILE)
-	cp -r . /tmp/$(FILE)
-	cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude
.git --exclude .svn
-	rm -rf /tmp/$(FILE)
-
-SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
-SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
-             $(patsubst %-softmmu,qemu-system-%, \
-             $(SYSTEM_TARGETS)))
-
-USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
-USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
-           $(patsubst %-darwin-user,qemu-%, \
-           $(patsubst %-linux-user,qemu-%, \
-           $(USER_TARGETS))))
-
-# generate a binary distribution
-tarbin:
-	cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
-	$(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
-	$(patsubst %,$(bindir)/%, $(USER_PROGS)) \
-	$(bindir)/qemu-img \
-	$(bindir)/qemu-nbd \
-	$(datadir)/bios.bin \
-	$(datadir)/vgabios.bin \
-	$(datadir)/vgabios-cirrus.bin \
-	$(datadir)/ppc_rom.bin \
-	$(datadir)/openbios-sparc32 \
-	$(datadir)/openbios-sparc64 \
-	$(datadir)/openbios-ppc \
-	$(datadir)/pxe-ne2k_pci.bin \
-	$(datadir)/pxe-rtl8139.bin \
-	$(datadir)/pxe-pcnet.bin \
-	$(datadir)/pxe-e1000.bin \
-	$(docdir)/qemu-doc.html \
-	$(docdir)/qemu-tech.html \
-	$(mandir)/man1/qemu.1 \
-	$(mandir)/man1/qemu-img.1 \
-	$(mandir)/man8/qemu-nbd.8
-
-# Include automatically generated dependency files
--include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d)
+all clean distclean defconfig install install-doc install-sysconfig
test speed TAGS cscope tar tarbin:
+	@if ! test -d obj; then \
+	  echo "Please call 'configure' before running 'make'"; \
+	else \
+	  $(MAKE) -C obj $@; \
+	fi
diff --git a/Makefile.top b/Makefile.top
new file mode 100644
index 0000000..747e47c
--- /dev/null
+++ b/Makefile.top
@@ -0,0 +1,367 @@ 
+# Makefile for QEMU.
+
+GENERATED_HEADERS = config-host.h trace.h qemu-options.def
+ifeq ($(TRACE_BACKEND),dtrace)
+GENERATED_HEADERS += trace-dtrace.h
+endif
+
+ifneq ($(wildcard config-host.mak),)
+# Put the all: rule here so that config-host.mak can contain dependencies.
+all: build-all
+include config-host.mak
+include $(SRC_PATH)/rules.mak
+config-host.mak: $(SRC_PATH)/configure
+	@echo $@ is out-of-date, running configure
+	@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
+else
+config-host.mak:
+	@echo "Please call configure before running make!"
+	@exit 1
+endif
+
+# Don't try to regenerate Makefile or configure
+# We don't generate any of them
+Makefile: ;
+configure: ;
+
+.PHONY: all clean cscope distclean dvi html info install install-doc \
+	pdf recurse-all speed tar tarbin test build-all
+
+$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
+
+LIBS+=-lz $(LIBS_TOOLS)
+
+ifdef BUILD_DOCS
+DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
QMP/qmp-commands.txt
+else
+DOCS=
+endif
+
+SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
+SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
+
+config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
+	$(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u >
$@,"  GEN   $@")
+
+%/config-devices.mak: default-configs/%.mak
+	$(call quiet-command,cat $< > $@.tmp, "  GEN   $@")
+	@if test -f $@; then \
+	  if cmp -s $@.old $@; then \
+	    if ! cmp -s $@ $@.tmp; then \
+	      mv $@.tmp $@; \
+	      cp -p $@ $@.old; \
+	    fi; \
+	  else \
+	    if test -f $@.old; then \
+	      echo "WARNING: $@ (user modified) out of date.";\
+	    else \
+	      echo "WARNING: $@ out of date.";\
+	    fi; \
+	    echo "Run \"make defconfig\" to regenerate."; \
+	    rm $@.tmp; \
+	  fi; \
+	 else \
+	  mv $@.tmp $@; \
+	  cp -p $@ $@.old; \
+	 fi
+
+defconfig:
+	rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
+
+-include config-all-devices.mak
+
+build-all: $(DOCS) $(TOOLS) recurse-all
+
+config-host.h: config-host.h-timestamp
+config-host.h-timestamp: config-host.mak
+qemu-options.def: $(SRC_PATH)/qemu-options.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")
+
+SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
+
+subdir-%: $(GENERATED_HEADERS)
+	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)"
TARGET_DIR="$*/" all,)
+
+ifneq ($(wildcard config-host.mak),)
+include $(SRC_PATH)/Makefile.objs
+endif
+
+$(common-obj-y): $(GENERATED_HEADERS)
+$(filter %-softmmu,$(SUBDIR_RULES)): $(trace-obj-y) $(common-obj-y)
subdir-libdis
+
+$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) $(trace-obj-y)
subdir-libdis-user subdir-libuser
+
+ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
+romsubdir-%:
+	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$*
V="$(V)" TARGET_DIR="$*/",)
+
+ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
+
+recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
+
+audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
+
+QEMU_CFLAGS+=$(CURL_CFLAGS)
+
+ui/cocoa.o: ui/cocoa.m
+
+ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
+
+ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
+
+bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
+
+ifeq ($(TRACE_BACKEND),dtrace)
+trace.h: trace.h-timestamp trace-dtrace.h
+else
+trace.h: trace.h-timestamp
+endif
+trace.h-timestamp: $(SRC_PATH)/trace-events config-host.mak
+	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -h
< $< > $@,"  GEN   trace.h")
+	@cmp -s $@ trace.h || cp $@ trace.h
+
+trace.c: trace.c-timestamp
+trace.c-timestamp: $(SRC_PATH)/trace-events config-host.mak
+	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -c
< $< > $@,"  GEN   trace.c")
+	@cmp -s $@ trace.c || cp $@ trace.c
+
+trace.o: trace.c $(GENERATED_HEADERS)
+
+trace-dtrace.h: trace-dtrace.dtrace
+	$(call quiet-command,dtrace -o $@ -h -s $<, "  GEN   trace-dtrace.h")
+
+# Normal practice is to name DTrace probe file with a '.d' extension
+# but that gets picked up by QEMU's Makefile as an external dependancy
+# rule file. So we use '.dtrace' instead
+trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
+trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events config-host.mak
+	$(call quiet-command,sh $(SRC_PATH)/tracetool --$(TRACE_BACKEND) -d
< $< > $@,"  GEN   trace-dtrace.dtrace")
+	@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
+
+trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
+	$(call quiet-command,dtrace -o $@ -G -s $<, "  GEN trace-dtrace.o")
+
+simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
+
+version.o: $(SRC_PATH)/version.rc config-host.mak
+	$(call quiet-command,$(WINDRES) -I. -o $@ $<,"  RC    $(TARGET_DIR)$@")
+
+version-obj-$(CONFIG_WIN32) += version.o
+######################################################################
+
+qemu-img.o: qemu-img-cmds.h
+qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o: $(GENERATED_HEADERS)
+
+qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y)
$(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y)
qemu-timer-common.o
+
+qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(oslib-obj-y)
$(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y)
qemu-timer-common.o
+
+qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o
$(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y)
$(version-obj-y) qemu-timer-common.o
+
+qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")
+
+check-qint.o check-qstring.o check-qdict.o check-qlist.o
check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
+
+check-qint: check-qint.o qint.o qemu-malloc.o $(trace-obj-y)
+check-qstring: check-qstring.o qstring.o qemu-malloc.o $(trace-obj-y)
+check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o
qemu-malloc.o qlist.o $(trace-obj-y)
+check-qlist: check-qlist.o qlist.o qint.o qemu-malloc.o $(trace-obj-y)
+check-qfloat: check-qfloat.o qfloat.o qemu-malloc.o $(trace-obj-y)
+check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o
qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o
qemu-malloc.o $(trace-obj-y)
+
+clean:
+# avoid old build problems by removing potentially incorrect old files
+	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h
opc-arm.h gen-op-arm.h
+	rm -f qemu-options.def
+	rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
+	rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d
+	rm -f qemu-img-cmds.h
+	rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
+	rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
+	rm -f trace-dtrace.h trace-dtrace.h-timestamp
+	$(MAKE) -C tests clean
+	for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser libdis libdis-user; do \
+	if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
+	rm -f $$d/qemu-options.def; \
+        done
+
+distclean: clean
+	rm -f config-host.mak config-host.h* config-host.ld $(DOCS)
qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
+	rm -f config-all-devices.mak
+	rm -f roms/seabios/config.mak roms/vgabios/config.mak
+	rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.dvi
qemu-doc.fn qemu-doc.info qemu-doc.ky qemu-doc.log qemu-doc.pdf
qemu-doc.pg qemu-doc.toc qemu-doc.tp qemu-doc.vr
+	rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi
qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf
qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
+	for d in $(TARGET_DIRS) libhw32 libhw64 libuser libdis libdis-user; do \
+	rm -rf $$d || exit 1 ; \
+        done
+
+KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
+ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
+common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr
+
+ifdef INSTALL_BLOBS
+BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin \
+vgabios-stdvga.bin vgabios-vmware.bin \
+ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \
+gpxe-eepro100-80861209.rom \
+gpxe-eepro100-80861229.rom \
+pxe-e1000.bin \
+pxe-ne2k_pci.bin pxe-pcnet.bin \
+pxe-rtl8139.bin pxe-virtio.bin \
+bamboo.dtb petalogix-s3adsp1800.dtb \
+multiboot.bin linuxboot.bin \
+s390-zipl.rom
+else
+BLOBS=
+endif
+
+install-doc: $(DOCS)
+	$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
+	$(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(docdir)"
+ifdef CONFIG_POSIX
+	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
+	$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
+	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
+	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
+endif
+
+install-sysconfig:
+	$(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
+	$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf
"$(DESTDIR)$(sysconfdir)/qemu"
+
+install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
+	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
+ifneq ($(TOOLS),)
+	$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
+endif
+ifneq ($(BLOBS),)
+	$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
+	set -e; for x in $(BLOBS); do \
+		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
+	done
+endif
+	$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
+	set -e; for x in $(KEYMAPS); do \
+		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x
"$(DESTDIR)$(datadir)/keymaps"; \
+	done
+	for d in $(TARGET_DIRS); do \
+	$(MAKE) -C $$d $@ || exit 1 ; \
+        done
+
+# various test targets
+test speed: all
+	$(MAKE) -C tests $@
+
+.PHONY: TAGS
+TAGS:
+	find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
+
+cscope:
+	rm -f ./cscope.*
+	find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
+	cscope -b
+
+# documentation
+MAKEINFO=makeinfo
+MAKEINFOFLAGS=--no-headers --no-split --number-sections
+TEXIFLAG=$(if $(V),,--quiet)
+%.dvi: %.texi
+	$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<,"  GEN   $@")
+
+%.html: %.texi
+	$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
+	"  GEN   $@")
+
+%.info: %.texi
+	$(call quiet-command,$(MAKEINFO) $< -o $@,"  GEN   $@")
+
+%.pdf: %.texi
+	$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<,"  GEN   $@")
+
+qemu-options.texi: $(SRC_PATH)/qemu-options.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
+
+qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
+
+QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -q < $< > $@,"  GEN   $@")
+
+qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
+	$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
+
+qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
+	$(call quiet-command, \
+	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
+	  pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
+	  "  GEN   $@")
+
+qemu-img.1: qemu-img.texi qemu-img-cmds.texi
+	$(call quiet-command, \
+	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
+	  pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
+	  "  GEN   $@")
+
+qemu-nbd.8: qemu-nbd.texi
+	$(call quiet-command, \
+	  perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
+	  pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
+	  "  GEN   $@")
+
+dvi: qemu-doc.dvi qemu-tech.dvi
+html: qemu-doc.html qemu-tech.html
+info: qemu-doc.info qemu-tech.info
+pdf: qemu-doc.pdf qemu-tech.pdf
+
+qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
+	qemu-img.texi qemu-nbd.texi qemu-options.texi \
+	qemu-monitor.texi qemu-img-cmds.texi
+
+VERSION ?= $(shell cat VERSION)
+FILE = qemu-$(VERSION)
+
+# tar release (use 'make -k tar' on a checkouted tree)
+tar:
+	rm -rf /tmp/$(FILE)
+	cp -r . /tmp/$(FILE)
+	cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude
.git --exclude .svn
+	rm -rf /tmp/$(FILE)
+
+SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
+SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
+             $(patsubst %-softmmu,qemu-system-%, \
+             $(SYSTEM_TARGETS)))
+
+USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
+USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
+           $(patsubst %-darwin-user,qemu-%, \
+           $(patsubst %-linux-user,qemu-%, \
+           $(USER_TARGETS))))
+
+# generate a binary distribution
+tarbin:
+	cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
+	$(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
+	$(patsubst %,$(bindir)/%, $(USER_PROGS)) \
+	$(bindir)/qemu-img \
+	$(bindir)/qemu-nbd \
+	$(datadir)/bios.bin \
+	$(datadir)/vgabios.bin \
+	$(datadir)/vgabios-cirrus.bin \
+	$(datadir)/ppc_rom.bin \
+	$(datadir)/openbios-sparc32 \
+	$(datadir)/openbios-sparc64 \
+	$(datadir)/openbios-ppc \
+	$(datadir)/pxe-ne2k_pci.bin \
+	$(datadir)/pxe-rtl8139.bin \
+	$(datadir)/pxe-pcnet.bin \
+	$(datadir)/pxe-e1000.bin \
+	$(docdir)/qemu-doc.html \
+	$(docdir)/qemu-tech.html \
+	$(mandir)/man1/qemu.1 \
+	$(mandir)/man1/qemu-img.1 \
+	$(mandir)/man8/qemu-nbd.8
+
+# Include automatically generated dependency files
+-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d)
diff --git a/configure b/configure
index e560f87..ac7e220 100755
--- a/configure
+++ b/configure
@@ -500,14 +500,17 @@  fi

 # find source path
 source_path=`dirname "$0"`
-source_path_used="no"
 workdir=`pwd`
 if [ -z "$source_path" ]; then
     source_path=$workdir
 else
     source_path=`cd "$source_path"; pwd`
 fi
-[ -f "$workdir/vl.c" ] || source_path_used="yes"
+if [ "$source_path" = "$workdir" ]; then
+    # Force object directory use
+    mkdir -p obj
+    cd obj
+fi

 werror=""

@@ -521,7 +524,6 @@  for opt do
   --interp-prefix=*) interp_prefix="$optarg"
   ;;
   --source-path=*) source_path="$optarg"
-  source_path_used="yes"
   ;;
   --cross-prefix=*)
   ;;
@@ -3119,27 +3121,28 @@  echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
 done # for target in $targets

 # build tree in object directory if source path is different from current one
-if test "$source_path_used" = "yes" ; then
-    DIRS="tests tests/cris slirp audio block net pc-bios/optionrom"
-    DIRS="$DIRS roms/seabios roms/vgabios"
-    DIRS="$DIRS fsdev ui"
-    FILES="Makefile tests/Makefile"
-    FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit"
-    FILES="$FILES tests/test-mmap.c"
-    FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
-    FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
-    for bios_file in $source_path/pc-bios/*.bin
$source_path/pc-bios/*.dtb $source_path/pc-bios/openbios-*; do
-        FILES="$FILES pc-bios/`basename $bios_file`"
-    done
-    for dir in $DIRS ; do
-            mkdir -p $dir
-    done
-    # remove the link and recreate it, as not all "ln -sf" overwrite the link
-    for f in $FILES ; do
-        rm -f $f
-        ln -s $source_path/$f $f
-    done
-fi
+DIRS="tests tests/cris slirp audio block net pc-bios/optionrom"
+DIRS="$DIRS roms/seabios roms/vgabios"
+DIRS="$DIRS fsdev ui"
+FILES="tests/Makefile"
+FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit"
+FILES="$FILES tests/test-mmap.c"
+FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
+FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
+for bios_file in $source_path/pc-bios/*.bin
$source_path/pc-bios/*.dtb $source_path/pc-bios/openbios-*; do
+    FILES="$FILES pc-bios/`basename $bios_file`"
+done
+for dir in $DIRS ; do
+    mkdir -p $dir
+done
+
+ln -s $source_path/Makefile.top Makefile
+
+# remove the link and recreate it, as not all "ln -sf" overwrite the link
+for f in $FILES ; do
+    rm -f $f
+    ln -s $source_path/$f $f
+done