Message ID | 20170621035349.4125-6-zboszor@pr.hu |
---|---|
State | Superseded |
Headers | show |
On Wed, Jun 21, 2017 at 05:53:49AM +0200, Zoltán Böszörményi wrote: > Use the new request_declared_muxed_region() macro to synchronize > accesses to the SB800 I/O port pair (0xcd6 / 0xcd7) with the > PCI quirk for isochronous USB transfers and with the i2c-piix4 > driver. > > At the same time, remove the long lifetime request_region() call > to reserve these I/O ports, similarly to i2c-piix4 so the code is > now uniform across the three drivers. > > Signed-off-by: Zoltán Böszörményi <zboszor@pr.hu> > --- > drivers/watchdog/sp5100_tco.c | 25 ++++++++++++------------- > 1 file changed, 12 insertions(+), 13 deletions(-) > > diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c > index 028618c..9bb3bcb 100644 > --- a/drivers/watchdog/sp5100_tco.c > +++ b/drivers/watchdog/sp5100_tco.c > @@ -48,7 +48,6 @@ > static u32 tcobase_phys; > static u32 tco_wdt_fired; > static void __iomem *tcobase; > -static unsigned int pm_iobase; > static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ > static unsigned long timer_alive; > static char tco_expect_close; > @@ -134,11 +133,13 @@ static int tco_timer_set_heartbeat(int t) > > static void tco_timer_enable(void) > { > + struct resource res = DEFINE_RES_IO_NAMED(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME); Is it necessary to have this as a local variable ? If not, please declare as static variable. Either case, please run our patches through checkpatch and address any problems it reports. > int val; > > if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) { > /* For SB800 or later */ > /* Set the Watchdog timer resolution to 1 sec */ > + request_declared_muxed_region(&res); > outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG); > val = inb(SB800_IO_PM_DATA_REG); > val |= SB800_PM_WATCHDOG_SECOND_RES; > @@ -150,6 +151,7 @@ static void tco_timer_enable(void) > val |= SB800_PCI_WATCHDOG_DECODE_EN; > val &= ~SB800_PM_WATCHDOG_DISABLE; > outb(val, SB800_IO_PM_DATA_REG); > + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); > } else { > /* For SP5100 or SB7x0 */ > /* Enable watchdog decode bit */ > @@ -164,11 +166,13 @@ static void tco_timer_enable(void) > val); > > /* Enable Watchdog timer and set the resolution to 1 sec */ > + request_declared_muxed_region(&res); > outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG); > val = inb(SP5100_IO_PM_DATA_REG); > val |= SP5100_PM_WATCHDOG_SECOND_RES; > val &= ~SP5100_PM_WATCHDOG_DISABLE; > outb(val, SP5100_IO_PM_DATA_REG); > + release_region(SB800_IO_PM_INDEX_REG, 2); > } > } > > @@ -326,6 +330,7 @@ MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl); > */ > static unsigned char sp5100_tco_setupdevice(void) > { > + struct resource res = DEFINE_RES_IO_NAMED(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME); > struct pci_dev *dev = NULL; > const char *dev_name = NULL; > u32 val; > @@ -361,16 +366,10 @@ static unsigned char sp5100_tco_setupdevice(void) > base_addr = SB800_PM_WATCHDOG_BASE; > } > > - /* Request the IO ports used by this driver */ > - pm_iobase = SP5100_IO_PM_INDEX_REG; > - if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) { > - pr_err("I/O address 0x%04x already in use\n", pm_iobase); > - goto exit; > - } > - > /* > * First, Find the watchdog timer MMIO address from indirect I/O. > */ > + request_declared_muxed_region(&res); > outb(base_addr+3, index_reg); > val = inb(data_reg); > outb(base_addr+2, index_reg); > @@ -380,6 +379,7 @@ static unsigned char sp5100_tco_setupdevice(void) > outb(base_addr+0, index_reg); > /* Low three bits of BASE are reserved */ > val = val << 8 | (inb(data_reg) & 0xf8); > + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); > > pr_debug("Got 0x%04x from indirect I/O\n", val); > > @@ -400,6 +400,7 @@ static unsigned char sp5100_tco_setupdevice(void) > SP5100_SB_RESOURCE_MMIO_BASE, &val); > } else { > /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */ > + request_declared_muxed_region(&res); > outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG); > val = inb(SB800_IO_PM_DATA_REG); > outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG); > @@ -408,6 +409,7 @@ static unsigned char sp5100_tco_setupdevice(void) > val = val << 8 | inb(SB800_IO_PM_DATA_REG); > outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG); > val = val << 8 | inb(SB800_IO_PM_DATA_REG); > + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); > } > > /* The SBResource_MMIO is enabled and mapped memory space? */ > @@ -429,7 +431,7 @@ static unsigned char sp5100_tco_setupdevice(void) > pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val); > > pr_notice("failed to find MMIO address, giving up.\n"); > - goto unreg_region; > + goto exit; > > setup_wdt: > tcobase_phys = val; > @@ -469,8 +471,6 @@ static unsigned char sp5100_tco_setupdevice(void) > > unreg_mem_region: > release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); > -unreg_region: > - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); > exit: > return 0; > } > @@ -517,7 +517,7 @@ static int sp5100_tco_init(struct platform_device *dev) > exit: > iounmap(tcobase); > release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); > - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); > + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); > return ret; > } > > @@ -531,7 +531,6 @@ static void sp5100_tco_cleanup(void) > misc_deregister(&sp5100_tco_miscdev); > iounmap(tcobase); > release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); > - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); > } > > static int sp5100_tco_remove(struct platform_device *dev) > -- > 2.9.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 028618c..9bb3bcb 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -48,7 +48,6 @@ static u32 tcobase_phys; static u32 tco_wdt_fired; static void __iomem *tcobase; -static unsigned int pm_iobase; static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ static unsigned long timer_alive; static char tco_expect_close; @@ -134,11 +133,13 @@ static int tco_timer_set_heartbeat(int t) static void tco_timer_enable(void) { + struct resource res = DEFINE_RES_IO_NAMED(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME); int val; if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) { /* For SB800 or later */ /* Set the Watchdog timer resolution to 1 sec */ + request_declared_muxed_region(&res); outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG); val = inb(SB800_IO_PM_DATA_REG); val |= SB800_PM_WATCHDOG_SECOND_RES; @@ -150,6 +151,7 @@ static void tco_timer_enable(void) val |= SB800_PCI_WATCHDOG_DECODE_EN; val &= ~SB800_PM_WATCHDOG_DISABLE; outb(val, SB800_IO_PM_DATA_REG); + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); } else { /* For SP5100 or SB7x0 */ /* Enable watchdog decode bit */ @@ -164,11 +166,13 @@ static void tco_timer_enable(void) val); /* Enable Watchdog timer and set the resolution to 1 sec */ + request_declared_muxed_region(&res); outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG); val = inb(SP5100_IO_PM_DATA_REG); val |= SP5100_PM_WATCHDOG_SECOND_RES; val &= ~SP5100_PM_WATCHDOG_DISABLE; outb(val, SP5100_IO_PM_DATA_REG); + release_region(SB800_IO_PM_INDEX_REG, 2); } } @@ -326,6 +330,7 @@ MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl); */ static unsigned char sp5100_tco_setupdevice(void) { + struct resource res = DEFINE_RES_IO_NAMED(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE, TCO_MODULE_NAME); struct pci_dev *dev = NULL; const char *dev_name = NULL; u32 val; @@ -361,16 +366,10 @@ static unsigned char sp5100_tco_setupdevice(void) base_addr = SB800_PM_WATCHDOG_BASE; } - /* Request the IO ports used by this driver */ - pm_iobase = SP5100_IO_PM_INDEX_REG; - if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) { - pr_err("I/O address 0x%04x already in use\n", pm_iobase); - goto exit; - } - /* * First, Find the watchdog timer MMIO address from indirect I/O. */ + request_declared_muxed_region(&res); outb(base_addr+3, index_reg); val = inb(data_reg); outb(base_addr+2, index_reg); @@ -380,6 +379,7 @@ static unsigned char sp5100_tco_setupdevice(void) outb(base_addr+0, index_reg); /* Low three bits of BASE are reserved */ val = val << 8 | (inb(data_reg) & 0xf8); + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); pr_debug("Got 0x%04x from indirect I/O\n", val); @@ -400,6 +400,7 @@ static unsigned char sp5100_tco_setupdevice(void) SP5100_SB_RESOURCE_MMIO_BASE, &val); } else { /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */ + request_declared_muxed_region(&res); outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG); val = inb(SB800_IO_PM_DATA_REG); outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG); @@ -408,6 +409,7 @@ static unsigned char sp5100_tco_setupdevice(void) val = val << 8 | inb(SB800_IO_PM_DATA_REG); outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG); val = val << 8 | inb(SB800_IO_PM_DATA_REG); + release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); } /* The SBResource_MMIO is enabled and mapped memory space? */ @@ -429,7 +431,7 @@ static unsigned char sp5100_tco_setupdevice(void) pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val); pr_notice("failed to find MMIO address, giving up.\n"); - goto unreg_region; + goto exit; setup_wdt: tcobase_phys = val; @@ -469,8 +471,6 @@ static unsigned char sp5100_tco_setupdevice(void) unreg_mem_region: release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); -unreg_region: - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); exit: return 0; } @@ -517,7 +517,7 @@ static int sp5100_tco_init(struct platform_device *dev) exit: iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); + release_region(SB800_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE); return ret; } @@ -531,7 +531,6 @@ static void sp5100_tco_cleanup(void) misc_deregister(&sp5100_tco_miscdev); iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); } static int sp5100_tco_remove(struct platform_device *dev)
Use the new request_declared_muxed_region() macro to synchronize accesses to the SB800 I/O port pair (0xcd6 / 0xcd7) with the PCI quirk for isochronous USB transfers and with the i2c-piix4 driver. At the same time, remove the long lifetime request_region() call to reserve these I/O ports, similarly to i2c-piix4 so the code is now uniform across the three drivers. Signed-off-by: Zoltán Böszörményi <zboszor@pr.hu> --- drivers/watchdog/sp5100_tco.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-)