diff mbox

[net-next] net: phy: lxt: Export link partner advertising

Message ID 20170619141308.9417A508705@solo.franken.de
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Thomas Bogendoerfer June 19, 2017, 2 p.m. UTC 
From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

Provide link partner advertising information.
Removed testing for gigabit modes, which is useless for a fast ethernet phy.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
 drivers/net/phy/lxt.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

Comments

Andrew Lunn June 20, 2017, 2:30 p.m. UTC | #1 
On Mon, Jun 19, 2017 at 04:00:22PM +0200, Thomas Bogendoerfer wrote:
> From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> 
> Provide link partner advertising information.
> Removed testing for gigabit modes, which is useless for a fast ethernet phy.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
David Miller June 20, 2017, 5:41 p.m. UTC | #2 
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Mon, 19 Jun 2017 16:00:22 +0200

> From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> 
> Provide link partner advertising information.
> Removed testing for gigabit modes, which is useless for a fast ethernet phy.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>

Applied, thank you.
diff mbox

Patch

diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 8d198a1f0031..09d215177fff 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -152,7 +152,6 @@  static int lxt973a2_read_status(struct phy_device *phydev)
 	int adv;
 	int err;
 	int lpa;
-	int lpagb = 0;
 
 	/* Update the link, but return if there was an error */
 	err = lxt973a2_update_link(phydev);
@@ -178,18 +177,15 @@  static int lxt973a2_read_status(struct phy_device *phydev)
 			*/
 		} while (lpa == adv && retry--);
 
+		phydev->lp_advertising = mii_lpa_to_ethtool_lpa_t(lpa);
+
 		lpa &= adv;
 
 		phydev->speed = SPEED_10;
 		phydev->duplex = DUPLEX_HALF;
 		phydev->pause = phydev->asym_pause = 0;
 
-		if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
-			phydev->speed = SPEED_1000;
-
-			if (lpagb & LPA_1000FULL)
-				phydev->duplex = DUPLEX_FULL;
-		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+		if (lpa & (LPA_100FULL | LPA_100HALF)) {
 			phydev->speed = SPEED_100;
 
 			if (lpa & LPA_100FULL)
@@ -222,6 +218,7 @@  static int lxt973a2_read_status(struct phy_device *phydev)
 			phydev->speed = SPEED_10;
 
 		phydev->pause = phydev->asym_pause = 0;
+		phydev->lp_advertising = 0;
 	}
 
 	return 0;